scholarly journals A Self-Powered Triboelectric Nanosensor for PH Detection

2016 ◽  
Vol 2016 ◽  
pp. 1-6 ◽  
Author(s):  
Ying Wu ◽  
Yuanjie Su ◽  
Junjie Bai ◽  
Guang Zhu ◽  
Xiaoyun Zhang ◽  
...  
Keyword(s):  
Output Voltage ◽  
Ph Value ◽  
Coupling Effect ◽  
Cost Effective ◽  
Triboelectric Nanogenerator ◽  
Electrostatic Induction ◽  
Periodic Contact ◽  
Self Powered ◽  
Value Measurement ◽  
Fluorinated Ethylene Propylene

A self-powered, sliding electrification based triboelectric sensor was developed for detecting PH value from a periodic contact/separation motion. This innovative, cost-effective, simply designed sensor is composed of a fluorinated ethylene propylene thin film and an array of electrodes underneath. The operation of the TENG (triboelectric nanogenerator) sensor relies on a repetitive emerging-submerging process with traveling solution waves, in which the coupling between triboelectrification and electrostatic induction gives rise to alternating flows of electrons between electrodes. On the basis of coupling effect between triboelectrification and electrostatic induction, the sensor generates electric output signals which are associated with PH value. Experimental results show that the output voltage of the TENG sensor increases with the increasing PH value, which indicate that the PH value of different solution can be real-time monitored. This work not only demonstrates a new principle in the field of PH value measurement but also greatly expands the applicability of triboelectric nanogenerator (TENG) as self-powered sensors.

scholarly journals A Self-Powered Vector Angle/Displacement Sensor Based on Triboelectric Nanogenerator

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 231
Author(s):  
Chengyu Li ◽  
Ziming Wang ◽  
Sheng Shu ◽  
Wei Tang
Keyword(s):  
Real Time ◽  
Coupling Effect ◽  
Displacement Sensor ◽  
Triboelectric Nanogenerator ◽  
Peak Voltage ◽  
Electrostatic Induction ◽  
Electrode Displacement ◽  
Vector Angle ◽  
Self Powered ◽  
Triboelectric Nanogenerators

Recently, grating-structured triboelectric nanogenerators (TENG) operating in freestanding mode have been the subject of intensive research. However, standard TENGs based on interdigital electrode structures are unable to realize real-time sensing of the direction of the freestanding electrode movement. Here, a newly designed TENG, consisting of one group of grating freestanding electrodes and three groups of interdigitated induction electrodes with the identical period, has been demonstrated as a self-powered vector angle/displacement sensor (SPVS), capable of distinguishing the real-time direction of the freestanding electrode displacement. Thanks to the unique coupling effect between triboelectrification and electrostatic induction, periodic alternating voltage signals are generated in response to the rotation/sliding movement of the top freestanding electrodes on the bottom electrodes. The output peak-to-peak voltage of the SPVS can reach as high as 300 V at the rotation rate of 48 rpm and at the sliding velocity of 0.1 m/s, respectively. The resolution of the sensor reaches 8°/5 mm and can be further enhanced by decreasing the width of the electrodes. This present work not only demonstrates a novel method for angle/displacement detection but also greatly expands the applicability of TENG as self-powered vector sensors.

A new insight into ZIF-67 based triboelectric nanogenerator for self-powered robot object recognition

2021 ◽  
Author(s):  
Sugato Hajra ◽  
Manisha Sahu ◽  
Aneeta Manjari Padhan ◽  
Jaykishon Swain ◽  
Basanta Kumar Panigrahi ◽  
...  
Keyword(s):  
Object Recognition ◽  
Mechanical Energy ◽  
Power Source ◽  
Triboelectric Nanogenerator ◽  
Electrostatic Induction ◽  
Self Powered ◽  
Insight Into

Harvesting mechanical energy from surroundings can be a promising power source for micro/nano-devices. The triboelectric nanogenerator (TENG) works in the principle of triboelectrification and electrostatic induction. So far, the metals...

scholarly journals A Two-Degree-of-Freedom Cantilever-Based Vibration Triboelectric Nanogenerator for Low-Frequency and Broadband Operation

