scholarly journals Biomechanical Analysis of the Fixation System for T-Shaped Acetabular Fracture

2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
Yanping Fan ◽  
Jianyin Lei ◽  
Feng Zhu ◽  
Zhiqiang Li ◽  
Weiyi Chen ◽  
...  
Keyword(s):  
Finite Element ◽  
Acetabular Fracture ◽  
Element Model ◽  
Biomechanical Analysis ◽  
Anterior Column ◽  
Acetabular Fractures ◽  
Rigid Fixation ◽  
Optimal Method ◽  
System P ◽  
Fixation System

This study aims to evaluate the biomechanical mechanism of fixation systems in the most frequent T-shaped acetabular fracture using finite element method. The treatment of acetabular fractures was based on extensive clinical experience. Three commonly accepted rigid fixation methods (double column reconstruction plates (P × 2), anterior column plate combined with posterior column screws (P + PS), and anterior column plate combined with quadrilateral area screws (P + QS)) were chosen for evaluation. On the basis of the finite element model, the biomechanics of these fixation systems were assessed through effective stiffness levels, stress distributions, force transfers, and displacements along the fracture lines. All three fixation systems can be used to obtain effective functional outcomes. The third fixation system (P + QS) was the optimal method for T-shaped acetabular fracture. This fixation system may reduce many of the risks and limitations associated with other fixation systems.

scholarly journals Biomechanical characteristics of tibio-femoral joint after partial medial meniscectomy in different flexion angles: a finite element analysis

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Xiaohui Zhang ◽  
Shuo Yuan ◽  
Jun Wang ◽  
Bagen Liao ◽  
De Liang
Keyword(s):  
Finite Element ◽  
Articular Cartilage ◽  
Finite Element Model ◽  
Medial Meniscus ◽  
Lateral Meniscus ◽  
Element Model ◽  
Magnetic Resonance Images ◽  
Biomechanical Analysis ◽  
Joint Stress ◽  
Tibiofemoral Joint

Abstract Background Recent studies have pointed out that arthroscopy, the commonly-used surgical procedure for meniscal tears, may lead to an elevated risk of knee osteoarthritis (KOA). The biomechanical factors of KOA can be clarified by the biomechanical analysis after arthroscopic partial meniscectomy (APM). This study aimed to elucidate the cartilage stress and meniscus displacement of the tibiofemoral joint under flexion and rotation loads after APM. Methods A detailed finite element model of the knee bone, cartilage, meniscus, and major ligaments was established by combining computed tomography and magnetic resonance images. Vertical load and front load were applied to simulate different knee buckling angles. At the same time, by simulating flexion of different degrees and internal and external rotations, the stresses on tibiofemoral articular cartilage and meniscus displacement were evaluated. Results Generally, the contact stress on both the femoral tibial articular cartilage and the meniscus increased with the increased flexion degree. Moreover, the maximum stress on the tibial plateau gradually moved backward. The maximum position shift value of the lateral meniscus was larger than that of the medial meniscus. Conclusion Our finite element model provides a realistic three-dimensional model to evaluate the influence of different joint range of motion and rotating tibiofemoral joint stress distribution. The decreased displacement of the medial meniscus may explain the higher pressure on the knee components. These characteristics of the medial tibiofemoral joint indicate the potential biomechanical risk of knee degeneration.

scholarly journals Comparison of two reinforcement rings for primary total hip arthroplasty addressing displaced acetabular fractures: a biomechanical analysis

2020 ◽  
Vol 140 (12) ◽  
pp. 1947-1954
Author(s):  
Johannes Becker ◽  
M. Winkler ◽  
C. von Rüden ◽  
E. Bliven ◽  
P. Augat ◽  
...  
Keyword(s):  
Acetabular Fracture ◽  
Weight Bearing ◽  
Biomechanical Analysis ◽  
Acetabular Fractures ◽  
Full Weight Bearing ◽  
Acetabular Cup ◽  
Partial Weight Bearing ◽  
Quadrilateral Plate ◽  
Stable Conditions ◽  
Partial Weight

Abstract Introduction Aim of this study was to biomechanically compare two different acetabular cup fixation constructs in terms of fracture fixation for displaced acetabular fractures involving the anterior column with hemitransverse fracture under partial and full weight-bearing conditions. Methods Two different reinforcement rings designed as cages for primary THA were biomechanically tested in terms of managing a complex acetabular fracture. Single-leg stance cyclic loading was performed to assess fracture gap movement and fragment rotation. Twelve hemi pelvis Sawbones were divided into two groups: primary THA with acetabulum roof reinforcement plate (ARRP) (n = 6) and primary THA with Burch–Schneider reinforcement cage (BSRC) (n = 6). Results During loading under partial weight-bearing (250 N) fracture gap movement tended to be larger in the BSRC group as compared to the ARRP group. Under full weight-bearing conditions, the ARRP showed 60% significantly less motion (p = 0.035) of the os ilium to os ischii gap compared to BSRC. Fracture gap movements between the os ilium and spina iliaca fragments were significantly reduced by 76% (p = 0.048) for ARRP in contrast to BSRC. The ARRP group also demonstrated significantly less movement in the fracture gaps os ischii to quadrilateral plate (62% reduction, p = 0.009) and quadrilateral plate to spina iliaca (87% reduction, p < 0.001). Significantly less rotational movement of the quadrilateral plate to the os ilium was exhibited by the ARRP group (p = 0.015). Conclusions The presented acetabulum roof-reinforcement plate (ARRP) provides stable conditions at the acetabular component with adequate stabilization of a displaced acetabular fracture.

scholarly journals Finite element and biomechanical analysis of risk factors for implant failure during tension band plating

