scholarly journals Star-Delta Switches Evaluation for Use in Grid-Connected Wind Farm Installations

2014 ◽  
Vol 6 ◽  
pp. 893183
Author(s):  
Panagiota Fokianou ◽  
Maria Samarakou ◽  
Dionisis Kandris ◽  
Emmanouil D. Fylladitakis
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
Wind Farm ◽  
Rotation Velocity ◽  
External Factors ◽  
Mechanical Parts ◽  
Voltage Output ◽  
Permanent Rotation ◽  
Internal And External Factors

Electrical generators are designed to perform best under permanent rotation velocity and fixed loads conditions. However, such ideal conditions are not practically feasible during the operation of real wind turbines. Generally, the voltage output of electrical generators can be regulated without redesigning the electrical or/and mechanical parts constituting such a system, by simply changing the connection of the generator to the grid from Star to Delta or by using combined windings. The present work attempts to investigate the behavior of grid-connected wind turbines with Star-Delta, Delta, and Star connection switches in a variety of simulation scenarios, by taking into consideration the influence of both internal and external factors such as the inertia factor and the wind speed.

scholarly journals Performance Enhancement of Proposed Namaacha Wind Farm by Minimising Losses Due to the Wake Effect: A Mozambican Case Study

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4291
Author(s):  
Paxis Marques João Roque ◽  
Shyama Pada Chowdhury ◽  
Zhongjie Huan
Keyword(s):  
Wind Speed ◽  
Wind Power ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Wind Farms ◽  
Operating Conditions ◽  
Wake Effect ◽  
Wind Generators ◽  
Wind Potential

District of Namaacha in Maputo Province of Mozambique presents a high wind potential, with an average wind speed of around 7.5 m/s and huge open fields that are favourable to the installation of wind farms. However, in order to make better use of the wind potential, it is necessary to evaluate the operating conditions of the turbines and guide the independent power producers (IPPs) on how to efficiently use wind power. The investigation of the wind farm operating conditions is justified by the fact that the implementation of wind power systems is quite expensive, and therefore, it is imperative to find alternatives to reduce power losses and improve energy production. Taking into account the power needs in Mozambique, this project applied hybrid optimisation of multiple energy resources (HOMER) to size the capacity of the wind farm and the number of turbines that guarantee an adequate supply of power. Moreover, considering the topographic conditions of the site and the operational parameters of the turbines, the system advisor model (SAM) was applied to evaluate the performance of the Vestas V82-1.65 horizontal axis turbines and the system’s power output as a result of the wake effect. For any wind farm, it is evident that wind turbines’ wake effects significantly reduce the performance of wind farms. The paper seeks to design and examine the proper layout for practical placements of wind generators. Firstly, a survey on the Namaacha’s electricity demand was carried out in order to obtain the district’s daily load profile required to size the wind farm’s capacity. Secondly, with the previous knowledge that the operation of wind farms is affected by wake losses, different wake effect models applied by SAM were examined and the Eddy–Viscosity model was selected to perform the analysis. Three distinct layouts result from SAM optimisation, and the best one is recommended for wind turbines installation for maximising wind to energy generation. Although it is understood that the wake effect occurs on any wind farm, it is observed that wake losses can be minimised through the proper design of the wind generators’ placement layout. Therefore, any wind farm project should, from its layout, examine the optimal wind farm arrangement, which will depend on the wind speed, wind direction, turbine hub height, and other topographical characteristics of the area. In that context, considering the topographic and climate features of Mozambique, the study brings novelty in the way wind farms should be placed in the district and wake losses minimised. The study is based on a real assumption that the project can be implemented in the district, and thus, considering the wind farm’s capacity, the district’s energy needs could be met. The optimal transversal and longitudinal distances between turbines recommended are 8Do and 10Do, respectively, arranged according to layout 1, with wake losses of about 1.7%, land utilisation of about 6.46 Km2, and power output estimated at 71.844 GWh per year.

scholarly journals Evaluation of the Wind Potential and Optimal Design of a Wind Farm in The Arzew Industrial Zone in Western Algeria

2020 ◽  
Vol 9 (2) ◽  
pp. 177-187
Author(s):  
Salah Marih ◽  
Leila Ghomri ◽  
Benaissa Bekkouche
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
Wind Farm ◽  
Clean Energy ◽  
Appropriate Technology ◽  
Environmental Study ◽  
Net Energy ◽  
Electricity Grid ◽  
Wind Potential ◽  
Mean Wind Speed