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1526 ◽  
Author(s):  
Gang Tang ◽  
Fang Cheng ◽  
Xin Hu ◽  
Bo Huang ◽  
Bin Xu ◽  
...  
Keyword(s):  
Output Voltage ◽  
Low Frequency ◽  
Degree Of Freedom ◽  
Triboelectric Nanogenerator ◽  
Energy Harvesters ◽  
Harvesting Technique ◽  
Wide Range ◽  
Operating Bandwidth ◽  
Self Powered ◽  
Two Degree Of Freedom

With the continual increasing application requirements of broadband vibration energy harvesters (VEHs), many attempts have been made to broaden the bandwidth. As compared to adopted only a single approach, integration of multi-approaches can further widen the operating bandwidth. Here, a novel two-degree-of-freedom cantilever-based vibration triboelectric nanogenerator is proposed to obtain high operating bandwidth by integrating multimodal harvesting technique and inherent nonlinearity broadening behavior due to vibration contact between triboelectric surfaces. A wide operating bandwidth of 32.9 Hz is observed even at a low acceleration of 0.6 g. Meanwhile, the peak output voltage is 18.8 V at the primary resonant frequency of 23 Hz and 1 g, while the output voltage is 14.9 V at the secondary frequency of 75 Hz and 2.5 g. Under the frequencies of these two modes at 1 g, maximum peak power of 43.08 μW and 12.5 μW are achieved, respectively. Additionally, the fabricated device shows good stability, reaching and maintaining its voltage at 8 V when tested on a vacuum compression pump. The experimental results demonstrate the device has the ability to harvest energy from a wide range of low-frequency (<100 Hz) vibrations and has broad application prospects in self-powered electronic devices and systems.

scholarly journals Mesoporous Highly-Deformable Composite Polymer for a Gapless Triboelectric Nanogenerator via a One-Step Metal Oxidation Process

Micromachines ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 656 ◽  
Author(s):  
Hee Hwang ◽  
Younghoon Lee ◽  
Choongyeop Lee ◽  
Youngsuk Nam ◽  
Jinhyoung Park ◽  
...  
Keyword(s):  
Large Scale ◽  
Cost Effective ◽  
Triboelectric Nanogenerator ◽  
Pressure Sensitivity ◽  
Composite Polymer ◽  
Pdms Film ◽  
One Step ◽  
Self Powered ◽  
Triboelectric Nanogenerators ◽  
Flake Structure

The oxidation of metal microparticles (MPs) in a polymer film yields a mesoporous highly-deformable composite polymer for enhancing performance and creating a gapless structure of triboelectric nanogenerators (TENGs). This is a one-step scalable synthesis for developing large-scale, cost-effective, and light-weight mesoporous polymer composites. We demonstrate mesoporous aluminum oxide (Al2O3) polydimethylsiloxane (PDMS) composites with a nano-flake structure on the surface of Al2O3 MPs in pores. The porosity of mesoporous Al2O3-PDMS films reaches 71.35% as the concentration of Al MPs increases to 15%. As a result, the film capacitance is enhanced 1.8 times, and TENG output performance is 6.67-times greater at 33.3 kPa and 4 Hz. The pressure sensitivity of 6.71 V/kPa and 0.18 μA/kPa is determined under the pressure range of 5.5–33.3 kPa. Based on these structures, we apply mesoporous Al2O3-PDMS film to a gapless TENG structure and obtain a linear pressure sensitivity of 1.00 V/kPa and 0.02 μA/kPa, respectively. Finally, we demonstrate self-powered safety cushion sensors for monitoring human sitting position by using gapless TENGs, which are developed with a large-scale and highly-deformable mesoporous Al2O3-PDMS film with dimensions of 6 × 5 pixels (33 × 27 cm2).

scholarly journals A constant current triboelectric nanogenerator arising from electrostatic breakdown

2019 ◽  
Vol 5 (4) ◽  
pp. eaav6437 ◽  
Author(s):  
Di Liu ◽  
Xing Yin ◽  
Hengyu Guo ◽  
Linglin Zhou ◽  
Xinyuan Li ◽  
...  
Keyword(s):  
Mechanical Energy ◽  
Constant Current ◽  
Triboelectric Nanogenerator ◽  
The Novel ◽  
Electrostatic Induction ◽  
Self Powered ◽  
Output Characteristics ◽  
Paradigm Shifting ◽  
The Internet Of Things

