scholarly journals Copper Oxide Nanoparticles for Advanced Refrigerant Thermophysical Properties: Mathematical Modeling

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
S. A. Fadhilah ◽  
R. S. Marhamah ◽  
A. H. M. Izzat
Keyword(s):  
Mathematical Modeling ◽  
Heat Transfer ◽  
Copper Oxide ◽  
Heat Transfer Rate ◽  
Thermophysical Properties ◽  
Transfer Rate ◽  
Copper Oxide Nanoparticles ◽  
Working Fluid ◽  
Refrigeration System ◽  
R 134A

In modern days, refrigeration systems are important for industrial and domestic applications. The systems consume more electricity as compared to other appliances. The refrigeration systems have been investigated thoroughly in many ways to reduce the energy consumption. Hence, nanorefrigerant which is one kind of nanofluids has been introduced as a superior properties refrigerant that increased the heat transfer rate in the refrigeration system. Many types of materials could be used as the nanoparticles to be suspended into the conventional refrigerants. In this study, the effect of the suspended copper oxide (CuO) nanoparticles into the 1,1,1,2-tetrafluoroethane, R-134a is investigated by using mathematical modeling. The investigation includes the thermal conductivity, dynamic viscosity, and heat transfer rate of the nanorefrigerant in a tube of evaporator. The results show enhanced thermophysical properties of nanorefrigerant compared to the conventional refrigerant. These advanced thermophysical properties increased the heat transfer rate in the tube. The nanorefrigerant could be a potential working fluid to be used in the refrigeration system to increase the heat transfer characteristics and save the energy usage.

Study on Heat Transfer Characteristics of Loop Heat Pipe for Solar Collector

2012 ◽  
Author(s):  
Shota Sato ◽  
Shigeki Hirasawa ◽  
Tsuyoshi Kawanami ◽  
Katsuaki Shirai
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Heat Transfer Rate ◽  
Solar Collector ◽  
Transfer Rate ◽  
Thermal Conductance ◽  
Filling Ratio ◽  
Working Fluid ◽  
Loop Heat Pipe ◽  
Single Tube

We experimentally study the thermal conductance of single-tube and loop heat pipes for a solar collector. The evaporator of the heat pipe is 1 m long, 6 mm in diameter and has 30° inclination. The thermal conductance is defined as the heat transfer rate divided by the temperature difference between the evaporator-wall and the condenser-wall. Effects of heat transfer rate, saturation temperature of the working fluid, liquid filling ratio, inclination angle, and position of the evaporator on the thermal conductance are examined. We found that the thermal conductance of the 30°-inclined loop heat pipe with an upper-evaporator is 40–50 (W/K), which is 1.8 times higher than that of the vertical loop type and 3 times higher than that of the single-tube type. Thus, the inclined loop heat pipe is preferable for a solar collector. There is an optimum liquid filling ratio. When the liquid filling ratio is too small, a dry-out portion appears in the evaporator. When the liquid filling ratio is too large, the liquid flows in the condenser to decrease heat transfer area. Also we numerically analyze the thermal conductance of a vertical loop heat pipe.

scholarly journals EFFECT OF OIL ON HEAT TRANSFER OF MIXED REFRIGERANT BOILING IN EVAPORATOR TUBES IN REFRIGERATION MACNINES

2019 ◽  
pp. 88-93
Author(s):  
Alexey Vasilievich Ezhov ◽  
Sergey Sergeevich Ivanov ◽  
Aleksandr Bukin ◽  
Vladimir Grigorievich Bukin
Keyword(s):  
Heat Transfer ◽  
Heat Exchange ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Flow Boiling ◽  
Working Fluid ◽  
Transfer Coefficients ◽  
Two Phase ◽  
Pipe Length ◽  
Heat Transfer Coefficients

The paper presents the results of an experimental study of the effect of oil on the heat transfer rate at boiling of mixed refrigerant R406A. Since the air conditioning system is not a pure refrigerant, but a mixture of oil with a concentration of up to 8%, such an amount of oil affects both hydrodynamics and heat exchange in the evaporators. The experimental work covers the entire range of regime parameters typical for these systems. There is shown the process of changing oil concentration in the pipe, as the working fluid boils, proving that most of the oil pipe does not impair the heat exchange in the course of two-phase flow boiling. Different modes of refrigerant R406A boiling dynamics have been defined, and each mode is given a quantitative assessment in terms of the effects of the oil and explaining of this effect on the fluid flow and heat transfer based on visual observations and the experiment results. The main factor of the effect is the freon-oil foam, which increases the proportion of the wetted surface in the wave and stratified modes and the heat transfer rate to 30%. A comparison of the heat transfer coefficients both in the cross section and along the pipe length has been performed, showing that the maximum change in heat transfer occurs in the upper part of the surface due to developing a dry wall on it and wetting it with freon-oil foam. A comparison of the heat transfer rate of pure refrigerant R406A has been done; the presence of oil in it shows that the effect of oil is complex and ambiguous. Calculation and criterion dependences for calculation of heat transfer coefficients in different modes have been proposed.

