scholarly journals Map-Based Channel Model for Urban Macrocell Propagation Scenarios

2015 ◽  
Vol 2015 ◽  
pp. 1-5 ◽  
Author(s):  
Jose F. Monserrat ◽  
Saúl Inca ◽  
Jordi Calabuig ◽  
David Martín-Sacristán
Keyword(s):  
Channel Model ◽  
New Technology ◽  
Simulation Models ◽  
Test Cases ◽  
Actual Behavior ◽  
Research Projects ◽  
Channel Models ◽  
Common Definition ◽  
Proposed Model ◽  
Definition Of

The evolution of LTE towards 5G has started and different research projects and institutions are in the process of verifying new technology components through simulations. Coordination between groups is strongly recommended and, in this sense, a common definition of test cases and simulation models is needed. The scope of this paper is to present a realistic channel model for urban macrocell scenarios. This model is map-based and takes into account the layout of buildings situated in the area under study. A detailed description of the model is given together with a comparison with other widely used channel models. The benchmark includes a measurement campaign in which the proposed model is shown to be much closer to the actual behavior of a cellular system. Particular attention is given to the outdoor component of the model, since it is here where the proposed approach is showing main difference with other previous models.

Microsoft Corp.: Branding and Positioning .NET

2017 ◽  
pp. 1-27
Author(s):  
Mohanbir Sawhney ◽  
Brian Buenneke ◽  
Lisa Jackson ◽  
Lisa Kulick ◽  
Nancy Kulick ◽  
...  
Keyword(s):  
New Technology ◽  
Public Understanding ◽  
Value Proposition ◽  
Branding Strategy ◽  
Business Decision ◽  
Software Products ◽  
Common Definition ◽  
A Value ◽  
Umbrella Branding ◽  
Definition Of

John Williams, senior director of marketing for Microsoft's .NET, was trying to build the .NET brand, a comprehensive family of next-generation connectivity software products. Highlights the challenges of branding and positioning a complex technology offering. The first challenge facing Microsoft was to develop a common definition of .NET, which had been in flux over the prior two years. The second challenge was to choose between an umbrella branding strategy, a sub-branding strategy, and an ingredient branding strategy. The third challenge was to create a value proposition that would appeal to three very different target audiences: business decision makers, IT professionals, and developers.To analyze the branding and positioning of a complex new technology offering: by defining a new product offering for public understanding and comprehension; evaluating brand strategies for optimal effect, considering possible hurdles to implementation of each strategy; and developing a value proposition attractive to differing audiences.

scholarly journals Taking Personality to the Next Level: What Does It Mean to Know a Person?

2016 ◽  
Author(s):  
Robert Edmund Wilson ◽  
Simine Vazire
Keyword(s):  
New Technology ◽  
Empirical Work ◽  
Personality Psychology ◽  
Common Definition ◽  
Dynamic Level ◽  
Research Questions ◽  
And Behaviors ◽  
Definition Of ◽  
New Research ◽  
The Stranger

What does it mean to know a person? In his famous article, McAdams (1995) addresses this question from the perspective of personality psychology and concludes that personality traits are “the psychology of the stranger.” To really know someone, you need to know more than just how they typically think, feel, and behave on average (a common definition of traits). You need to know how their thoughts, feelings, and behaviors change depending on their role and context, why those fluctuations occur (the underlying motives and causes of those patterns), and how they make sense of their own patterns over time (their life narrative). In this essay, we argue that although there has been little empirical work on within-person fluctuations in personality, the time is ripe to examine these patterns. New technology has made it possible to quantify momentary thoughts, feelings, and behaviors, and to track the contextual factors that underlie these fluctuations (i.e., “personality signatures”). By capturing individual differences at this dynamic level, we can gain a better understanding of how people differ from one another. This will also open the door to new research questions, such as investigating the amount of insight people have into their own and others' personality signatures.

A study of practice based design research models from knowledge integration perspective

2019 ◽  
Vol 1 (1) ◽  
Author(s):  
Honghai LI ◽  
Jun CAI
Keyword(s):  
Knowledge Production ◽  
Theoretical Basis ◽  
Knowledge Integration ◽  
Design Research ◽  
Research Process ◽  
Two Dimensions ◽  
Design Knowledge ◽  
Research Projects ◽  
Proposed Model ◽  
Design Innovation

The transformation of China's design innovation industry has highlighted the importance of design research. The design research process in practice can be regarded as the process of knowledge production. The design 3.0 mode based on knowledge production MODE2 has been shown in the Chinese design innovation industry. On this cognition, this paper establishes a map with two dimensions of how knowledge integration occurs in practice based design research, which are the design knowledge transfer and contextual transformation of design knowledge. We use this map to carry out the analysis of design research cases. Through the analysis, we define four typical practice based design research models from the viewpoint of knowledge integration. This method and the proposed model can provide a theoretical basis and a path for better management design research projects.

