scholarly journals Preparation and Photocatalytic Activity of TiO2/Fine Char for Removal of Rhodamine B

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Mingjie Ma ◽  
Weijie Guo ◽  
Zhengpeng Yang ◽  
Shanxiu Huang ◽  
Guanyu Wang
Keyword(s):  
Photocatalytic Activity ◽  
Photocatalytic Degradation ◽  
Rhodamine B ◽  
Uv Light ◽  
Sol Gel ◽  
Tetrabutyl Titanate ◽  
Light Illumination ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation

TiO2/fine char (FC) photocatalyst was prepared via sol-gel method with tetrabutyl titanate as the precursor and FC as the carrier. The structural property of TiO2/FC photocatalyst was investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM), and the photocatalytic activity of TiO2/FC was evaluated by photocatalytic degradation of rhodamine B (RhB) aqueous solution under UV light irradiation. The results showed that TiO2was successfully coated on the surface of FC, and the TiO2/FC photocatalyst had better photocatalytic efficiency and stability for degradation of RhB under UV light illumination as compared to that of the pure TiO2and FC. The study provided a novel way for the application of FC to the photocatalytic degradation of organic wastes.

Effect of Fe Incorporation on the Photocatalytic Activity of TiO2 by Sol-Gel Method

2015 ◽  
Vol 1087 ◽  
pp. 218-222
Author(s):  
Siti Aida Ibrahim ◽  
Srimala Sreekantan
Keyword(s):  
Photocatalytic Activity ◽  
Uv Light ◽  
Sol Gel ◽  
Combination Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Vis Spectroscopy ◽  
Visible Irradiation ◽  
Emission Microscopy

Nanostructured Fe-TiO2 and TiO2 with anatase structure were synthesized via combination method of sol-gel and peptization process. The samples were characterized by X-ray diffraction (XRD), Transmission emission microscopy (TEM) and UV-Vis spectroscopy (UV-Vis). The presence of Fe3+ ion shifted the absorption profile of TiO2 to the longer wavelength side of the spectrum, indicating an obvious photocatalytic activity under visible irradiation. Photocatalytic activity of the samples were evaluated by methyl orange (MO) discolouration under UV-light irradiation. Compared with the pure TiO2 nanoparticles, the Fe-TiO2 nanoparticles exhibited higher photocatalytic activity with 95% discoloration within 2 h.

Chitin/TiO2 Composite for Photocatalytic Degradation of Phenol

2010 ◽  
Vol 132 ◽  
pp. 105-110 ◽  
Author(s):  
Kun Wan ◽  
Xiang Hong Peng ◽  
Ping Jing Du
Keyword(s):  
Photocatalytic Degradation ◽  
Ph Value ◽  
Uv Light ◽  
Sol Gel ◽  
Hplc Method ◽  
Tetrabutyl Titanate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Crystallographic Structures

Chitin/TiO2 composite was prepared through colloid TiO2 deposited on the chitin by controlling the pH value of the system, while colloid TiO2 was synthesized by the sol–gel method using tetrabutyl titanate as a precursor. The structures and morphologies of the chitin/TiO2 composite were characterized by FT-IR, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The photocatalytic degradation of phenol was investigated by HPLC method. The results revealed that the chitin/ TiO2 composite was an efficient photocatalyst for the degradation of phenol, and 99.2% of the phenol was degraded after 6h under UV light. The TiO2 was adsorbed on the chitin by hydrogen and titanoxane bonds between them. Colloid TiO2 was gradually deposited to form the anatase crystallographic structures, showing 2θ = 25.3, 37.8, 47.8 and 54.6. Such biocompatible photocatalyst might be applied in the field of various phenol pollutants abatement.

