scholarly journals A Wideband Antenna with Circular and Rectangular Shaped Slots for Mobile Phone Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Wei-Hua Zong ◽  
Xiao-Mei Yang ◽  
Xia Xiao ◽  
Shan-Dong Li ◽  
Xiang-Yang Wei ◽  
...  
Keyword(s):  
Transmission Line ◽  
Mobile Phone ◽  
Impedance Matching ◽  
Ground Plane ◽  
Slot Antenna ◽  
Microstrip Transmission Line ◽  
Rectangular Shape ◽  
Antenna Size ◽  
Wideband Antenna ◽  
Mobile Phone Applications

A wideband slot antenna for mobile phone applications is proposed. The antenna has two slots with open ends etched on the opposite edges of the ground plane. The main slot, of total length of 59 mm, is composed of a rectangle connected to a circle having radius of 5 mm. Another slot, having a rectangular shape with width of 2.8 mm and length of 26 mm, is employed to enhance the antenna bandwidth. The slots are fed by means of a rectangular monopole connected to a circular patch joined to a bent 50 Ω microstrip transmission line forming two right angles. To obtain a wideband impedance matching, the upper edge of the monopole and a part of the feeding line evolve along the top edge of the two slots. To reduce the antenna size, the upper part of the board above the slot (just 3 mm from the slot) is folded vertically to the ground plane. The measured bandwidth of the antenna is 0.698–1.10 GHz and 1.64–2.83 GHz covering LTE700/2300/2500, GSM850/900/1800/1900, and UMTS bands.

scholarly journals Wideband Dual-Element Antenna Array for MIMO Mobile Phone Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Yuanqiang Wang ◽  
Jie Yang ◽  
Shangfu Hao ◽  
Xiao Zhang
Keyword(s):  
Mobile Phone ◽  
Antenna Array ◽  
Correlation Coefficient ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ergodic Capacity ◽  
Planar Antenna ◽  
Antenna Size ◽  
Mobile Phone Applications ◽  
Planar Antenna Array

A printed dual-element antenna array for LTE MIMO mobile phone applications is presented in this paper. The two array elements are symmetrically placed with the same dimensions, and each of the them consists of a novel driven strip and a wandering shorting strip. The driven strip is a whole loop, which improves the impedance matching for the upper band. Therefore, the bandwidth coverage is expanded and the antenna size is minimized at the same time. In addition, thanks to the protruded ground on the ground plane, the antenna isolation between the two array elements is significantly enhanced. The proposed planar antenna array successfully covers the seven operating bands of GSM850/900/1800/1900/UMTS2100/LTE2300/2500, and the isolation is more than 10 dB. The prototype was fabricated and tested, withSparameters, efficiency, radiation patterns, envelop correlation coefficient (ECC), and ergodic capacity presented. From the measured results, it is indicated that the antenna array has excellent and reliable performances when it is applied in MIMO applications.

An Ultra-Wideband Antenna for Mobile Handset Applications

2011 ◽  
Vol 383-390 ◽  
pp. 4457-4460 ◽  
Author(s):  
Wei Hua Zong ◽  
Xiao Yun Qu ◽  
Yong Xin Guo ◽  
Ming Xin Shao
Keyword(s):  
Mobile Phone ◽  
Microstrip Line ◽  
Ground Plane ◽  
Hybrid Structure ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Wideband Antenna ◽  
Mobile Phone Application ◽  
Circular Patch ◽  
Mobile Handset

A printed open-ended slot antenna is designed for mobile phone application. The slot has a hybrid structure of a rectangle and a circle cut out of a 60mm×115mm ground plane, and fed by a microstrip line with a circular patch connected to a bent strip on the upper part of the patch. The proposed antenna provides a wide -6dB bandwidth covering 1.73-11GHz. It can be used in DCS1800, PCS1900, UMTS2000, TD-SCDMA, Bluetooth, LTE2.5GHz, WiMax, and UWB

scholarly journals Frequency reconfigurable monopole antenna with DGS for ISM band applications