SIMILARITIES AND DIFFERENT FEATURES OF HAND GESTURES IN AMERICAN AND KYRGYZ CULTURES

2019 ◽  
pp. 19-22
Author(s):  
Avtandil kyzy Ya
Keyword(s):  
Everyday Life ◽  
Facial Expressions ◽  
Main Part ◽  
Body Language ◽  
Hand Gestures ◽  
Common Definition ◽  
The World ◽  
The Common ◽  
Definition Of ◽  
Different Cultures

Abstract: This paper highlights similarities and different features of the category of kinesics “hand gestures”, its frequency usage and acceptance by different individuals in two different cultures. This study shows its similarities, differences and importance of the gestures, for people in both cultures. Consequently, kinesics study was mentioned as a main part of body language. As indicated in the article, the study kinesics was not presented in the Kyrgyz culture well enough, though Kyrgyz people use hand gestures a lot in their everyday life. The research paper begins with the common definition of hand gestures as a part of body language, several handshake categories like: the finger squeeze, the limp fish, the two-handed handshake were explained by several statements in the English and Kyrgyz languages. Furthermore, this article includes definitions and some idioms containing hand, shake, squeeze according to the Oxford and Academic Dictionary to show readers the figurative meanings of these common words. The current study was based on the books of writers Allan and Barbara Pease “The definite book of body language” 2004, Romana Lefevre “Rude hand gestures of the world”2011 etc. Key words: kinesics, body language, gestures, acoustics, applause, paralanguage, non-verbal communication, finger squeeze, perceptions, facial expressions. Аннотация. Бул макалада вербалдык эмес сүйлѳшүүнүн бѳлүгү болуп эсептелген “колдордун жандоо кыймылы”, алардын эки башка маданиятта колдонулушу, айырмачылыгы жана окшош жактары каралган. Макаланын максаты болуп “колдордун жандоо кыймылынын” мааниси, айырмасы жана эки маданиятта колдонулушу эсептелет. Ошону менен бирге, вербалдык эмес сүйлѳшүүнүн бѳлүгү болуп эсептелген “кинесика” илими каралган. Берилген макалада кѳрсѳтүлгѳндѳй, “кинесика” илими кыргыз маданиятында толугу менен изилденген эмес, ошого карабастан “кинесика” илиминин бѳлүгү болуп эсептелген “колдордун жандоо кыймылы” кыргыз элинин маданиятында кѳп колдонулат. Андан тышкары, “колдордун жандоо кыймылынын” бир нече түрү, англис жана кыргыз тилдеринде ма- селен аркылуу берилген.Тѳмѳнкү изилдѳѳ ишин жазууда чет элдик жазуучулардын эмгектери колдонулду. Түйүндүү сѳздѳр: кинесика, жандоо кыймылы, акустика,кол чабуулар, паралингвистика, вербалдык эмес баарлашуу,кол кысуу,кабыл алуу сезими. Аннотация. В данной статье рассматриваются сходства и различия “жестикуляции” и частота ее использования, в американской и кыргызской культурах. Следовательно, здесь было упомянуто понятие “кинесика” как основная часть языка тела. Как указано в статье, “кинесика” не была представлена в кыргызской культуре достаточно хорошо, хотя кыргызский народ часто использует жестикуляцию в повседневной жизни. Исследовательская работа начинается с общего определения “жестикуляции” как части языка тела и несколько категорий жестикуляции, таких как: сжатие пальца, слабое рукопожатие, рукопожатие двумя руками, были объяснены несколькими примерами на английском и кыргызском языках. Кроме того, эта статья включает определения слов “рука”, “рукопожатие”, “сжатие” и некоторые идиомы, содержащие данных слов согласно Оксфордскому и Академическому словарю, чтобы показать читателям их образное значение. Данное исследование было основано на книгах писателей Аллана и Барбары Пиз «Определенная книга языка тела» 2004 года, Романа Лефевра «Грубые жестикуляции мира» 2011 года и т.д. Ключевые слова: кинесика, язык жестов, жесты, акустика, аплодисменты, паралингвистика, невербальная коммуникация, сжатие пальца, чувство восприятия, выражение лиц.