This work presents an assessment of the wind potential and a design methodology for a 10 MW wind farm in the Arzew industrial region, located in northwest Algeria, to improve the quality of service of the electricity grid and increase Algeria's participation in the use of renewable energy. The hourly wind data of 10 years (2005-2015) that correspond to the wind potential of the site were analyzed, such as: dominant wind directions, probability distribution, Weibull parameters, mean wind speed and power potential. The site has a mean annual wind speed of 4.46 m/s at 10m height, and enough space to locate the wind turbines. A comparative study was carried out between four wind turbine technologies to improve the site's efficiency and select the appropriate technology: PowerWind 56/ 900 kW, Nordex N50/800 kW, Vestas V50/850 kW, NEG-Micon 44/750 kW. The estimate of the energy produced using WAsP software and the choice of the optimal architectural configuration for wind turbines installation was confirmed. A techno-economic and environmental study was carried out by HOMER software, to choose the model that produces the maximum annual net energy with a competitive cost in the global wind energy market, $ 0.068/kWh, and that provides clean energy with a reduced emission of polluting gases. Finally, this work provides a good indicator for the construction of a wind farm in Arzew. ©2020. CBIORE-IJRED. All rights reserved

scholarly journals Wake and Turbulence Analysis for Wind Turbine Layouts in an Island

2018 ◽  
Vol 64 ◽  
pp. 06010
Author(s):  
Bachhal Amrender Singh ◽  
Vogstad Klaus ◽  
Lal Kolhe Mohan ◽  
Chougule Abhijit ◽  
Beyer Hans George
Keyword(s):  
Wind Speed ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Production ◽  
Wind Farm ◽  
Full Length Paper ◽  
Turbulence Analysis ◽  
Wake Model ◽  
Wind Resources

There is a big wind energy potential in supplying the power in an island and most of the islands are off-grid. Due to the limited area in island(s), there is need to find appropriate layout / location for wind turbines suited to the local wind conditions. In this paper, we have considered the wind resources data of an island in Trøndelag region of the Northern Norway, situated on the coastal line. The wind resources data of this island have been analysed for wake losses and turbulence on wind turbines for determining appropriate locations of wind turbines in this island. These analyses are very important for understanding the fatigue and mechanical stress on the wind turbines. In this work, semi empirical wake model has been used for wake losses analysis with wind speed and turbine spacings. The Jensen wake model used for the wake loss analysis due to its high degree of accuracy and the Frandsen model for characterizing the turbulent loading. The variations of the losses in the wind energy production of the down-wind turbine relative to the up-wind turbine and, the down-stream turbulence have been analysed for various turbine distances. The special emphasis has been taken for the case of wind turbine spacing, leading to the turbulence conditions for satisfying the IEC 61400-1 conditions to find the wind turbine layout in this island. The energy production of down-wind turbines has been decreased from 2 to 20% due to the lower wind speeds as they are located behind up-wind turbine, resulting in decreasing the overall energy production of the wind farm. Also, the higher wake losses have contributed to the effective turbulence, which has reduced the overall energy production from the wind farm. In this case study, the required distance for wind turbines have been changed to 6 rotor diameters for increasing the energy gain. From the results, it has been estimated that the marginal change in wake losses by moving the down-stream wind turbine by one rotor diameter distance has been in the range of 0.5 to 1% only and it is insignificant. In the full-length paper, the wake effects with wind speed variations and the wind turbine locations will be reported for reducing the wake losses on the down-stream wind turbine. The Frandsen model has been used for analysing turbulence loading on the down-stream wind turbine as per IEC 61400-1 criteria. In larger wind farms, the high turbulence from the up-stream wind turbines increases the fatigues on the turbines of the wind farm. In this work, we have used the effective turbulence criteria at a certain distance between up-stream and down-stream turbines for minimizing the fatigue load level. The sensitivity analysis on wake and turbulence analysis will be reported in the full-length paper. Results from this work will be useful for finding wind farm layouts in an island for utilizing effectively the wind energy resources and electrification using wind power plants.

Wind energy resource assessment of Kütahya, Turkey using WAsP and layout optimization

2020 ◽  
pp. 095765092093603
Author(s):  
Onur Koşar ◽  
Mustafa Arif Özgür
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
Wind Farm ◽  
Real Life ◽  
Energy Resource ◽  
Resource Assessment ◽  
Capacity Factor ◽  
Strong Wind ◽  
Wind Potential ◽  
Shear Turbulence