Synthesis of coral-globular-like composite Ag/TiO2-SnO2 and its photocatalytic degradation of rhodamine B under multiple modes

2017 ◽  
Vol 76 (8) ◽  
pp. 2120-2132 ◽  
Author(s):  
Q. Song ◽  
L. Li ◽  
N. Zhuo ◽  
H. N. Zhang ◽  
X. Chen ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Photocatalytic Degradation ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Organic Dyes ◽  
Uv Light ◽  
Sol Gel ◽  
X Ray ◽  
Tio2 Anatase

Taking cetyltrimethylammonium bromide (CTAB) as the template and using TiO2 as the substrate, coral-globular-like composite Ag/TiO2-SnO2 (CTAB) was successfully synthesized by the sol–gel combined with a temperature-programmed treatment method. X-ray diffraction, scanning electron microscopy (SEM), UV–vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, SEM combined with X-ray energy dispersive spectroscopy, and N2 adsorption–desorption tests were employed to characterize samples' crystalline phase, chemical composition, morphology and surface physicochemical properties. Results showed that composites not only had TiO2 anatase structure, but also had some generated SnTiO4, and the silver species was metallic Ag0. Ag/TiO2-SnO2 (CTAB) possessed a coral-globular-like structure with nanosheets in large quantities. The photocatalytic activity of Ag/TiO2-SnO2 (CTAB) had studied by degrading organic dyes under multi-modes, mainly using rhodamine B as the model molecule. Results showed that the coral-globular-like Ag/TiO2-SnO2 (CTAB) was higher photocatalytic activity than that of commercial TiO2, Ag/TiO2-SnO2, TiO2-SnO2 (CTAB), and TiO2-SnO2 under ultraviolet light irradiation. Moreover, Ag/TiO2-SnO2 (CTAB) composite can significantly affect the photocatalytic degradation under multi-modes including UV light, visible light, simulated solar light and microwave-assisted irradiation. Meanwhile, the photocatalytic activity of Ag/TiO2-SnO2 (CTAB) was maintained even after three cycles, indicating that the catalyst had good usability.

scholarly journals Copper oxide supported on graphene for phodegradation of rhodamine B

2015 ◽  
Vol 11 (4) ◽  
Author(s):  
Nurul Sahida Hassan ◽  
Nurul Jamilah Roslani ◽  
Aishah Abdul Jalil ◽  
Sugeng Triwahyono ◽  
Nur Fatien Salleh ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Copper Oxide ◽  
Photocatalytic Degradation ◽  
Rhodamine B ◽  
Industrial Wastewater ◽  
Water Contamination ◽  
X Ray Diffraction ◽  
Composite Photocatalyst ◽  
X Ray ◽  
First Order

In recent years, dyes are one of the major sources of the water contamination that lead to environmental problems. For instance, Rhodamine B (RhB) which was extensively used as a colorant in textile industries is toxic and carcinogenic. Among many techniques, photocatalytic degradation become the promising one to remove those dyes from industrial wastewater. Recently, graphene has shown outstanding performance in this application due to its intrinsic electron delocalisation which promotes electron transport between composite photocatalyst and pollutant molecules. While, copper oxide (CuO) is well-known has a lower bandgap energies compared to other semiconductors. Therefore, in this study, copper oxide supported on graphene (CuO/G) was prepared and its photocatalytic activity was tested on degradation of RhB. The catalysts were characterized by X-Ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) Spectroscopy. The results showed that the interaction between copper and graphene support could enhance the photocatalytic activity. The 5 wt% CuO/G was found to give the highest degradation (95%) of 10 mg L-1 of RhB solution at pH 7 using 1 g L-1 catalyst after 4 hours under visible light irradiation. The photodegradation followed the pseudo first-order Langmuir-Hinshelwood kinetic model. This study demonstrated that the CuO/G has a potential to be used in photocatalytic degradation of various organic pollutants.

scholarly journals Photocatalytic Performance of SiO2/CNOs/TiO2 to Accelerate the Degradation of Rhodamine B under Visible Light

Nanomaterials ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1671 ◽  
Author(s):  
Weike Zhang ◽  
Yanrong Zhang ◽  
Kai Yang ◽  
Yanqing Yang ◽  
Jia Jia ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Rhodamine B ◽  
Photoelectron Spectroscopy ◽  
Degradation Rate ◽  
Photocatalytic Performance ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electronic Microscope

