scholarly journals The Study on Detection Method of Water Vapor on Boundary Layer Based on Multiagent System

2015 ◽  
Vol 2015 ◽  
pp. 1-9
Author(s):  
Xu Dongdong ◽  
Zhou Jie ◽  
Xia Jingming ◽  
Lu Zhenyu ◽  
Huan Hai
Keyword(s):  
Boundary Layer ◽  
Water Vapor ◽  
Multiagent System ◽  
Detection Method ◽  
Weather Conditions ◽  
Signal Propagation ◽  
Refraction Index ◽  
Base Station ◽  
Propagation Path ◽  
Electromagnetic Signals

A method of detecting water vapor on boundary layer based on multiagent system is proposed in this paper. Multiagent system receives electromagnetic signals emitted by the telecommunication base station. Due to the analysis of the actual electromagnetic wave signal propagation path in the atmosphere, atmospheric refraction index and moisture inversion are discussed in this paper. And the feasibility of using electromagnetic detection method is also analyzed. A multiagent system is designed to receive the electromagnetic signals. The composition and function of the multiagent system are clearly described. The atmospheric refractivity is detected by the multiagent system in three weather conditions of sunny, foggy, and rainy days. The results demonstrate the feasibility of water vapor detection method of multiagent system boundary by comparing the result of experiment with traditional method.

scholarly journals Effects of Atmospheric Refraction on an Airborne Weather Radar Detection and Correction Method

2015 ◽  
Vol 2015 ◽  
pp. 1-8
Author(s):  
Lei Wang ◽  
Ming Wei ◽  
Tao Yang ◽  
Ping Liu
Keyword(s):  
Weather Radar ◽  
Weather Conditions ◽  
Refraction Index ◽  
Correction Method ◽  
Propagation Path ◽  
Radar Detection ◽  
Atmospheric Refraction ◽  
Radar Beam ◽  
Fitting Method ◽  
Flight Parameters

This study investigates the effect of atmospheric refraction, affected by temperature, atmospheric pressure, and humidity, on airborne weather radar beam paths. Using three types of typical atmospheric background sounding data, we established a simulation model for an actual transmission path and a fitted correction path of an airborne weather radar beam during airplane take-offs and landings based on initial flight parameters and X-band airborne phased-array weather radar parameters. Errors in an ideal electromagnetic beam propagation path are much greater than those of a fitted path when atmospheric refraction is not considered. The rates of change in the atmospheric refraction index differ with weather conditions and the radar detection angles differ during airplane take-off and landing. Therefore, the airborne radar detection path must be revised in real time according to the specific sounding data and flight parameters. However, an error analysis indicates that a direct linear-fitting method produces significant errors in a negatively refractive atmosphere; a piecewise-fitting method can be adopted to revise the paths according to the actual atmospheric structure. This study provides researchers and practitioners in the aeronautics and astronautics field with updated information regarding the effect of atmospheric refraction on airborne weather radar detection and correction methods.

scholarly journals Compact Operational Tropospheric Water Vapor and Temperature Raman Lidar with Turbulence Resolution

2020 ◽  
Author(s):  
Diego Lange Vega ◽  
Andreas Behrendt ◽  
Volker Wulfmeyer
Keyword(s):  
Boundary Layer ◽  
Water Vapor ◽  
Data Assimilation ◽  
Inversion Layer ◽  
Lower Troposphere ◽  
Weather Conditions ◽  
Statistical Uncertainty ◽  
Temperature Profiles ◽  
Free Troposphere ◽  
Earth System

<p>Here we present the new Atmospheric Raman Temperature and Humidity Sounder (ARTHUS), an exceptional tool for observations in the atmospheric boundary layer during daytime and nighttime with a very short latency. ARTHUS measurements resolve the strength of the inversion layer at the planetary boundary layer top, elevated lids in the free troposphere during daytime and nighttime, and turbulent fluctuations in water vapor and temperature, simultaneously, also during daytime.</p><p>The observation of atmospheric moisture and temperature profiles is essential for the understanding and prediction of earth system processes. These are fundamental components of the global and regional energy and water cycles, they determine the radiative transfer through the atmosphere, and are critical for the clouds formation and precipitation. Also, it is expected that the assimilation of high-quality, lower tropospheric WV and T profiles will result in a considerable improvement of the skill of weather forecast models particularly with respect to extreme events.</p><p>Very stable and reliable performance was demonstrably achieved during more than 2500 hours of operations time experiencing a huge variety of weather conditions. ARTHUS provides temperature profiles with resolutions of 10-60 s and 7.5-100 m vertically in the lower free troposphere. During daytime, the statistical uncertainty of the WV mixing ratio is <2 % in the lower troposphere for resolutions of 5 minutes and 100 m. Temperature statistical uncertainty is <0.5 K even up to the middle troposphere. ARTHUS fulfills the stringent WMO breakthrough requirements on nowcasting and very short-range forecasting.</p><p>This performance serves very well the next generation of very fast rapid-update-cycle data assimilation systems. Ground-based stations and networks can be set up or extended for climate monitoring, verification of weather, climate and earth system models, data assimilation for improving weather forecasts.</p>

scholarly journals Joint UAV channel modeling and power control for 5G IoT networks

