scholarly journals Structural Stability and Dynamics of FGM Plates Using an Improved 8-ANS Finite Element

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Weon-Tae Park
Keyword(s):  
Finite Element ◽  
Boundary Conditions ◽  
Power Law ◽  
Numerical Solutions ◽  
Volume Fraction ◽  
Shell Element ◽  
Buckling Analysis ◽  
Sigmoid Function ◽  
Various Boundary Conditions ◽  
Power Law Index

I investigate the vibration and buckling analysis of functionally graded material (FGM) structures, using a modified 8-node shell element. The properties of FGM vary continuously through the thickness direction according to the volume fraction of constituents defined by sigmoid function. The modified 8-ANS shell element has been employed to study the effect of power law index on dynamic analysis of FGM plates with various boundary conditions and buckling analysis under combined loads, and interaction curves of FGM plates are carried out. To overcome shear and membrane locking problems, the assumed natural strain method is employed. In order to validate and compare the finite element numerical solutions, the reference results of plates based on Navier’s method, the series solutions of sigmoid FGM (S-FGM) plates are compared. Results of the present study show good agreement with the reference results. The solutions of vibration and buckling analysis are numerically illustrated in a number of tables and figures to show the influence of power law index, side-to-thickness ratio, aspect ratio, types of loads, and boundary conditions in FGM structures. This work is relevant to the simulation of wing surfaces, aircrafts, and box structures under various boundary conditions and loadings.

scholarly journals Finite Element Analysis of Functionally Graded Beams using Different Beam Theories

2020 ◽  
Vol 6 (11) ◽  
pp. 2086-2102
Author(s):  
Farshad Rahmani ◽  
Reza Kamgar ◽  
Reza Rahgozar
Keyword(s):  
Finite Element ◽  
Boundary Conditions ◽  
Power Law ◽  
Volume Fraction ◽  
Slenderness Ratio ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Transverse Shear Strain ◽  
Material Distribution ◽  
Beam Theories

The present study deals with buckling, free vibration, and bending analysis of Functionally Graded (FG) and porous FG beams based on various beam theories. Equation of motion and boundary conditions are derived from Hamilton’s principle, and the finite element method is adopted to solve problems numerically. The FG beams are graded through the thickness direction, and the material distribution is controlled by power-law volume fraction. The effects of the different values of the power-law index, porosity exponent, and different boundary conditions on bending, natural frequencies and buckling characteristics are also studied. A new function is introduced to approximate the transverse shear strain in higher-order shear deformation theory. Furthermore, shifting the position of the neutral axis is taken into account. The results obtained numerically are validated with results obtained from ANSYS and those available in the previous work. The results of this study specify the crucial role of slenderness ratio, material distribution, and porosity condition on the characteristic of FG beams. The deflection results obtained by the proposed function have a maximum of six percent difference when the results are compared with ANSYS. It also has better results in comparison with the Reddy formulae, especially when the beam becomes slender. Doi: 10.28991/cej-2020-03091604 Full Text: PDF

A modified couple stress theory for buckling analysis of higher order inhomogeneous microbeams with porosities

2018 ◽  
Vol 233 (8) ◽  
pp. 2855-2866 ◽  
Author(s):  
Farzad Ebrahimi ◽  
Fateme Mahmoodi
Keyword(s):  
Boundary Conditions ◽  
Power Law ◽  
Couple Stress ◽  
Volume Fraction ◽  
Couple Stress Theory ◽  
Modified Couple Stress Theory ◽  
Functionally Graded ◽  
Stress Theory ◽  
Various Boundary Conditions ◽  
Modified Couple Stress

In this paper, buckling behavior of a higher order functionally graded microbeam with porosities is investigated based on the modified couple stress theory and the exact position of the neutral axis. Porosities are evenly and unevenly distributed inside the functionally graded microbeam. Material properties of the functionally graded microbeam are assumed to vary in the thickness direction through a modified form of power-law distribution in which the volume fraction of porosities is considered. The governing equations are derived by using Hamilton's principle and an analytical method is employed to solve these equations for various boundary conditions. The present formulation and numerical results demonstrate a good agreement with some available cases in the literature. Influences of several important parameters such as power-law exponent, porosity distributions, porosity volume fraction, slenderness ratio, and various boundary conditions on buckling loads of porous functionally graded microbeams are investigated and discussed in detail.

