scholarly journals On Novel Access and Scheduling Schemes for IoT Communications

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Zheng Jiang ◽  
Bin Han ◽  
Peng Chen ◽  
Fengyi Yang ◽  
Qi Bi

The Internet of Things (IoT) is expected to foster the development of 5G wireless networks and requires the efficient support for a large number of simultaneous short message communications. To address these challenges, some existing works utilize new waveform and multiuser superposition transmission schemes to improve the capacity of IoT communication. In this paper, we will investigate the spatial degree of freedom of IoT devices based on their distribution, then extend the multiuser shared access (MUSA) which is one of the typical MUST schemes to spatial domain, and propose two novel schemes, that is, the preconfigured access scheme and the joint spatial and code domain scheduling scheme, to enhance IoT communication. The results indicate that the proposed schemes can reduce the collision rate dramatically during the IoT random access procedure and improve the performance of IoT communication obviously. Based on the simulation results, it is also shown that the proposed scheduling scheme can achieve the similar performance to the corresponding brute-force scheduling but with lower complexity.

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Dong Wang ◽  
Xiaosong Zhang ◽  
Jiang Ming ◽  
Ting Chen ◽  
Chao Wang ◽  
...  

Firmware vulnerability is an important target for IoT attacks, but it is challenging, because firmware may be publicly unavailable or encrypted with an unknown key. We present in this paper an attack on Short Message Service (SMS for short) authentication code which aims at gaining the control of IoT devices without firmware analysis. The key idea is based on the observation that IoT device usually has an official application (app for short) used to control itself. Customer needs to register an account before using this app, phone numbers are usually suggested to be the account name, and most of these apps have a common feature, called Reset Your Password, that uses an SMS authentication code sent to customer phone to authenticate the customer when he forgot his password. We found that an attacker can perform brute-force attack on this SMS authentication code automatically by overcoming several challenges, then he can steal the account to gain the control of IoT devices. In our research, we have implemented a prototype tool, called SACIntruder, to enable performing such brute-force attack test on IoT devices automatically. We evaluated it and successfully found 12 zero-day vulnerabilities including smart lock, sharing car, smart watch, smart router, etc. We also discussed how to prevent this attack.


Technologies ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 28 ◽  
Author(s):  
Hiroshi Watanabe ◽  
Howie Fan

The widespread computer network has been changing drastically and substantially since blockchain and IoT entered the stage. Blockchain is good at protecting data transactions between logical nodes with a desirable guaranty. Internet of Things (IoT), on the other hand, by providing ultimate convenience to consumers, is expected to give rise to many various merits in a broad business scene. The security of IoT is still an open problem and if blockchain can reinforce IoT security, as many authors have hoped in recent papers, these newcomers appear to make a good collaboration to reinforce IoT security. However, software copes with logical nodes and IoT involves a vast number of physical nodes (IoT devices). Enabling blockchain to protect IoT cannot be brought to reality without respectively identifying logical and physical nodes. This is identical to the Proof-of-Trust problem. In this article, we propose a conceptual solution—Blockchained IoT—and show that this concept is able to be realized on-chip level using mass-produced dynamical random access memory (DRAM). We have completed the first test of longevity and temperature dependence (−40 °C to 105 °C) to confirm the necessary characteristics for the 5G base stations that are known to have an issue of self-heating. Furthermore, we have coarsely evaluated the probability of two DRAM IC chips being associated with an identical cyber-physical chip identification accidentally. Then, such a probability is minimal.


Impact ◽  
2019 ◽  
Vol 2019 (10) ◽  
pp. 61-63 ◽  
Author(s):  
Akihiro Fujii

The Internet of Things (IoT) is a term that describes a system of computing devices, digital machines, objects, animals or people that are interrelated. Each of the interrelated 'things' are given a unique identifier and the ability to transfer data over a network that does not require human-to-human or human-to-computer interaction. Examples of IoT in practice include a human with a heart monitor implant, an animal with a biochip transponder (an electronic device inserted under the skin that gives the animal a unique identification number) and a car that has built-in sensors which can alert the driver about any problems, such as when the type pressure is low. The concept of a network of devices was established as early as 1982, although the term 'Internet of Things' was almost certainly first coined by Kevin Ashton in 1999. Since then, IoT devices have become ubiquitous, certainly in some parts of the world. Although there have been significant developments in the technology associated with IoT, the concept is far from being fully realised. Indeed, the potential for the reach of IoT extends to areas which some would find surprising. Researchers at the Faculty of Science and Engineering, Hosei University in Japan, are exploring using IoT in the agricultural sector, with some specific work on the production of melons. For the advancement of IoT in agriculture, difficult and important issues are implementation of subtle activities into computers procedure. The researchers challenges are going on.