2020 ◽  
Vol 48 (11) ◽  
pp. 030006052097207
Author(s):  
Jing Ding ◽  
Fei Wang ◽  
Fangchun Jin ◽  
Zhen-kai Wu ◽  
Pin-quan Shen
Keyword(s):  
Residual Stress ◽  
Finite Element ◽  
Finite Element Model ◽  
Three Dimensional ◽  
Biomechanical Model ◽  
Element Model ◽  
Tension Band ◽  
Biomechanical Analysis ◽  
Implant Failure ◽  
Element Analysis

Objective Tension band plating has recently gained widespread acceptance as a method of correcting angular limb deformities in skeletally immature patients. We examined the role of biomechanics in procedural failure and devised a new method of reducing the rate of implant failure. Methods In the biomechanical model, afterload (static or cyclic) was applied to each specimen. The residual stress of the screw combined with different screw sizes and configurations were measured and compared by X-ray diffraction. With regard to static load and similar conditions, the stress distribution was analyzed according to a three-dimensional finite element model. Results The residual stress was close to zero in the static tension group, whereas it was very high in the cyclic load group. The residual stress of screws was significantly lower in the convergent group and parallel group than in the divergent group. The finite element model showed similar results. Conclusions In both the finite element analysis and biomechanical tests, the maximum stress of the screw was concentrated at the position where the screws enter the cortex. Cyclic loading is the primary cause of implant failure.

scholarly journals Finite Element Analysis and Comparative Study of 4 Kinds of Internal Fixation Systems for Anterior Cervical Discectomy and Fusion in Children

2021 ◽  
Author(s):  
ziyu li ◽  
Jianqiang Zhou ◽  
Zhijun Li ◽  
Shaojie Zhang ◽  
xing wang ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cervical Spine ◽  
Finite Element Model ◽  
Internal Fixation ◽  
Element Model ◽  
Lower Cervical Spine ◽  
Element Analysis ◽  
Internal Fixation System ◽  
Fixation System

Abstract Background: Spinal injury in children usually occurs in the cervical spine region. Anterior fixation of lower cervical spine has been applied in the treatment of pediatric cervical spine injury and disease due to its stable and firm mechanical properties. This study performed finite element analysis and comparison of 4 different anterior cervical internal fixation systems for children, and explored more stable methods of anterior cervical internal fixation in children. Methods: A finite element model of 6-year-old children with lower cervical spine C4/5 discectomy was established, and the self-designed lower cervical spine anterior locking internal fixation system ACBLP and the children’s anterior cervical internal fixation system ACOP, ACVLP, ACSLP plate screws were fixed and loaded on the model. 27.42N•m torque load was applied to each internal fixation model under 6 working conditions of anteflexion, backward flexion, left flexion, right flexion, left rotation and right rotation, to simulate the movement of the cervical spine. The activity and stress distribution cloud diagram of each finite element model was obtained. Results: In the four internal fixation models of ACOP, ACVLP, ACSLP, and ACBLP, the mobility of C4/5 segment basically showed a decreasing relationship, and the mobility of adjacent segments increased significantly. In the Mises stress cloud diagram of the cervical spine of the four models, the vertebral body and accessories of the ACBLP model born the least stress, followed by ACSLP; The steel plate and screws in the ACVLP internal fixation model were the most stressed; The stress of the internal fixation system (plate/screw) in all models increased in the order of ACBLP, ACSLP, ACVLP, and ACOP.Conclusions: ACBLP internal fixation system had obvious advantages in anterior internal fixation of lower cervical spine in children, C4/5 had the smallest degree of movement, relative displacement was minimal, the stress on the pedicle was the least while the stress on the plate screw was relatively the smallest.

scholarly journals A Comparative Biomechanical Analysis of Various Rod Configurations Following Anterior Column Realignment and Pedicle Subtraction Osteotomy

Neurospine ◽  
2021 ◽  
Vol 18 (3) ◽  
pp. 587-596
Author(s):  
Muzammil Mumtaz ◽  
Justin Mendoza ◽  
Ardalan Seyed Vosoughi ◽  
Anthony S. Unger ◽  
Vijay K. Goel
Keyword(s):  
Stress Reduction ◽  
Factor Of Safety ◽  
Maximum Stress ◽  
Element Model ◽  
Pedicle Subtraction Osteotomy ◽  
Biomechanical Analysis ◽  
Anterior Column ◽  
Von Mises Stress ◽  
Correction Technique ◽  
Von Mises

Objective: The objective of this study was to compare the biomechanical differences of different rod configurations following anterior column realignment (ACR) and pedicle subtraction osteotomy (PSO) for an optimal correction technique and rod configuration that would minimize the risk of rod failure.Methods: A validated spinopelvic (L1-pelvis) finite element model was used to simulate ACR at the L3–4 level. The ACR procedure was followed by dual-rod fixation, and for 4-rod constructs, either medial/lateral accessory rods (connected to primary rods) or satellite rods (directly connected to ACR level screws). The range of motion (ROM), maximum von Mises stress on the rods, and factor of safety (FOS) were calculated for the ACR models and compared to the existing literature of different PSO rod configurations.Results: All of the 4-rod ACR constructs showed a reduction in ROM and maximum von Mises stress compared to the dual-rod ACR construct. Additionally, all of the 4-rod ACR constructs showed greater percentage reduction in ROM and maximum von Mises stress compared to the PSO 4-rod configurations. The ACR satellite rod construct had the maximum stress reduction i.e., 47.3% compared to dual-rod construct and showed the highest FOS (4.76). These findings are consistent with existing literature that supports the use of satellite rods to reduce the occurrence of rod fracture.Conclusion: Our findings suggest that the ACR satellite rod construct may be the most beneficial in reducing the risk of rod failure compared to all other PSO and ACR constructs.

Sign in / Sign up

Export Citation Format

Share Document