scholarly journals A New Appliance for Improving the Miniscrew Stability

2016 ◽  
Vol 2016 ◽  
pp. 1-6
Author(s):  
Nurhat Ozkalayci ◽  
Mehmet Yetmez
Keyword(s):  
Finite Element ◽  
Stability Analysis ◽  
Primary Stability ◽  
Position Angle ◽  
Cortical Layer ◽  
Finite Element Models ◽  
Constant Force ◽  
The Stability

The aim of this study is to present a new appliance called stability leg designed as an additional anchorage providing device for increasing primary stability of orthodontic miniscrew. For this purpose, two finite element models (FEMs) with two different cortical layer thicknesses of 1 mm and 2 mm are considered. In order to achieve the stability analysis, these two main models, namely, Model I and Model II, are divided into subgroups according to stability leg lengths. Two types of forces are considered. (1) First force is a constant force of 1 N which is applied to all two models. (2) Second force is defined in the range of 1–4 N. Each of 1, 2.5, and 4 N of the second force is applied with a position angle ranging from 34° to 44°. Results show that stability of a miniscrew with 5 mm leg increases primary stability of the miniscrew.

scholarly journals Out-of-plane local mechanism analysis with finite element method

2021 ◽  
Vol 8 (1) ◽  
pp. 130-136
Author(s):  
Roberto Spagnuolo
Keyword(s):  
Finite Element ◽  
Masonry Walls ◽  
Finite Element Models ◽  
Mechanism Analysis ◽  
Fem Method ◽  
Local Mechanism ◽  
Out Of Plane ◽  
Smeared Crack ◽  
The Stability ◽  
No Tension Material

Abstract The stability check of masonry structures is a debated problem in Italy that poses serious problems for its extensive use. Indeed, the danger of out of plane collapse of masonry walls, which is one of the more challenging to evaluate, is traditionally addressed not using finite element models (FEM). The power of FEM is not properly used and some simplified method are preferred. In this paper the use of the thrust surface is suggested. This concept allows to to evaluate the eccentricity of the membrane stresses using the FEM method. For this purpose a sophisticated, layered, finite element with a no-tension material is used. To model a no-tension material we used the smeared crack method as it is not mesh-dependent and it is well known since the early ’80 in an ASCE Report [1]. The described element has been implemented by the author in the program Nòlian by Softing.

Influence of a localized plastic layer on embankment stability

1977 ◽  
Vol 14 (4) ◽  
pp. 524-530 ◽  
Author(s):  
C. D. Thompson ◽  
J. J. Emery
Keyword(s):  
Finite Element ◽  
Stability Analysis ◽  
Clayey Soil ◽  
Plastic Material ◽  
Plastic Layer ◽  
Natural Soil ◽  
General Terms ◽  
Clayey Silt ◽  
The Stability ◽  
Embankment Stability

Conventional stability analyses of a 47 ft (14.3 m) high embankment constructed of clayey silt fill indicated a satisfactory design with 2:1 slopes. However, cracking of the fill and movements of the embankment occurred when its height reached 32 ft (9.8 m). Investigation revealed that, in general terms, the geotechnical profile employed for the stability analysis was satisfactory. There was a localized layer of firm clayey soil at the interface between the fill and natural soil, which coincided with the observed cracks and the zone of high pore pressure.Construction scheduling was critical, and an initial wedge analysis showed that a 17 ft (5.2 m) high berm would ensure adequate safety during completion of the fill. A detailed investigation followed to determine the actual deformation mechanism responsible for the cracking. This included plane strain finite element runs using estimated moduli values. It was concluded that the cracking was caused by ‘spreading’ of plastic material at or near the base of the embankment. This case history illustrates that localized layers of weaker soil can be critical even when construction has been carefully controlled.

Stability and Response of Rotors Supported on Active Magnetic Bearings

1993 ◽  
Author(s):  
K. Ramesh ◽  
R. G. Kirk
Keyword(s):  
Finite Element ◽  
Stability Analysis ◽  
Transfer Matrix ◽  
Magnetic Bearings ◽  
Active Magnetic Bearings ◽  
Finite Element Program ◽  
Element Program ◽  
Matrix Codes ◽  
The Stability

Abstract A PC-based program has been developed which is capable of performing stability analysis and response calculations of rotor-bearing systems. The paper discusses the modeling of rotors supported on active magnetic bearings (AMB) and highlights the advantages in the modeling using the finite element method, over the transfer matrix method. An 8-stage centrifugal compressor supported on AMB was chosen for the case study. The results for the stability analysis, obtained using the finite element program was compared with those obtained by the well established transfer matrix codes. The results of unbalance response, including the effects of sensor non collocation are presented and this demonstrates how an AMB supported rotor can experience a synchronous instability for selected sensor locations and balance distributions.