In situ conversion of mechanical energy into electricity is a feasible solution to satisfy the increasing power demand of the Internet of Things (IoTs). A triboelectric nanogenerator (TENG) is considered as a potential solution via building self-powered systems. Based on the triboelectrification effect and electrostatic induction, a conventional TENG with pulsed AC output characteristics always needs rectification and energy storage units to obtain a constant DC output to drive electronic devices. Here, we report a next-generation TENG, which realizes constant current (crest factor, ~1) output by coupling the triboelectrification effect and electrostatic breakdown. Meanwhile, a triboelectric charge density of 430 mC m−2 is attained, which is much higher than that of a conventional TENG limited by electrostatic breakdown. The novel DC-TENG is demonstrated to power electronics directly. Our findings not only promote the miniaturization of self-powered systems used in IoTs but also provide a paradigm-shifting technique to harvest mechanical energy.

scholarly journals Nanofibers-Based Piezoelectric Energy Harvester for Self-Powered Wearable Technologies

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2697
Author(s):  
Fatemeh Mokhtari ◽  
Mahnaz Shamshirsaz ◽  
Masoud Latifi ◽  
Javad Foroughi
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Electrospun Nanofibers ◽  
Cost Effective ◽  
Energy Materials ◽  
Current Output ◽  
Wearable Technologies ◽  
Piezoelectric Energy ◽  
New Energy ◽  
Self Powered

The demands for wearable technologies continue to grow and novel approaches for powering these devices are being enabled by the advent of new energy materials and novel manufacturing strategies. In addition, decreasing the energy consumption of portable electronic devices has created a huge demand for the development of cost-effective and environment friendly alternate energy sources. Energy harvesting materials including piezoelectric polymer with its special properties make this demand possible. Herein, we develop a flexible and lightweight nanogenerator package based on polyvinyledene fluoride (PVDF)/LiCl electrospun nanofibers. The piezoelectric performance of the developed nanogenator is investigated to evaluate effect of the thickness of the as-spun mat on the output voltage using a vibration and impact test. It is found that the output voltage increases from 1.3 V to 5 V by adding LiCl as additive into the spinning solution compared with pure PVDF. The prepared PVDF/LiCl nanogenerator is able to generate voltage and current output of 3 V and 0.5 μA with a power density output of 0.3 μW cm−2 at the frequency of 200 Hz. It is found also that the developed nanogenerator can be utilized as a sensor to measure temperature changes from 30 °C to 90 °C under static pressure. The developed electrospun temperature sensor showed sensitivity of 0.16%/°C under 100 Pa pressure and 0.06%/°C under 220 Pa pressure. The obtained results suggested the developed energy harvesting textiles have promising applications for various wearable self-powered electrical devices and systems.

scholarly journals Magnetorheological Elastomer-Based Self-Powered Triboelectric Nanosensor for Monitoring Magnetic Field

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2815
Author(s):  
Dong Wan ◽  
Ningchen Ma ◽  
Taochuang Zhao ◽  
Xiaojing Cui ◽  
Zhaosu Wang ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Fast Response ◽  
Magnetic Sensor ◽  
Triboelectric Nanogenerator ◽  
Magnetorheological Elastomer ◽  
Field Range ◽  
Power Sources ◽  
Electrostatic Induction ◽  
External Power ◽  
Self Powered

The adaptable monitoring of the ubiquitous magnetic field is of great importance not only for scientific research but also for industrial production. However, the current detecting techniques are unwieldly and lack essential mobility owing to the complex configuration and indispensability of the power source. Here, we have constructed a self-powered magnetic sensor based on a subtle triboelectric nanogenerator (TENG) that consists of a magnetorheological elastomer (MRE). This magnetic sensor relies on triboelectrification and electrostatic induction to produce electrical signals in response to the MRE’s deformation induced by the variational magnetic field without using any external power sources. The fabricated magnetic sensor shows a fast response of 80ms and a desirable sensitivity of 31.6 mV/mT in a magnetic field range of 35–60 mT as well as preliminary vectorability enabled by the multichannel layout. Our work provides a new route for monitoring dynamic magnetic fields and paves a way for self-powered electric-magnetic coupled applications.

scholarly journals Triboelectric nanogenerator based on Teflon/vitamin B1 powder for self-powered humidity sensing

