scholarly journals Mushrooms and Lichens in Bulgarian Ethnomycology

2015 ◽  
Vol 2015 ◽  
pp. 1-7 ◽  
Author(s):  
Blagoy Angelov Uzunov ◽  
Maya Petrova Stoyneva-Gärtner
Keyword(s):  
Field Trip ◽  
Made In

The paper presents ethnomycological data on ritual, medicinal, tinder, and kindling usage of mushrooms and lichens in Bulgaria from prehistoric times till nowadays. It is based on the analysis of 17 ethnomycological sources recently available and on the authors inquiries and field trip data from the country made in the period 1986–2015. In total 18 mushrooms and 4 lichens with their usage are enlisted.

Some items of a Central Newfoundland dialect

1964 ◽  
Vol 10 (1) ◽  
pp. 37-46 ◽  
Author(s):  
J. D. A. Widdowson
Keyword(s):  
Field Trip ◽  
The Other ◽  
Preliminary Survey ◽  
Historical Evidence ◽  
Made In

Although a preliminary survey of the vocabulary and pronunciation of a Central Newfoundland dialect is the chief concern of this paper, some tentative observations about the development of Newfoundland dialect as a whole may perhaps also be put forward here. Both the terms discussed and the observations made are based primarily on a field-trip made in the Summer of 1963 as part of the expanding programme of research in dialect, toponymy, and folklore which is now being carried out at Memorial University. Some of the theoretical points are drawn both from the fieldwork and a sampling of the material available in the University’s Folklore and Dialect Archives. From these sources it would appear that two main speech-groups probably exist in Newfoundland as a whole, one descended from Southern Irish and the other from the English West Country. Historical evidence of settlement in Newfoundland of course supports this, but proof of such a hypothesis as regards the language must await further collecting and more intensive analysis. However, the dialectal differences so far examined seem to indicate that this is the probable pattern.

Field Trip—Kentucky

2018 ◽  
pp. 112-155
Author(s):  
Scott L. Matthews
Keyword(s):  
Abstract Expressionism ◽  
Field Trip ◽  
Private Life ◽  
Eastern Kentucky ◽  
Folk Revival ◽  
Southern Appalachia ◽  
Field Recordings ◽  
Folk Music Revival ◽  
Public Audience ◽  
Made In

This chapter explores the field recordings, films, and photographs John Cohen made in eastern Kentucky during the 1950s and 1960s, particularly of the musician Roscoe Holcomb. It discusses Cohen’s connection to the era’s folk music revival and how his documentary work in the region represented both a break with his predecessors and a continuation of the tradition’s dominant themes. Cohen was motivated by personal desire and aesthetic interests rather than reformism or politics. Under the influence of the modern folk revival, Beat culture, Abstract Expressionism, and existentialism, Cohen created a new documentary ethos and methodology. Yet, he also presented Holcomb and southern Appalachia in a familiar manner. In his photographs, on records such as Mountain Music of Kentucky, and in his film, The High Lonesome Sound, they represented pure tradition, symbols of folk authenticity in an increasingly standardized and commercialized America. This chapter also addresses how Holcomb, and some members of his family, challenged Cohen’s vision of their culture and home, and how Holcomb himself, despite his friendship with Cohen, occasionally resisted Cohen’s attempts to represent his private life for a public audience.

scholarly journals A Survey made in the inner area of Mezőhegyes on choosing the energy raing of the electirical household appliances consciously

2015 ◽  
Vol 9 (2) ◽  
pp. 1-5
Author(s):  
Brigitta Zsótér ◽  
Nándor Domonics
Keyword(s):  
Energy Consumption ◽  
Questionnaire Survey ◽  
Alternative Energy ◽  
Field Trip ◽  
Energy Resources ◽  
Systematic Sampling ◽  
Household Appliances ◽  
The People ◽  
Alternative Energy Resources ◽  
Made In

In this present study we are publishing a part of the results of a survey made in the spring of 2015 which we accomplished among the population living in the inner area of a small town called Mezőhegyes. It was a questionnaire survey connected to a field trip. We chose systematic sampling in making our questionnaire. The objects of the examinations were whether the people living there are conscious in choosing the energy rating of their electrical household appliances and how their energy consumption changed in the last 10 years. What is the most important point when purchasing a new electrical item: the price, the energy rating, the brand, the design or the others’ opinion? Which are the most common household appliances? Do they use alternative energy resources?

