scholarly journals Determination of Oleanolic and Ursolic Acids inHedyotis diffusaUsing Hyphenated Ultrasound-Assisted Supercritical Carbon Dioxide Extraction and Chromatography

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Ming-Chi Wei ◽  
Yu-Chiao Yang ◽  
Show-Jen Hong
Keyword(s):  
Carbon Dioxide ◽  
Supercritical Carbon Dioxide ◽  
High Performance ◽  
Extraction Yield ◽  
Extraction Time ◽  
Different Temperatures ◽  
Ultrasound Assisted ◽  
High Concentrations ◽  
Static Extraction ◽  
Supercritical Carbon

Oleanolic acid (OA) and ursolic acid (UA) were extracted fromHedyotis diffusausing a hyphenated procedure of ultrasound-assisted and supercritical carbon dioxide (HSC–CO2) extraction at different temperatures, pressures, cosolvent percentages, and SC–CO2flow rates. The results indicated that these parameters significantly affected the extraction yield. The maximal yields of OA (0.917 mg/g of dry plant) and UA (3.540 mg/g of dry plant) were obtained at a dynamic extraction time of 110 min, a static extraction time of 15 min, 28.2 MPa, and 56°C with a 12.5% (v/v) cosolvent (ethanol/water = 82/18, v/v) and SC–CO2flowing at 2.3 mL/min (STP). The extracted yields were then analyzed by high performance liquid chromatography (HPLC) to quantify the OA and UA. The present findings revealed thatH. diffusais a potential source of OA and UA. In addition, using the hyphenated procedure for extraction is a promising and alternative process for recovering OA and UA fromH. diffusaat high concentrations.

scholarly journals Extraction and Solubility Modeling of Anthocyanins Rich Extract from Hibiscus sabdariffa L. using Supercritical Carbon Dioxide

2021 ◽  
Vol 17 (6) ◽  
pp. 720-730
Author(s):  
Zuhaili Idham ◽  
Nicky Rahmana Putra ◽  
Hasmida Nasir ◽  
Lee Nian Yian ◽  
Nor Faadila Mohd Idrus ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Supercritical Carbon Dioxide ◽  
Extraction Yield ◽  
Hibiscus Sabdariffa ◽  
Different Temperatures ◽  
Supercritical Carbon

This study aimed to evaluate the extraction yield, and anthocyanins content of Hibiscus sabdariffa L. calyces extract using different temperatures (T) at 50 - 70°C, pressure (P) at 8 - 12 MPa, and modifier ratio at 5 - 10%.  

scholarly journals Process optimization for the supercritical carbondioxide extraction of lycopene from ripe grapefruit (Citrus paradisi) endocarp

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Supriya Priyadarsani ◽  
Avinash Singh Patel ◽  
Abhijit Kar ◽  
Sukanta Dash
Keyword(s):  
Carbon Dioxide ◽  
Supercritical Carbon Dioxide ◽  
Flow Rate ◽  
Polynomial Regression ◽  
Operating Parameter ◽  
Extraction Yield ◽  
Extraction Time ◽  
Citrus Paradisi ◽  
Polynomial Regression Models ◽  
Supercritical Carbon

AbstractIn this study, an underutilized citrus family fruit named grapefruit was explored for the extraction of lycopene using supercritical carbon dioxide (CO2) extraction technique. An experimental design was developed using response surface methodology to investigate the effect of supercritical carbon dioxide (CO2) operating parameter viz., pressure, temperature, CO2 flow rate, and extraction time on the extraction yield of lycopene yield from grapefruit. A total of 30 sets of experiments were conducted with six central points. The statistical model indicated that extraction pressure and extraction time individually, and their interaction, significantly affected the lycopene yield. The central composite design showed that the polynomial regression models developed were in agreement with the experimental results, with R2 of 0.9885. The optimum conditions for extraction of lycopene from grapefruit were 305 bar pressure, 35 g/min CO2 flow rate, 135 min of extraction time, and 70 °C temperature.

scholarly journals Determination of extraction conditions of Ginkgo biloba L. leaves by supercritical CO2 using response surface methodology