MECHANICAL VIBRATION AND BUCKLING ANALYSIS OF FGM PLATES AND SHELLS USING A FOUR-NODE QUASI-CONFORMING SHELL ELEMENT

2008 ◽  
Vol 08 (02) ◽  
pp. 203-229 ◽  
Author(s):  
SUNG-CHEON HAN ◽  
GILSON RESCOBER LOMBOY ◽  
KI-DU KIM
Keyword(s):  
Numerical Solutions ◽  
Volume Fraction ◽  
Mechanical Vibration ◽  
Shear Deformation Theory ◽  
Homogeneous Element ◽  
Shell Element ◽  
Functionally Graded ◽  
Sigmoid Function ◽  
Rectangular Plates ◽  
Plates And Shells

In this paper, we investigate the natural frequencies and buckling loads of functionally graded material (FGM) plates and shells, using a quasi-conforming shell element that accounts for the transverse shear strains and rotary inertia. The eigenvalues of the FGM plates and shells are calculated by varying the volume fraction of the ceramic and metallic constituents using a sigmoid function, but the Poisson ratios of the FGM plates and shells are assumed to be constant. The expressions for the membrane, bending and shear stiffness of FGM shell elements are more a complicated combination of material properties than a homogeneous element. In order to validate the finite element numerical solutions, the Navier solutions for rectangular plates based on the first order shear deformation theory are also presented. The present numerical solutions for composite and sigmoid FGM (S-FGM) plates and shells are verified by the Navier solutions and various examples of composite and FGM structures. The present results are in good agreement with the Navier theoretical solutions.

Upon Impact Numerical Modeling of Foam Materials

2017 ◽  
Vol 54 (2) ◽  
pp. 195-202
Author(s):  
Vasile Nastasescu ◽  
Silvia Marzavan
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Numerical Modeling ◽  
Numerical Analysis ◽  
Numerical Methods ◽  
Boundary Conditions ◽  
General Character ◽  
Foam Material ◽  
Various Boundary Conditions ◽  
Specific Behaviour

The paper presents some theoretical and practical issues, particularly useful to users of numerical methods, especially finite element method for the behaviour modelling of the foam materials. Given the characteristics of specific behaviour of the foam materials, the requirement which has to be taken into consideration is the compression, inclusive impact with bodies more rigid then a foam material, when this is used alone or in combination with other materials in the form of composite laminated with various boundary conditions. The results and conclusions presented in this paper are the results of our investigations in the field and relates to the use of LS-Dyna program, but many observations, findings and conclusions, have a general character, valid for use of any numerical analysis by FEM programs.

scholarly journals Jet Impingement Heat Transfer of Confined Single and Double Jets with Non-Newtonian Power Law Nanofluid under the Inclined Magnetic Field Effects for a Partly Curved Heated Wall

2021 ◽  
Vol 13 (9) ◽  
pp. 5086
Author(s):  
Fatih Selimefendigil ◽  
Hakan F. Oztop ◽  
Ali J. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Particle Size ◽  
Aspect Ratio ◽  
Power Law ◽  
Volume Fraction ◽  
Inclined Magnetic Field ◽  
Magnetic Field Effects ◽  
Power Law Nanofluid ◽  
Power Law Index