A silicon dioxide/carbon nano onions/titanium dioxide (SiO2/CNOs/TiO2) composite was synthesized by a simple sol-gel method and characterized by the methods of X-ray diffraction (XRD), scanning electronic microscope (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), Fourier transform infrared (FTIR), thermogravimetric analysis (TG), differential scanning calorimeter (DSC) and UV-Vis diffuse reflectance spectra (UV-Vis DRS). In this work, the photocatalytic activity of the SiO2/CNOs/TiO2 photocatalyst was assessed by testing the degradation rate of Rhodamine B (RhB) under visible light. The results indicated that the samples exhibited the best photocatalytic activity when the composite consisted of 3% CNOs and the optimum dosage of SiO2/CNOs/TiO2(3%) was 1.5 g/L as evidenced by the highest RhB degradation rate (96%). The SiO2/CNOs/TiO2 composite greatly improved the quantum efficiency of TiO2. This work provides a new option for the modification of subsequent nanocomposite oxide nanoparticles.

scholarly journals Effects of mechanical activation on structure and photocatalytic properties of ZnO powders

2013 ◽  
Vol 11 (11) ◽  
pp. 1780-1785 ◽  
Author(s):  
Maria Gancheva ◽  
Reni Iordanova ◽  
Yanko Dimitriev ◽  
Georgi Avdeev ◽  
Tzvetoslav Iliev
Keyword(s):  
Photocatalytic Activity ◽  
Uv Light ◽  
Reflectance Spectroscopy ◽  
Sem Analysis ◽  
X Ray Diffraction ◽  
Time Intervals ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Band Position ◽  
Zno Powders

AbstractZinc oxide (ZnO) was mechanically activated in air using a planetary ball mill using varying milling speeds and time. The obtained samples were analyzed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and UV-Vis diffusion reflectance spectroscopy. The photocatalytic activity of the mechanically treated ZnO powders were investigated in the reaction of Malachite Green (MG) degradation in aqueous solution under UV-light irradiation. A decrease in the crystallite size (from 90 to 10 nm) accompanied by an increase of microstrains and lattice parameters were established applying different milling speeds. The agglomeration of the particles was observed by SEM analysis. The absorption spectra of the initial and mechanically activated ZnO samples show shifting of the band position from 360 to 330 nm, which can be related to decrease in the crystalline size. The ZnO powders activated at lower milling speeds (for shorter time intervals) exhibit highest photocatalytic activity.

Effects of Nd Doping on the Photocatalytic Behavior of Cu11O2 (VO4)6

2011 ◽  
Vol 393-395 ◽  
pp. 1181-1184
Author(s):  
Min Wang ◽  
Qiong Liu ◽  
Qi Xing
Keyword(s):  
Photocatalytic Activity ◽  
Uv Light ◽  
Sol Gel ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Photodegradation Rate ◽  
Triclinic Phase ◽  
Degradation Of Methyl Orange ◽  
Scanning Electron

Nd-doped Cu11O2 (VO4)6 photocatalyst was synthesized by complexing Sol-gel method and characterized by X-ray diffraction (XRD), scanning electron microscope (SEM) and energy Dispersive X-Ray Spectroscopy(EDX). The photocatalytic activity of Nd-doped Cu11O2 (VO4)6 was evaluated by photocatalytic degradation of methyl orange (MO) solution under UV-light. It revealed that the Nd-doped Cu11O2 (VO4)6 prepared with the molar ratio of citric acid to metal inons be 2:1, Nd/Cu molar ratio of 2%, pH=7 and calcinated under 500°C for 4 hours was pure triclinic phase. In this conditions, the sample had highest photocatalytic activity with the photodegradation rate was about 95.73% or so in 60min under 20W ultraviolet lamp.

