scholarly journals Design and Performance Analysis of 1-Bit FinFET Full Adder Cells for Subthreshold Region at 16 nm Process Technology

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
‘Aqilah binti Abdul Tahrim ◽  
Huei Chaeng Chin ◽  
Cheng Siong Lim ◽  
Michael Loong Peng Tan
Keyword(s):  
High Speed ◽  
Average Power ◽  
Full Adder ◽  
Propagation Delay ◽  
Oxide Semiconductor ◽  
Process Technology ◽  
Subthreshold Region ◽  
And Performance ◽  
Power Delay Product ◽  
20 Nm

The scaling process of the conventional 2D-planar metal-oxide semiconductor field-effect transistor (MOSFET) is now approaching its limit as technology has reached below 20 nm process technology. A new nonplanar device architecture called FinFET was invented to overcome the problem by allowing transistors to be scaled down into sub-20 nm region. In this work, the FinFET structure is implemented in 1-bit full adder transistors to investigate its performance and energy efficiency in the subthreshold region for cell designs of Complementary MOS (CMOS), Complementary Pass-Transistor Logic (CPL), Transmission Gate (TG), and Hybrid CMOS (HCMOS). The performance of 1-bit FinFET-based full adder in 16-nm technology is benchmarked against conventional MOSFET-based full adder. The Predictive Technology Model (PTM) and Berkeley Shortchannel IGFET Model-Common Multi-Gate (BSIM-CMG) 16 nm low power libraries are used. Propagation delay, average power dissipation, power-delay-product (PDP), and energy-delay-product (EDP) are analysed based on all four types of full adder cell designs of both FETs. The 1-bit FinFET-based full adder shows a great reduction in all four metric performances. A reduction in propagation delay, PDP, and EDP is evident in the 1-bit FinFET-based full adder of CPL, giving the best overall performance due to its high-speed performance and good current driving capabilities.

scholarly journals Performance Analysis of a Low Power High Speed Hybrid Full Adder Circuit and Full Subtractor Circuit

2021 ◽  
Vol 12 (3) ◽  
pp. 3037-3045
Author(s):  
M. Naga Gowtham Et.al
Keyword(s):  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Transmission Gate ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper, a hybrid 1-bit adder and 1-bit Subtractor designs are implemented. The hybrid adder circuit is constructed using CMOS (complementary metal oxide semiconductor) logic along with pass transistor logic. The design can be extended 16 and 32 bits lately. The proposed full adder circuit is compared with the existing conventional adders in terms of power, delay and area in order to obtain a better circuit that serves the present day needs of people. The existing 1-bit hybrid adder uses EXNOR logic combined with the transmission gate logic. For a supply voltage of 1.8V the average power consumption (4.1563 µW) which is extremely low with moderately low delay (224 ps) resulting because of the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. At 1.2V supply the power and delay were recorded to be 1.17664 µW and 91.3 ps. The design was implemented using 1-bit which can also be extended into a 32-bit design later. The designed implementation offers a better performance in terms of power and speed compared to the existing full adder design styles. The circuits were implemented in DSCH2 and Microwind tools respectively. The parameters such as power, delay, layout area and speed of the proposed circuit design is compared with pass transistor logic, adiabatic logic, transmission gate adder and so on. The circuit is also designed with a decrease in transistors in order to get the better results. Full Subtractor, a combinational digital circuit which performs 1-bit subtraction with borrow in is designed as a part of this project. The main aim behind this part of the project is to design a 1-bit full Subtractor using CMOS technology with reduced number of transistors and hence the efficiency in terms of area, power and speed have been calculated is designed using 8,10,15and 16 transistors. The parameters were calculated in each case and the results have been tabulated.

scholarly journals Performance Analysis of a Low Power High Speed Hybrid Full Adder Circuit and Full Subtractor Circuit

2021 ◽  
Vol 12 (5) ◽  
pp. 92-100
Author(s):  
M. Naga Gowtham, P.S Hari Krishna Reddy, K Jeevitha, K Hari Kishore, E Raghuveera, Shaik Razia
Keyword(s):  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Full Adder ◽  
Digital Circuit ◽  
Oxide Semiconductor ◽  
Transmission Gate ◽  
Average Power Consumption ◽  
Pass Transistor ◽  
Pass Transistor Logic

