scholarly journals Design and Analysis of a Novel 25 GHz Interleaver for DWDM Applications with Two Ring Configurations

2015 ◽  
Vol 2015 ◽  
pp. 1-7
Author(s):  
Tsair-Chun Liang ◽  
Chun-Ting Chen

We present a novel scheme of an excellent flat-top 25 GHz optical interleaver based on two ring configurations. And the Advanced Systems Analysis Program (ASAP) optical modeling software has been utilized for the interleaver design. The optical path difference for interference and the phase shift are provided by the interferometer with two birefringent crystals and dual-ring arrangement. The proposed structure exhibits the passband utilization of more than 90% and the channel isolation greater than 95 dB within the C-band. Furthermore, we improve the dispersion performance by employingλ/6 wave plates as birefringent compensators for interleavers. The research results illustrate that our proposed scheme with compensator can improve the dispersion of more than 85.8%. Comparing the performance with the previous studies of optical interleavers with birefringent crystal and ring structure, the proposed system can achieve an excellent 25 GHz multichannel filter for dense wavelength division multiplexing (DWDM) transmission systems.

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Tsair-Chun Liang ◽  
Chun-Ting Chen

We theoretically investigate a 25 GHz multichannel filter based on ring cavity birefringent optical interleaver for dense wavelength division multiplexing (DWDM) transmission systems. The simulation tool used in this work is the Advanced System Analysis Program (ASAP) optical modeling software. We improve the dispersion performance by employingλ/6 andλ/4 wave plates as birefringent compensators for interleavers. The new structure exhibits a high performance with nearly zero ripple, a channel isolation greater than 102 dB, and a passband utilization of 86% within the C-band. The research results illustrate that our modified scheme can improve the dispersion of more than 76.6% in comparison with the previous studies of optical interleaver with birefringent crystal and ring cavity structures.


Author(s):  
BHADRA ANAMIKA ◽  
SAHU VIKAS ◽  
SHRIVASTAVA SHARAD MOHAN ◽  
ANSHU ◽  
SANGHVI ANJALI S. ◽  
...  

Crystals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 19
Author(s):  
Sergei N. Smetanin ◽  
Michal Jelínek ◽  
Dmitry P. Tereshchenko ◽  
Mikhail N. Ershkov ◽  
Václav Kubeček

We propose and study the conditions of zero-dispersion phase matching for parametric Raman interactions in birefringent crystals differing by anisotropy of zero-dispersion wavelength and allowing for the spectral tuning of the zero-dispersion phase-matching condition. We choose a highly birefringent crystal of calcite having a wide zero-dispersion anisotropy range for the demonstration of new effects of laser pulse shortening in parametric Raman lasers with spectrally tunable zero-dispersion phase matching. We demonstrate the anti-Stokes (1168 nm) and multi-Stokes (1629 nm) picosecond pulse shortening and self-separation of single 80-ps ultra-short pulse from the zero-dispersion phase-matched parametric Raman lasers that are based on the calcite crystal without using any electro-optical device.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Georg Rademacher ◽  
Benjamin J. Puttnam ◽  
Ruben S. Luís ◽  
Tobias A. Eriksson ◽  
Nicolas K. Fontaine ◽  
...  

AbstractData rates in optical fiber networks have increased exponentially over the past decades and core-networks are expected to operate in the peta-bit-per-second regime by 2030. As current single-mode fiber-based transmission systems are reaching their capacity limits, space-division multiplexing has been investigated as a means to increase the per-fiber capacity. Of all space-division multiplexing fibers proposed to date, multi-mode fibers have the highest spatial channel density, as signals traveling in orthogonal fiber modes share the same fiber-core. By combining a high mode-count multi-mode fiber with wideband wavelength-division multiplexing, we report a peta-bit-per-second class transmission demonstration in multi-mode fibers. This was enabled by combining three key technologies: a wideband optical comb-based transmitter to generate highly spectral efficient 64-quadrature-amplitude modulated signals between 1528 nm and 1610 nm wavelength, a broadband mode-multiplexer, based on multi-plane light conversion, and a 15-mode multi-mode fiber with optimized transmission characteristics for wideband operation.


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Anurupa Lubana ◽  
Sanmukh Kaur ◽  
Yugnanda Malhotra

AbstractIn this work, we study and analyze the performance of Raman + Erbium-Ytterbium codoped fiber hybrid optical amplifier (HOA) for an ultradense wavelength division multiplexing (UD-WDM) system having 100 channels. The system has been investigated considering initial values of channel spacing and data rate of 0.1 nm (12.5 GHz) and 100 GB/s, respectively. Initially, the two important WDM system parameters—wavelength and channel spacing—have been selected and then optimization of the proposed HOA has been performed in terms of EYDFA length, pump power and Er+ concentration to achieve higher values of average gain, Q-factor and lower gain variation ratio. The optimized configuration of the HOA results in the achievement of higher value of average gain, Q-factor and gain variation ratio of 47 dB, 14 and 0.14, respectively, which confirms its viability for UD-WDM system applications.


Sign in / Sign up

Export Citation Format

Share Document