scholarly journals Effect of Growth Temperature and Time on Morphology and Gas Sensitivity of Cu2O/Cu Microstructures

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Ling Wu ◽  
Lun Zhang ◽  
Zhipeng Xun ◽  
Guili Yu ◽  
Liwei Shi
Keyword(s):  
Electron Microscopy ◽  
Gas Sensors ◽  
Gas Sensing ◽  
Spherical Particles ◽  
X Ray Diffraction ◽  
Gas Sensitivity ◽  
X Ray ◽  
Transmission Electron ◽  
Wide Range ◽  
Gas Response

A facile hydrothermal synthesis with CuSO4as the copper source was used to prepare micro/nano-Cu2O. The obtained samples have been characterized by X-ray diffraction, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). With increasing the reaction temperature and time, the final products were successively Cu2O octahedron microcrystals, Cu2O/Cu composite particles, and a wide range of Cu spherical particles. The gas sensitivity of products towards ethanol and acetone gases was studied. The results showed that sensors prepared with Cu2O/Cu composites synthesized at 65°C for 15 min exhibited optimal gas sensitivity. The gas sensing mechanism and the effect of Cu in the enhanced gas response were also elaborated. The excellent gas sensitivity indicates that Cu2O/Cu composites have potential application as gas sensors.

Porous LaFeO3 with High Response to Acetone Synthesized from Biotemplates

2013 ◽  
Vol 575-576 ◽  
pp. 20-23 ◽  
Author(s):  
Yu Zhen Ma ◽  
Peng Song ◽  
Qi Wang
Keyword(s):  
Electron Microscopy ◽  
Gas Sensing ◽  
Perovskite Phase ◽  
Spherical Particles ◽  
Orthorhombic Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Xrd Patterns ◽  
Microscopy Characterization

Biomorphic porous LaFeO3 samples were prepared using aspen leaves as biotemplates. The structural and microscopy characterization has been carried out with X-ray diffraction, scanning electron microscopy and transmission electron microscopy. XRD patterns confirm thatLaFeO3 shows perovskite phase with orthorhombic structure. The results of SEM and TEM revealed that the the obtained LaFeO3 with hollow and porous structure. And the porous LaFeO3 is composed of spherical particles with the size of 50-80 nm The gas sensing performance of as-prepared LaFeO3 nanocrystlas was investigated. It is found that porous LaFeO3 calcined at 700°C exhibit good sensitivity to acetone with rapid response.

scholarly journals Synthesis and acetone sensing properties of ZnFe2O4/rGO gas sensors

2019 ◽  
Vol 10 ◽  
pp. 2516-2526 ◽  
Author(s):  
Kaidi Wu ◽  
Yifan Luo ◽  
Ying Li ◽  
Chao Zhang
Keyword(s):  
Electron Microscopy ◽  
Gas Sensors ◽  
Gas Sensing ◽  
Hollow Spheres ◽  
High Sensitivity ◽  
Inert Atmosphere ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene

Hollow spheres of pure ZnFe2O4 and of composites of ZnFe2O4 and reduced graphene oxide (rGO) with different rGO content were prepared via a simple solvothermal method followed by a high-temperature annealing process in an inert atmosphere. The X-ray diffraction analysis confirmed that the introduction of rGO had no effect on the spinel structure of ZnFe2O4. In addition, the results of field-emission scanning electron microscopy and (high-resolution) transmission electron microscopy indicated that the synthesized samples had the structure of hollow spheres distributed uniformly onto rGO nanosheets. The diameters of the spheres were determined as about 600–1000 nm. The gas sensing test revealed that the introduction of rGO improved the performance of the sensing of acetone to low concentration, and the ZnFe2O4/rGO composite gas sensor containing 0.5 wt % of rGO exhibited a high sensitivity in sensing test using 0.8–100 ppm acetone at 200 °C. The response of the 0.5 wt % ZnFe2O4/rGO sensor to 0.8 ppm acetone was 1.50, and its response to 10 ppm acetone was 8.18, which is around 2.6 times more pronounced than the response of pure ZnFe2O4 (10 ppm, 3.20). Moreover, the sensor showed a wide linear range and good selectivity.

A Novel Tungsten Trioxide Based Gas Sensor for Indoor Formaldehyde Detection

2021 ◽  
Vol 16 (3) ◽  
pp. 363-367
Author(s):  
Gaoqi Zhang ◽  
Fan Zhang ◽  
Kaifang Wang ◽  
Tao Tian ◽  
Shanyu Liu ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Gas Sensor ◽  
Indoor Air ◽  
Gas Sensing ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sensing Material ◽  
Transmission Electron ◽  
Gas Sensing Properties ◽  
Gas Response

Accurate and real-time detection of formaldehyde (HCHO) in indoor air is urgently needed for human health. In this work, a ceramic material (WO3·H2O) with unique structure was successfully prepared using an efficient hydrothermal method. The crystallinity, morphology and microstructure of the as-prepared sensing material were analyzed by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) as well as transmission electron microscope (TEM). The characterization results suggest that the as-prepared sample is composed of square-like nanoplates with uneven surface. Formaldehyde vapor is utilized as the target gas to investigate gas sensing properties of the synthesized novel nanoplates. The testing results indicate that the as-fabricated gas sensor exhibit high gas response and excellent repeatability to HCHO gas. The response value (Ra/Rg) is 24.5 towards 70 ppm HCHO gas at 350 °C. Besides, the gas sensing mechanism was described.

