scholarly journals Development and Characterization of Novel Floating-Mucoadhesive Tablets Bearing Venlafaxine Hydrochloride

Scientifica ◽  
2016 ◽  
Vol 2016 ◽  
pp. 1-13 ◽  
Author(s):  
Raghvendra Misra ◽  
Peeyush Bhardwaj
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Methyl Cellulose ◽  
Simulated Gastric Fluid ◽  
Drug Bioavailability ◽  
Hydroxypropyl Methyl Cellulose ◽  
Detachment Force ◽  
Gastric Residence Time ◽  
Venlafaxine Hydrochloride

The present investigation is concerned about the development of floating bioadhesive drug delivery system of venlafaxine hydrochloride which after oral administration exhibits a unique combination of floating and bioadhesion to prolong gastric residence time and increase drug bioavailability within the stomach. The floating bioadhesive tablets were prepared by the wet granulation method using different ratios of hydroxypropyl methyl cellulose (HPMC K4MCR) and Carbopol 934PNF as polymers. Sodium bicarbonate (NaHCO3) and citric acid were used as gas (CO2) generating agents. Tablets were characterized for floating properties,in vitrodrug release, detachment force, and swelling index. The concentration of hydroxypropyl methyl cellulose and Carbopol 934PNF significantly affects thein vitrodrug release, floating properties, detachment force, and swelling properties of the tablets. The optimized formulation showed the floating lag time72±2.49seconds and duration of floating24.50±0.74 hr. Thein vitrorelease studies and floating behavior were studied in simulated gastric fluid (SGF) at pH 1.2. Different drug release kinetics models were also applied. Thein vitrodrug release from tablets was sufficiently sustained (more than 18 hr) and the Fickian transports of the drug from the tablets were confirmed. The radiological evidence suggests that the tablets remained buoyant and altered position in the stomach of albino rabbit and mean gastric residence time was prolonged (more than > 6 hr).

scholarly journals Development and Characterization of Novel Site Specific Hollow Floating Microspheres Bearing 5-Fu for Stomach Targeting

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Peeyush Bhardwaj ◽  
Deepti Chaurasia ◽  
Ranjit Singh ◽  
Anoop Swarup
Keyword(s):  
Drug Release ◽  
Entrapment Efficiency ◽  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
Drug Bioavailability ◽  
Gastric Residence Time ◽  
Evaporation Technique ◽  
Multiple Unit

Multiple-unit-type oral floating hollow microspheres of 5-fluorouracil (5-Fu) were developed using modified solvent evaporation technique to prolong gastric residence time, to target stomach cancer, and to increase drug bioavailability. The prepared microspheres were characterized for micromeritic properties, floating behavior, entrapment efficiency, and scanning electron microscopy (SEM). Thein vitrodrug release and floating behavior were studied in simulated gastric fluid (SGF) at pH 1.2. The yield of microspheres was obtained up to84.46±6.47%. Microspheres showed passable flow properties. Based on optical microscopy, particle size was found to be ranging from158.65±12.02to198.67±17.45 μm. SEM confirmed spherical size, perforated smooth surface, and a hollow cavity inside the microspheres. Different kinetic models for drug release were also applied on selected batches.

Development and In Vitro – In Vivo Evaluation of Gastro-retentive Floating Tablets Containing Repaglinide

2018 ◽  
Vol 11 (2) ◽  
pp. 4026-4036
Author(s):  
Poornima P ◽  
Abbulu K ◽  
Mukkanti K
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Chemical Properties ◽  
Matrix Tablets ◽  
In Vitro Dissolution ◽  
Drug Bioavailability ◽  
In Vivo Evaluation ◽  
Gastric Residence Time

The present investigation concerns the development of the repaglinide floating matrix tablets, which after oral administration are designed to prolong the gastric residence time, increase the drug bioavailability and diminish the side effects of irritating drugs. FTIR studies revealed that there is no interaction between the drug and polymers used for the formulation. Among all the formulations F21 containing HPMC K1500 PH PRM, Polyox WSR-303 and Sodium bicarbonate, as gas generating agent was selected as optimized formulation based on physico chemical properties, floating lag time (36 sec) and total floating time (>24 h). From in vitro dissolution studies, the optimized formulation F21 showed drug release of 98.92±5.19% within 24h whereas 95.09±5.01% of the drug was released from the marketed product within 1h. The major mechanism of drug release follows zero order kinetics and non-Fickian transport by coupled diffusion and erosion. In vivo experiments supported the expectations in prolonging the gastric residence time in the fasted state in beagle dogs. The mean gastric residence time for the tested tablets was 270 min±60. This result is encouraging, because a longer gastric residence time is an important condition for higher bioavailability of the drugs included in the prolonged or controlled release dosage forms.

