scholarly journals CBCT-Aided Microscopic and Ultrasonic Treatment for Upper or Middle Thirds Calcified Root Canals

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Ying-Ming Yang ◽  
Bin Guo ◽  
Li-Yang Guo ◽  
Yan Yang ◽  
Xiao Hong ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Great Risk ◽  
Ultrasonic Treatment ◽  
Root Canal ◽  
Three Dimensions ◽  
Cone Beam ◽  
Operating Microscope ◽  
Limited Information ◽  
Root Canals ◽  
Upper Third

Root canal calcification is considered a great challenge during root canal treatment. Although the application of ultrasonic instruments and dental operating microscope (DOM) has advantages, dealing with calcified root canals still suffers a great risk of failure because of limited information about the location, length, and direction of obliteration on periapical radiographs. In this work, a cone-beam computed tomography- (CBCT-) aided method aimed at solving complicated calcified root canals in which conventional approaches could not work was proposed. Thirteen teeth with sixteen calcified canals (12 calcified in the upper third, 4 calcified in the middle third), which cannot be negotiated with conventional methods, were treated with the aid of CBCT. The location of calcification and depth of instrumentation and operating direction were calculated and assessed in three dimensions with ultrasonic instruments under DOM. In all thirteen teeth, canals with upper and middle thirds calcification were treated successfully. Finally, a guideline was proposed to help achieve consistent apical patency in calcified canals.

scholarly journals Endodontic Management of Dilacerated Maxillary Central Incisor fused to a Supernumerary Tooth using Cone Beam Computed Tomography: An Unusual Clinical Presentation

2017 ◽  
Vol 18 (6) ◽  
pp. 522-526 ◽  
Author(s):  
Thilla S Vinothkumar ◽  
Deivanayagam Kandaswamy ◽  
Ganesh Arathi ◽  
Sathishkumar Ramkumar ◽  
Gnanasekaran Felsypremila
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Clinical Presentation ◽  
Cone Beam ◽  
Operating Microscope ◽  
Central Incisor ◽  
Supernumerary Tooth ◽  
Maxillary Central Incisor ◽  
Root Canals

ABSTRACT Aim The purpose of this report is to present a case of endodontic management of a dilacerated maxillary central incisor fused to supernumerary tooth unusually appearing as a labial tubercle using cone beam computed tomography (CBCT) as a diagnostic aid. Background Anterior teeth are commonly encountered with aberrant anatomical variations in the crown, number of roots, and root canals. Fusion is an infrequent developmental abnormality in shape of the tooth caused by the union of two adjacent tooth germs. A complete knowledge of such complex anatomies is mandatory for a successful root canal treatment. It highlights the endodontic and restorative approach in the functional and esthetic rehabilitation of the involved tooth. Case report Three-dimensional imaging using CBCT was used in this case to differentiate single labial canal and palatal C-shaped canal. The endodontic treatment was performed with the aid of dental operating microscope, and the root canals were obturated with a combination of single cone, carrier based, and cold flowable gutta-percha obturation system. The tooth remained asymptomatic without reinfection and symptoms of failure for 18 months. Conclusion Cone beam computed tomography is indispensable in treatment planning for cases where the radiographs cannot reveal useful information regarding the root canal shape. Postobturation CBCT has helped in avoiding further retreatment of the tooth, which otherwise is a challenging task. Clinical significance The use of sophisticated equipment, such as dental operating microscope and CBCT has helped in accurate diagnosis and treatment planning of fused central incisor respectively. How to cite this article Vinothkumar TS, Kandaswamy D, Arathi G, Ramkumar S, Felsypremila G. Endodontic Management of Dilacerated Maxillary Central Incisor fused to a Supernumerary Tooth using Cone Beam Computed Tomography: An Unusual Clinical Presentation. J Contemp Dent Pract 2017;18(6):522-526.

scholarly journals Use of Cone Beam Computed Tomography to Identify the Morphology of Maxillary and Mandibular Premolars in Chennai Population

