scholarly journals Quantification of Tremolite in Friable Material Coming from Calabrian Ophiolitic Deposits by Infrared Spectroscopy

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Antonella Campopiano ◽  
Angelo Olori ◽  
Annapaola Cannizzaro ◽  
Antonino Iannò ◽  
Pietro Paolo Capone
Keyword(s):  
Infrared Spectroscopy ◽  
Quantitative Analysis ◽  
Absorption Band ◽  
Size Class ◽  
Medium Size ◽  
Friable Material ◽  
Large Size ◽  
Mineral Silicates ◽  
Ir Bands ◽  
Absorbance Band

The aim of this study is to identify the infrared absorption band suitable for quantifying tremolite in three powdered samples (fine, medium, and large size classes) coming from a quarry of ophiolitic friable rocks in the western part of the Calabria region of Italy. Three IR bands were considered: OH stretching band between 3700 and 3650 cm−1, the stretching bands of the Si-O-Si linkage between 1200 and 900 cm−1, and the absorbance band at 756 cm−1attributable to tremolite. The amount of tremolite in the test samples was quantified by using the curve parameters of the three analytical bands. The quantitative analysis of tremolite using the band due to OH stretchings (3700–3650 cm−1) and the bands attributed to the Si-O-Si stretchings (1200–900 cm−1) showed high values for all test samples. Their use overestimated the tremolite amount because both bands were affected at the interfering mineral silicates such as talc, kaolinite, chlorite, and serpentinites. The abundant presence of antigorite in studied samples mainly in medium size class sample had a key role in our findings. The band at 756 cm−1was not affected at the interfering minerals and can be used for quantitative analysis of tremolite in sample coming from ophiolitic deposits.

Diet, feeding behaviour and habitat utilisation of the blue stingray Dasyatis chrysonota (Smith, 1828) in South African waters

2003 ◽  
Vol 54 (8) ◽  
pp. 957 ◽  
Author(s):  
David A. Ebert ◽  
Paul D. Cowley
Keyword(s):  
Surf Zone ◽  
Stomach Contents ◽  
Size Class ◽  
Behaviour Pattern ◽  
Medium Size ◽  
Secondary Importance ◽  
Size Classes ◽  
Important Prey ◽  
Large Size ◽  
Large Size Class

Analysis of stomach contents for Dasyatis chrysonota revealed that diet varied with size and habitat. The diet of all size classes in the surf zone was comprised primarily of Callianassa spp., Donax spp. and unidentified polychaete species. The medium and large size classes fed primarily on Donax spp., whereas the very large size class fed mainly on Callianassa spp. Polychaetes were of secondary importance as prey for the medium size class. The diet of D. chrysonota in the nearshore zone consisted mainly of Balanoglossus capensis and Callianassa spp. Balanoglossus capensis decreased from an index of relative importance (IRI) of 75.3% for the medium size class to 59.9% for the very large size class, whereas Callianassa spp. increased from 22.8% to 39.4% between the medium and the very large size classes. The offshore zone was the only area in which small size class D. chrysonota were caught. The diet of these small D. chrysonota was primarily polychaetes and amphipods. Polychaetes increased in importance in the medium size class, but declined in each successively larger size class. Conversely, Pterygosquilla armata capensis became the single most important prey item for the very large size class, comprising an IRI of 50.9%. The behaviour pattern used by D. chrysonota to locate and extract prey is described.

scholarly journals SPATIAL VARIATION IN POPULATION CHARACTERISTICS OF VENUS CLAM GAFRARIUM TUMIDUM RÖDING, 1798 (BIVALVIA: VENERIDAE) IN AMBON BAY, MALUKU

2018 ◽  
Vol 43 (2) ◽  
pp. 63-70
Author(s):  
Muhammad Masrur Islami ◽  
Dietriech Geoffrey Bengen ◽  
Safar Dody
Keyword(s):  
Spatial Distribution ◽  
Spatial Variation ◽  
Size Class ◽  
Population Characteristics ◽  
Medium Size ◽  
Shell Width ◽  
Discriminating Power ◽  
Large Size ◽  
Different Populations ◽  
Potential Factors

