scholarly journals Synthesis and Characterization of CdS/TiO2-Montmorillonite Nanocomposite with Enhanced Visible-Light Absorption

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Feng-shan Zhou ◽  
Dai-mei Chen ◽  
Bao-lin Cui ◽  
Wei-heng Wang
Keyword(s):  
Visible Light ◽  
Light Absorption ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
Cds Nanoparticles ◽  
X Ray Diffraction ◽  
Visible Light Absorption ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Adsorption Desorption

Sodium montmorillonite (MMT) was chosen as the carrier; a serial of CdS/TiO2-MMT nanocomposites with enhanced visible-light absorption ability was prepared by hydrothermal synthesis method combination with semiconductor compound modification method. The samples are characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and ultraviolet visible (UV-Vis) spectroscopy; the results showed that TiO2and CdS nanoparticles were loaded on the surface of montmorillonite uniformly. N2adsorption-desorption experiment showed that the specific surface area of TiO2/montmorillonite nanocomposite made by this method can reach 200 m2/g and pore-size distribution was from 4 to 6 nm; UV-Vis showed that the recombination of CdS and TiO2enhanced visible-light absorption ability of samples of TiO2/montmorillonite and visible-light absorption ability increase with the increased of the adsorption of CdS.

FeYO3@rGO nanocomposites: Synthesis, characterization and application in photooxidative degradation of atrazine under visible light

2021 ◽  
Vol 11 (5) ◽  
pp. 706-716
Author(s):  
Nada D. Al-Khthami ◽  
Tariq Altalhi ◽  
Mohammed Alsawat ◽  
Mohamed S. Amin ◽  
Yousef G. Alghamdi ◽  
...  
Keyword(s):  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
Bandgap Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Reduced Graphene ◽  
Structural Surface ◽  
Adsorption Desorption

Different organic pollutants have been remediated photo catalytically by applying perovskite photocatalysts. Atrazine (ATR) is a pesticide commonly detected as a pollutant in drinking, surface and ground water. Herein, FeYO3@rGO heterojunction was synthesized and applied for photooxidation decomposition of ATR. First, FeYO 3nanoparticles (NPs) were prepared via routine sol-gel. After that, FeYO3 NPs were successfully incorporated with different percentages (5, 10, 15 and 20 wt.%) of reduced graphene oxide (rGO) in the synthesis of novel FeYO3@rGO photocatalyst. Morphological, structural, surface, optoelectrical and optical characteristics of constructed materials were identified via X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Transmission electron microscopy (TEM), adsorption/desorption isotherms, diffusive reflectance (DR) spectra, and photoluminescence response (PL). Furthermore, photocatalytic achievement of the constructed materials was evaluated via photooxidative degradation of ATR. Various investigations affirmed the usefulness of rGO incorporation on the advancement of formed photocatalysts. Actually, novel nanocomposite containing rGO (15 wt.%) possessed diminished bandgap energy, as well as magnified visible light absorption. Furthermore, such nanocomposite presented exceptional photocatalytic achievement when exposed to visible light as ATR was perfectly photooxidized over finite amount (1.6 g · L-1) from the optimized photocatalyst when illuminated for 30 min. The advanced photocatalytic performance of constructed heterojunctions could be accredited mainly to depressed recombination amid induced charges. The constructed FeYO3@rGO nanocomposite is labelled as efficient photocatalyst for remediation of herbicides from aquatic environments.

scholarly journals Novel Route to Obtain Carbon Self-Doped TiO2 Mesoporous Nanoparticles as Efficient Photocatalysts for Environmental Remediation Processes under Visible Light

Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3349 ◽  
Author(s):  
Pablo A. Ochoa Rodríguez ◽  
Tamara B. Benzaquén ◽  
Gina A. Pecchi ◽  
Sandra G. Casuscelli ◽  
Verónica R. Elías ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Environmental Remediation ◽  
Synthesis Method ◽  
Mesoporous Structure ◽  
Acid Orange 7 ◽  
X Ray Diffraction ◽  
Visible Radiation ◽  
X Ray ◽  
Transmission Electron ◽  
Adsorption Desorption

