scholarly journals Scalable Production of Iron Oxide Nanowhiskers

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Thomas Macher ◽  
Jennifer Sherwood ◽  
Yaolin Xu ◽  
Min Lee ◽  
Grayson Dennis ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Iron Oxide ◽  
Large Scale ◽  
Critical Parameter ◽  
Scale Up ◽  
Water Soluble ◽  
Laboratory Scale ◽  
Transmission Electron ◽  
Steel Tank ◽  
Scalable Production

We reported the scalable production of iron oxide nanowhiskers from 250 mL laboratory scale to 10 L reactor reaction. During the scale-up process, the reaction time was found to be a critical parameter to adjust for the production of iron oxide nanowhiskers with similar quality to that of the laboratory scale. Based on transmission electron microscopy and magnetometry analysis, the size, size distribution, and magnetic properties of the large scale products were comparable to those produced on laboratory scale. Subsequently, these nanowhiskers were transferred from organic solvents to aqueous solution using a 38-liter stainless steel tank. These water soluble nanowhiskers were well dispersed in water and the surface chemistry was confirmed by Fourier transform infrared spectroscopy.

scholarly journals Rapid synthesis and characterization of silver-loaded graphene oxide nanomaterials and their antibacterial applications

2021 ◽  
Vol 8 (2) ◽  
Author(s):  
Jiang Zhu ◽  
Haitao Ni ◽  
Chunyan Hu ◽  
Yuxiang Zhu ◽  
Jinxia Cai ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Graphene Oxide ◽  
Large Scale ◽  
Structural Characteristics ◽  
Water Soluble ◽  
Scale Production ◽  
Energy Dispersion Spectroscopy ◽  
Gram Positive Bacteria ◽  
Transmission Electron ◽  
Large Scale Production

With the promising potential application of Ag/graphene-based nanomaterials in medicine and engineering materials, the large-scale production has attracted great interest of researchers on the basis of green synthesis. In this study, water-soluble silver/graphene oxide (Ag/GO) nanomaterials were synthesized under ultrasound-assisted conditions. The structural characteristics of Ag/GO were confirmed by Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy and energy dispersion spectroscopy, respectively. The results showed the silver particles (AgNPs) obtained by reduction were attached to the surface of GO, and there was a strong interaction between AgNPs and GO. The antibacterial activity was primarily evaluated by the plate method and hole punching method. Antibacterial tests indicated that Ag/GO could inhibit the growth of Gram-negative and Gram-positive bacteria, special for the Staphylococcus aureus .

scholarly journals Synthesis of a thermoresponsive crosslinked MEO2MA polymer coating on microclusters of iron oxide nanoparticles

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Alejandro Lapresta-Fernández ◽  
Alfonso Salinas-Castillo ◽  
Luis Fermín Capitán-Vallvey
Keyword(s):  
Iron Oxide ◽  
Synthesis Temperature ◽  
Water Soluble ◽  
Covalent Attachment ◽  
Solution Temperature ◽  
Tetraethylene Glycol ◽  
Critical Solution Temperature ◽  
Large Size ◽  
Transmission Electron ◽  
Azo Initiator

AbstractEncapsulation of magnetic nanoparticles (MNPs) of iron (II, III) oxide (Fe3O4) with a thermopolymeric shell of a crosslinked poly(2-(2-methoxyethoxy)ethyl methacrylate) P(MEO2MA) is successfully developed. Magnetic aggregates of large size, around 150–200 nm are obtained during the functionalization of the iron oxide NPs with vinyl groups by using 3-butenoic acid in the presence of a water soluble azo-initiator and a surfactant, at 70 °C. These polymerizable groups provide a covalent attachment of the P(MEO2MA) shell on the surface of the MNPs while a crosslinked network is achieved by including tetraethylene glycol dimethacrylate in the precipitation polymerization synthesis. Temperature control is used to modulate the swelling-to-collapse transition volume until a maximum of around 21:1 ratio between the expanded: shrunk states (from 364 to 144 nm in diameter) between 9 and 49 °C. The hybrid Fe3O4@P(MEO2MA) microgel exhibits a lower critical solution temperature of 21.9 °C below the corresponding value for P(MEO2MA) (bulk, 26 °C). The MEO2MA coating performance in the hybrid microgel is characterized by dynamic light scattering and transmission electron microscopy. The content of preformed MNPs [up to 30.2 (wt%) vs. microgel] was established by thermogravimetric analysis while magnetic properties by vibrating sample magnetometry.