Ambon Bay consists of two regions i.e. Inner and Outer Ambon Bay that was separated by Galala-Poka sill. Consequently these waters have different local environmental conditions that leads to the bivalve populations differences, one of them is venus clam Gafrarium tumidum. In this study, the distribution and spatial variation in population characteristics of of venus clam was quantified based on the analysis of their twelve shell dimensions from different populations. Fieldwork and analyses were conducted on April – Juni 2013. Total of 585 individuals of venus clam were found and could be divided into ten size-classes and three size categories i.e. small (< 23.11 mm), medium (23.12–32.05 mm) and large size (> 32.06 mm). The highest size-class density was found at medium size. Spatial distribution was related to the characteristics of sediment and other potential factors. Result of discriminant analysis showed that shell-width (SW) was the variable with the highest discriminating power and distinguishing between Inner and Outer Ambon Bay populations.

Infrared Study of Styrene-4-Methylstyrene Copolymers

1989 ◽  
Vol 43 (3) ◽  
pp. 442-444 ◽  
Author(s):  
R. A. Nyquist ◽  
M. Malanga
Keyword(s):  
Infrared Spectroscopy ◽  
High Temperature ◽  
Quantitative Analysis ◽  
Low Temperature ◽  
Absorption Band ◽  
Weight Percent ◽  
Crystalline Form ◽  
Syndiotactic Polystyrene ◽  
Infrared Study ◽  
Absorption Band Intensity

Two types of crystalline syndiotactic polystyrene units are observed in these styrene- p-methylstyrene copolymers. The low-temperature crystalline form is observed in copolymers containing 2 weight percent or less 4-methylstyrene, and the high-temperature crystalline form is observed in copolymers containing 3 to 7 weight percent 4-methylstyrene. Quantitative analysis of styrene-4-methylstyrene copolymers can be performed with the use of infrared spectroscopy and an infrared absorption band intensity ratio technique.

First Nano-Infrared Spectroscopy and Imaging Measurements of Single Phospholipid Bilayers

2018 ◽  
Author(s):  
Adrian Cernescu ◽  
Michał Szuwarzyński ◽  
Urszula Kwolek ◽  
Karol Wolski ◽  
Paweł Wydro ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Ir Spectroscopy ◽  
Absorption Band ◽  
Spectral Region ◽  
Near Field ◽  
Phospholipid Bilayers ◽  
Model Systems ◽  
Absorption Bands ◽  
Protein Complement ◽  
20 Nm

<div><div>Scattering-mode Scanning Near-Field Optical Microscopy (sSNOM) allows one to obtain absorption spectra in the mid-IR region for samples as small as 20 nm in size. This configuration has made it possible to measure FTIR spectra of the protein complement of membranes. (Amenabar 2013) We now show that mid-IR sSNOM has the sensitivity required to measure spectra of phospholipids in individual bilayers in the spectral range 800 cm<sup>-1</sup>–1400 cm<sup>-1</sup>. We have observed the main absorption bands of the dipalmitoylphosphatidylcholine headgroups in this spectral region above noise level. We have also mapped the phosphate absorption band at 1070 cm<sup>-1</sup> simultaneously with the AFM topography. We have shown that we could achieve sufficient contrast to discriminate between single and multiple phospholipid bilayers and other structures, such as liposomes. This work opens the way to further research that uses nano-IR spectroscopy to describe the biochemistry of cell membranes and model systems.</div></div><div></div>

AISI TYPE S2

Alloy Digest ◽  
1982 ◽  
Vol 31 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Shock Loading ◽  
Heat Treating ◽  
Medium Size ◽  
Hard Case ◽  
Large Size ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type S2 is a water-hardening tool steel with extreme toughness and resistance to shock loading. Even at a hardness of Rockwell C 59-60, it will bend before it breaks. When hardened in medium-size and large-size pieces, it acquires a hard case and a tough core. Sizes under 3/4-inch (19mm) diameter will water harden to the center. The extreme toughness of Type S2 makes it suitable for use in many applications where no other tool steel will hold up. Its many uses include chisels, rivet busters, spike mauls, screw drivers, punches and sledges. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-408. Producer or source: Tool steel mills.