Kütahya is considered as a candidate region for a wind farm investment due to Turkey's 2023 energy targets and its proximity to other wind farm investments. In this study, two years of wind data collected from a hill near the Evliya Çelebi Campus of Kütahya Dumlupınar University was used to evaluate the wind farm potential of Kütahya. First, the wind speed, wind direction, wind shear, turbulence intensity and wind speed ramp characteristics were determined. Second, the WAsP software was used to create a wind atlas for the region. Three sites with strong wind potential were evaluated. A techno-economic analysis was conducted using five types of wind turbines selected from the WAsP database. Third, optimization of a wind farm layout was conducted by considering different hub height options for 14 commercial wind turbines using MATLAB software. It was shown theoretically that a wind farm with a power capacity of 25 MW can operate with a capacity factor of 35%. However, due to the relatively high topographical ruggedness index on the wind farm site, the calculated value for the capacity factor could not be reached in a real-life application.

scholarly journals Results from a wake-steering experiment at a commercial wind plant: investigating the wind speed dependence of wake-steering performance

2021 ◽  
Vol 6 (6) ◽  
pp. 1427-1453
Author(s):  
Eric Simley ◽  
Paul Fleming ◽  
Nicolas Girard ◽  
Lucas Alloin ◽  
Emma Godefroy ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Direction ◽  
Wind Farm ◽  
Poor Performance ◽  
Power Production ◽  
Wind Rose ◽  
Wind Speeds ◽  
Variability Model

Abstract. Wake steering is a wind farm control strategy in which upstream wind turbines are misaligned with the wind to redirect their wakes away from downstream turbines, thereby increasing the net wind plant power production and reducing fatigue loads generated by wake turbulence. In this paper, we present results from a wake-steering experiment at a commercial wind plant involving two wind turbines spaced 3.7 rotor diameters apart. During the 3-month experiment period, we estimate that wake steering reduced wake losses by 5.6 % for the wind direction sector investigated. After applying a long-term correction based on the site wind rose, the reduction in wake losses increases to 9.3 %. As a function of wind speed, we find large energy improvements near cut-in wind speed, where wake steering can prevent the downstream wind turbine from shutting down. Yet for wind speeds between 6–8 m/s, we observe little change in performance with wake steering. However, wake steering was found to improve energy production significantly for below-rated wind speeds from 8–12 m/s. By measuring the relationship between yaw misalignment and power production using a nacelle lidar, we attribute much of the improvement in wake-steering performance at higher wind speeds to a significant reduction in the power loss of the upstream turbine as wind speed increases. Additionally, we find higher wind direction variability at lower wind speeds, which contributes to poor performance in the 6–8 m/s wind speed bin because of slow yaw controller dynamics. Further, we compare the measured performance of wake steering to predictions using the FLORIS (FLOw Redirection and Induction in Steady State) wind farm control tool coupled with a wind direction variability model. Although the achieved yaw offsets at the upstream wind turbine fall short of the intended yaw offsets, we find that they are predicted well by the wind direction variability model. When incorporating the expected yaw offsets, estimates of the energy improvement from wake steering using FLORIS closely match the experimental results.

scholarly journals An Innovative Correction Method of Wind Speed for Efficiency Evaluation of Wind Turbines

ACTA IMEKO ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 46
Author(s):  
Alessio Carullo ◽  
Alessandro Ciocia ◽  
Gabriele Malgaroli ◽  
Filippo Spertino
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
Wind Farm ◽  
Southern Italy ◽  
Wind Farms ◽  
Correction Method ◽  
Turbine Rotor ◽  
Meteorological Station ◽  
Efficiency Evaluation ◽  
Horizontal Axis Wind Turbines

The performance of horizontal axis Wind Turbines (WTs) is strongly affected by the wind speed entering in their rotor. Generally, this quantity is not available, because the wind speed is measured on the nacelle behind the turbine rotor, providing a lower value. Therefore, two correction methods are usually employed, requiring two input quantities: the wind speed on the back of the turbine nacelle and the wind speed measured by a meteorological mast close to the turbines under analysis. However, the presence of this station in wind farms is rare and the number of WTs in the wind farm is high. This paper proposes an innovative correction, named “Statistical Method” (SM), that evaluates the efficiency of WTs by estimating the wind speed entering in the WTs rotor. This method relies on the manufacturer power curve and the data measured by the WT anemometer only, thus having the possibility to be also applied in wind farms without a meteorological station. The effectiveness of such a method is discussed by comparing the results obtained by the standard methods implemented on two turbines (rated power = 1.5 MW and 2.5 MW) of a wind power plant (nominal power = 80 MW) in Southern Italy.

scholarly journals Results from a Wake Steering Experiment at a Commercial Wind Plant: Investigating the Wind Speed Dependence of Wake Steering Performance

2021 ◽  
Author(s):  
Eric Simley ◽  
Paul Fleming ◽  
Nicolas Girard ◽  
Lucas Alloin ◽  
Emma Godefroy ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Direction ◽  
Wind Farm ◽  
Poor Performance ◽  
Power Production ◽  
Wind Rose ◽  
Wind Speeds ◽  
Variability Model