MIMO Systems in a Composite Fading and Generalized Noise Scenario: A Review

2020 ◽  
Vol 14 ◽  
Author(s):  
Keerti Tiwari
Keyword(s):  
System Performance ◽  
Performance Enhancement ◽  
Channel Model ◽  
Mimo Systems ◽  
Mimo System ◽  
Spatial Diversity ◽  
Spatial Multiplexing ◽  
Channel Models ◽  
Efficient System ◽  
Composite Channel

: Multiple-input multiple-output (MIMO) systems have been endorsed to enable future wireless communication requirements. The efficient system designing appeals an appropriate channel model, that considers all the dominating effects of wireless environment. Therefore, some complex or less analytically acquiescent composite channel models have been proposed typically for single-input single-output (SISO) systems. These models are explicitly employed for mobile applications, though, we need a specific study of a model for MIMO system which can deal with radar clutters and different indoor/outdoor and mobile communication environments. Subsequently, the performance enhancement of MIMO system is also required in such scenario. The system performance enhancement can be examined by low error rate and high capacity using spatial diversity and spatial multiplexing respectively. Furthermore, for a more feasible and practical system modeling, we require a generalized noise model along with a composite channel model. Thus, all the patents related to MIMO channel models are revised to achieve the near optimal system performance in real world scenario. This review paper offers the methods to improve MIMO system performance in less and severe fading as well as shadowing environment and focused on a composite Weibull-gamma fading model. The development is the collective effects of selecting the appropriate channel models, spatial multiplexing/detection and spatial diversity techniques both at the transmitter and the receivers in the presence of arbitrary noise.

Semantic Health Mediation and Access Control Manager for Interoperability Among Healthcare Systems

2018 ◽  
Vol 11 (4) ◽  
pp. 87-98
Author(s):  
Abdullah Alamri
Keyword(s):  
Medical Information ◽  
Clinical Information ◽  
Healthcare Systems ◽  
Patient Data ◽  
Dual Model ◽  
Healthcare Organizations ◽  
Reference Information ◽  
Proposed Model ◽  
Definition Of ◽  
Semantic Mediation

Healthcare systems have evolved to become more patient-centric. Many efforts have been made to transform paper-based patient data to automated medical information by developing electronic healthcare records (EHRs). Several international EHRs standards have been enabling healthcare interoperability and communication among a wide variety of medical centres. It is a dual-model methodology which comprises a reference information model and an archetype model. The archetype is responsible for the definition of clinical concepts which has limitations in terms of supporting complex reasoning and knowledge discovery requirements. The objective of this article is to propose a semantic-mediation architecture to support semantic interoperability among healthcare organizations. It provides an intermediate semantic layer to exploit clinical information based on richer ontological representations to create a “model of meaning” for enabling semantic mediation. The proposed model also provides secure mechanisms to allow interoperable sharing of patient data between healthcare organizations.

scholarly journals A line-of-sight channel model for the 100–450 gigahertz frequency band

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Joonas Kokkoniemi ◽  
Janne Lehtomäki ◽  
Markku Juntti
Keyword(s):  
Channel Model ◽  
Full Range ◽  
Line Of Sight ◽  
Absorption Loss ◽  
Radio Communication ◽  
International Telecommunication Union ◽  
International Telecommunication ◽  
Fifth Generation ◽  
Proposed Model ◽  
Actual Response

AbstractThis paper documents a simple parametric polynomial line-of-sight channel model for 100–450 GHz band. The band comprises two popular beyond fifth generation (B5G) frequency bands, namely, the D band (110–170 GHz) and the low-THz band (around 275–325 GHz). The main focus herein is to derive a simple, compact, and accurate molecular absorption loss model for the 100–450 GHz band. The derived model relies on simple absorption line shape functions that are fitted to the actual response given by complex but exact database approach. The model is also reducible for particular sub-bands within the full range of 100–450 GHz, further simplifying the absorption loss estimate. The proposed model is shown to be very accurate by benchmarking it against the exact response and the similar models given by International Telecommunication Union Radio Communication Sector. The loss is shown to be within ±2 dBs from the exact response for one kilometer link in highly humid environment. Therefore, its accuracy is even much better in the case of usually considered shorter range future B5G wireless systems.