scholarly journals DESIGN AND EVALUATION OF INTRAGASTRIC BUOYANT TABLETS OF VENLAFAXINE HYDROCHLORIDE

2017 ◽  
Vol 10 (5) ◽  
pp. 166
Author(s):  
Parasuram Rajam Radhika ◽  
Nishala N ◽  
Kiruthika M ◽  
Sree Iswarya S
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Xanthan Gum ◽  
Hydroxypropyl Methylcellulose ◽  
Methyl Cellulose ◽  
In Vitro Drug Release ◽  
Weight Variation ◽  
Floating Drug Delivery ◽  
Venlafaxine Hydrochloride

Objective: The present study was undertaken to prolong the release of orally administered drug. The aim is to formulate, develop, and evaluate theintragastric buoyant tablets of venlafaxine hydrochloride, which releases the drug in a sustained manner over a period of 12 hrs. Different formulationswere formulated using the polymers Carbopol 934 P, xanthan gum, hydroxypropyl methylcellulose (HPMC K100M) with varying concentration ofdrug: Polymer ratio of 1:1, 1:1.5, 1:2, in which sodium bicarbonate acts as gas generating agent, and microcrystalline cellulose as a diluent.Methods: The tablets were prepared by direct compression and evaluated for tablet thickness, weight variation, tablet hardness, friability, in vitrobuoyancy test, in vitro drug release and Fourier transform infrared spectroscopy. Formulations were evaluated by floating time, floating lag time and in vitro drug release. Dissolution profiles were subjected for various kinetic treatments to analyze the release pattern of drug.Results: It was found that drug release depends on swelling, erosion, and diffusion, thus following the non-Fickian/anomalous type of diffusion.Formulation F8 was considered as an optimized formulation for gastro retentive floating tablet of venlafaxine hydrochloride. The optimizedformulation showed sustained drug release and remained buoyant on the surface of the medium for more than 12 hrs. As the concentration of HPMCK100M increases in the formulation the drug release rate was found to be decreased. The optimized formulation was subjected for the stability studiesand was found to be stable as no significant change was observed in various evaluated parameters of the formulation.Conclusion: It can be concluded that floating drug delivery system of venlafaxine hydrochloride can be successfully formulated as an approach toincrease gastric residence time, thereby improving its bioavailability.Keywords: Venlafaxine hydrochloride, Intragastric buoyant, Floating drug delivery systems, Hydroxypropyl methyl cellulose K100M, Carbopol 934 P,Xanthan gum.

scholarly journals Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride

2011 ◽  
Vol 61 (2) ◽  
pp. 217-226 ◽  
Author(s):  
Komuravelly Someshwar ◽  
Kalyani Chithaluru ◽  
Tadikonda Ramarao ◽  
K. Kumar
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
Hydroxypropyl Methylcellulose ◽  
Matrix Tablets ◽  
Physical Parameters ◽  
Floating Tablets ◽  
Gastric Residence Time

Formulation and evaluation of effervescent floating tablets of tizanidine hydrochloride Tizanidine hydrochloride is an orally administered prokinetic agent that facilitates or restores motility through-out the length of the gastrointestinal tract. The objective of the present investigation was to develop effervescent floating matrix tablets of tizanidine hydrochloride for prolongation of gastric residence time in order to overcome its low bioavailability (34-40 %) and short biological half life (4.2 h). Tablets were prepared by the direct compression method, using different viscosity grades of hydroxypropyl methylcellulose (HPMC K4M, K15M and K100M). Tablets were evaluated for various physical parameters and floating properties. Further, tablets were studied for in vitro drug release characteristics in 12 hours. Drug release from effervescent floating matrix tablets was sustained over 12 h with buoyant properties. DSC study revealed that there is no drug excipient interaction. Based on the release kinetics, all formulations best fitted the Higuchi, first-order model and non-Fickian as the mechanism of drug release. Optimized formulation (F9) was selected based on the similarity factor (f2) (74.2), dissolution efficiency at 2, 6 and 8 h, and t50 (5.4 h) and was used in radiographic studies by incorporating BaSO4. In vivo X-ray studies in human volunteers showed that the mean gastric residence time was 6.2 ± 0.2 h.