Synthesis of Fe2O3/CNTs for the Fast Removal of Tetracycline from Aqueous Solutions

2014 ◽  
Vol 915-916 ◽  
pp. 933-941 ◽  
Author(s):  
Zhong Jie Zhang ◽  
Chang Yu Lu ◽  
Wei Huang ◽  
Wei Sheng Guan ◽  
Yue Xin Peng
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Magnetic Measurements ◽  
Ferrite Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Wide Range ◽  
Fast Removal ◽  
Scanning Electron

The effective remove to tetracycline still remains a big challenge for scientists. In this work, we used a new method for preparing functional magnetic CNTS with ferrite nanoparticles. A wide range of techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and magnetic measurements were applied to characterize the obtained Fe2O3/CNTs. Moreover, we have also studied the properties of adsorbent to tetracycline. In addition, we have found that the Fe2O3/CNTs are better reusable adsorbent than other traditional adsorbents by magnetic separation recycling method.

scholarly journals Highly sensitive and selective sensing of H2S gas using precipitation and impregnation-made CuO/SnO2 thick films

2021 ◽  
Author(s):  
Pimpan Leangtanom ◽  
Anurat Wisitsoraat ◽  
Kata Jaruwongrangsee ◽  
Narong Chanlek ◽  
Adisorn Tuantranont ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Fast Response ◽  
Potential Candidate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Content ◽  
Transmission Electron ◽  
Highly Sensitive

Abstract In this work, CuO-loaded tetragonal SnO2 nanoparticles (CuO/SnO2 NPs) were synthesized using precipitation/impregnation methods with varying Cu contents of 0–25 wt% and characterized for H2S detection. The material phase, morphology, chemical composition and specific surface area of NPs were evaluated using X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller analysis. From gas-sensing data, the H2S responses of SnO2 NPs were greatly enhanced by CuO loading particularly at the optimal Cu content of 20 wt%. The 20 wt%CuO/SnO2 sensor showed an excellent response of 1.36⋅105 towards 10 ppm H2S and high H2S selectivity against H2, SO2, CH4 and C2H2 at a low optimum working temperature of 200°C. In addition, the sensor provided fast response and a low detection limit of less than 0.15 ppm. The CuO-SnO2 sensor could therefore be a potential candidate for H2S detection in environmental applications.

Nanostructured CaWO4, CaWO4:Eu3+ and CaWO4:Tb3+ Particles: Sonochemical Synthesis and Luminescent Properties

2008 ◽  
Vol 8 (3) ◽  
pp. 1183-1190 ◽  
Author(s):  
Chunxia Li ◽  
Cuikun Lin ◽  
Xiaoming Liu ◽  
Jun Lin
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Field Emission ◽  
Spherical Particles ◽  
X Ray Diffraction ◽  
Blue Emission Band ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Nanostructured CaWO4, CaWO4:Eu3+, and CaWO4:Tb3+ phosphor particles were synthesized via a facile sonochemical route. X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, photoluminescence, low voltage cathodoluminescence spectra, and photoluminescence lifetimes were used to characterize the as-obtained samples. The X-ray diffraction results indicate that the samples are well crystallized with the scheelite structure of CaWO4. The transmission electron microscopy and field emission scanning electron microscopy images illustrate that the powders consist of spherical particles with sizes from 120 to 160 nm, which are the aggregates of even smaller nanoparticles ranging from 10 to 20 nm. Under UV light or electron beam excitation, the CaWO4 powder exhibited a blue emission band with a maximum at 430 nm originating from the WO2−4 groups, while the CaWO4:Eu3+ powder showed red emission dominated by 613 nm ascribed to the 5D0 → 7F2 of Eu3+, and the CaWO4:Tb3+ powders showed emission at 544 nm, ascribed to the 5D4 → 7F5 transition of Tb3+. The PL excitation and emission spectra suggest that the energy is transferred from WO2−4 to Eu3+CaWO4:Eu3+ and to Tb3+ in CaWO4:Tb3+. Moreover, the energy transfer from WO2−4 to Tb3+ in CaWO4:Tb3+ is more efficient than that from WO2−4 to Eu3+ in CaWO4:Eu3+. This novel and efficient pathway could open new opportunities for further investigating the novel properties of tungstate materials.