Influence of Clearances and Thermal Effects on the Dynamic Behavior of Gear-Hydrodynamic Journal Bearing Systems

2013 ◽  
Vol 135 (6) ◽  
Author(s):  
R. Fargère ◽  
P. Velex
Keyword(s):  
Degrees Of Freedom ◽  
Integration Scheme ◽  
Time Step ◽  
Specific Element ◽  
Normal Contact ◽  
Contact Algorithm ◽  
Gear Teeth ◽  
Proposed Model ◽  
Elastic Couplings ◽  
Definition Of

A global model of mechanical transmissions is introduced which deals with most of the possible interactions between gears, shafts, and hydrodynamic journal bearings. A specific element for wide-faced gears with nonlinear time-varying mesh stiffness and tooth shape deviations is combined with shaft finite elements, whereas the bearing contributions are introduced based on the direct solution of Reynolds' equation. Because of the large bearing clearances, particular attention has been paid to the definition of the degrees-of-freedom and their datum. Solutions are derived by combining a time step integration scheme, a Newton–Raphson method, and a normal contact algorithm in such a way that the contact conditions in the bearings and on the gear teeth are simultaneously dealt with. A series of comparisons with the experimental results obtained on a test rig are given which prove that the proposed model is sound. Finally, a number of results are presented which show that parameters often discarded in global models such as the location of the oil inlet area, the oil temperature in the bearings, the clearance/elastic couplings interactions, etc. can be influential on static and dynamic tooth loading.

Settings, Experimentation and Evaluation of the Simulation Models

2013 ◽  
Vol 309 ◽  
pp. 366-371 ◽  
Author(s):  
František Manlig ◽  
Radek Havlik ◽  
Alena Gottwaldova
Keyword(s):  
Simulation Model ◽  
New Technology ◽  
Simulation Models ◽  
Manufacturing Processes ◽  
Customer Requirements ◽  
Evaluation Functions ◽  
Operational Management ◽  
Minimum Number ◽  
User Friendly ◽  
Setting Parameters

This paper deals with research in computer simulation of manufacturing processes. The paper summarizes the procedures associated with developing the model, experimenting with and evaluating the model results. The key area is of experimentation with the simulation model and evaluation using indicators or multi-criteria functions. With regards to the experiment the crucial variables are the simulation model. The key ideas are to set the number of variables, depending on what a given simulation will be. For example, when introducing new technology into production, modify the type of warehouse, saving workers, thus economizing. The simulation models for the operational management uses simplified models, if possible, a minimum number of variables to obtain the result in shortest possible time. These models are more user friendly and the course will be conducted mostly in the background. An example of a criteria function is the number of parts produced or production time. Multi-criteria function has given us the opportunity to make better quality decisions. It is based on the composition of several parameters, including their weight to one end point. The type of evaluation functions, whether it is an indicator or criteria function is selected and based on customer requirements. In most cases it is recommended to use the multi-dimensional function. It gives us a more comprehensive view of the results from the model and facilitates decision-making. The result of this paper is a display of setting parameters for the experimentation on a sample model. Furthermore, the comparisons of results with a multi-criteria objective function and one-criterion indicator.

Development and Evaluation of Enhanced Airfield Signage for Temporary Information

2017 ◽  
Vol 2626 (1) ◽  
pp. 66-73
Author(s):  
Gaël Le Bris
Keyword(s):  
Human Factors ◽  
Situational Awareness ◽  
Weak Link ◽  
Advisory Council ◽  
Parallel Study ◽  
Research Projects ◽  
Charles De Gaulle ◽  
Definition Of ◽  
De Gaulle ◽  
Construction Works

The aviation community has faced several accidents and incidents on infrastructures and procedures temporarily modified for the purpose of construction works. The analysis of these events shows that usual means of communication to the air crews are the weak link of the safety chain. To address the key challenge of situational awareness during construction works, the Airport Construction Advisory Council of FAA and Paris–Charles de Gaulle Airport (Paris-CDG) developed and evaluated with the airfield community, from 2011 to 2016, an innovative aviation signage. Parallel and complementary studies in human factors led to the definition of specifications for a temporary information signage, also called orange construction sign. Paris-CDG focused on the development of specific messages for each one of the major hazards that could require an increased situational awareness of the air crews during taxiing and takeoff. The results of the evaluation conducted by FAA were published in September 2015. The purpose of this paper is to present the parallel study performed by the author at Paris-CDG with the coalition of the airside operations stakeholders. Both research projects are convergent and confirm the relevance of the orange sign concept for increasing the situational awareness and preventing safety events during airfield construction.

Sign in / Sign up

Export Citation Format

Share Document