2019 ◽  
Vol 22 (1) ◽  
pp. Process
Author(s):  
Rajamohan Rajakeerthi ◽  
Malli Suresh Babu Nivedhitha
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Treatment Success ◽  
Cone Beam ◽  
Type I ◽  
Root Canals ◽  
Computed Tomographic ◽  
Root Canal Anatomy ◽  
Computed Tomography Scanning

Objective: The complex root canal anatomy is inherently colonised by microbial flora. Endodontic treatment success is always related to adequate disinfection of the root canal space, which ultimately affects the treatment outcome. A thorough understanding of the external and internal root canal anatomy by using adequately imaging modalities is essential before planning any treatment. The aim of this study was to investigate the number and morphology of the root canals of maxillary and mandibular premolars in Chennai population. Material and Methods: Full-size cone-beam computed tomographic images were randomly collected from 100 patients, resulting in a total of 200 first and 200 second maxillary premolars as well as 200 first and 200 second mandibular premolars. All the eight premolars were analysed in single patients, who underwent cone-beam computed tomography scanning during pre-operative assessment (before implant surgery, orthodontic treatment, diagnosis of dental-alveolar trauma or difficult root canal treatment). Total number of roots and root canals, frequency and correlations between men and women were recorded and statistically analysed by using chi-square tests. The root canal configurations were rated according to the Vertucci’s classification. Results: In the maxillary first premolar group (n = 200), 36.3% had 1 root, 56.7% had 2 roots and 7.0% had 3 roots, with most exhibiting a type IV canal configuration. In the maxillary second premolar group (n = 200), 60% had 1 root, 29.8% had 2 roots and 10.2% had 3 roots, with the majority of single-rooted second premolars exhibiting a type I canal configuration. In the mandibular first premolar group (n = 200), 80.5% had 1 root, 9.8% had 2 roots and 5% had 3 roots. In the mandibular second premolar group (n=200), 90.1% had 1 root, 6.4% had 2 roots and 3.5 % had 3 roots, with most exhibiting a type I canal configuration. No statistical correlation was found between number of roots, gender and tooth position. Conclusion: This cone-beam computed tomographic study confirmed previous anatomical and morphological investigations. Therefore, the possibility of additional root canals should be considered when treating premolars. Keywords: Cone-beam computed tomography; Mandibular; Maxillary; Premolar; Root canal; Morphology.

scholarly journals Comparative evaluation of shaping ability of trunatomy and protaper gold files in curved canals using cone?beam computed tomography: An invitro study

2021 ◽  
Vol 6 (2) ◽  
pp. 101-105
Author(s):  
Kadam Krutika Kiran ◽  
Vagarali Hemant ◽  
Pujar Madhu A ◽  
Tamase Aishwarya S ◽  
Sahana Umesh
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Cone Beam ◽  
Human Teeth ◽  
Root Canals ◽  
Before And After ◽  
Canal Transportation ◽  
Group 2 ◽  
Shaping Ability

This study aimed to compare the canal transportation and canal centering ability in the preparation of curved root canals after instrumentation with TruNatomy (TN) (TN; Dentsply Sirona, Maillefer, Ballaigues, Switzerland) and ProTaper Gold (PG) (PG; Dentsply, Tulsa Dental Specialties, Tulsa, OK, USA) files using cone‑beam computed tomography (CBCT). 30 Single rooted extracted human teeth with root curvature ranging from 20-30° according to Schneider’s method were selected. Teeth with any visible cracks or fractures, calcifications, previous root canal treatments were excluded. The teeth were randomly assigned into two groups i.e. Group 1-TN and Group 2-PG (n = 15 each). The teeth were instrumented according to manufacturer’s guidelines for both the groups. Canals were scanned using a CBCT scanner before and after preparation to evaluate the transportation and centering ratio at 3 mm, 5 mm, and 7 mm from the apex. The data analysis was done using SPSS software and the test used was independent sample t test for comparison between the 2 groups.Data obtained suggested that TN group presented lesser canal transportation at the middle third of the root. The PG group showed better centering abitily at apical third of the root canal when both the groups were compared. TN resulted in less transportation than PG at the middle third, and PG showed better centering ability at the apical third. Overall, both systems safely prepared root canals, causing minimal errors.

