scholarly journals Synthesis and Characterization of Monometallic (Ag, Cu) and Bimetallic Ag-Cu Particles for Antibacterial and Antifungal Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Marta Paszkiewicz ◽  
Anna Gołąbiewska ◽  
Łukasz Rajski ◽  
Ewelina Kowal ◽  
Agnieszka Sajdak ◽  
...  
Keyword(s):  
Chemical Reduction ◽  
Experimental Studies ◽  
Colloidal Solutions ◽  
Chemical Reduction Method ◽  
Comprehensive Overview ◽  
Synthesis Parameters ◽  
Alloy Particles ◽  
Transmission Electron ◽  
Antibacterial And Antifungal

In this paper, the experimental studies are concerned with the effect of the synthesis parameters on the formation of monometallic Ag and Cu nanoparticles (NPs). We consider the synthesis strategies verification for the bimetallic core-shell and alloy particles preparation. It was successfully obtained by chemical reduction method. The obtained colloidal solution is characterized by the transmission electron microscopy (TEM) with energy-dispersive X-ray spectroscopy (EDX) data, UV-Vis spectra, particle size distribution, and zeta potential. This work presents a comprehensive overview of experimental studies of the most stable colloidal solutions to impregnate fabrics that will exhibit a bactericidal and fungicidal activity againstCandida albicans,Escherichia coli, andStaphylococcus aureus.

scholarly journals Synthesis and Characterization of Bifunctionalα-Fe2O3-Ag Nanoparticles

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Alvaro Ruíz-Baltazar ◽  
Simón Yobanny Reyes-López ◽  
Rodrigo Esparza ◽  
Miriam Estévez ◽  
Ángel Hernández-Martínez ◽  
...  
Keyword(s):  
Ag Nanoparticles ◽  
Bimetallic Nanoparticles ◽  
Chemical Reduction ◽  
Theoretical Models ◽  
Hybrid Nanoparticles ◽  
Chemical Reduction Method ◽  
Transmission Electron ◽  
Chloride Hexahydrate ◽  
The Individual

The synthesis ofα-Fe2O3-Ag bimetallic nanoparticles using a novel and simplified route is presented in this work. These hybrid nanoparticles were produced using a modification of the chemical reduction method by sodium borohydride (NaBH4). Fe(III) chloride hexahydrate (FeCl3·6H2O) and silver nitrate (AgNO3) as precursors were employed. Particles with semispherical morphology and dumbbell configuration were observed. High-resolution transmission electron microscopy (HRTEM) technique reveals the structure of the dumbbell-likeα-Fe2O3-Ag nanoparticles. Some theoretical models further confirm the formation of theα-Fe2O3-Ag structures. Analysis by cyclic voltammetry reveals an interesting catalytic behavior which is associated with the combination of the individual properties of the Ag andα-Fe2O3nanoparticles.

scholarly journals A study concerning the pretreatment of CNTs and its influence on the performance of NIB/CNTs amorphous catalyst

2006 ◽  
Vol 71 (11) ◽  
pp. 1153-1160 ◽  
Author(s):  
Chang Hu-Yuan ◽  
Feng Li ◽  
Li. Hua ◽  
Bin Zhang
Keyword(s):  
Selective Hydrogenation ◽  
Inductively Coupled Plasma ◽  
Acid Treatment ◽  
Chemical Reduction ◽  
X Ray Diffraction ◽  
Chemical Reduction Method ◽  
X Ray ◽  
Inductively Coupled ◽  
Selective Hydrogenation Of Acetylene ◽  
Transmission Electron

As prepared carbon nanotubes were pretreated with nitric acid (CNTs-HNO3) or ammonia (CNTs-NH3). Fourier transform infrared spectroscopy (FTIR) measurements showed that the surface of the nanotubes was functionalized with carboxylic and hydroxyl functional groups after the acid treatment and that basic groups containing nitrogen, such as N-H and C-N, were introduced to the surface of the nanotubes after the ammonia treatment. X-Ray diffraction analysis implied that the nickel residue in the CNTs was effectively removed by acid treatment. However, the nickel residue was only partially eliminated by ammonia pretreatment. NiB amorphous catalysts supported on CNTs-HNO3 and CNTs-NH3 were prepared by the impregnation-chemical reduction method and characterized by transmission electron microscopy (TEM), as well as inductively coupled plasma (ICP) spectroscopy and studied in the selective hydrogenation of acetylene. TEM measurements showed that a high density NiB particles of about 9 nm were homogeneously dispersed on the CNTs-NH3. However, NiB particles (13-23 nm)with amean size of 16 nm were scattered on the CNTs-HNO3.As a result, the activity and selectivity of NiB/CNTs-NH3 were higher than those of NiB/CNTs-HNO3 in the selective hydrogenation of acetylene.