In this paper, a hybrid 1-bit adder and 1-bit Subtractor designs are implemented. The hybrid adder circuit is constructed using CMOS (complementary metal oxide semiconductor) logic along with pass transistor logic. The design can be extended 16 and 32 bits lately. The proposed full adder circuit is compared with the existing conventional adders in terms of power, delay and area in order to obtain a better circuit that serves the present day needs of people. The existing 1-bit hybrid adder uses EXNOR logic combined with the transmission gate logic. For a supply voltage of 1.8V the average power consumption (4.1563 µW) which is extremely low with moderately low delay (224 ps) resulting because of the deliberate incorporation of very weak CMOS inverters coupled with strong transmission gates. At 1.2V supply the power and delay were recorded to be 1.17664 µW and 91.3 ps. The design was implemented using 1-bit which can also be extended into a 32-bit design later. The designed implementation offers a better performance in terms of power and speed compared to the existing full adder design styles. The circuits were implemented in DSCH2 and Microwind tools respectively. The parameters such as power, delay, layout area and speed of the proposed circuit design is compared with pass transistor logic, adiabatic logic, transmission gate adder and so on. The circuit is also designed with a decrease in transistors in order to get the better results. Full Subtractor, a combinational digital circuit which performs 1-bit subtraction with borrow in is designed as a part of this project. The main aim behind this part of the project is to design a 1-bit full Subtractor using CMOS technology with reduced number of transistors and hence the efficiency in terms of area, power and speed have been calculated is designed using 8,10,15and 16 transistors. The parameters were calculated in each case and the results have been tabulated.

A 4:1 multiplexer using low-power high-speed domino technique for large fan-in gates using FinFET

Circuit World ◽  
2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sandeep Garg ◽  
Tarun Kumar Gupta
Keyword(s):  
Low Power ◽  
High Speed ◽  
Supply Voltage ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Propagation Delay ◽  
Oxide Semiconductor ◽  
Content Type ◽  
Maximum Delay ◽  
Average Power Consumption

Purpose This paper aims to propose a new fin field-effect transistor (FinFET)-based domino technique low-power series connected foot-driven transistors logic in 32 nm technology and examine its performance parameters by performing transient analysis. Design/methodology/approach In the proposed technique, the leakage current is reduced at footer node by a division of current to improve the performance of the circuit in terms of average power consumption, propagation delay and noise margin. Simulation of existing and proposed techniques are carried out in FinFET and complementary metal-oxide semiconductor technology at FinFET 32 nm technology for 2-, 4-, 8- and 16-input domino OR gates on a supply voltage of 0.9 V using HSPICE. Findings The proposed technique shows maximum power reduction of 77.74% in FinFET short gate (SG) mode in comparison with current-mirror-based process variation tolerant (CPVT) technique and maximum delay reduction of 51.34% in low power (LP) mode in comparison with CPVT technique at a frequency of 100 MHz. The unity noise gain of the proposed circuit is 1.10× to 1.54× higher in comparison with different existing techniques in FinFET SG mode and 1.11× to 1.71× higher in FinFET LP mode. The figure of merit of the proposed circuit is up to 15.77× higher in comparison with existing domino techniques. Originality/value The research proposes a new FinFET-based domino technique and shows improvement in power, delay, area and noise performance. The proposed design can be used for implementing high-speed digital circuits such as microprocessors and memories.

scholarly journals Design and Performance Analysis of Low Power High Speed 4x4 CNTFET Binary Content Addressable Memory Array

2019 ◽  
Vol 9 (1) ◽  
pp. 5962-5965
Keyword(s):  
Performance Analysis ◽  
Low Power ◽  
High Speed ◽  
Peak Power ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Content Addressable Memory ◽  
Power Peak ◽  
And Performance

In this paper, Carbon Nanotube Field Effect Transistor (CNTFET) based Binary Content Addressable Memory (BCAM) array is presented. The CAM array comprises of address decoders, encoders, data drivers and BCAM cells. Performance analysis is carried for 4X4 BCAM array. Each BCAM cell is designed based on adiabatic logic with optimum CNTFET parameter for low power and high speed applications. The performance of proposed BCAM array is analyzed for average power, peak power and search delay. The proposed CNTFET based BCAM array show improvement in the performance compared to that of complementary metal oxide semiconductor (CMOS) based BCAM array. The average power and peak power of the proposed 4x4 CNTFET BCAM array are in the range of micro watt (µW) while it is in the range of milli watt (mW) for CMOS based BCAM array. The search delay of the proposed 4X4 CNTFET BCAM array is improved by 32.3% compared to that of CMOS based BCAM array. All simulations are conducted for both CNTFET and CMOS based BCAM cells, BCAM array in HSPICE at 32 nm technology.