The Influence of ZnO Components on the Photocatalytic Activity of Fe3O4-CuO-ZnO Nanocomposites

2015 ◽  
Vol 1123 ◽  
pp. 227-232 ◽  
Author(s):  
Iqriah Kalim Susanto ◽  
Ardiansyah Taufik ◽  
Rosari Saleh
Keyword(s):  
Methylene Blue ◽  
Photocatalytic Activity ◽  
Diffuse Reflectance Spectroscopy ◽  
Uv Light ◽  
Sol Gel ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Uv Visible

Nanocomposite Fe3O4-CuO-ZnO with different molar ratio of Fe3O4:CuO:ZnO were synthesized using sol-gel method and characterized by X-ray diffraction, energy dispersive X-ray spectroscopy, field emission scanning electron microscope, UV-visible diffuse reflectance spectroscopy and vibrating sample magnetometer. The characterization results manifested that the combination of Fe3O4, CuO and ZnO nanoparticles was successful. The photocatalytic activity of nanocomposite with the molar ratio of 1:1:5 was more effective in the degradation of methylene blue under UV light irradiation than pure Fe3O4, CuO, ZnO. The role of photoactive species involved in the photocatalytic reaction was studied and found that holes play the most important role in photodegradation of methylene blue.

Photodegradation of Reactive Red 141 and Reactive Yellow 105 Dyes Using Prepared TiO2 Nanoparticles

2014 ◽  
Vol 807 ◽  
pp. 65-79 ◽  
Author(s):  
Augustine Amalraj ◽  
P. Anitha Pius
Keyword(s):  
Uv Light ◽  
Sol Gel ◽  
Operational Parameters ◽  
X Ray Diffraction ◽  
Pseudo First Order Reaction ◽  
Illumination Time ◽  
X Ray ◽  
Uv Light Irradiation ◽  
Sol Gel Process ◽  
Dye Solutions

The photodegradation of Reactive Red 141 (RR-141) and Reactive Yellow 105 (RY-105) dyes using TiO2 nanoparticles was investigated under UV light irradiation. TiO2 was prepared by sol-gel process and characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM) with Energy Dispersive X-ray analysis (EDAX) and FTIR. The effects of operational parameters such as illumination time, catalyst dose, initial concentration and pH of dye solutions on photodegradation by TiO2 have been analyzed. The degradation of the selected dyes followed pseudo-first order reaction according to the Langmuir-Hinshelwood kinetic model.

scholarly journals Enhancement of Photocatalytic Activity of ZnO/SiO2by Nanosized Pt for Photocatalytic Degradation of Phenol in Wastewater

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
R. M. Mohamed ◽  
M. A. Barakat
Keyword(s):  
Photocatalytic Activity ◽  
Photocatalytic Degradation ◽  
Surface Area ◽  
Diffuse Reflectance Spectroscopy ◽  
Sol Gel ◽  
Phenol Degradation ◽  
Synthetic Wastewater ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron

ZnO- nanoparticles were synthesized by a sol-gel technique from and tetraethyl orthosilicate (TEOS). The synthesized samples were further modified by nanosized Pt from H2PtCl6solution through photoassisted deposition (PAD) and impregnation (Img) routes. The obtained samples were characterized by a series of techniques including X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy, N2adsorption, extended X-ray absorption fine structure (EXAFS), and transmission electron microscopy (TEM). The photocatalytic activity of the Pt-ZnO/ was evaluated by photocatalytic degradation of phenol in synthetic wastewater under UV-irradiation. Results obtained revealed that the surface area and the photocatalytic activity of the prepared samples were increased in the order ZnO/ < PAD: Pt-ZnO/ < img: Pt-ZnO/. The surface area decreased from 480 to 460 and 450 m2/g, while the efficiency of the phenol degradation increased from 80 to 85 and 100%, with the ZnO/, Img: Pt-ZnO-, and PAD: Pt-ZnO- samples, respectively.

Sign in / Sign up

Export Citation Format

Share Document