scholarly journals Evaluation of the Root and Canal Morphology of Maxillary Permanent Molars and the Incidence of the Second Mesiobuccal Root Canal in Greek Population Using Cone-beam Computed Tomography

2015 ◽  
Vol 9 (1) ◽  
pp. 267-272 ◽  
Author(s):  
Georgia E. Nikoloudaki ◽  
Taxiarchis G. Kontogiannis ◽  
Nikolaos P. Kerezoudis
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Greek Population ◽  
Root Canal Treatment ◽  
Cone Beam ◽  
Second Molar ◽  
Root Canals ◽  
Permanent Molars ◽  
Canal Morphology

Objectives: Cone-Beam Computed Tomography is an alternative imaging technique which has been recently introduced in the field of Oral & Maxillofacial Radiology. It has rapidly gained great popularity among clinicians due to its ability to detect lesions and defects of the orofacial region and provide three-dimensional information about them. In the field of Endodontics, CBCT can be a useful tool to reveal tooth morphology irregularities, additional root canals and vertical root fractures. The objective of this study is to evaluate the root and root canal morphology of the maxillary permanent molars in Greek population using Cone-Beam Computed Tomography.Materials and Methods:273 cone-beam computed tomography (CBCT) images were examined. The number of roots and root canals of the first and second maxillary molars were evaluated. Root canal configuration was classified according to Weine’s classification by two independent examiners and statistical analysis was performed.Results:A total of 812 molars (410 first and 402 second ones) were evaluated. The vast majority of both first and second molars had three roots (89.26% and 85.07%, respectively). Most first molars had four canals, while most second molars had three. In the mesiobuccal roots, one foramen was recorded in 80.91% of all teeth. Other rare morphologic variations were also found, such as fusion of a maxillary second molar with a supernumerary tooth.Conclusion:Within the limitations of this study, it can be concluded that more attention should be given to the detection of additional canals during root canal treatment in maxillary permanent molars. Towards this effort, CBCT can provide the clinician with supplemental information about the different root canal configurations for successful Root Canal Treatment.

scholarly journals Analysis of the internal anatomy of mandibular molars using different cone-beam computed tomography protocols

RSBO ◽  
2020 ◽  
Vol 17 (1) ◽  
pp. 12-20
Author(s):  
Flares Baratto-Filho ◽  
Nathaly Dias Morais ◽  
Kauhanna Vianna de Oliveira ◽  
Flávia Sens Fagundes Tomazinho ◽  
Carla Castiglia Gonzaga ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Anatomical Variations ◽  
Cone Beam ◽  
Type I ◽  
Root Canals ◽  
Mandibular Molars ◽  
Type V ◽  
Level Of Agreement

The aim of this study was to analyze the root canal anatomy variations of permanent mandibular molars using three different cone-beam computed tomography (CBCT) protocols. Material and methods: Thirty-five freshly extracted first and second mandibular molars were collected and subjected to three CBCT protocols: i-CAT Classic (ICC); i-CAT Next Generation (ICN), and PreXion 3D (PXD). Images were evaluated by two previously calibrated and experienced endodontists. The morphological root canal configurations were classified according to Vertucci. Data were analyzed for frequency, and the binomial and Kappa tests were then performed (α = 0.05). Results: ICC and ICN were able to diagnose a higher percentage of anatomical variations in the mesial roots. In this same root, Vertucci’s type V was the most prevalent, and in distal was the type I. In comparisons of CBCT techniques for agreement, significant differences in the mesial root canals were found in the following: ICC versus (vs) ICN; ICC vs PXD; and ICN vs PXD (p <0.001). However, there were no statistical differences in the distal root canals (p >0.05). The level of agreement in mesial roots was poor or absent, while in distal was moderate.

scholarly journals Prevalence of root canal system configurations in the brazilian population analyzed by cone-beam computed tomography – a systematic review

2021 ◽  
Vol 62 (2) ◽  
Author(s):  
Emmanuel Silva ◽  
◽  
Marina Prado ◽  
Marco Duarte ◽  
Marco Versiani ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Systematic Review ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Cone Beam ◽  
Free Text ◽  
Prevalence Studies ◽  
Root Canals ◽  
Mesh Terms ◽  
Wide Range