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Xiuhua Fu ◽  
Tian Ding ◽  
Rongqun Peng ◽  
Cong Liu ◽  
Mohamed Cheriet
Keyword(s):  
Energy Efficiency ◽  
Power Control ◽  
Channel Model ◽  
Path Loss ◽  
Channel Modeling ◽  
Signal Propagation ◽  
Spectrum Efficiency ◽  
Propagation Path ◽  
Control Factor ◽  
The Impact

AbstractThis paper studies the communication problem between UAVs and cellular base stations in a 5G IoT scenario where multiple UAVs work together. We are dedicated to the uplink channel modeling and the performance analysis of the uplink transmission. In the channel model, we consider the impact of 3D distance and multi-UAVs reflection on wireless signal propagation. The 3D distance is used to calculate the path loss, which can better reflect the actual path loss. The power control factor is used to adjust the UAV's uplink transmit power to compensate for different propagation path losses, so as to achieve precise power control. This paper proposes a binary exponential power control algorithm suitable for 5G networked UAV transmitters and presents the entire power control process including the open-loop phase and the closed-loop phase. The effects of power control factors on coverage probability, spectrum efficiency and energy efficiency under different 3D distances are simulated and analyzed. The results show that the optimal power control factor can be found from the point of view of energy efficiency.

scholarly journals Assessment of Sampling Effects on Various Satellite-Derived Integrated Water Vapor Datasets Using GPS Measurements in Germany as Reference

2020 ◽  
Vol 12 (7) ◽  
pp. 1170 ◽  
Author(s):  
Cintia Carbajal Henken ◽  
Lisa Dirks ◽  
Sandra Steinke ◽  
Hannes Diedrich ◽  
Thomas August ◽  
...  
Keyword(s):  
Water Vapor ◽  
Pairwise Comparison ◽  
Weather Conditions ◽  
Satellite System ◽  
High Temporal Resolution ◽  
Data Sets ◽  
Frequency Distributions ◽  
Temporal Sampling ◽  
Global Navigation Satellite ◽  
Satellite Instruments

Passive imagers on polar-orbiting satellites provide long-term, accurate integrated water vapor (IWV) data sets. However, these climatologies are affected by sampling biases. In Germany, a dense Global Navigation Satellite System network provides accurate IWV measurements not limited by weather conditions and with high temporal resolution. Therefore, they serve as a reference to assess the quality and sampling issues of IWV products from multiple satellite instruments that show different orbital and instrument characteristics. A direct pairwise comparison between one year of IWV data from GPS and satellite instruments reveals overall biases (in kg/m 2 ) of 1.77, 1.36, 1.11, and −0.31 for IASI, MIRS, MODIS, and MODIS-FUB, respectively. Computed monthly means show similar behaviors. No significant impact of averaging time and the low temporal sampling on aggregated satellite IWV data is found, mostly related to the noisy weather conditions in the German domain. In combination with SEVIRI cloud coverage, a change of shape of IWV frequency distributions towards a bi-modal distribution and loss of high IWV values are observed when limiting cases to daytime and clear sky. Overall, sampling affects mean IWV values only marginally, which are rather dominated by the overall retrieval bias, but can lead to significant changes in IWV frequency distributions.

Why sometimes its simply sunny (in the trades)

2021 ◽  
Author(s):  
Bjorn Stevens ◽  
Ilya Serikov ◽  
Anna Lea Albright ◽  
Sandrine Bony ◽  
Geet George ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Water Vapor ◽  
Marine Boundary Layer ◽  
Cloud Base ◽  
Lidar Signal ◽  
Cloud Base Height

<p>Cloud free skies are rare in the trades.  We analyze conditions in which cloud-free conditions prevail.  For this purpose Raman water vapor measurements from the Barbados Cloud Observatory, complemented by ship-based measurements during EUREC4A are used to explore water vapor variability in the marine boundary layer.   We explore the consistency of the inferred cloud base height with estimates of temperature and water vapor from the lidar signal, and examine the co-variability of these quantities.  After having established the properties of these measurements, we seek to use them as well as others, to explain in what ways periods of cloud-free conditions are maintained, investigating the hypothesis that only when the wind stills is it simply sunny.</p>

Evaluation of parental raspberry breeding forms for fruit size

2021 ◽  
pp. 16-22
Author(s):  
M. A. Podgaetskiy ◽  
S. N. Evdokimenko
Keyword(s):  
Objective Assessment ◽  
Fruit Size ◽  
Weather Conditions ◽  
Base Station ◽  
Average Weight ◽  
Trial Period ◽  
Parental Form ◽  
Breeding Sites ◽  
Berry Weight ◽  
Berry Size