Floating Microsphere of Curcumin as Targeted Gastro-retentive Drug Delivery System

2021 ◽  
pp. 5202-5206
Author(s):  
Anupam K Sachan ◽  
Saurabh Singh ◽  
Kiran Kumari ◽  
Pratibha Devi
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Sustained Release ◽  
Drug Delivery System ◽  
Delivery System ◽  
Entrapment Efficiency ◽  
Synthetic Polymers ◽  
Drug Bioavailability ◽  
Gastric Residence Time

Microspheres carrier system made from natural or synthetic polymers used in sustained release drug delivery system. The present study involves formulation and evaluation of floating microspheres of Curcumin for improving the drug bioavailability by prolongation gastric residence time. Curcumin, natural hypoglycemic agent is a lipophilic drug, absorbed poorly from the stomach, quickly eliminated and having short half-life so suitable to formulate floating drug delivery system for sustained release. Floating microspheres of curcumin were formulated by solvent evaporation technique using ethanol and dichloromethane (1:1) as organic solvent and incorporating various synthetic polymers as coating polymer, sustain release polymers and floating agent. The final formulation were evaluated various parameters such as compatibility studies, micrometric properties, In-vitro drug release and % buoyancy. FTIR studies showed that there were no interaction between drug and excipients. The surface morphology studies by SEM confirmed their spherical and smooth surface. The mean particles size were found to be 416-618µm, practical yield of microspheres was in the range of 60.21±0.052% - 80.87±0.043%, drug entrapment efficiency 47.4±0.065% - 77.9±0.036% and % buoyancy 62,24±0.161% - 88.63±0.413%. Result show that entraptmency increased as polymer (Eudragit RS100) conc. Increased. The drug release after 12 hrs. was 72.13% - 87.13% and it decrease as a polymer (HPMC, EC) concentration was decrease.

scholarly journals Crushed Tablets: Does the Administration of Food Vehicles and Thickened Fluids to Aid Medication Swallowing Alter Drug Release?

2014 ◽  
Vol 17 (2) ◽  
pp. 207 ◽  
Author(s):  
Yady Juliana Manrique-Torres ◽  
Danielle J Lee ◽  
Faiza Islam ◽  
Lisa M Nissen ◽  
Julie A.Y. Cichero ◽  
...  
Keyword(s):  
Drug Release ◽  
Orange Juice ◽  
Immediate Release ◽  
Drug Dissolution ◽  
In Vitro Dissolution ◽  
Simulated Gastric Fluid ◽  
Drug Bioavailability ◽  
Thickening Agents

Purpose. To evaluate the influence of co-administered vehicles on in vitro dissolution in simulated gastric fluid of crushed immediate release tablets as an indicator for potential drug bioavailability compromise. Methods. Release and dissolution of crushed amlodipine, atenolol, carbamazepine and warfarin tablets were tested with six foods and drinks that are frequently used in the clinical setting as mixers for crushed medications (water, orange juice, honey, yoghurt, strawberry jam and water thickened with Easythick powder) in comparison to whole tablets. Five commercial thickening agents (Easythick Advanced, Janbak F, Karicare, Nutilis, Viscaid) at three thickness levels were tested for their effect on the dissolution of crushed atenolol tablets. Results. Atenolol dissolution was unaffected by mixing crushed tablets with thin fluids or food mixers in comparison to whole tablets or crushed tablets in water, but amlodipine was delayed by mixing with jam. Mixing crushed warfarin and carbamazepine tablets with honey, jam or yoghurt caused them to resemble the slow dissolution of whole tablets rather than the faster dissolution of crushed tablets in water or orange juice. Crushing and mixing any of the four medications with thickened water caused a significant delay in dissolution. When tested with atenolol, all types of thickening agents at the greatest thickness significantly restricted dissolution, and products that are primarily based on xanthan gum also delayed dissolution at the intermediate thickness level. Conclusions. Dissolution testing, while simplistic, is a widely used and accepted method for comparing drug release from different formulations as an indicator for in vivo bioavailability. Thickened fluids have the potential to retard drug dissolution when used at the thickest levels. These findings highlight potential clinical implications of the addition of these agents to medications for the purpose of dose delivery and indicate that further investigation of thickened fluids and their potential to influence therapeutic outcomes is warranted. This article is open to POST-PUBLICATION REVIEW. Registered readers (see “For Readers”) may comment by clicking on ABSTRACT on the issue’s contents page.