Low Temperature Large Scale CVD Synthesis of Nano Onion-Like Fullerenes

2012 ◽  
Vol 490-495 ◽  
pp. 3211-3214 ◽  
Author(s):  
Lei Shan Chen ◽  
Cun Jing Wang
Keyword(s):  
Electron Microscopy ◽  
Low Temperature ◽  
Aluminum Hydroxide ◽  
Large Scale ◽  
Iron Catalyst ◽  
Chemical Vapor ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Naoh Solution ◽  
Synthesis Reactions

Synthesis reactions were carried out by chemical vapor deposition using iron catalyst supported on aluminum hydroxide at 400 °C and 420 °C, in the presence of argon as carrier gas and acetylene as carbon source. The aluminum hydroxide support was separated by refluxing the samples in 40% NaOH solution for 2 h and 36% HCl solution for 24 h, respectively. The samples were characterized by field-emission scanning electron microscopy, energy dispersive spectroscopy, high-resolution transmission electron microscopy and X-ray diffraction. The results show that carbon nanotubes were the main products at 420 °C, while large scale high purity nano onion-like fullerenes encapsulating Fe3C, with almost uniform sizes ranging from 10-50 nm, were obtained at the low temperature of 400 °C.

Microstructure and superconducting properties of attrition-milled Bi2Sr2CaCu2Ox

1994 ◽  
Vol 9 (2) ◽  
pp. 297-304 ◽  
Author(s):  
J.S. Luo ◽  
H.G. Lee ◽  
S.N. Sinha
Keyword(s):  
Electron Microscopy ◽  
Milled Powder ◽  
High Energy ◽  
Double Layers ◽  
Superconducting Transition ◽  
Superconducting Properties ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Steel Tank ◽  
Practical Implications

The microstructure and superconducting properties of Bi2Sr2CaCu2Ox (Bi-2212) during high-energy attrition milling were investigated in detail by a combination of x-ray diffraction, scanning electron microscopy, transmission electron microscopy, and magnetization techniques. The starting superconducting powder was milled in a standard laboratory attritor using yttria-stabilized ZrO2 balls and a stainless steel tank. After selected time increments, the milling was interrupted and a small quantity of milled powder was removed for further analysis. It was found that the deformation process rapidly refines Bi-2212 into nanometer-size crystallites, increases atomic-level strains, and changes the plate-like morphology of Bi-2212 to granular submicron clusters. At short milling times, the deformation seems localized at weakly linked Bi-O double layers, leading to twist/cleavage fractures along the {001} planes. The Bi-2212 phase decomposes into several bismuth-based oxides and an amorphous phase after excessive deformation. The superconducting transition is depressed by about 10 K in the early stages of milling and completely vanishes upon prolonged deformation. A deformation mechanism is proposed and correlated with the evolution of superconducting properties. The practical implications of these results are presented and discussed.

Synthesis and Characterization of Water-Soluble Monolayer-Protected Gold Nanoparticles

2011 ◽  
Vol 415-417 ◽  
pp. 617-620 ◽  
Author(s):  
Yan Su ◽  
Ying Yun Lin ◽  
Yu Li Fu ◽  
Fan Qian ◽  
Xiu Pei Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Particle Size ◽  
Gold Nanoparticles ◽  
Average Particle Size ◽  
Water Soluble ◽  
Synthesis And Characterization ◽  
Average Particle ◽  
Transmission Electron

Water-soluble gold nanoparticles (AuNPs) were prepared using 2-mercapto-4-methyl-5- thiazoleacetic acid (MMTA) as a stabilizing agent and sodium borohydride (NaBH4) as a reducing agent. The AuNPs product was analyzed by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and Fourier transform infrared spectroscopy (FTIR). The TEM image shows that the particles were well-dispersed and their average particle size is about 5 nm. The UV-vis absorption and FTIR spectra confirm that the MMTA-AuNPs was stabilized by the carboxylate ions present on the surface of the AuNPs.