Te article tackles the feasibility of improving the raspberry fruit size as an important production and marketability factor. Te trials included 22 domestic and foreign cultivars, 11 selected forms of raspberry, as well as ten cross-breeding combinations and three open-pollinated forms. Te assessment of parental forms and hybrids was carried out at the collection and breeding sites of the Kokino base station of Federal Horticultural Center for Breeding, Agrotechnology and Nursery during 2016-2020. Fruits were harvested from regular cultivar bushes every 2 days in triplicate. Te average weight was determined per 100 berries in each replicate. Cultivars and hybrids were divided into three groups, small- (3.6 g). Te average berry weight in hybrid nurslings was estimated per plant. Each plant was sampled with 30 berries. Weighing was performed with an SCC-750 electronic scales device. Te weather conditions of the trial period were contrast, allowing a more objective assessment of the collection and breeding raspberry material by berry weight. Te following cultivars were identified as the sources of improved berry size in the parental form trials: Maria, Cascade Delight, Fenomen, Lavina, Cowichan, Patricia, Laczka, Glen Ample and selections 2-115-1, 8-13-2, 18-11-3, 18-11-2, 2-90-2 and 2-90-3. Tese forms had an average trial-period berry weight of 3.7-4.3 g least affected by weather conditions. Te inspection of hybrids revealed the best parental forms for obtaining new raspberry cultivars with an improved berry weight: Maria, Fenomen, Lavina, Cowichan, Glen Ample and the selected form 8-13-2. Te promising cross-combinations are: 2-12-1 x Fenomen, Lavina x Ulybka, 8-13-2 x Peresvet, as well as the open-pollinated offspring of Glen Ample, Cowichan and Maria. Large-fruited genotypes isolated in these lineages will be used in further breeding to increase the fruit size in raspberry.

scholarly journals A Lidar at Clermont-Ferrand—France to describe the boundary layer dynamics, aerosols, cirrus and tropospheric water vapor

2018 ◽  
Vol 176 ◽  
pp. 05047
Author(s):  
J.L. Baray ◽  
P. Fréville ◽  
N. Montoux ◽  
A. Chauvigné ◽  
D. Hadad ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Water Vapor ◽  
Vertical Profiles ◽  
Raman Lidar ◽  
Tropospheric Aerosols ◽  
Boundary Layer Dynamics

A Rayleigh-Mie-Raman LIDAR provides vertical profiles of tropospheric variables at Clermont-Ferrand (France) since 2008, in order to describe the boundary layer dynamics, tropospheric aerosols, cirrus and water vapor. It is included in the EARLINET network. We performed hardware/software developments in order to upgrade the quality, calibration and improve automation. We present an overview of the system and some examples of measurements and a preliminary geophysical analysis of the data.

scholarly journals A Framework to Study Mixing Processes in the Marine Boundary Layer Using Water Vapor Isotope Measurements

2018 ◽  
Vol 45 (5) ◽  
pp. 2524-2532 ◽  
Author(s):  
M. Benetti ◽  
J.‐L. Lacour ◽  
A. E. Sveinbjörnsdóttir ◽  
G. Aloisi ◽  
G. Reverdin ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Water Vapor ◽  
Marine Boundary Layer ◽  
Mixing Processes ◽  
Isotope Measurements

scholarly journals Technical Note: Novel method for water vapour monitoring using wireless communication networks measurements

2009 ◽  
Vol 9 (7) ◽  
pp. 2413-2418 ◽  
Author(s):  
N. David ◽  
P. Alpert ◽  
H. Messer
Keyword(s):  
Wireless Communication ◽  
Water Vapour ◽  
Communication Networks ◽  
Weather Conditions ◽  
Technical Note ◽  
Base Stations ◽  
Propagation Path ◽  
High Temporal Resolution ◽  
Wireless Communication Networks ◽  
Near Surface

Abstract. We propose a new technique that overcomes the obstacles of the existing methods for monitoring near-surface water vapour, by estimating humidity from data collected through existing wireless communication networks. Weather conditions and atmospheric phenomena affect the electromagnetic channel, causing attenuations to the radio signals. Thus, wireless communication networks are in effect built-in environmental monitoring facilities. The wireless microwave links, used in these networks, are widely deployed by cellular providers for backhaul communication between base stations, a few tens of meters above ground level. As a result, if all available measurements are used, the proposed method can provide moisture observations with high spatial resolution and potentially high temporal resolution. Further, the implementation cost is minimal, since the data used are already collected and saved by the cellular operators. In addition – many of these links are installed in areas where access is difficult such as orographic terrain and complex topography. As such, our method enables measurements in places that have been hard to measure in the past, or have never been measured before. The technique is restricted to weather conditions which exclude rain, fog or clouds along the propagation path. Strong winds that may cause movement of the link transmitter or receiver (or both) may also interfere with the ability to conduct accurate measurements. We present results from real-data measurements taken from two microwave links used in a backhaul cellular network that show convincing correlation to surface station humidity measurements. The measurements were taken daily in two sites, one in northern Israel (28 measurements), the other in central Israel (29 measurements). The correlation between the microwave link measurements and the humidity gauges were 0.9 and 0.82 for the north and central sites, respectively. The Root Mean Square Differences (RMSD) were 1.8 g/m3 and 3.4 g/m3 for the northern and central site measurements, respectively.

Sign in / Sign up

Export Citation Format

Share Document