Sensors ◽  
2021 ◽  
Vol 21 (12) ◽  
pp. 4194
Author(s):  
Fulvio Babich ◽  
Giulia Buttazzoni ◽  
Francesca Vatta ◽  
Massimiliano Comisso

This study proposes a set of novel random access protocols combining Packet Repetition (PR) schemes, such as Contention Resolution Diversity Slotted Aloha (CRDSA) and Irregular Repetition SA (IRSA), with Non Orthogonal Multiple Access (NOMA). Differently from previous NOMA/CRDSA and NOMA/IRSA proposals, this work analytically derives the energy levels considering two realistic elements: the residual interference due to imperfect Interference Cancellation (IC), and the presence of requirements on the power spent for the transmission. More precisely, the energy-limited scenario is based on the relationship between the average available energy and the selected code modulation pair, thus being of specific interest for the implementation of the Internet of Things (IoT) technology in forthcoming fifth-generation (5G) systems. Moreover, a theoretical model based on the density evolution method is developed and numerically validated by extensive simulations to evaluate the limiting throughput and to explore the actual performance of different NOMA/PR schemes in energy-constrained scenarios.


IoT ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 140-162
Author(s):  
Hung Nguyen-An ◽  
Thomas Silverston ◽  
Taku Yamazaki ◽  
Takumi Miyoshi

We now use the Internet of things (IoT) in our everyday lives. The novel IoT devices collect cyber–physical data and provide information on the environment. Hence, IoT traffic will count for a major part of Internet traffic; however, its impact on the network is still widely unknown. IoT devices are prone to cyberattacks because of constrained resources or misconfigurations. It is essential to characterize IoT traffic and identify each device to monitor the IoT network and discriminate among legitimate and anomalous IoT traffic. In this study, we deployed a smart-home testbed comprising several IoT devices to study IoT traffic. We performed extensive measurement experiments using a novel IoT traffic generator tool called IoTTGen. This tool can generate traffic from multiple devices, emulating large-scale scenarios with different devices under different network conditions. We analyzed the IoT traffic properties by computing the entropy value of traffic parameters and visually observing the traffic on behavior shape graphs. We propose a new method for identifying traffic entropy-based devices, computing the entropy values of traffic features. The method relies on machine learning to classify the traffic. The proposed method succeeded in identifying devices with a performance accuracy up to 94% and is robust with unpredictable network behavior with traffic anomalies spreading in the network.


Symmetry ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 156
Author(s):  
Juntao Zhu ◽  
Hong Ding ◽  
Yuchen Tao ◽  
Zhen Wang ◽  
Lanping Yu

The spread of a computer virus among the Internet of Things (IoT) devices can be modeled as an Epidemic Containment (EC) game, where each owner decides the strategy, e.g., installing anti-virus software, to maximize his utility against the susceptible-infected-susceptible (SIS) model of the epidemics on graphs. The EC game’s canonical solution concepts are the Minimum/Maximum Nash Equilibria (MinNE/MaxNE). However, computing the exact MinNE/MaxNE is NP-hard, and only several heuristic algorithms are proposed to approximate the MinNE/MaxNE. To calculate the exact MinNE/MaxNE, we provide a thorough analysis of some special graphs and propose scalable and exact algorithms for general graphs. Especially, our contributions are four-fold. First, we analytically give the MinNE/MaxNE for EC on special graphs based on spectral radius. Second, we provide an integer linear programming formulation (ILP) to determine MinNE/MaxNE for the general graphs with the small epidemic threshold. Third, we propose a branch-and-bound (BnB) framework to compute the exact MinNE/MaxNE in the general graphs with several heuristic methods to branch the variables. Fourth, we adopt NetShiled (NetS) method to approximate the MinNE to improve the scalability. Extensive experiments demonstrate that our BnB algorithm can outperform the naive enumeration method in scalability, and the NetS can improve the scalability significantly and outperform the previous heuristic method in solution quality.


Sensors ◽  
2019 ◽  
Vol 19 (6) ◽  
pp. 1339 ◽  
Author(s):  
Hasan Islam ◽  
Dmitrij Lagutin ◽  
Antti Ylä-Jääski ◽  
Nikos Fotiou ◽  
Andrei Gurtov

The Constrained Application Protocol (CoAP) is a specialized web transfer protocol which is intended to be used for constrained networks and devices. CoAP and its extensions (e.g., CoAP observe and group communication) provide the potential for developing novel applications in the Internet-of-Things (IoT). However, a full-fledged CoAP-based application may require significant computing capability, power, and storage capacity in IoT devices. To address these challenges, we present the design, implementation, and experimentation with the CoAP handler which provides transparent CoAP services through the ICN core network. In addition, we demonstrate how the CoAP traffic over an ICN network can unleash the full potential of the CoAP, shifting both overhead and complexity from the (constrained) endpoints to the ICN network. The experiments prove that the CoAP Handler helps to decrease the required computation complexity, communication overhead, and state management of the CoAP server.


IEEE Access ◽  
2017 ◽  
Vol 5 ◽  
pp. 26354-26363 ◽  
Author(s):  
Jialing Bai ◽  
Guangliang Ren

Sign in / Sign up

Export Citation Format

Share Document