Single and double impinging jets heat transfer of non-Newtonian power law nanofluid on a partly curved surface under the inclined magnetic field effects is analyzed with finite element method. The numerical work is performed for various values of Reynolds number (Re, between 100 and 300), Hartmann number (Ha, between 0 and 10), magnetic field inclination (γ, between 0 and 90), curved wall aspect ratio (AR, between 01. and 1.2), power law index (n, between 0.8 and 1.2), nanoparticle volume fraction (ϕ, between 0 and 0.04) and particle size in nm (dp, between 20 and 80). The amount of rise in average Nusselt (Nu) number with Re number depends upon the power law index while the discrepancy between the Newtonian fluid case becomes higher with higher values of power law indices. As compared to case with n = 1, discrepancy in the average Nu number are obtained as −38% and 71.5% for cases with n = 0.8 and n = 1.2. The magnetic field strength and inclination can be used to control the size and number or vortices. As magnetic field is imposed at the higher strength, the average Nu reduces by about 26.6% and 7.5% for single and double jets with n greater than 1 while it increases by about 4.78% and 12.58% with n less than 1. The inclination of magnetic field also plays an important role on the amount of enhancement in the average Nu number for different n values. The aspect ratio of the curved wall affects the flow field slightly while the average Nu variation becomes 5%. Average Nu number increases with higher solid particle volume fraction and with smaller particle size. At the highest particle size, it is increased by about 14%. There is 7% variation in the average Nu number when cases with lowest and highest particle size are compared. Finally, convective heat transfer performance modeling with four inputs and one output is successfully obtained by using Adaptive Neuro-Fuzzy Interface System (ANFIS) which provides fast and accurate prediction results.

Static Analysis of Moderately Thick Functionally Graded Plates With Various Boundary Conditions

2010 ◽  
Author(s):  
Nastaran Shahmansouri ◽  
Mohammad Mohammadi Aghdam ◽  
Kasra Bigdeli
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Closed Form Solution ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Rectangular Plates ◽  
Functionally Graded Plates ◽  
Various Boundary Conditions ◽  
Fg Plates ◽  
Ode Systems

The present study investigates static analyses of moderately thick FG plates. Using the First Order Shear Deformation Theory (FSDT), functionally graded plates subjected to transversely distributed loading with various boundary conditions are studied. Effective mechanical properties which vary from one surface of the plate to the other assumed to be defined by a power law form of distribution. Different ceramic-metal sets of materials are studied. Solution of the governing equations, including five equilibrium and eight constitutive equations, is obtained by the Extended Kantorovich Method (EKM). The system of thirteen Partial Differential Equations (PDEs) in terms of displacements, rotations, force and moment resultants are considered as multiplications of separable function of independent variables x and y. Then by successful utilization of the EKM these equations are converted to a double set of ODE systems in terms of x and y. The obtained ODE systems are then solved iteratively until final convergence is achieved. Closed form solution is presented for these ODE sets. It is shown that the method is very stable and provides fast convergence and highly accurate predictions for both thin and moderately thick plates. Comparison of the normal stresses at various points of rectangular plates and deflection of mid-point of the plate are presented and compared with available data in the literature. The effects of the volume fraction exponent n on the behavior of the normalized deflection, moment resultants and stresses of FG plates are also studied. To validate data for analysis fully clamped FG plates, another analysis was carried out using finite element code ANSYS. Close agreement is observed between predictions of the EKM and ANSYS.

scholarly journals Non-Newtonian effect on heat transfer and entropy generation of natural convection nanofluid flow inside a vertical wavy porous cavity

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
Mahbuba Tasmin ◽  
Preetom Nag ◽  
Zarin T. Hoque ◽  
Md. Mamun Molla
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Entropy Generation ◽  
Power Law ◽  
Volume Fraction ◽  
Local Entropy ◽  
Nanofluid Flow ◽  
Porosity Level ◽  
Power Law Index ◽  
Local Entropy Generation