2018 ◽  
Vol 69 (4) ◽  
pp. 293-299 ◽  
Author(s):  
Boddapati T. P. Madhav ◽  
Shaik Rajiya ◽  
Badugu P. Nadh ◽  
Munuswami S. Kumar
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
Transmission Line ◽  
Ground Plane ◽  
Reconfigurable Antenna ◽  
Pin Diodes ◽  
Microstrip Transmission Line ◽  
Ism Band ◽  
Frequency Reconfigurable Antenna ◽  
Antenna Model

Abstract In this article a compact frequency reconfigurable antenna is presented for wireless communication applications of industrial, scientific and medical band (ISM). The proposed antenna model is designed with the dimensions of 58mm×48 mm on FR4 epoxy of dielectric constant 4.4 with the thickness of 0.8 mm. The proposed antenna consists of defected T-shape ground plane, which acts as a reflector. In the design of frequency reconfigurable antenna, BAR 64-02V PIN diodes are used as switching elements and antenna is fed by microstrip transmission line. The proposed antenna can switch at different frequencies (2.5 GHz, 2.3 GHz and 2.2 GHz) depending on the biasing voltage applied to the PIN diodes. The current antenna showing VSWR < 2 in the operating band and providing peak realized gain of 3.2 dBi. A good matching obtained between expected and the measured results.

scholarly journals Planar MIMO Antenna with Slits for WBAN Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Do-Gu Kang ◽  
Jinpil Tak ◽  
Jaehoon Choi
Keyword(s):  
Resonant Frequency ◽  
Human Body ◽  
Impedance Matching ◽  
Ground Plane ◽  
Antenna Size ◽  
Mimo Antenna ◽  
Ism Band ◽  
Antenna Performance

A planar MIMO antenna with slits for WBAN applications is proposed. The antenna consists of two PIFAs, ground pads, and two slits. By adding ground pads, the antenna size is reduced with improved impedance matching. Through two slits in a ground plane, the isolation characteristic is improved and the resonant frequency can be controlled. To analyze the antenna performance on a human body, the proposed antenna on a human equivalent flat phantom is investigated through simulations. Regardless of the existence of the phantom, the antenna operates in 2.4 GHz ISM band with the isolation higher than 18 dB.

An Easily Realizable Band-Notched UWB Antenna

2013 ◽  
Vol 677 ◽  
pp. 307-310
Author(s):  
Ching Fang Tseng ◽  
Shu Cheng Lu
Keyword(s):  
Transmission Line ◽  
Ground Plane ◽  
Monopole Antenna ◽  
Radiation Patterns ◽  
Uwb Antenna ◽  
Microstrip Transmission Line ◽  
Directional Radiation ◽  
Good Agreement

An easily realizable ultrawideband (UWB) monopole antenna, with band-notched characteristics, is presented. The antenna consists of a circular metal radiation patch, fed by a 50-Ω microstrip transmission line and a rectangular ground plane with a notch cut into it. By etching a modified U-shaped slot in the radiating patch and by properly tuning its location and form, band-rejected filtering properties can be achieved easily in WiMAX/WLAN bands. It has good omni-directional radiation patterns in H-plane and a good agreement between simulation and measurement.

Modified CPW-fed rotated E-slot antenna for LTE/WiMAX applications

2014 ◽  
Vol 7 (5) ◽  
pp. 535-542 ◽  
Author(s):  
Geetanjali Singla ◽  
Rajesh Khanna
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Slot Antenna ◽  
Rectangular Patch ◽  
Resonant Modes

In this paper, a rotated E-slot antenna with modified coplanar waveguide (CPW) feeding is presented to obtain broadband characteristics. The antenna comprises of a planar rectangular patch element embedded with E-slot rotated 90° anticlockwise on the radiating side. The CPW feed is modified by extending the ground plane throughout the substrate to surround the rectangular patch. This structure is capable of generating three separate resonant modes with good impedance matching. The antenna is designed on an FR4 substrate of 1.6 mm thickness, covering bands from 3.4 to 3.6 GHz for LTE and 3.4–3.694 GHz for worldwide interoperability for microwave access (WiMAX) systems. The proposed antenna provides good return loss S11and impedance behavior.

Sign in / Sign up

Export Citation Format

Share Document