Titanium dioxide materials were synthesized using two different methods. The samples were characterized by X-ray diffraction (XRD), UV–Visible diffusion reflectance spectroscopy (UV-Vis DR), Raman spectroscopy, N2 adsorption/desorption, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron spectroscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Although both kind of materials were found to have mesoporous structure and anatase crystalline phase, one of them was obtained from a synthesis method that does not involve the use of surfactants, and therefore, does not require calcination at high temperatures. This implies that the synthesized solid was self-doped with carbon species, coming only from the same source used for titanium. Then, the relationship between the presence of these species, the final calcination temperature, and the photocatalytic activity of the solids was studied in terms of the degradation and mineralization of an Acid Orange 7 aqueous solution, under visible radiation. A photosensitizing effect caused by the non-metal presence, that allows the solid to extend its absorption range, was found. Hence, a novel route to prepare C-modified photoactive mesoporous TiO2, simpler and cheaper, where neither a template nor an external carbon source is used, could be performed.

scholarly journals Exfoliated Molybdenum Disulfide Encapsulated in a Metal Organic Framework for Enhanced Photocatalytic Hydrogen Evolution

Catalysts ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 89 ◽  
Author(s):  
Ren Ren ◽  
Huilei Zhao ◽  
Xiaoyu Sui ◽  
Xiaoru Guo ◽  
Xingkang Huang ◽  
...  
Keyword(s):  
Hydrogen Production ◽  
Visible Light ◽  
Light Absorption ◽  
Photoelectron Spectroscopy ◽  
Metal Organic Framework ◽  
Visible Light Absorption ◽  
X Ray ◽  
Metal Organic ◽  
Direct Band ◽  
Bulk Mos2

An exfoliated MoS2 encapsulated into metal-organic frameworks (MOFs) was fabricated as a promising noble-metal-free photocatalyst for hydrogen production under visible light irradiation. The as-synthesized samples were examined by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), and Brunauer–Emmett–Teller (BET) surface analysis. It is well known that bulk MoS2 is unsuitable for photocatalysis due to its inadequate reduction and oxidation capabilities. However, exfoliated MoS2 exhibits a direct band gap of 2.8 eV due to quantum confinement, which enables it to possess suitable band positions and retain a good visible-light absorption ability. As a result, it is considered to be an encouraging candidate for photocatalytic applications. Encapsulating exfoliated MoS2 into MOF demonstrates an improved visible light absorption ability compared to pure MOF, and the highest hydrogen production rate that the encapsulated exfoliated MoS2 could reach was 68.4 μmol h-1g-1, which was much higher than that of pure MOF. With a suitable band structure and improved light-harvesting ability, exfoliated MoS2@MOF could be a potential photocatalyst for hydrogen production.

Effect of Chromium Doping on Visible Light Absorption of Nanosized Titania Sol-Gel

2009 ◽  
Vol 5 ◽  
pp. 95-104 ◽  
Author(s):  
J.A. Pedraza-Avella ◽  
R. López ◽  
F. Martínez-Ortega ◽  
E.A. Páez-Mozo ◽  
Ricardo Gómez
Keyword(s):  
Visible Light ◽  
Light Absorption ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflectance Spectroscopy ◽  
Anatase Phase ◽  
Sol Gel ◽  
Visible Light Absorption ◽  
X Ray ◽  
Chromium Doping ◽  
Doped Titania

Visible light absorption of TiO2 can be induced by the addition of transition metal impurities. However, many dissimilar results have been reported about this subject and there are various interpretations about the origin of these absorption features. In this work, samples of chromium-doped titania (TiO2-Cr) with different dopant contents (0.1, 0.5, 1.0 and 5.0 wt. %) were prepared by a sol-gel method. Their particle size was determined by dynamic light scattering and it was on the nanometer scale (18 nm). X-ray powder diffraction and Raman spectroscopy showed only the presence of anatase phase in all samples. X-ray photoelectron spectroscopy reveals that the oxidation state of chromium in the prepared materials is different than in the dopant precursor. This change can be associated to the oxidative gelling conditions used in the materials preparation. UV VIS diffuse reflectance spectroscopy showed that the chromium doping, until 1.0 wt. %, did not effectively narrow the TiO2 band-gap but it induces the visible light absorption probably through the formation of color centers.