AbstractA numerical study on heat transfer and entropy generation in natural convection of non-Newtonian nanofluid flow has been explored within a differentially heated two-dimensional wavy porous cavity. In the present study, copper (Cu)–water nanofluid is considered for the investigation where the specific behavior of Cu nanoparticles in water is considered to behave as non-Newtonian based on previously established experimental results. The power-law model and the Brinkman-extended Darcy model has been used to characterize the non-Newtonian porous medium. The governing equations of the flow are solved using the finite volume method with the collocated grid arrangement. Numerical results are presented through streamlines, isotherms, local Nusselt number and entropy generation rate to study the effects of a range of Darcy number (Da), volume fractions (ϕ) of nanofluids, Rayleigh numbers (Ra), and the power-law index (n). Results show that the rate of heat transfer from the wavy wall to the medium becomes enhanced by decreasing the power-law index but increasing the volume fraction of nanoparticles. Increase of porosity level and buoyancy forces of the medium augments flow strength and results in a thinner boundary layer within the cavity. At negligible porosity level of the enclosure, effect of volume fraction of nanoparticles over thermal conductivity of the nanofluids is imperceptible. Interestingly, when the Darcy–Rayleigh number $$Ra^*\gg 10$$ R a ∗ ≫ 10 , the power-law effect becomes more significant than the volume fraction effect in the augmentation of the convective heat transfer process. The local entropy generation is highly dominated by heat transfer irreversibility within the porous enclosure for all conditions of the flow medium. The particular wavy shape of the cavity strongly influences the heat transfer flow pattern and local entropy generation. Interestingly, contour graphs of local entropy generation and local Bejan number show a rotationally symmetric pattern of order two about the center of the wavy cavity.

scholarly journals Optimum response of functionally graded piezoelectric plates in thermal environments

2017 ◽  
Vol 35 (3) ◽  
pp. 606-617 ◽  
Author(s):  
Hossein Nourmohammadi ◽  
Bashir Behjat
Keyword(s):  
Power Law ◽  
Thermal Loading ◽  
Volume Fraction ◽  
Plate Theory ◽  
Poisson Ratio ◽  
Functionally Graded ◽  
Sensors And Actuators ◽  
Thermal Environments ◽  
Functionally Graded Piezoelectric ◽  
Power Law Index

AbstractIn this article, the static response of the functionally graded piezoelectric (FGP) plates with piezoelectric layers (sandwich FGPM) is studied based on the first order shear deformation plate theory. The plate is under mechanical, electrical and thermal loadings and finite element method is employed to obtain the solution of the equation. All mechanical, thermal and piezoelectric properties, except Poisson ratio, obey the power law distribution through the thickness. By solving the governing equation, optimum value of power law index is investigated in each type of loading. The effects of different volume fraction index, layer arrangements, various boundary conditions and different loading types, are studied on the deflection of FGPM plate. It is inferred that, the correlations between the deflection, power law index and layer arrangement are completely different in the mechanical and thermal loading and the optimum value of the power law index should be selected in each case separately. This optimum values can be used as a design criterion to build a reliable sensors and actuators in thermal environments.

Numerical Simulation for Heat Transfer of Nanofluid in a Rotating Circular Groove Using a Continuous Finite Element Scheme

2014 ◽  
Vol 1081 ◽  
pp. 175-179 ◽  
Author(s):  
Yong Yue Jiang ◽  
Ping Lin ◽  
Bo Tong Li ◽  
Lin Li
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Power Law ◽  
Initial Time ◽  
The Finite Element Method ◽  
Finite Element Scheme ◽  
Element Scheme ◽  
Circular Groove ◽  
Power Law Fluids ◽  
Power Law Index

In this paper, we investigate the heat transfer of the power-law-fluids-based nanofluids in a rotating circular groove. The circular groove rotates with a constant speed and the temperature on the wall of the groove is different from the temperature inside in the initial time. The effects of thermophoresis and Brownian are considered. The thermal conductivity of the nanofluids is taken as a constant. We solve the model with the finite element method directly and discretize them using a continuous finite element scheme in space and a modified midpoint scheme in time. From the results we can find that the heat transfer enhancement of the nanofluids increases as the power law index of the base fluid decreases.

Sign in / Sign up

Export Citation Format

Share Document