2011 ◽  
Vol 65 (2) ◽  
pp. 147-157 ◽  
Author(s):  
Svetlana Milosevic ◽  
Zika Lepojevic ◽  
Zoran Zekovic ◽  
Senka Vidovic
Keyword(s):  
Carbon Dioxide ◽  
Supercritical Carbon Dioxide ◽  
Response Surface ◽  
Process Parameters ◽  
Ginkgo Biloba ◽  
Supercritical Co2 ◽  
Extraction Yield ◽  
Extraction Time ◽  
Order Polynomial ◽  
Supercritical Carbon

The effects of process parameters on the extraction of Ginkgo biloba L. leaves with supercritical carbon dioxide were investigated. The investigated parameters include particle size (mean particle diameter 0.19, 0.467 and 1.009 mm), solvent flow rate (1.5810-3, 3.2210-3 and 4.1610-3 kg CO2/min) and pressure (100-300 bar), which were obtained by the response surface methodology (RSM) under the following condition ranges: temperature 40-50-60?C, pressure 100-140-180 bar and extraction time of 2-3-4 h at the flow rate of 3.2210-3 kg/min. Based on the experimental results of kinetics of Ginkgo biloba leaves extraction with supercritical carbon dioxide, modeling of the extraction system of Ginkgo biloba-supercritical CO2 was done. Two mathematical models (Reverchon-Sesti Osseo and Sovov?) were applied to correlate the experimental data. RSM was applied to optimize the process parameters of supercritical carbon dioxide extraction of Ginkgo biloba L. leaves. A second-order polynomial response surface equation was developed indicating the effect of variables on Ginkgo biloba extraction yield. The statistical analysis of the experiment indicated that pressure (X1), extraction time (X3), the quadratic of temperature (X22), and the interaction between pressure and extraction time (X1X3), show significant effect on the extraction yield. The results showed that the data were adequately fitted into the second-order polynomial model. It was predicted that the optimum extraction process parameters within the experimental ranges would be the extraction temperature of 52.7?C, the pressure of 184.4 bar, and the extraction time of 3.86 h. Under these conditions, the predicted extraction yield is 2.39% (g/100 g drug).

scholarly journals Extraction of essential oils from lime (Citrus latifolia Tanaka) by hydrodistillation and supercritical carbon dioxide

2005 ◽  
Vol 48 (1) ◽  
pp. 155-160 ◽  
Author(s):  
Ana Cristina Atti-Santos ◽  
Marcelo Rossato ◽  
Luciana Atti Serafini ◽  
Eduardo Cassel ◽  
Patrick Moyna
Keyword(s):  
Carbon Dioxide ◽  
Supercritical Carbon Dioxide ◽  
Essential Oils ◽  
Flow Rate ◽  
Plant Material ◽  
Supercritical Extraction ◽  
Extraction Time ◽  
Citrus Latifolia ◽  
Co2 Flow ◽  
Supercritical Carbon

In this work lime essential oils were extracted by hydrodistillation and supercritical carbon dioxide. In the case of hydrodistillation, the parameters evaluated were extraction time and characteristics of the plant material. In supercritical extraction, the parameters evaluated were temperature, pressure, CO2 flow, extraction time and material characteristics. Considering citral content, the best results for hydrodistillation were obtained with a distillation time of 3 hours using whole peels. The best results for supercritical extraction were found using 60ºC, 90 bar, at a CO2 flow rate of 1 mL/ min for 30 minutes using milled peels. The best yields of lime oil were obtained by hydrodistillation (5.45% w/w) and supercritical extraction (7.93% w/w) for milled peels.

scholarly journals Polysulfone foam with high expansion ratio prepared by supercritical carbon dioxide assisted molding foaming method

RSC Advances ◽  
2018 ◽  
Vol 8 (6) ◽  
pp. 2880-2886 ◽  
Author(s):  
Zhengkun Li ◽  
Yingbin Jia ◽  
Shibing Bai
Keyword(s):  
Carbon Dioxide ◽  
Supercritical Carbon Dioxide ◽  
High Performance ◽  
Expansion Ratio ◽  
Supercritical Carbon

Polysulfone foam with high expansion ratio and high performance was prepared by new foaming method using CO2 and press vulcanizer.

Sign in / Sign up

Export Citation Format

Share Document