Synthesis of Ultra-Fine Conducting Polyaniline Micro/Nanotubes Using Fiber Template and Their NH3 Gas Sensitivity

2007 ◽  
Vol 7 (12) ◽  
pp. 4515-4521 ◽  
Author(s):  
Bo Xue ◽  
Shaoyan Qi ◽  
Jian Gong ◽  
Yu Gao ◽  
Shuang Yao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Wide Angle ◽  
X Ray Diffraction ◽  
Gas Sensitivity ◽  
X Ray ◽  
Transmission Electron ◽  
Conducting Polyaniline ◽  
Inner Diameter ◽  
Scanning Electron

We have recently fabricated ultra-fine conducting polyaniline (PANI) tubes with high gas sensitivity. This route includes two steps. Firstly, aniline polymerizes on the surface of a suitable fiber template prepared by electrospun nitrocellulose (NC). Then, the NC fiber template is dissolved and the ultra-fine PANI tubes are obtained. The structure of the conducting PANI tubes is characterized by IR spectrum and wide-angle X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results indicate that the PANI shows the shape of ultra-fine tubes with average inner diameter of 250–350 nm. The wall thickness of the ultra-fine PANI tubes increases with increasing the content of oxidant. The conductivity of the doped PANI tubes is about 6 9 × 10−2 S. The results of gas sensitivity of the ultra-fine PANI tubes indicate that the PANI tubes can act as "electronic nose" to detect toxic NH3 gas below 20 ppm.

A Metastable Ion (III) Oxide Phase (ε-Fe2O3): Preparation and Gas Sensing Properties

2016 ◽  
Vol 697 ◽  
pp. 737-740 ◽  
Author(s):  
Ming Jing Wang ◽  
Hui Ming Ji ◽  
Ya Lu Chen ◽  
Qian Qian Jia
Keyword(s):  
Electron Microscopy ◽  
Gas Sensing ◽  
Sol Gel ◽  
Oxide Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Gas Sensing Properties ◽  
Addition Amount ◽  
Scanning Electron

ε-Fe2O3 is a rare and metastable iron (III) oxide phase. ε-Fe2O3/SiO2 composites were prepared by combining the reverse-micelle and sol-gel methods. An appropriate amount of Ba2+ was needed in this system to promote the formation of ε-Fe2O3 nanorods in SiO2. The size of nanorods varied with different Ba2+ addition amount and sintering procedure. Then pure ε-Fe2O3 nanorods were obtained after stripping SiO2 by etching due to NaOH aqueous solution. The as-synthesized ε-Fe2O3 nanorods were discussed using X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscopy (TEM). Interestingly, metastable ε-Fe2O3 nanorods showed a promising performance for the response for ethanol, compared with the stable phases of α-Fe2O3 and γ-Fe2O3. It indicates that nanostructure ε-Fe2O3 (including ε-Fe2O3 nanorods) could be a valuable material for the fabrication of advanced sensing devices.

Synthesis Of Highly Ordered Macroporous Minerals: Extension of the Synthetic Method to Other Metal Oxides and Organic-Inorganic Composites

1998 ◽  
Vol 549 ◽  
Author(s):  
C.F. Blanford ◽  
T.N. Do ◽  
B.T. Holland ◽  
A. Stein
Keyword(s):  
Electron Microscopy ◽  
Metal Oxides ◽  
Three Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Wide Range ◽  
Ordered Macroporous ◽  
Lower Temperature

AbstractThe facile synthesis of three-dimensional macroporous arrays of titania, zirconia and alumina was recently reported [1]. The synthesis of these materials has now been extended to the oxides of iron, tungsten, and antimony, as well as a mixed yttrium-zirconium system and organically modi- fied silicates. These materials were characterized by Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), X-ray energy dispersive spectrometry (EDS), and powder X-ray diffraction (XRD). Ordered structures of iron, tungsten, and antimony were formed from alkoxide precursors as in the originally reported synthesis, but the template was removed at a lower temperature. Samples of vinyl- and 2-cyanoethyl-modified silicates were formed from a mixture of organotrialkoxysilane and tetraalkoxysilane precursors; the polystyrene template was removed by extraction with a THF/acetone mixture. These results show the ease of extending the original syn- thesis to a wide range of systems. Also, the ability to form homogenous mixed-metal oxides will be important for tailoring the dielectric and photonic properties of these materials.

scholarly journals Relationship between Crystal Shape, Photoluminescence, and Local Structure inSrTiO3Synthesized by Microwave-Assisted Hydrothermal Method

2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Luís F. da Silva ◽  
Waldir Avansi ◽  
Mário L. Moreira ◽  
Alexandre Mesquita ◽  
Lauro J. Q. Maia ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Hydrothermal Method ◽  
Spherical Particles ◽  
Lower Amount ◽  
X Ray Diffraction ◽  
Edge Structure ◽  
X Ray ◽  
Microwave Assisted ◽  
Transmission Electron ◽  
X Ray Absorption

This paper describes the effect of using different titanium precursors on the synthesis and physical properties of SrTiO3powders obtained by microwave-assisted hydrothermal method. X-ray diffraction measurements, X-ray absorption near-edge structure (XANES) spectroscopy, field emission scanning electron microscopy (FE-SEM), and high-resolution transmission electron microscopy (HRTEM) were carried out to investigate the structural and optical properties of the SrTiO3spherical and cubelike-shaped particles. The appropriate choice of the titanium precursor allowed the control of morphological and photoluminescence (PL) properties of SrTiO3compound. The PL emission was more intense in SrTiO3samples composed of spherelike particles. This behavior was attributed to the existence of a lower amount of defects due to the uniformity of the spherical particles.

Sign in / Sign up

Export Citation Format

Share Document