Control of Morphology and Growth Direction of Gallium Nitride Nanostructures

2003 ◽  
Vol 789 ◽  
Author(s):  
Seung Yong Bae ◽  
Hee Won Seo ◽  
Jeunghee Park
Keyword(s):  
Electron Microscopy ◽  
Gallium Nitride ◽  
Large Scale ◽  
Chemical Vapor ◽  
Growth Direction ◽  
Chemical Vapor Deposition Method ◽  
X Ray Diffraction ◽  
Oxide Mixture ◽  
Temperature Range ◽  
Transmission Electron

ABSTRACTVarious shaped single-crystalline gallium nitride (GaN) nanostructures were produced by chemical vapor deposition method in the temperature range of 900–1200 °C. Scanning electron microscopy, transmission electron microscopy, electron diffraction, x-ray diffraction, electron energy loss spectroscopy, Raman spectroscopy, and photoluminescence were used to investigate the structural and optical properties of the GaN nanostructures. We controlled the GaN nanostructures by the catalyst and temperature. The cylindrical and triangular shaped nanowires were synthesized using iron and gold nanoparticles as catalysts, respectively, in the temperature range of 900 – 1000 °C. We synthesized the nanobelts, nanosaws, and porous nanowires using gallium source/ boron oxide mixture. When the temperature of source was 1100 °C, the nanobelts having a triangle tip were grown. At the temperature higher up to 1200 °C the nanosaws and porous nanowires were formed with a large scale. The cylindrical nanowires have random growth direction, while the triangular nanowires have uniform growth direction [010]. The growth direction of the nanobelts is perpendicular to the [010]. Interestingly, the nanosaws and porous nanowires exhibit the same growth direction [011]. The shift of Raman, XRD, and PL bands from those of bulk was correlated with the strains of the GaN nanostructures.

AQUEOUS SYNTHESIS OF HIGH QUANTUM YIELD AND MONODISPERSED THIOL-CAPPED CdxZn1-xTe QUANTUM DOTS BASED ON ELECTROCHEMICAL METHOD

NANO ◽  
2012 ◽  
Vol 07 (02) ◽  
pp. 1250011 ◽  
Author(s):  
JUNWEI LI ◽  
YANG JIANG ◽  
YUGANG ZHANG ◽  
DI WU ◽  
ANQI LUO ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Quantum Dots ◽  
Quantum Yield ◽  
Electrochemical Method ◽  
Large Scale ◽  
Ostwald Ripening ◽  
Visible Absorption ◽  
Aqueous Synthesis ◽  
Transmission Electron

A facile green approach has been developed to control the growth regime in the aqueous synthesis of CdxZn1-xTe semiconductor quantum dots (QDs) based on the electrochemistry method. The Low growth temperature and slow injection of Te precursor are used to prolong the diffusion controlled stage and thus suppress Ostwald ripening during the nanocrystal growth. The experimental results showed that a low concentration of Te precursor will definitely influence the growth procedure. The UV–visible absorption spectra, as well as transmission electron microscopy (TEM) shows the QDs a good monodispersity at any interval of the reaction procedure. The high-resolution transmission electron microscopy (HRTEM) images and powder X-ray diffraction (XRD) pattern suggested that the as-prepared QDs have high crystallinity and cubic structure. The size and composition-dependent fluorescent emission wavelength of the resultant CdxZn1-xTe alloyed QDs can be tuned from 460 to 610 nm, and their photoluminescent quantum yield can reach up to 70%. Especially in the wavelength range of 510–578 nm, the overall PL QYs of the as-prepared CdxZn1-xTe QDs were above 50%. The current work suggests that electrochemical method is an attractive approach to the synthesis of high-quality II-VI ternary alloyed semiconductor QDs at large-scale with a prominent cost advantage.