Screening of F1 progeny for selection of superior hybrids in mulberry (Morus spp.) - A simple approach PART I: Screening of seedlings in relation to seed size

2017 ◽  
Vol 6 (2) ◽  
pp. 5256
Author(s):  
Daryoush Shafiei ◽  
Prof. Basavaiah*
Keyword(s):  
Seed Size ◽  
Seedling Survival ◽  
Size Class ◽  
Medium Size ◽  
Screening Process ◽  
Size Classes ◽  
Morus Spp ◽  
In The Beginning ◽  
Selection Of ◽  
Size Grading

In mulberry (Morus spp.), the process of selection of promising hybrids from F1 population requires the screening of a large number of progenies and a long period. To develop a simple and faster approach for screening, studies were conducted using F1 seeds of two crosses. The details of screening studies conducted in relation to seed-size and seedling-size are reported separately in two parts. In this part, the F1 seeds were size-graded as small, medium and large seeds; their progenies were raised separately and screened in nursery. There was a considerable degree of variation in size of seeds and medium-size class seeds were in high percentage in both the crosses. The length, width and weight of seeds were also varied between the seed size classes significantly in both the crosses. The seed size classes differ with high significance in shoot length and Root collar diameter and also differ significantly in root length and weight of seedlings. The positive correlation between the seed size and growth of seedlings, seed size and germination, seed size and seedling survival in nursery indicated that size-grading of seeds and rejection of small seeds in the beginning of screening process may help to increase the efficiency of screening by increasing the chances of getting superior hybrids from limited progenies. However, confirmation on the performance of large seedlings from small seed size class may help to draw conclusion. Hence, the studies are continued with size- grading of seedlings in the next part of screening study.

scholarly journals Exercise Intensity and Technical Involvement in U9 Team Handball: Effect of Game Format

2021 ◽  
Vol 18 (11) ◽  
pp. 5663
Author(s):  
Georgios Ermidis ◽  
Rasmus C. Ellegard ◽  
Vincenzo Rago ◽  
Morten B. Randers ◽  
Peter Krustrup ◽  
...  
Keyword(s):  
Heart Rate ◽  
Locomotor Activity ◽  
Exercise Intensity ◽  
High Intensity ◽  
High Speed ◽  
Medium Size ◽  
Total Distance ◽  
Team Handball ◽  
Large Size ◽  
Game Format

The purpose of this study was to quantify the exercise intensity and technical involvement of U9 boys’ and girls’ team handball during different game formats, and the differences between genders. Locomotor activity (total distance, distance in speed zones, accelerations, and decelerations), heart rate (HR), and technical involvement (shots, goals, and duels) metrics were collected during various 15 min game formats from a total of 57 Danish U9 players (37 boys and 20 girls). Game formats were a small size pitch (20 × 13 m) with 3 vs 3 players and offensive goalkeepers (S3 + 1) and 4 vs 4 players (S4), a medium size pitch (25.8 × 20 m) with 4 vs 4 (M4) and 5 vs 5 (M5) players, and a large size pitch (40 × 20 m) with 5 vs 5 (L5) players. Boys and girls covered a higher total distance (TD) of high-speed running (HSR) and sprinting during L5 games compared to all other game formats (p < 0.05; ES = (−0.9 to −2.1), (−1.4 to −2.8), and (−0.9 to −1.3) respectively). Players covered the highest amount of sprinting distance in L5 games compared to all other game formats (p < 0.01; ES = 0.8 to 1.4). In all the game formats, players spent from 3.04 to 5.96 min in 180–200 bpm and 0.03 min to 0.85 min in >200 bpm of the total 15 min. In addition, both genders had more shots in S3 + 1 than M5 (p < 0.01; ES = 1.0 (0.4;1.7)) and L5 (p < 0.01; ES = 1.1 (0.6;2.2)). Team handball matches have high heart rates, total distances covered, and high-intensity running distances for U9 boys and girls irrespective of the game format. Locomotor demands appeared to be even higher when playing on larger pitches, whereas the smaller pitch size and fewer players led to elevated technical involvement.

Sign in / Sign up

Export Citation Format

Share Document