2020 ◽  
Vol 11 ◽  
pp. 1394-1401
Author(s):  
Liangyi Zhang ◽  
Huan Li ◽  
Yiyuan Xie ◽  
Jing Guo ◽  
Zhiyuan Zhu
Keyword(s):  
Relative Humidity ◽  
Mechanical Energy ◽  
Vitamin B1 ◽  
Cost Effective ◽  
Electrical Energy ◽  
Open Circuit ◽  
Triboelectric Nanogenerator ◽  
Cost Effective Method ◽  
Self Powered ◽  
Triboelectric Nanogenerators

Recently, there has been growing interest in triboelectric nanogenerators (TENGs) that can effectively convert various forms of mechanical energy input into electrical energy. In the present study, a novel Teflon/vitamin B1 powder based triboelectric nanogenerator (TVB-TENG) is proposed. Paper is utilized as a supporting platform for triboelectrification between a commercial Teflon tape and vitamin B1 powder. The measured open-circuit voltage was approximately 340 V. The TVB-TENG can be applied as a humidity sensor and exhibits a linear and reversible response to the relative humidity of the environment. Moreover, the change in relative humidity is also indicated by the change in luminosity of a set of light-emitting diodes (LEDs) integrated in the TVB-TENG system. The TVB-TENG proposed in this study illustrates a cost-effective method for portable power supply and sensing devices.

scholarly journals Electromagnetic–Triboelectric Hybridized Nanogenerators

Energies ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 6219
Author(s):  
Lin Xu ◽  
Md Al Mahadi Hasan ◽  
Heting Wu ◽  
Ya Yang
Keyword(s):  
Energy Supply ◽  
Electronic Devices ◽  
Wearable Devices ◽  
Triboelectric Nanogenerator ◽  
Electrostatic Induction ◽  
Development Direction ◽  
Great Progress ◽  
Self Powered ◽  
The Difference ◽  
The Many

Since the triboelectric nanogenerator (TENG) was invented, it has received extensive attention from researchers. Among the many pieces of research based on TENG, the research of hybridized generators is progressing rapidly. In recent years, the research and application of the electromagnetic–triboelectric hybridized nanogenerator (EMG-TENG) have made great progress. This review mainly focuses on the latest research development of EMG-TENG and elaborates on the principles, materials, structure, and applications of EMG-TENG. In this paper, the microscopic charge transfer mechanism of TENG is explained by the most primitive friction electrification phenomenon and electrostatic induction phenomenon. The commonly used materials for fabricating TENG and the selection and modification methods of the materials are introduced. According to the difference in structure, EMG-TENG is divided into two categories: vibratory EMG-TENG and rotating EMG-TENG. The summary explains the application of EMG-TENG, including the energy supply and self-powered system of small electronic devices, EMG-TENG as a sensor, and EMG-TENG in wearable devices. Finally, based on summarizing previous studies, the author puts forward new views on the development direction of EMG-TENG.

scholarly journals Development of Flexible Triboelectric Generators Based on Patterned Conductive Textile and PDMS Layers

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1391
Author(s):  
Yeau-Ren Jeng ◽  
Andrew E. Mendy ◽  
Chi-Tse Ko ◽  
Shih-Feng Tseng ◽  
Chii-Rong Yang
Keyword(s):  
Output Voltage ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Patterned Surfaces ◽  
Pdms Layer ◽  
Effective Contact ◽  
Electrostatic Induction ◽  
Self Powered ◽  
Conductive Textile ◽  
Surface Morphologies

A triboelectric generator (TEG) is a simple coupling combined with triboelectrification and electrostatic induction, which can convert mechanical energy into electrical energy and have the potential for self-powered device application. In this study, TEGs are fabricated consisting of a conductive textile (CT) layer (a fabric woven with polyester and stainless steel) and a polydimethylsiloxane (PDMS) layer. The CT friction layer is also used as a conductive electrode and designed with various surface morphologies, including unpatterned, dots, and lines with 1 and 2 cm spacings. Experimental results show that the TEG with an unpatterned CT layer produces an output voltage of 54.6 V and an output current of 5.46 µA. The patterned surfaces increase the effective contact area and friction effect between the CT and PDMS layers and hence enhance the output voltage and current to 94.4 V and 9.44 µA. Compared to the unpatterned CT layer, the pattern use of 1 cm spaced lines, 2 cm spaced lines, and dots improves the output voltage and current by 1.73, 1.68, and 1.24 times, respectively. Moreover, the TEG with 1 cm spaced lines generates a high output power density of 181.9 mW/m2.

Sign in / Sign up

Export Citation Format

Share Document