Formation of bismuth iron oxide based core–shell structures and their dielectric, ferroelectric and magnetic properties

2019 ◽  
Vol 7 (5) ◽  
pp. 1280-1291 ◽  
Author(s):  
Alaka Panda ◽  
R. Govindaraj ◽  
R. Mythili ◽  
G. Amarendra
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Magnetic Properties ◽  
Iron Oxide ◽  
Shell Structures ◽  
Core Shell ◽  
Bismuth Iron Oxide ◽  
The Core ◽  
Shell Nanostructures ◽  
Transmission Electron

Bismuth and iron oxides subjected to ball milling followed by controlled annealing treatments showed the formation of core–shell nanostructures with Bi2Fe4O9 as the core and a shell of BiFeO3 and Bi25FeO40 phases as deduced based on the analysis of transmission electron microscopy results.

Facile synthesis of water-soluble graphene-based composite: Non-covalently functionalized with chitosan-ionic liquid conjugation

2016 ◽  
Vol 09 (03) ◽  
pp. 1650045 ◽  
Author(s):  
Pei-Ying Li ◽  
Kai-Yu Cheng ◽  
Xiu-Cheng Zheng ◽  
Pu Liu ◽  
Xiu-Juan Xu
Keyword(s):  
Electron Microscopy ◽  
Ionic Liquid ◽  
Chemical Reduction ◽  
Water Soluble ◽  
X Ray Diffraction ◽  
Facile Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Text Interaction

Chitosan-ionic liquid conjugation (CILC), which was prepared through the reaction of 1-(4-bromobutyl)-3-methylimidazolium bromide (BBMIB) with chitosan, was firstly used to prepare functionalized graphene composite via the chemical reduction of graphene oxide (GO). The obtained water soluble graphene-based composite was characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), ultraviolet-visible (UV–Vis) spectroscopy and so on. CILC-RGO showed excellent dispersion stability in water at the concentration of 2.0 mg/mL, which was stable for several months without any precipitate. This may be ascribed to the electrostatic attraction and [Formula: see text]–[Formula: see text] interaction between CILC and graphene.

Iron in Hydrothermal Clays from the Galapagos Spreading Centre Mounds: Consequences for the Clay Transition Mechanism

Clay Minerals ◽  
1993 ◽  
Vol 28 (4) ◽  
pp. 641-655 ◽  
Author(s):  
M. D. Buatier ◽  
K. Ouyang ◽  
J. P. Sanchez
Keyword(s):  
Electron Microscopy ◽  
Iron Oxide ◽  
Mössbauer Spectra ◽  
Analytical Electron Microscopy ◽  
Secondary Phase ◽  
Precipitation Process ◽  
Mossbauer Spectra ◽  
Octahedral Sites ◽  
Transition Mechanism ◽  
Transmission Electron

AbstractGlauconite and Fe-smectite, which can be distinguished by their peculiar morphology and stacking sequences, coexist in the Galapagos Spreading Centre hydrothermal mounds. Analytical electron microscopy (AEM) data suggest that Fe is entirely in octahedral sites in Fe-smectite whereas glauconite is K-rich with Fe in tetrahedral and octahedral sites. However, the Mossbauer spectra, recorded at various temperatures for samples containing both smectite and glauconite, were satisfactorily analysed with three overlapping doublets corresponding to Fe in octahedral sites. The contradictory results obtained with the two methods are explained by the presence of small particles of iron oxide intimately associated with glauconite. These particles were detected in Mossbauer spectra obtained at 77 K and 4·2 K and were observed by transmission electron microscopy. Iron oxide is a secondary phase formed by alteration of smectite. These data are in good agreement with the hypothesis that the smectite-glauconite reaction, which occurs at 30 m and low temperature in the Galapagos hydrothermal mounds, is a dissolution-precipitation process, dissolution of Fe-rich smectite being followed by precipitation of glauconite and iron oxides.

Sign in / Sign up

Export Citation Format

Share Document