scholarly journals The Mixed Logic Style based Low Power and High Speed 3-2 Compressor for ASIC designs at 32nm Technology

2019 ◽  
Vol 9 (1) ◽  
pp. 43-49
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Building Blocks ◽  
Propagation Delay ◽  
Oxide Semiconductor ◽  
Logic Design ◽  
Average Power Consumption

Compressors are the fundamental building blocks to construct Data Processing arithmetic units. A novel 3-2 Compressor is presented in this paper which is designed by Mixed logic design style. In addition to small size transistors and reduced transistor activity compared to conventional CMOS (Complementary Metal Oxide Semiconductor) gates, it provides the priority between the High logic and Low logic for the computation of the output. Various logic topologies are used to design the 3-2 compressor like High-Skew(Hi-Skew), Low-Skew(Li-Skew), TGL (Transmission Gate Logic) and DVL (Dual value Logic). This new approach gives the better operating speed, low power consumption compared to conventional logic design by reducing the transistors activity, improving the driving capability and reduced input capacitance with skew gates. Especially the Mixed logic style-3 provides 92.39% average power consumption and Propagation Delay of 99.59% at 0.8v. The H-SPICE simulation tool is used for construction and evaluation of compressor logic at different voltages. 32nm model file is used for MOS transistors

scholarly journals Design of New High-Performance Full Adder Using Hybrid-CMOS Logic Style for High-Speed Applications

2015 ◽  
Vol 37 ◽  
pp. 285 ◽  
Author(s):  
Milad Jalalian Abbasi Morad ◽  
Seyyed Reza Talebiyan ◽  
Ebrahim Pakniyat
Keyword(s):  
Power Supply ◽  
High Speed ◽  
High Performance ◽  
Full Adder ◽  
Propagation Delay ◽  
Novel Structure ◽  
Hybrid Cmos ◽  
Simulation Results ◽  
Power Delay Product

This paper, presents a new design for 1-bit full adder cell using hybrid-CMOS logic style. Using a novel structure for implementation of the proposed full adder caused it has better performance in terms of propagation delay and power-delay product (PDP) compared to its counterparts. According to the simulation results, the propagation delay of the proposed full adder is 22.8% less than the propagation delay of next fastest full adder, and the power-delay product of the proposed full adder is 22.7% less than the next best PDP. HSpice simulations using 65nm technology with a power supply of 1.2V was utilized to evaluate the performance of the circuits.

Design of implicit pulsed-dual edge triggering flip flop for low power and high speed clocking systems

2019 ◽  
Vol 18 (01) ◽  
pp. 1941009
Author(s):  
P. Nagarajan ◽  
N. Ashok Kumar ◽  
P. Venkat Ramana
Keyword(s):  
Power Dissipation ◽  
High Speed ◽  
Power Saving ◽  
Complementary Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Process Technology ◽  
Flip Flop ◽  
Energy Product ◽  
Power Delay Product ◽  
And Storage

The flip-flops are considered as major contributors to the power dissipation of the clocking system, which is made up of the clock provision network and storage elements (latches, flip-flops). The power- and delay-efficient new implicit-pulsed dual-edge triggering flip-flop circuit (IP-DETFF) is proposed with two latching stages by employing an implicit-pulse triggering, dual-edge clocking and reducing the number of clocked loads. This leads to the reduction of power consumption due to clock allocation tree (pclk-tree) and reduces the delay time. The dual-edge clocking technique is incorporated into this proposed design without an increment of the number of transistors and minimizes the operating frequency as half. This methodology is also employed in this proposed design to construct new latching part of the flip-flop circuit. The performance of proposed flip-flop is analyzed by simulating the circuit at 0.12[Formula: see text][Formula: see text]m CMOS (complementary metal oxide semiconductor) process technology. The simulation results show that the proposed design achieves power saving from 11.22% to 54.81%, improvement of speed from 67% to 71.50%, power-delay product (PDP) from 74.85% to 81.26 %, energy-delay product (EDP) from 87.86% to 92.4% and power-energy product (PEP) from 75.24% to 93.57% compared to the conventional flip-flops.

