scholarly journals Electrodeposition of Mesoporous Co3O4Nanosheets on Carbon Foam for High Performance Supercapacitors

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Zhemi Xu ◽  
Adnan Younis ◽  
Dewei Chu ◽  
Zhimin Ao ◽  
Haolan Xu ◽  
...  
Keyword(s):  
High Performance ◽  
Carbon Foam ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Electrochemical Tests ◽  
Capacitive Behavior ◽  
Scan Rate ◽  
Potential Applications ◽  
Naoh Solution ◽  
Maximum Specific Capacitance

Metal oxide nanosheets have promising potential applications in novel energy storage devices. In this work, Co3O4nanosheets/carbon foam with excellent supercapacitor characteristics was successfully fabricated, without using metal substrates. The experimental results demonstrate that the electrochemical tests showed that the as-prepared Co3O4nanosheets exhibited an ideal capacitive behavior with a maximum specific capacitance of 106 F/g in 1 M NaOH solution at a scan rate of 0.1 V s−1.

scholarly journals WO3Nanowires on Graphene Sheets as Negative Electrode for Supercapacitors

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Bo Liu ◽  
Yan Wang ◽  
Hong-Wu Jiang ◽  
Ben-Xue Zou
Keyword(s):  
High Performance ◽  
Negative Electrode ◽  
Graphene Sheets ◽  
Potential Range ◽  
Energy Storage Devices ◽  
Positive Electrodes ◽  
Voltage Range ◽  
Storage Devices ◽  
High Area ◽  
Potential Applications

WO3nanowires directly grown on graphene sheets have been fabricated by using a seed-mediated hydrothermal method. The morphologies and electrochemical performance of WO3films prepared by different process were studied. The results show that the precoated nanoseeds and graphene sheets on graphite electrode provide more reactive centers for the nucleation and formation of uniform WO3nanowires. The WO3nanowires electrode exhibits a high area specific capacitance of 800 mF cm−2over negative potential range from −1.0 V to 0 V versus SCE in 1 M Li2SO4solution. A high performance electrochemical supercapacitor assembled with WO3nanowires as negative electrode and PANI/MnO2as positive electrodes over voltage range of 1.6 V displays a high volumetric capacitance of 2.5 F cm−3, which indicate great potential applications of WO3nanowires on graphene sheets as negative electrode for energy storage devices.

scholarly journals Synthesis and Morphology Control of Nanoporous Cu2O/Cu and Their Application as Electrode Materials for Capacitors

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 340 ◽  
Author(s):  
Yuanwei Li ◽  
Xueyang Zhao ◽  
Hui Liu ◽  
Wei Li ◽  
Xiaojian Wang
Keyword(s):  
High Performance ◽  
Electrode Materials ◽  
Acid Solutions ◽  
Porous Structures ◽  
Composite Electrodes ◽  
Energy Storage Devices ◽  
Discharge Performance ◽  
Storage Devices ◽  
Nanoporous Copper ◽  
Potential Applications

In this paper, nanoporous copper (NPC) was prepared by dealloying ZrCuAl metallic glass ribbons with HF acid solutions. The effect of dealloying time on the porous structures and thickness of the obtained NPC films was investigated. It was found that the ligament sizes of the NPC could be tuned in a range from 20 to 300 nm, and the thicknesses of the NPC films from 3.1 to 14.4 μm, with properly selected dealloying times. Furthermore, nanoporous composites made of NPC and nanoporous Cu2O were prepared by oxidizing the NPC with ethanol. The nanoporous composite electrodes exhibited superior charge-discharge performance and would have broad potential applications in flexible high-performance energy storage devices.

scholarly journals Effect of Time on a Hierarchical Corn Skeleton-Like Composite of CoO@ZnO as Capability Electrode Material for High Specific Performance Supercapacitors

2018 ◽  
Author(s):  
Anil Kumar Yedluri ◽  
Hee-Je Kim
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Energy Storage Devices ◽  
X Ray ◽  
Storage Devices ◽  
Transmission Electron ◽  
Potential Applications ◽  
Oxygen Groups ◽  
Cbd Method

CoO-ZnO-based composites have attracted considerable attention for the development of energy storage devices because of their multifunctional characterization and ease of integration with existing components. This paper reports the synthesis of CoO@ZnO (CZ) nanostructures on Ni foam by the CBD method for facile and eco-friendly supercapacitor applications. The formation of a CoO@ZnO electrode functioned with cobalt, zinc, nickel and oxygen groups was confirmed by X-ray diffraction, X-ray photoelectron spectroscopy, low and high-resolution of scanning electron microscopy, and transmission electron microscopy. The as-synthesized hierarchical nanocorn skeleton-like structure of CoO@ZnO-3h (CZ3h) electrode delivered a higher specific capacitance of 1136 F/g at a current density of 3 A/g with outstanding cycling stability, showing 98.3% capacitance retention over 3000 cycles in an aqueous 2 M KOH electrolyte solution. This retention was significantly better than that of other prepared electrodes, such as CoO (CO), ZnO (ZO), CoO@ZnO-1h (CZ1h), and CoO@ZnO-7h (CZ7h) (274, 383, 240 and 537 F/g, respectively). This superior capacitance was attributed to the ideal surface morphology of CZ3h, which is responsible for the rapid electron/ion transfer between the electrolyte and electrode surface area. The enhanced features of the CZ3h electrode highlight potential applications in high performance supercapacitors, solar cells, photocatalysis, and electrocatalysis.

scholarly journals Observation and theoretical calculations of voltage-induced large magnetocapacitance beyond 330% in MgO-based magnetic tunnel junctions