scholarly journals Theoretical stability analysis of mixed finite element model of shale-gas flow with geomechanical effect

2020 ◽  
Vol 75 ◽  
pp. 33
Author(s):  
Mohamed F. El-Amin ◽  
Jisheng Kou ◽  
Shuyu Sun
Keyword(s):  
Finite Element ◽  
Stability Analysis ◽  
Shale Gas ◽  
Gas Flow ◽  
Mixed Finite Element ◽  
Mixed Finite Element Method ◽  
Element Model ◽  
Mathematical Proofs ◽  
The Stability ◽  
Shale Gas Transport

In this work, we introduce a theoretical foundation of the stability analysis of the mixed finite element solution to the problem of shale-gas transport in fractured porous media with geomechanical effects. The differential system was solved numerically by the Mixed Finite Element Method (MFEM). The results include seven lemmas and a theorem with rigorous mathematical proofs. The stability analysis presents the boundedness condition of the MFE solution.

The Solution of Lateral Heat Loss Problem Using Collocation Method with Cubic B-Splines Finite Element

2011 ◽  
Vol 110-116 ◽  
pp. 3184-3190
Author(s):  
Necdet Bildik ◽  
Duygu Dönmez Demir
Keyword(s):  
Finite Element ◽  
Stability Analysis ◽  
Heat Loss ◽  
Collocation Method ◽  
Numerical Solutions ◽  
Analytic Solutions ◽  
B Splines ◽  
Stability Method ◽  
The Stability ◽  
Lateral Heat

This paper deals with the solutions of lateral heat loss equation by using collocation method with cubic B-splines finite elements. The stability analysis of this method is investigated by considering Fourier stability method. The comparison of the numerical solutions obtained by using this method with the analytic solutions is given by the tables and the figure.

Finite Element Analysis for the Stiffness and the Buckling of Corrugated Tubes in Heat Exchanger

2012 ◽  
Vol 468-471 ◽  
pp. 1675-1680 ◽  
Author(s):  
Xiao Jing Wang ◽  
Zhi Min Wang ◽  
Nian Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Stability Analysis ◽  
Heat Exchanger ◽  
Heat Exchangers ◽  
External Pressure ◽  
Element Analysis ◽  
Value Analysis ◽  
Compressive Pressure ◽  
The Stability

Corrugated tubes in a heat exchanger are analyzed by using the FEA methods. And the formula how to compute single wave’s rigidity is obtained. Besides, methods of analyzing the stability of corrugated tubes under internal compressive pressure and external pressure are proposed which include characteristic value analysis and non-linear stability analysis, thus providing theory basis for the stability research of heat exchangers.

Stability Analysis about the Impact of Soft Rock to the Underground Cavern Group

2013 ◽  
Vol 706-708 ◽  
pp. 560-564
Author(s):  
Yi Huan Zhu ◽  
Guo Jian Shao ◽  
Zhi Gao Dong
Keyword(s):  
Finite Element ◽  
Rock Mass ◽  
Stability Analysis ◽  
Soft Rock ◽  
Element Model ◽  
Underground Excavation ◽  
Power Station ◽  
Excavation Process ◽  
The Stability ◽  
The Impact

Soft rock is frequently encountered in underground excavation process. It is difficult to excavate and support in soft rock mass which has low strength, large deformation and needs much time to be out of shape but little time to be self-stabilized. Based on a large underground power station, finite element model analysis was carried out to simulate the excavation process and the results of displacement, stress and plasticity area were compared between supported and unsupported conditions to evaluate the stability of the rock mass.

CRITICAL LOADS OF SQUARE PLATES UNDER DIFFERENT INPLANE LOAD CONFIGURATIONS ON OPPOSITE EDGES

2001 ◽  
Vol 01 (02) ◽  
pp. 283-291 ◽  
Author(s):  
S. G. LEE ◽  
S. C. KIM ◽  
J. G. SONG
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Stability Analysis ◽  
Critical Load ◽  
Critical Loads ◽  
Patch Load ◽  
Fixity Factor ◽  
The Stability ◽  
Opposite Tendency ◽  
Width Factor

The elastic critical load coefficients of square plates, under different inplane load configurations on opposite plate edges, are determined and the results compared. The stability analysis was performed by a finite element method that was developed by the authors. The parameters considered in the analysis are the Kinney's fixity factor, and the width factor of the patch load. It was found that the coefficients of the critical loads increase with increasing values of fixity and width factors. The opposite tendency is that a plate under a patch loaded towards the two corners of an edge is more stable than a plate loaded concentrically at the center of the edge.

Sign in / Sign up

Export Citation Format

Share Document