Objectives: This study performed a systematic review of anatomy prevalence studies using cone-beam computed tomography to comprehend the root and root canal configuration types in Brazilian sub-populations. Methods: This systematic review followed PRISMA’s statements. Four electronic databases (PubMed, ScienceDirect, Lilacs, and Cochrane Collaboration) were accessed using MeSH terms and free-text keywords. The studies were selected according to predefined criteria. References of the collected studies, three peer-reviewed endodontic journals, and two peer-reviewed evidence-based dentistry journals were hand searched. The authors were contacted for additional information, if necessary. Eligible studies were submitted to a scientific merit assessment by two evaluators independently, who reached a final consensus for each study score using the Joanna Briggs Institute Critical Appraisal tool for prevalence studies. Results: A total of 2266 studies were identified. After analysis, 20 full-text articles were accessed for eligibility and 17 were included for qualitative synthesis. A high prevalence of mandibular incisors presenting two root canals was noted (~35.0% – 40.0). Moreover, a high proportion of two-rooted (17.0% – 28.4%) and two root canals (50.1% – 75.0%) morphologies were identified in maxillary second premolars. A wide range and a high percentage of a second mesiobuccal canal were detected for both maxillary first (37.1% – 88.5%) and second molars (21.8% – 83.4%). A second root canal prevalence ranging from 12.4% to 23.4% was observed in the distal root of mandibular first molars. Conclusions: In conclusion, different Brazilian sub-populations may present divergent characteristics regarding the root and root canal configurations. Clinicians should be aware of these variations for proper planning of endodontic treatment.

scholarly journals Root canal morphology and variations in mandibular second molars: an in vivo cone-beam computed tomography analysis

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Francisco Gomez ◽  
Gisbeli Brea ◽  
Jose Francisco Gomez-Sosa
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Anatomical Variation ◽  
Cone Beam ◽  
Canal System ◽  
Root Canals ◽  
Single Root ◽  
Significant Difference ◽  
Root Canal System

Abstract Background The purpose of this study was to determine the anatomical variations of the root canal system of mandibular second molars using cone-beam computed tomography (CBCT). Methods 190 mandibular second molars cone-beam computed tomography images were reviewed. The evaluation was performed by a radiologist with endodontic experience and two endodontists trained with CBCT technology. Tooth position, number of root and root canals, C-shaped root canal system configuration, presence of extra root (radix), and radicular grooves were assessed. Data was statistically analyzed using The Chi-square test (α = 0,05) to determine any significant difference between gender and the total number of root and root canals, and any significant difference between gender and root canal anatomical variation. Results Overall, 85.5% showed two separated roots, 12.1% a single root, 2.6% three roots or radix. 87.7% showed three root canals, 12.1% two root canals, 2.6% four root canals, and 1.6% a single root canal. 10% showed a single foramen, 75.3% two foramina, 13.6% three foramina and 1% showed four foramina.19.5% showed C-shaped anatomical variation, 51.4% in male patients, 48.6% in female patients. According to Fan classification: C1 13.6% in cervical third, C2 10% in the middle third, C3 17.3% in middle third, 15.5% in apical third, and C4 12.7% in the apical third. Root canals number in these samples were 5.4% a single canal, 21.6% two canals, 70.3% three canals, and 2.7% four canals. The root showed 46% with one foramen, 46% two foramina, and 8% three foramina. Radicular grooves 83.3% were found in the lingual area and 16.2% towards the buccal area. Conclusions The most prevalent anatomic presentation of the evaluated sample was a mandibular second molars with two roots, three root canals, and two apical foramina. Their variation was C-shaped root canals and Radix Paramolaris.

scholarly journals Second Root Canal in Mandibular Incisors: an Ex Vivo Cone-Beam Computed Tomography (CBCT) Study

2018 ◽  
Vol 22 (1) ◽  
pp. 38-42
Author(s):  
Maria Elpida Kalaitzoglou ◽  
Eleni Kantilieraki ◽  
Charalampos Beltes ◽  
Christos Angelopoulos ◽  
Panagiotis Beltes
Keyword(s):  
Computed Tomography ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Ex Vivo ◽  
Cone Beam ◽  
Mean Values ◽  
Root Canals ◽  
The Mean ◽  
Type 3 ◽  
Mandibular Incisors

