scholarly journals A Theorem for Finding Maximum Temperature in Wet Grinding

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
J. L. González-Santander ◽  
G. Martín
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Temperature Field ◽  
Integral Form ◽  
Stationary Regime ◽  
Time Dependent ◽  
Maximum Temperature ◽  
Theoretical Computation ◽  
Constant Heat ◽  
Workpiece Surface

We consider the solutions found in the literature for heat transfer in surface grinding, assuming a constant heat transfer coefficient for the coolant acting on the workpiece surface and a constant or linear heat flux profiles entering into the workpiece. From the integral form of the time-dependent temperature field reached in the workpiece, assuming the previous conditions, we prove that the maximum temperature always occurs in the stationary regime on the workpiece surface within the contact zone between the wheel and the workpiece. This result assures a very rapid method for the theoretical computation of the maximum temperature.

scholarly journals Maximum Temperature and Relaxation Time in Wet Surface Grinding for a General Heat Flux Profile

2016 ◽  
Vol 2016 ◽  
pp. 1-14 ◽  
Author(s):  
J. L. González-Santander
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Relaxation Time ◽  
Surface Grinding ◽  
Maximum Temperature ◽  
Fast Method ◽  
Workpiece Surface ◽  
Friction Zone ◽  
Flux Profile ◽  
Wet Surface

We solve the boundary-value problem of the heat transfer modeling in wet surface grinding, considering a constant heat transfer coefficient over the workpiece surface and a general heat flux profile within the friction zone between wheel and workpiece. We particularize this general solution to the most common heat flux profiles reported in the literature, that is, constant, linear, parabolic, and triangular. For these cases, we propose a fast method for the numerical computation of maximum temperature, in order to avoid the thermal damage of the workpiece. Also, we provide a very efficient method for the numerical evaluation of the transient regime duration (relaxation time).

scholarly journals Efficient Series Expansions of the Temperature Field in Dry Surface Grinding for Usual Heat Flux Profiles

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Juan Luis González-Santander
Keyword(s):  
Heat Flux ◽  
Temperature Field ◽  
Numerical Evaluation ◽  
Numerical Procedure ◽  
Constant Heat Flux ◽  
Surface Grinding ◽  
Maximum Temperature ◽  
Series Expansions ◽  
Constant Heat ◽  
Flux Profile

In the framework of Jaeger’s model for heat transfer in dry surface grinding, series expansions for calculating the temperature field, assuming constant, linear, triangular, and parabolic heat flux profiles entering into the workpiece, are derived. The numerical evaluation of these series is considerably faster than the numerical integration of Jaeger’s formula and as accurate as the latter. Also, considering a constant heat flux profile, a numerical procedure is proposed for the computation of the maximum temperature as a function of the Peclet number and the depth below the surface. This numerical procedure has been used to evaluate the accuracy of Takazawa’s approximation.

Heat Transfer Analysis of Laminar Pulsating Flow in a Rectangular Channel Using Infrared Thermography

2021 ◽  
Author(s):  
Richard Blythman ◽  
Sajad Alimohammadi ◽  
Nicholas Jeffers ◽  
Darina B. Murray ◽  
Tim Persoons
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Analytical Solution ◽  
Local Time ◽  
Rectangular Channel ◽  
Pulsating Flow ◽  
Time Dependent ◽  
Heat Transfer Analysis ◽  
Flux Boundary Condition ◽  
Hydrodynamic Behaviour

Abstract While numerous applied studies have successfully demonstrated the feasibility of unsteady cooling solutions, a consensus has yet to be reached on the local instantaneous conditions that result in heat transfer enhancement. The current work aims to experimentally validate a recent analytical solution (on a local time-dependent basis) for the common flow condition of a fully-developed incompressible pulsating flow in a uniformly-heated vessel. The experimental setup is found to approximate the ideal constant heat flux boundary condition well, especially for the decoupled unsteady scenario where the amplitude of the most significant secondary contributions (capacitance and lateral conduction) amounts to 1.2% and 0.2% of the generated heat flux, respectively. Overall, the experimental measurements for temperature and heat flux oscillations are found to coincide well with a recent analytical solution to the energy equation by the authors. Furthermore, local time-dependent heat flux enhancements and degradations are observed to be qualitatively similar to those of wall shear stress from a previous study, suggesting that the thermal performance is indeed influenced by hydrodynamic behaviour.

scholarly journals Spatiotemporal distribution of the temperature field inside the thin heated foil during impacting liquid spray

2021 ◽  
Vol 2119 (1) ◽  
pp. 012171
Author(s):  
V V Cheverda ◽  
T G Gigola ◽  
P M Somwanshi
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Temperature Field ◽  
Heat Transfer Coefficient ◽  
Infrared Image ◽  
Image Sequence ◽  
Spatiotemporal Distribution ◽  
Average Heat Transfer Coefficient ◽  
Average Heat ◽  
Liquid Spray

Abstract The spatiotemporal distribution of the temperature inside a constantan foil during impacting spray is resolved experimentally in the present work. The received infrared image sequence will be used to find the local and average heat transfer coefficient of the foil. In the future, the results obtained will be used to calculate the heat flux in the region of the contact line of each drop.

Sign in / Sign up

Export Citation Format

Share Document