scholarly journals Characterization of bilayered matrix-type mucoadhesive buccal films containing tizanidine hydrochloride and piroxicam

2021 ◽  
Vol 20 (11) ◽  
pp. 2241-2248
Author(s):  
M. Yasmin Begum ◽  
Ali Alqahtani
Keyword(s):  
Drug Release ◽  
Patient Compliance ◽  
Residence Time ◽  
Ex Vivo ◽  
Drug Bioavailability ◽  
In Vitro Drug Release ◽  
Surface Ph ◽  
Folding Endurance ◽  
Buccal Films

Purpose: To formulate and characterize tizanidine hydrochloride (TZN) and piroxicam (PRX)-loaded bilayer mucoadhesive buccal films with an intention to improve the bioavailability and patient compliance in pain management.Methods: Bilayer buccal films were prepared by solvent evaporation technique using hydroxypropyl methylcellulose (HPMC) 15cps and polyvinylpyrrolidone (PVP K30 as immediate release (IR) layer forming polymers and HPMC K15 M, PVP K 90 along with various muco adhesive polymers (Carbopol P934, sodium alginate, etc), as sustained release (SR) layer forming polymers. The prepared films werecharacterized for thickness, weight variation, folding endurance, surface pH, swelling index,mucoadhesive strength, in vitro residence time, in vitro drug release, ex vivo permeation and drug release kinetics.Results: The prepared films were of largely uniform thickness, weight and drug content. Moisture loss (%) and folding endurance were satisfactory. Surface pH was compatible with salivary fluid. Disintegration time was 85 s for F1 and 115 s for F2 of IR films. In vitro dissolution studies showed 99.12 ± 1.2 % (F1) and 90.36 ± 1.8 % (F2) were released in 45 min. Based on the above results, F1 was chosen as the optimum formulation to be combined with SR layer of TZN. Amongst the SR layers of TZN in vitro drug release. The findings show that of F2 was 98.38 ± 0.82 % and correlated with ex vivo release. Drug release followed zero order release kinetics and mechanism of drug release was non-Fickian type diffusion. In vitro residence time was greater than 5 h.Conclusion: The findings show that the bilayer buccal films demonstrate the dual impact of deliveringPRX instantly from the IR layer, with good controlled release and permeation of TZN from the SR layer, thus providing enhanced therapeutic efficacy, drug bioavailability and patient compliance.

Development of Multiple-Unit Floating Drug Delivery System of Clarithromycin: Formulation, in vitro Dissolution by Modified Dissolution Apparatus, in vivo Radiographic Studies in Human Volunteers

Drug Research ◽  
2017 ◽  
Vol 67 (07) ◽  
pp. 412-418 ◽  
Author(s):  
Arun Reddy ◽  
Narendar Reddy
Keyword(s):  
Drug Release ◽  
Residence Time ◽  
Release Kinetics ◽  
In Vitro Dissolution ◽  
Physical Parameters ◽  
Gastric Residence Time ◽  
Human Volunteers ◽  
Multiple Unit

AbstractClarithromycin (CM), a broad spectrum macrolide antibiotic used to eradicate H. pylori in peptic ulcer. Clarithromycin (CM) is well absorbed from the gastrointestinal tract, but has a bioavailability of 50% due to rapid biodegradation. The aim of this investigation was to increase the gastric residence time, and to control the drug release of clarithromycin by formulating into multiple unit floating mini-tablets. Floating tablets were prepared by using direct compression method with HPMC K4M and Polyox WSR 1105 as release retarded polymers and sodium bicarbonate as gas generating agent. The prepared mini-tablets were evaluated for thickness, weight variation, friability, hardness, drug content, in vitro buoyancy, swelling studies, in vitro dissolution studies by using modified Rossett-Rice test and in vivo radiographic studies in healthy human volunteers in fasting conditions. DSC analysis revealed that no interaction between drug and excipients. All the physical parameters of the tablets were within the acceptable limits. The optimized formulation (F6) had showed controlled drug release of 99.16±3.22% in 12 h, by zero-order release kinetics, along with floating lag time of 9.5±1.28 s and total floating time of 12±0.14 h. X-ray imaging studies revealed that in vivo gastric residence time of clarithromycin floating mini-tablet in the stomach was about 3.5 h. The results demonstrated that the developed floating mini-tablets of clarithromycin caused significant enhancement in gastric retention time along with sustained effect and increased oral bioavailability.