Preparation and Photocatalytic Activity of N-TiO2/Sepiolite Nanocomposite

2011 ◽  
Vol 694 ◽  
pp. 85-90
Author(s):  
Dai Mei Chen ◽  
Hai Peng Ji ◽  
Jian Xin Wang ◽  
Jian Chen ◽  
Zheng Ming Wu ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Methylene Blue Degradation ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Photocatalytic Reactions ◽  
Nitrogen Contents

To utilize visible light and separate of TiO2 nanoparticles more efficiently in photocatalytic reactions, nitrogen doped TiO2/sepiolite composites (N-TiO2/sep) with different nitrogen contents were prepared by a sol-gel method and characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and UV-vis spectroscopy. XRD showed that anatase-TiO2 nanoparticles were loaded on the surface of sepiolite. XPS revealed that N atoms could incorporate into the lattice of anatase TiO2 substituting the sites of oxygen atoms. UV-vis spectroscopy showed that the visible light absorption of N-TiO2/sep samples decreased with the increase of calciantion temperature and increased with the increase of N content. The photocatalytic activities of obtained N-TiO2/sep samples were evaluated by methylene blue degradation under visible light irradiation. It was found that the N-TiO2/sep samples had the higher photocatalytic activity than that of TiO2/sep.

scholarly journals Hydrogen treated anatase TiO2: a new experimental approach and further insights from theory

2016 ◽  
Vol 4 (7) ◽  
pp. 2670-2681 ◽  
Author(s):  
Manan Mehta ◽  
Nisha Kodan ◽  
Sandeeep Kumar ◽  
Akshey Kaushal ◽  
Leonhard Mayrhofer ◽  
...  
Keyword(s):  
Visible Light ◽  
Ab Initio ◽  
Light Absorption ◽  
Photoelectron Spectroscopy ◽  
Experimental Approach ◽  
Anatase Tio2 ◽  
Hydrogen Annealing ◽  
Visible Light Absorption ◽  
X Ray

Vacuum hydrogen annealing of TiO2 leads to increased visible light absorption. The origin thereof was revealed by ab initio calculations and X-ray photoelectron spectroscopy.

Impact of Rutile Fraction on TiO2 Visible-Light Absorption and Visible-Light-Induced Photocatalytic Activity

2018 ◽  
Author(s):  
David Maria Tobaldi ◽  
Luc Lajaunie ◽  
ana caetano ◽  
nejc rozman ◽  
Maria Paula Seabra ◽  
...  
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Light Absorption ◽  
Solid Phase ◽  
Diffraction Method ◽  
Band Alignment ◽  
Quantitative Phase Analysis ◽  
Transmission Microscopy ◽  
Visible Light Absorption ◽  
X Ray