Spectrophotometric measurements of objective-prism spectra

1966 ◽  
Vol 24 ◽  
pp. 118-119
Author(s):  
Th. Schmidt-Kaler
Keyword(s):  
Progress Report ◽  
Two Dimensional ◽  
Objective Prism ◽  
Made In

I should like to give you a very condensed progress report on some spectrophotometric measurements of objective-prism spectra made in collaboration with H. Leicher at Bonn. The procedure used is almost completely automatic. The measurements are made with the help of a semi-automatic fully digitized registering microphotometer constructed by Hög-Hamburg. The reductions are carried out with the aid of a number of interconnected programmes written for the computer IBM 7090, beginning with the output of the photometer in the form of punched cards and ending with the printing-out of the final two-dimensional classifications.

Surface Structure in Microtomed Sections Caused by Glass and Diamond Knives

1971 ◽  
Vol 29 ◽  
pp. 456-457
Author(s):  
J. Temple Black ◽  
William G. Boldosser
Keyword(s):  
Plastic Deformation ◽  
Epoxy Resin ◽  
Carbon Coating ◽  
Surface Damage ◽  
Body Angle ◽  
Normal Manner ◽  
Bottom Side ◽  
Cutting Direction ◽  
Made In ◽  
Diamond Knife

Ultramicrotomy produces plastic deformation in the surfaces of microtomed TEM specimens which can not generally be observed unless special preparations are made. In this study, a typical biological composite of tissue (infundibular thoracic attachment) infiltrated in the normal manner with an embedding epoxy resin (Epon 812 in a 60/40 mixture) was microtomed with glass and diamond knives, both with 45 degree body angle. Sectioning was done in Portor Blum Mt-2 and Mt-1 microtomes. Sections were collected on formvar coated grids so that both the top side and the bottom side of the sections could be examined. Sections were then placed in a vacuum evaporator and self-shadowed with carbon. Some were chromium shadowed at a 30 degree angle. The sections were then examined in a Phillips 300 TEM at 60kv.Carbon coating (C) or carbon coating with chrom shadowing (C-Ch) makes in effect, single stage replicas of the surfaces of the sections and thus allows the damage in the surfaces to be observable in the TEM. Figure 1 (see key to figures) shows the bottom side of a diamond knife section, carbon self-shadowed and chrom shadowed perpendicular to the cutting direction. Very fine knife marks and surface damage can be observed.

Iron storage sites in the myocardium as revealed by cytohistochemistry

1988 ◽  
Vol 46 ◽  
pp. 394-395
Author(s):  
M. Ashraf ◽  
F. Thompson ◽  
S. Miki ◽  
P. Srivastava
Keyword(s):  
Cardiac Tissue ◽  
Coronary Perfusion ◽  
Intracellular Iron ◽  
Ether Anesthesia ◽  
Intense Staining ◽  
Iron Storage ◽  
Thin Sections ◽  
Rat Hearts ◽  
Cacodylate Buffer ◽  
Made In

Iron is believed to play an important role in the pathogenesis of ischemic injury. However, the sources of intracellular iron in myocytes are not yet defined. In this study we have attempted to localize iron at various cellular sites of the cardiac tissue with the ferrocyanide technique.Rat hearts were excised under ether anesthesia. They were fixed with coronary perfusion with 3% buffered glutaraldehyde made in 0.1 M cacodylate buffer pH 7.3. Sections, 60 μm in thickness, were cut on a vibratome and were incubated in the medium containing 500 mg of potassium ferrocyanide in 49.5 ml H2O and 0.5 ml concentrated HC1 for 30 minutes at room temperature. Following rinses in the buffer, tissues were dehydrated in ethanol and embedded in Spurr medium.The examination of thin sections revealed intense staining or reaction product in peroxisomes (Fig. 1).

Microanalysis of precipitates in a ferritic steel

1978 ◽  
Vol 36 (1) ◽  
pp. 618-619
Author(s):  
J.M. Titchmarsh
Keyword(s):  
Ferritic Steel ◽  
Particle Identification ◽  
Energy Dispersive ◽  
Objective Lens ◽  
Ferritic Steels ◽  
Replica Technique ◽  
X Ray ◽  
Large Numbers ◽  
Scanning Transmission ◽  
Made In

The advances in recent years in the microanalytical capabilities of conventional TEM's fitted with probe forming lenses allow much more detailed investigations to be made of the microstructures of complex alloys, such as ferritic steels, than have been possible previously. In particular, the identification of individual precipitate particles with dimensions of a few tens of nanometers in alloys containing high densities of several chemically and crystallographically different precipitate types is feasible. The aim of the investigation described in this paper was to establish a method which allowed individual particle identification to be made in a few seconds so that large numbers of particles could be examined in a few hours.A Philips EM400 microscope, fitted with the scanning transmission (STEM) objective lens pole-pieces and an EDAX energy dispersive X-ray analyser, was used at 120 kV with a thermal W hairpin filament. The precipitates examined were extracted using a standard C replica technique from specimens of a 2¼Cr-lMo ferritic steel in a quenched and tempered condition.

