scholarly journals Efficient Degradation of Methylene Blue over Two-Dimensional Au/TiO2Nanosheet Films with Overlapped Light Harvesting Nanostructures

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Yihan Chen ◽  
Juanjuan Bian ◽  
Lulu Qi ◽  
Enzhou Liu ◽  
Jun Fan

Two-dimensional TiO2nanosheet films with visible light trapping nanostructures were successfully fabricated by alkali hydrothermal reaction using Ti sheet as precursor. Metallic Au nanoparticles (NPs) were then deposited on the surface of TiO2film through a microwave-assisted reduction process. The investigations reveal that the localized surface plasmon resonance (LSPR) of Au NPs is greatly enhanced by the overlapped light harvesting nanostructures between TiO2film and Au NPs, resulting in an enhanced LSPR-absorption with two peaks at 389 nm and 540 nm. The photocatalytic performance of the samples was evaluated by degradation of methylene blue (MB) as a model pollutant. The experimental results indicate that the photocatalytic performance of TiO2is greatly promoted by a synergetic effect between the overlapped light harvesting nanostructures and the improved charge carrier separation processes. The MB degradation over the optimal sample is much faster than that of pure TiO2film by a factor of 3.0 and 5.7 under UV light and UV + visible light irradiation, respectively. This study provides a simple strategy to develop film-shaped plasmonic photocatalysts with high efficiency.

2014 ◽  
Vol 16 (26) ◽  
pp. 13409-13417 ◽  
Author(s):  
Chao Liu ◽  
Liang Wu ◽  
Jing Chen ◽  
Ji-yuan Liang ◽  
Chang-shun Li ◽  
...  

N-doping and intercalation resulted in a PANI–N-HTiNbO5lamellar nanocomposite, which showed a dramatic enhanced visible-light photocatalytic activity and stability for the degradation of methylene blue (MB), due to the high efficiency of charge separation.


RSC Advances ◽  
2021 ◽  
Vol 11 (30) ◽  
pp. 18519-18524
Author(s):  
Haicheng Li ◽  
Linlin Zang ◽  
Fengtong Shen ◽  
Libin Wang ◽  
Liguo Sun ◽  
...  

Tubular g-C3N4 grown on a carbon framework increased the surface area of bulk g-C3N4, enhanced the absorption of visible light and promoted the photocatalytic performance.


2019 ◽  
Vol 8 (1) ◽  
pp. 56-61
Author(s):  
Aneeya K. Samantara ◽  
Debasrita Dash ◽  
Dipti L. Bhuyan ◽  
Namita Dalai ◽  
Bijayalaxmi Jena

: In this article, we explored the possibility of controlling the reactivity of ZnO nanostructures by modifying its surface with gold nanoparticles (Au NPs). By varying the concentration of Au with different wt% (x = 0.01, 0.05, 0.08, 1 and 2), we have synthesized a series of (ZnO/Aux) nanocomposites (NCs). A thorough investigation of the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface has been carried out. It was observed that ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity among all concentrations of Au on the ZnO surface, which degrades the dye concentration within 2 minutes of visible light exposure. It was further revealed that with an increase in the size of plasmonic nanoparticles beyond 0.08%, the accessible surface area of the Au nanoparticle decreases. The photon absorption capacity of Au nanoparticle decreases beyond 0.08% resulting in a decrease in electron transfer rate from Au to ZnO and a decrease of photocatalytic activity. Background: Due to the industrialization process, most of the toxic materials go into the water bodies, affecting the water and our ecological system. The conventional techniques to remove dyes are expensive and inefficient. Recently, heterogeneous semiconductor materials like TiO2 and ZnO have been regarded as potential candidates for the removal of dye from the water system. Objective: To investigate the photocatalytic performance of different wt% of Au NPs on ZnO nanosurface and the effect of the size of Au NPs for photocatalytic performance in the degradation process. Methods: A facile microwave method has been adopted for the synthesis of ZnO nanostructure followed by a reduction of gold salt in the presence of ZnO nanostructure to form the composite. Results: ZnO/Au0.08 nanocomposite showed the highest photocatalytic activity which degrades the dye concentration within 2 minutes of visible light exposure. The schematic mechanism of electron transfer rate was discussed. Conclusion: Raspberry shaped ZnO nanoparticles modified with different percentages of Au NPs showed good photocatalytic behavior in the degradation of dye molecules. The synergetic effect of unique morphology of ZnO and well anchored Au nanostructures plays a crucial role.


2014 ◽  
Vol 608 ◽  
pp. 224-229 ◽  
Author(s):  
Potjanaporn Chaengchawi ◽  
Karn Serivalsatit ◽  
Pornapa Sujaridworakun

A visible-light responsive CdS/ZnO nanocomposite photocatalyst was successfully synthesized by precipitation of CdS nanoparticles, using Cd (NO3)2 and Na2S as starting materials, on ZnO nanoparticles and then calcined at 400°C for 2 hours. The effects of the mole ratio of CdS and ZnO in the composites on their phase, morphology, and surface area were investigated by X-ray Diffraction (XRD), scanning electron microscope (SEM), Brunauer Emmett Teller method (BET), respectively. The photocatalytic degradation of methylene blue solution in the presence of composite products under visible-light irradiation was investigated. The results showed that the mole ratio of CdS and ZnO played a significant role on photocatalytic performance. The highest photocatalytic activity was obtained from the CdS/ZnO nanocomposite with mole ratio of 1:4, which is higher than that of pure CdS and pure ZnO.


2018 ◽  
Vol 42 (13) ◽  
pp. 11109-11116 ◽  
Author(s):  
R. Salimi ◽  
A. A. Sabbagh Alvani ◽  
N. Naseri ◽  
S. F. Du ◽  
D. Poelman

A new plasmonic Ag hybridized CuWO4/WO3 heterostructured nanocomposite was successfully synthesized via a ligand-assisted sol gel method and the photocatalytic activity was evaluated by photo-degradation of methylene blue (MB) under visible light irradiation.


RSC Advances ◽  
2017 ◽  
Vol 7 (41) ◽  
pp. 25314-25324 ◽  
Author(s):  
Lin Xiao ◽  
Li Youji ◽  
Chen Feitai ◽  
Xu Peng ◽  
Li Ming

A highly efficient and elaborately structured visible-light-driven catalyst composed of mesoporous TiO2 (MT) doped with Ag+-coated graphene (MT-Ag/GR) has been successfully fabricated by a sol–gel and solvothermal method.


Sign in / Sign up

Export Citation Format

Share Document