scholarly journals A PROMISING APPROACH TO PROVIDE APPROPRIATE COLON TARGET DRUG DELIVERY SYSTEMS OF METRONIDAZOLE: DEVELOPMENT AND EVALUATION

2020 ◽  
Vol 9 (3) ◽  
Author(s):  
Bijay Kumar Sahoo ◽  
Sidheswar Prasad Pattajoshi ◽  
Sandhyarani Pattajoshi
Keyword(s):  
Drug Release ◽  
Guar Gum ◽  
Methyl Cellulose ◽  
Matrix Tablets ◽  
Natural Polymers ◽  
Drug Release Rate ◽  
Hydroxypropyl Methyl Cellulose ◽  
Enteric Coated ◽  
Synthetic And Natural Polymers

The aim of present study was to develop colon targeted system for Metronidazole using guar gum and xanthan gum. Tablet matrices containing 10–60% of tablet weight of guar gum (F1–F6) were prepared by direct compression and subjected to in vitro release studies to explore their sustained release in the colon. Various release retarding synthetic and natural polymers, namely, hydrogenated castor oil, hydroxypropyl methyl cellulose, xanthan gum, and ethyl cellulose, Eudragit RL 100, were incorporated to modify the drug release rate from the guar gum matrix tablets. Matrix tablets were enteric coated with hydroxypropyl methyl cellulose phthalate as an enteric polymer. Various synthetic and natural polymers were incorporated to F6 to modify the drug release rate. Different 15 matrix tablet formulations (F6–F20) were enteric coated with hydroxypropyl methyl cellulose phthalate. The in-vitro drug release study was undertaken at 37±0.5°C in 0.1N HCl for 2 h; followed by pH 7.4 phosphate buffer (3h) finally in, simulated colonic fluid pH 6.8 phosphate buffer 20 h. The formulation F6, F13 and F20 showed promising sustained release results having median dissolution time (MDT) values: 8.25, 7.97, and 7.64, respectively. When studies were continued in colonic fluids, matrix tablets released almost 100% drug. whereas, Metronidazole enteric  formulations did not release drug in stomach and small intestine, but delivered drug to the colon resulting in slow absorption of the drug and making drug available for local action in the colon. Keywords:  Colon Target Delivery, Guar gum, Metronidazole, Enteric coated, Tablet Matrices

DEVELOPMENT AND CHARACTERIZATION OF NOVEL SITE SPECIFIC FLOATING-MUCOADHESIVE TABLETS BEARING 5-FLOUROURACIL FOR STOMACH TARGETING.

INDIAN DRUGS ◽  
2014 ◽  
Vol 51 (09) ◽  
pp. 23-30
Author(s):  
P Bhardwaj ◽  
◽  
R Singh ◽  
A Swarup
Keyword(s):  
Drug Release ◽  
Methyl Cellulose ◽  
Gastric Fluid ◽  
Simulated Gastric Fluid ◽  
Wet Granulation ◽  
Prolonged Release ◽  
Mucoadhesive Tablets

Object of present investigation was to develop and characterize such a gastroretentive tablet, which provides the synergism effect of adhesiveness and floating property for prolonged release of 5-flourouracil within the stomach. The floating mucoadhesive tablets were prepared by the wet granulation method using different ratios of hydroxy propyl methyl cellulose (HPMC K4MCR) and Carbopol 934P as polymers. The prepared floating-mucoadhesive tables were characterized for hardness, detachment stress, floating properties, swelling index and surface morphology by SEM. The in vitro drug release and floating behaviour were studied in simulated gastric fluid (SGF) at pH 1.2. Different kinetic models for drug release were as well applied. Formulations of T-9 batch were furthermore subjected to stability and in vivo radiographic studies.

Sign in / Sign up

Export Citation Format

Share Document