Preparation and characterization of silver nanoparticles by chemical reduction method

2011 ◽  
Vol 82 (2) ◽  
pp. 513-517 ◽  
Author(s):  
Zaheer Khan ◽  
Shaeel Ahmed Al-Thabaiti ◽  
Abdullah Yousif Obaid ◽  
A.O. Al-Youbi
Keyword(s):  
Silver Nanoparticles ◽  
Reduction Method ◽  
Chemical Reduction ◽  
Chemical Reduction Method

Electrooxidation of Methanol on Carbon Supported Gold Nanoparticles

2013 ◽  
Vol 313-314 ◽  
pp. 232-236
Author(s):  
Dan Zhang
Keyword(s):  
Gold Nanoparticles ◽  
Catalytic Activity ◽  
Competitive Adsorption ◽  
Chemical Reduction ◽  
Reduction Process ◽  
Carbon Support ◽  
Transmission Electron ◽  
Supported Gold Nanoparticles ◽  
Supported Gold

Activated carbon supported gold nanoparticles (Au/C) were prepared by a chemical reduction process using NaBH4as a reducing agent. The characterization of transmission electron microscope indicated that the Au nanoparticles (AuNPs) in the Au/C catalyst were highly well dispersed on the carbon support. The catalytic activity of the Au/C catalyst for the methanol electrooxidation (MEO) was investigated by the cyclic voltammetry (CV). The results displayed that the Au/C catalyst exhibited a favorable catalytic activity towards the MEO in alkaline solution. Moreover, the competitive adsorption between OH-and CH3OH on the surface of the AuNPs in the Au/C catalyst existed in the course of the MEO. Based on this competitive adsorption, the mechanism of the MEO on the Au/C catalyst was further investigated.

Synthesis and characterization of Ag/PVA nanorods by chemical reduction method

2008 ◽  
Vol 40 (10) ◽  
pp. 3183-3186 ◽  
Author(s):  
M.A.S. Sadjadi ◽  
Babak Sadeghi ◽  
M. Meskinfam ◽  
K. Zare ◽  
J. Azizian
Keyword(s):  
Reduction Method ◽  
Chemical Reduction ◽  
Synthesis And Characterization ◽  
Chemical Reduction Method

The Synthesis and Characterization of Oxide Free Tin Nanoparticles

2014 ◽  
Vol 670-671 ◽  
pp. 26-29
Author(s):  
Zhi Long Pan ◽  
Shi Liang Ao ◽  
Jian Ping Jia
Keyword(s):  
Reduction Method ◽  
Chemical Reduction ◽  
Thermal Characterization ◽  
X Ray Diffraction ◽  
Chemical Reduction Method ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Xrd Study ◽  
Tin Nanoparticles

Oxide free Tin nanoparticles were synthesized from a chemical reduction method. Their morphological and thermal characterizations were studied in this paper. The X-ray diffraction (XRD) study showed that no oxides of Tin nanoparticles were formed. The thermal characterization by differential scanning calorimetry (DSC) exhibited the size dependency of the melting points. The melting point was as low as 202.16°C.

Preparation of Fe3O4-Coated Microsilica Composites via Chemical Reduction Method

2013 ◽  
Vol 750-752 ◽  
pp. 1071-1074
Author(s):  
Hui Xia Feng ◽  
Bai Yi Chen ◽  
De Yi Zhang ◽  
Jian Qiang Zhang ◽  
He Ming Luo
Keyword(s):  
Electron Microscope ◽  
Reduction Method ◽  
Chemical Reduction ◽  
Vibrating Sample Magnetometer ◽  
Chemical Reduction Method ◽  
Magnetic Composites ◽  
X Ray ◽  
The Core ◽  
Transmission Electron ◽  
Novel Method

Fe3O4-coated microsilica composites were synthesized by a novel method. The struction like precursor Fe3O4 nanoparticles as the shell and microsillica as the core for the composite has been prepared by chemical reduction method. The Fe3O4-coated microsilica composite presents a saturation magnetization value of 38.03 emu/g, which is sufficient to complete magnetic separation. The synthesized magnetic composites are characterized by X-ray diffractometer (XRD), transmission electron microscope (TEM) and vibrating sample magnetometer (VSM). The results indicated that Fe3O4 nanoparticles successfully coated on microsilica.

Sign in / Sign up

Export Citation Format

Share Document