Abstract. Wake steering is a wind farm control strategy in which upstream wind turbines are misaligned with the wind to redirect their wakes away from downstream turbines, thereby increasing the net wind plant power production and reducing fatigue loads generated by wake turbulence. In this paper, we present results from a wake steering experiment at a commercial wind plant involving two wind turbines spaced 3.7 rotor diameters apart. During the three-month experiment period, we estimate that wake steering reduced wake losses by 5.7 % for the wind direction sector investigated. After applying a long-term correction based on the site wind rose, the reduction in wake losses increases to 9.8 %. As a function of wind speed, we find large energy improvements near cut-in wind speed, where wake steering can prevent the downstream wind turbine from shutting down. Yet for wind speeds between 6–8 m/s, we observe little change in performance with wake steering. However, wake steering was found to improve energy production significantly for below-rated wind speeds from 8–12 m/s. By measuring the relationship between yaw misalignment and power production using a nacelle lidar, we attribute much of the improvement in wake steering performance at higher wind speeds to a significant reduction in the power loss of the upstream turbine as wind speed increases. Additionally, we find higher wind direction variability at lower wind speeds, which contributes to poor performance in the 6–8 m/s wind speed bin because of slow yaw controller dynamics. Further, we compare the measured performance of wake steering to predictions using the FLORIS (FLOw Redirection and Induction in Steady State) wind farm control tool coupled with a wind direction variability model. Although the achieved yaw offsets at the upstream wind turbine fall short of the intended yaw offsets, we find that they are predicted well by the wind direction variability model. When incorporating the predicted achieved yaw offsets, estimates of the energy improvement from wake steering using FLORIS closely match the experimental results.

scholarly journals Analysis of the Implementation of the Primary and/or Inertial Frequency Control in Variable Speed Wind Turbines in an Isolated Power System with High Renewable Penetration. Case Study: El Hierro Power System

Electronics ◽  
2020 ◽  
Vol 9 (6) ◽  
pp. 901 ◽  
Author(s):  
Guillermo Martínez-Lucas ◽  
José Ignacio Sarasúa ◽  
Juan Ignacio Pérez-Díaz ◽  
Sergio Martínez ◽  
Danny Ochoa
Keyword(s):  
Wind Speed ◽  
Power Systems ◽  
Power System ◽  
Wind Turbines ◽  
Wind Farm ◽  
Frequency Control ◽  
Frequency Regulation ◽  
Variable Speed ◽  
El Hierro

With high levels of wind energy penetration, the frequency response of isolated power systems is more likely to be affected in the event of a sudden frequency disturbance or fluctuating wind conditions. In order to minimize excessive frequency deviations, several techniques and control strategies involving Variable Speed Wind Turbines (VSWTs) have been investigated in isolated power systems. In this paper, the main benefits and disadvantages of introducing VSWTs—both their inertial contribution and primary frequency regulation—in an exclusively renewable isolated power system have been analyzed. Special attention has been paid to the influence of the delays of control signals in the wind farm when VSWTs provide primary regulation as well as to the wind power reserve value which is needed. To achieve this objective, a methodology has been proposed and applied to a case study: El Hierro power system. A mathematical dynamic model of the isolated power system, including exclusively renewable technologies, has been described. Representative generation schedules and wind speed signals have been fixed according to the observed system. Finally, in order to obtain conclusions, realistic system events such as fluctuations in wind speed and the outage of the generation unit with the higher assigned power in the power system have been simulated.

Assessment of the noise produced by wind farms with the acoustically analogous techniques without stopping the noise source

2018 ◽  
Vol 43 (2) ◽  
pp. 201-209
Author(s):  
Gino Iannace ◽  
Amelia Trematerra ◽  
Umberto Berardi
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Noise Source ◽  
Sound Field ◽  
Wind Farms ◽  
Sound Level ◽  
Acoustic Measurements ◽  
Relative Contribution

In Italy, wind turbines with a nominal power below 1 MW can be installed following simplified authorization procedures and are therefore becoming the preferred choice for promoters. The assessment of the noise of wind farms is not easy, due to economic reasons, with it being difficult to stop and assess the relative contribution of each wind turbine. Several acoustic measurements were taken inside homes located near a wind farm consisting of three wind turbines, each with a nominal power of 1 MW. The acoustic measurements were taken by placing sound level meters inside the houses at different wind speed values and wind directions. The acoustic measurements were taken using the acoustically analogous place technique. For economic reasons, the plant cannot be switched off. In this case, the sound field generated by the operation of the wind turbines was measured by placing two sound level meters in a house.

Sign in / Sign up

Export Citation Format

Share Document