SummaryBackground/Aim: To analyze the internal morphology of mandibular incisors with two root canals using cone-beam computed tomography (CBCT). Material and Methods: 289 (143 central and 146 lateral) extracted intact mandibular incisors were radiographed for detection of a second root canal. The teeth presenting a second root canal were imaged with CBCT and evaluated regarding: root canal type, the distance of the cementoenamel junction (CEJ) to the bifurcation of the canals and the distance of the canal fusion to the apical foramen (in teeth in which canals rejoined). Results: Out of 143 central and 146 lateral mandibular incisors, 41 (28.7%) and 44 (30.1%) teeth respectively showed a second root canal. Types II, III, V and an additional type to Vertucci’s classification were identified. Type III was the most prevalent and presented in 30 (73.2%) central and 34 (77.3%) lateral mandibular incisors with two root canals. The mean values of the distance of the CEJ to the canal bifurcation were 4.2 mm and 4.0 mm for central and lateral mandibular incisors respectively. The mean values of the distance of the canal fusion to the apical foramen 5.5 mm and 5.1 mm for central and lateral mandibular incisors respectively. Conclusions: Mandibular incisors with two root canals mainly present with Vertucci’s Type 3 canal configuration. The canal bifurcation was identified mostly at the coronal and middle thirds of the root, while the canal fusion occurred in the middle third of the root.

scholarly journals Assessment of Root and Root Canal Morphology of Human Primary Molars using CBCT

2020 ◽  
Vol 47 (1) ◽  
pp. 25-35
Author(s):  
Yoomin Choi ◽  
Seonmi Kim ◽  
Namki Choi
Keyword(s):  
Computed Tomography ◽  
Root Canal ◽  
Morphological Characteristics ◽  
Cone Beam ◽  
Primary Molars ◽  
Primary Molar ◽  
Root Canals ◽  
Molar Teeth ◽  
Root Canal Morphology ◽  
Canal Morphology

The purpose of this study is to evaluate the morphological characteristics of the roots and roots canals of primary molar teeth using Cone-Beam Computed Tomography (CBCT).<br/>A total of 68 CBCT images of children aged 4 - 5 years was used for this study. A total of 160 molar teeth were analyzed. Various parameters such as the number of roots and canals, length of root and root canal, and the angulation and shape of the roots were analyzed.<br/>All maxillary primary molars had 3 roots. The presence of 2 root canals in 1 root was only observed in the mesiobuccal root of maxillary primary second molars. Most mandibular primary molars had 2 roots, and most mesial roots had 2 root canals.<br/>Concerning the length of the roots, the palatal root of the maxillary primary molar was found to be longest whereas the distobuccal root was shortest. In mandibular primary molars, the mesial root was longer than the distal root. In maxillary primary molars, the palatal root had the greatest angulation whereas the distal root has the greatest in mandibular molars. The root and root canals of maxillary primary molars were more curved in shape whereas mandibular primary molars were straight.

MANAGEMENT OF C-SHAPED CANAL IN MANDIBULAR SECOND MOLAR: A CASE REPORT

2021 ◽  
pp. 66-68
Author(s):  
Shivangi Shreya ◽  
C.K. Wang
Keyword(s):  
Computed Tomography ◽  
Case Report ◽  
Cone Beam Computed Tomography ◽  
Root Canal ◽  
Unusual Case ◽  
Cone Beam ◽  
Second Molar ◽  
Root Canals ◽  
Canal Systems ◽  
Mandibular Second Molar

Variations of root canal systems need not always be in the form of extra canals. Clinicians should be aware that there is a possibility of existence of fewer numbers of roots and root canals than normal, which presents varied canal anatomy and poses a challenge to the clinician's expertise. This case report deals with the management of an unusual case of C-shaped canal in mandibular second molar. Cone-beam computed tomography (CBCT) was employed to conrm the extension of the unusual anatomy. 3-D Obturation done with the help of thermoplastic obturation unit.

Sign in / Sign up

Export Citation Format

Share Document