AEM investigation of ZrO2 solid solution formation in ZrO2/mullite composites

1984 ◽  
Vol 42 ◽  
pp. 408-409
Author(s):  
T. R. Dinger
Keyword(s):  
Solid Solution ◽  
Ion Beam ◽  
Analytical Electron Microscopy ◽  
Transformation Toughening ◽  
Solid Solution Formation ◽  
Solution Formation ◽  
Propagating Crack ◽  
Analytical Electron ◽  
Microcrack Toughening ◽  
Made In

Zirconia (ZrO2) is often added to ceramic compacts to increase their toughness. The mechanisms by which this toughness increase occurs are generally accepted to be those of transformation toughening and microcracking. The mechanism of transformation toughening is based on the presence of metastable tetragonal ZrO2 which transforms to the monoclinic allotrope when stressed by a propagating crack. The decrease in volume which accompanies this transformation effectively relieves the applied stress at the crack tip and toughens the material; microcrack toughening arises from the deflection of a propagating crack around sharply angular inclusions.These mechanisms, however, do not explain the toughness increases associated with the class of composites investigated here. Analytical electron microscopy (AEM) has been used to determine whether solid solution effects could be the cause of this increased toughness. Specimens of a mullite (3Al2O3·2SiO2) + 15 vol. % ZrO2 were prepared by the usual technique of mechanical thinning followed by ion beam milling. All observations were made in a Philips EM400 TEM/STEM microscope fitted with EDXS and EELS spectrometers.

A study of interface sliding at F.C.C.-B.C.C. boundaries in a Cu-Zn alloy

1978 ◽  
Vol 36 (1) ◽  
pp. 422-423
Author(s):  
F. Monchoux ◽  
A. Rocher ◽  
J.L. Martin
Keyword(s):  
Face Centered Cubic ◽  
Creep Tests ◽  
High Voltage Electron Microscopy ◽  
Diffusion Treatment ◽  
Voltage Electron ◽  
The Face ◽  
Face Centered ◽  
Interface Sliding ◽  
Zn Alloy ◽  
Made In

Interphase sliding is an important phenomenon of high temperature plasticity. In order to study the microstructural changes associated with it, as well as its influence on the strain rate dependence on stress and temperature, plane boundaries were obtained by welding together two polycrystals of Cu-Zn alloys having the face centered cubic and body centered cubic structures respectively following the procedure described in (1). These specimens were then deformed in shear along the interface on a creep machine (2) at the same temperature as that of the diffusion treatment so as to avoid any precipitation. The present paper reports observations by conventional and high voltage electron microscopy of the microstructure of both phases, in the vicinity of the phase boundary, after different creep tests corresponding to various deformation conditions.Foils were cut by spark machining out of the bulk samples, 0.2 mm thick. They were then electropolished down to 0.1 mm, after which a hole with thin edges was made in an area including the boundary

Searching for the causes why some of the paintings by Mihaly Munkacsy are darkening

1990 ◽  
Vol 48 (2) ◽  
pp. 204-205
Author(s):  
Imre Pozsgai ◽  
Klara Erdöhalmi-Torok
Keyword(s):  
Electron Beam ◽  
Cross Section ◽  
Polyester Resin ◽  
National Gallery ◽  
X Ray ◽  
Art Historians ◽  
Made In ◽  
Grinding And Polishing

The paintings by the great Hungarian master Mihaly Munkacsy (1844-1900) made in an 8-9 years period of his activity are deteriorating. The most conspicuous sign of the deterioration is an intensive darkening. We have made an attempt by electron beam microanalysis to clarify the causes of the darkening. The importance of a study like this is increased by the fact that a similar darkening can be observed on the paintings by Munkacsy’s contemporaries e.g Courbet and Makart. A thick brown mass the so called bitumen used by Munkacsy for grounding and also as a paint is believed by the art historians to cause the darkening.For this study, paint specimens were taken from the following paintings: “Studio”, “Farewell” and the “Portrait of the Master’s Wife”, all of them are the property of the Hungarian National Gallery. The paint samples were embedded in a polyester resin “Poly-Pol PS-230” and after grinding and polishing their cross section was used for x-ray mapping.

Sign in / Sign up

Export Citation Format

Share Document