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kentaro Ogata ◽  
Yusuke Nakayama ◽  
Gang Xiao ◽  
Hideo Kaiju
Keyword(s):  
High Performance ◽  
Tunnel Junctions ◽  
Theoretical Calculations ◽  
Magnetic Tunnel Junctions ◽  
Magnetic Sensors ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Potential Applications ◽  
Experimental Findings ◽  
Large Tunnel

AbstractMagnetic tunnel junctions (MTJs) in the field of spintronics have received enormous attention owing to their fascinating spin phenomena for fundamental physics and potential applications. MTJs exhibit a large tunnel magnetoresistance (TMR) at room temperature. However, TMR depends strongly on the bias voltage, which reduces the magnitude of TMR. On the other hand, tunnel magnetocapacitance (TMC), which has also been observed in MTJs, can be increased when subjecting to a biasing voltage, thus exhibiting one of the most interesting spin phenomena. Here we report a large voltage-induced TMC beyond 330% in MgO-based MTJs, which is the largest value ever reported for MTJs. The voltage dependence and frequency characteristics of TMC can be explained by the newly proposed Debye-Fröhlich model using Zhang-sigmoid theory, parabolic barrier approximation, and spin-dependent drift diffusion model. Moreover, we predict that the voltage-induced TMC ratio could reach over 3000% in MTJs. It is a reality now that MTJs can be used as capacitors that are small in size, broadly ranged in frequencies and controllable by a voltage. Our theoretical and experimental findings provide a deeper understanding on the exact mechanism of voltage-induced AC spin transports in spintronic devices. Our research may open new avenues to the development of spintronics applications, such as highly sensitive magnetic sensors, high performance non-volatile memories, multi-functional spin logic devices, voltage controlled electronic components, and energy storage devices.

Mixed ternary metal MFeCo (M = Al, Mg, Cu, Zn, or Ni) oxide electrodes for high-performance energy storage devices

Ionics ◽  
2021 ◽  
Author(s):  
Morteza Saghafi Yazdi ◽  
Seied Ali Hosseini ◽  
Zeynodin Karami ◽  
Ali Olamaee ◽  
Mohammad Abedini ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Oxide Electrodes ◽  
Ternary Metal ◽  
Ni Oxide

scholarly journals Oxygen-Deficient Stannic Oxide/Graphene for Ultrahigh-Performance Supercapacitors and Gas Sensors

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 372
Author(s):  
Liyang Lin ◽  
Susu Chen ◽  
Tao Deng ◽  
Wen Zeng
Keyword(s):  
Energy Storage ◽  
Gas Sensors ◽  
High Performance ◽  
Gas Sensing ◽  
Synthesis Method ◽  
Rate Capability ◽  
Stannic Oxide ◽  
Energy Storage Devices ◽  
Graphene Nanocomposites ◽  
Storage Devices

The metal oxides/graphene nanocomposites have great application prospects in the fields of electrochemical energy storage and gas sensing detection. However, rational synthesis of such materials with good conductivity and electrochemical activity is the topical challenge for high-performance devices. Here, SnO2/graphene nanocomposite is taken as a typical example and develops a universal synthesis method that overcome these challenges and prepares the oxygen-deficient SnO2 hollow nanospheres/graphene (r-SnO2/GN) nanocomposite with excellent performance for supercapacitors and gas sensors. The electrode r-SnO2/GN exhibits specific capacitance of 947.4 F g−1 at a current density of 2 mA cm−2 and of 640.0 F g−1 even at 20 mA cm−2, showing remarkable rate capability. For gas-sensing application, the sensor r-SnO2/GN showed good sensitivity (~13.8 under 500 ppm) and short response/recovering time toward methane gas. These performance features make r-SnO2/GN nanocomposite a promising candidate for high-performance energy storage devices and gas sensors.

scholarly journals Layered double hydroxide membrane with high hydroxide conductivity and ion selectivity for energy storage device

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jing Hu ◽  
Xiaomin Tang ◽  
Qing Dai ◽  
Zhiqiang Liu ◽  
Huamin Zhang ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Ion Selectivity ◽  
Storage Device ◽  
Hydroxyl Groups ◽  
Flow Battery ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Ions Transport ◽  
Double Hydroxides

AbstractMembranes with fast and selective ions transport are highly demanded for energy storage devices. Layered double hydroxides (LDHs), bearing uniform interlayer galleries and abundant hydroxyl groups covalently bonded within two-dimensional (2D) host layers, make them superb candidates for high-performance membranes. However, related research on LDHs for ions separation is quite rare, especially the deep-going study on ions transport behavior in LDHs. Here, we report a LDHs-based composite membrane with fast and selective ions transport for flow battery application. The hydroxide ions transport through LDHs via vehicular (standard diffusion) & Grotthuss (proton hopping) mechanisms is uncovered. The LDHs-based membrane enables an alkaline zinc-based flow battery to operate at 200 mA cm−2, along with an energy efficiency of 82.36% for 400 cycles. This study offers an in-depth understanding of ions transport in LDHs and further inspires their applications in other energy-related devices.

Catalytic Separator with Co–N–C Nanoreactor for High-Performance Lithium-Sulfur Batteries

2021 ◽  
Author(s):  
Longtao Ren ◽  
Qian Wang ◽  
Yajie Li ◽  
Cejun Hu ◽  
Yajun Zhao ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
High Performance ◽  
Next Generation ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
Lithium Sulfur Batteries ◽  
Lithium Sulfur

Rechargeable lithium-sulfur (Li–S) batteries are considered one of the most promising next-generation energy storage devices because of their high theoretical energy density. However, the dissolution of lithium polysulfides (LiPSs) in...

Sign in / Sign up

Export Citation Format

Share Document