<div>Titanium dioxide is by far the most utilised semiconductor material for photocatalytic applications. Still, it is transparent to visible-light. Recently, it has been proved that a type-II band alignment for the rutile−anatase mixture would improve its visible-light absorption.</div><div>In this research paper we thoroughly characterised the real crystalline and amorphous phases of synthesised titanias – thermally treated at different temperatures to get distinct ratios of anatase-rutile-amorphous fraction – as well as that of three commercially available photocatalytic nano-TiO2. </div><div>The structural characterisation was done via advanced X-ray diffraction method, namely the Rietveld-RIR method, to attain a full quantitative phase analysis of the specimens. The microstructure was also investigated via an advanced X-ray method, the whole powder pattern modelling. These methods were validated combining advanced aberration-corrected scanning transmission microscopy and high-resolution electron energy-loss spectroscopy. The photocatalytic activity was assessed in the liquid- and gas-solid phase (employing rhodamine B and 4-chlorophenol, and isopropanol, respectively, as the organic substances to degrade) using a light source irradiating exclusively in the visible-range.</div><div>Optical spectroscopy showed that even a small fraction of rutile (2 wt%) is able to shift to lower energies the apparent optical band gap of an anatase-rutile mixed phase. But is this enough to attain a real photocatalytic activity promoted by merely visible-light?</div><div>We tried to give a reply to that question.</div><div>Photocatalytic activity results in the liquid-solid phase showed that a high surface hydroxylation led to specimen with superior visible light-induced catalytic activity (i.e. dye and ligand-to-metal charge transfer complexes sensitisation effects). That is: not photocatalysis <i>sensu-strictu</i>.</div><div>On the other hand, the gas-solid phase results showed that a higher amount of the rutile fraction (around 10 wt%), together with less recombination of the charge carriers, were more effective for an actual photocatalytic oxidation of isopropanol.</div>

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

Preparation of Visible-Light-Responsive TiO2-xNx Photocatalyst by a Very Simple Method

2011 ◽  
Vol 383-390 ◽  
pp. 3188-3191
Author(s):  
Han Jie Huang ◽  
Wen Long She ◽  
Ling Wen Yang ◽  
Hai Peng Huang
Keyword(s):  
Photocatalytic Activity ◽  
Visible Light ◽  
Photoelectron Spectroscopy ◽  
Diffuse Reflection ◽  
Ammonia Solution ◽  
Reflection Spectra ◽  
X Ray Diffraction ◽  
Simple Method ◽  
X Ray ◽  
Light Excitation

A visible-light-responsive TiO2-xNx photocatalyst was prepared by a very simple method. Ammonia solution was used as nitrogen resource in this paper. The TiO2-xNx photocatalyst was characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), UV-Vis diffuse reflection spectra (DRS), and X-ray photoelectron spectroscopy (XPS). The ethylene was selected as a target pollutant under visible light excitation to evaluate the activity of this photocatalyst. The new prepared TiO2-xNx photocatalyst with strong photocatalytic activity under visible light irradiation was demonstrated in the experiment.

Synthesis of Visible-Light Responsive CdS/ZnO Nanocomposite Photocatalysts via Simple Precipitation Method

2014 ◽  
Vol 608 ◽  
pp. 224-229 ◽  
Author(s):  
Potjanaporn Chaengchawi ◽  
Karn Serivalsatit ◽  
Pornapa Sujaridworakun
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Photocatalytic Performance ◽  
Precipitation Method ◽  
Cds Nanoparticles ◽  
Methylene Blue Solution ◽  
X Ray Diffraction ◽  
X Ray ◽  
Blue Solution ◽  
Scanning Electron

A visible-light responsive CdS/ZnO nanocomposite photocatalyst was successfully synthesized by precipitation of CdS nanoparticles, using Cd (NO3)2 and Na2S as starting materials, on ZnO nanoparticles and then calcined at 400°C for 2 hours. The effects of the mole ratio of CdS and ZnO in the composites on their phase, morphology, and surface area were investigated by X-ray Diffraction (XRD), scanning electron microscope (SEM), Brunauer Emmett Teller method (BET), respectively. The photocatalytic degradation of methylene blue solution in the presence of composite products under visible-light irradiation was investigated. The results showed that the mole ratio of CdS and ZnO played a significant role on photocatalytic performance. The highest photocatalytic activity was obtained from the CdS/ZnO nanocomposite with mole ratio of 1:4, which is higher than that of pure CdS and pure ZnO.

Sign in / Sign up

Export Citation Format

Share Document