scholarly journals Design and Analysis of Low-Power and High Speed Approximate Adders Using CNFETs

Sensors ◽  
2021 ◽  
Vol 21 (24) ◽  
pp. 8203
Author(s):  
Avireni Bhargav ◽  
Phat Huynh
Keyword(s):  
Low Power ◽  
High Speed ◽  
High Performance ◽  
Supply Voltage ◽  
Average Power ◽  
Propagation Delay ◽  
Approximate Computing ◽  
Effect Transistor ◽  
Developing Area ◽  
Power Delay Product

Adders are constituted as the fundamental blocks of arithmetic circuits and are considered important for computation devices. Approximate computing has become a popular and developing area, promising to provide energy-efficient circuits with low power and high performance. In this paper, 10T approximate adder (AA) and 13T approximate adder (AA) designs using carbon nanotube field-effect transistor (CNFET) technology are presented. The simulation for the proposed 10T approximate adder and 13T approximate adder designs were carried out using the HSPICE tool with 32 nm CNFET technology. The metrics, such as average power, power-delay product (PDP), energy delay product (EDP) and propagation delay, were carried out through the HSPICE tool and compared to the existing circuit designs. The supply voltage Vdd provided for the proposed circuit designs was 0.9 V. The results indicated that among the existing full adders and approximate adders found in the review of adders, the proposed circuits consumed less PDP and minimum power with more accuracy.

ANALYSIS OF A NOVEL FULL ADDER DESIGNED FOR IMPLEMENTING IN CARBONE NANOTUBE TECHNOLOGY

2012 ◽  
Vol 21 (05) ◽  
pp. 1250042 ◽  
Author(s):  
MAHDIAR GHADIRY ◽  
MAHDIEH NADI ◽  
HOSEIN MOHAMMADI ◽  
ASRULNIZAM BIN ABD MANAF
Keyword(s):  
Low Power ◽  
High Speed ◽  
Full Adder ◽  
Ultra Low Power ◽  
New Approach ◽  
And Performance ◽  
Carbon Nanotube Technology ◽  
Power Delay Product ◽  
Full Swing ◽  
Very High

A novel low power-delay product full adder circuit is presented in this paper. A new approach is used in order to design full-swing full adder with low number of transistors. The proposed full adder is implemented in MOSFET-like Carbon nanotube technology and the layout is provided based on standard 32 nm technology from MOSIS. The simulation results using HSPICE show that, there are substantial improvements in both power and performance of the proposed circuit compared to latest designs. In addition, the proposed circuit has been implemented in conventional 32 nm process to estimate the advantages of using carbon-based transistors in digital designs over conventional silicon technology. The proposed circuit can be applied in ultra low power and very high speed applications.

scholarly journals The Mixed Logic Style based Low Power and High Speed One-bit Binary adder for SOI Designs AT 32NM Technology

2019 ◽  
Vol 8 (4) ◽  
pp. 361-366
Keyword(s):  
Power Consumption ◽  
Low Power ◽  
High Speed ◽  
Average Power ◽  
Complementary Metal Oxide Semiconductor ◽  
Building Blocks ◽  
Full Adder ◽  
Oxide Semiconductor ◽  
Logic Design ◽  
Average Power Consumption

Binary adders are the fundamental building blocks to construct Data Processing arithmetic units. A novel one-bit full adder is presented in this paper which is designed by Mixed logic design style. In addition to small size transistors and reduced transistor activity compared to conventional CMOS (Complementary Metal Oxide Semiconductor) gates, it provides the priority between the High logic and Low logic for the computation of the output. Various logic topologies are used to design the one-bit full adder like High-Skew(Hi-Skew), Low-Skew(Li-Skew), TGL (Transmission Gate Logic) and DVL (Dual Voltage Logic). This new approach gives the better operating speed, low power consumption compared to conventional logic design by reducing the transistors activity and by improving the driving capability. This Mixed logic style provides 83.53% average power consumption and Propagation Delay of 14.02% at 0.8v. The H-SPICE simulation tool is used for construction and evaluation of the Full adder logic at different voltages. The 32nm model file is used for MOS transistors

Sign in / Sign up

Export Citation Format

Share Document