scholarly journals FIBERGLASS CIRCULAR TURBULATOR IN COUNTER FLOW DOUBLE PIPE HEAT EXCHANGER: A STUDY OF HEAT TRANSFER RATE AND PRESSURE DROP

SINERGI ◽  
2020 ◽  
Vol 25 (1) ◽  
pp. 51
Author(s):  
Sudiono Sudiono ◽  
Rita Sundari ◽  
Rini Anggraini
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Pressure Drop ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Preliminary Investigation ◽  
Working Fluid ◽  
Geometrical Shape ◽  
Double Pipe ◽  
Pipe Heat

This preliminary investigation studied the effect of circular turbulator vortex generator on heat transfer rate and pressure drop in a circular channel countercurrent double pipe heat exchanger with water working fluid. Increasing the number of circular turbulator yielded increasing heat transfer rate and pressure drop. The problem generated when increased pressure drop occurred in relation to more energy consumption of the water pumping system. Therefore, optimization in circular turbulator number is necessary to minimize the pressure drop about distance length between circular turbulator, tube diameter and thickness, type of material and crystal lattice, as well as the geometrical shape of fluid passage (circular or square). This study applied PVC outer tube and copper alloy inner tube, as well as fiberglass circular turbulator. The optimum results showed that seven parts of circular turbulator increasing heat transfer rate by 30% and pressure drop by 80% compared to that passage in the absence of circular turbulator at cool water debit of 7 L/min.

Heat Transfer Augmentation in Solar Collectors Using Nanofluids: A Review

2020 ◽  
Vol 6 (2) ◽  
pp. 72-81 ◽  
Author(s):  
Morteza Anbarsooz ◽  
Maryam Amiri ◽  
Iman Rashidi ◽  
Mohammad Javadi
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Heat Transfer Process ◽  
Heat Transfer Fluid ◽  
Working Fluid ◽  
Optical Parameters ◽  
Solar Collectors ◽  
Direct Absorption ◽  
Heat Transfer Augmentation

Background: Enhancing the heat transfer rate in solar collectors is an essential factor for reducing the size of the system. Yet, various methods have been presented in the literature to increase the heat transfer rate from an absorber to the heat transfer fluid. The most important methods are: the use of evacuated receivers, addition of swirl generators/turbulators and use of various nanofluids as the heat transfer fluid. Objective: The current study reviews the achievements in the enhancement of solar collectors’ heat transfer process using various types of nanofluids. The review revealed that the most widely employed nanoparticles are Al2O3 and Carbon nanotubes (CNTs) and the most popular base fluid is water. Most of the investigations are performed on indirect solar collectors, while recently, the researchers focused on direct absorption methods. In the indirect absorption collectors, the thermal conductivity of the working fluid is essential, while in a direct absorption collector, the optical properties are also crucial. Optimization of the optical parameters along with the thermophysical properties of the nanofluid is suggested for the applications of solar collector.

Reducing Crossflow Effects in Arrays of Impinging Jets

2017 ◽  
Author(s):  
Nicholas R. Arens ◽  
Mitchell P. Morem ◽  
Jeffrey Doom ◽  
Gregory J. Michna
Keyword(s):  
Heat Transfer ◽  
Thermal Management ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Heat Transfer Performance ◽  
Cfd Modeling ◽  
Working Fluid ◽  
Transfer Performance ◽  
Simulation Data ◽  
Jet Array

With increasing heat fluxes in microelectronics, thermal management of these devices will soon no longer be attainable through current methods. One thermal management technology that could be integrated into the design of microelectronics is jet impingement cooling. Past research has primarily focused on evenly spaced, equal-sized, circular or slot jets perpendicular to the surface. A significant problem associated with this technology, especially as the surface to be cooled increases in size, is crossflow. This is the interaction of the transverse flow from the spent inner jet fluid with the jets closer to the outer edge of the surface. In an attempt to attenuate the crossflow effects, the heat transfer performance of jet arrays with non-uniform jet diameter and jet spacing were investigated. The testing apparatus housed a 3D-printed jet array nozzle that could be easily exchanged to accommodate many tests. The use of advanced manufacturing techniques allows for array geometries that may have previously been difficult to create. The impingement surface was a circular, polished, oxygen-free copper surface with a diameter of 25.4 mm. Heat transfer rates nearing 400 W could be delivered to the surface, for a heat flux of more than 75 W/cm2. The working fluid was single phase water, and the heat transfer rate was measured for each jet array over a range of flow rates. Experimental data was compared to simulation data obtained through CFD analysis. CFD modeling was used to predict the most promising geometries, which were then validated through experiment. Out of the nozzles tested, it was determined that the nozzle with larger diameters toward the edge of the surface attained the highest heat transfer rate of h = 38,822 W/m2-K. The nozzle with closer jet spacing at the outside of the array was found to have the highest experimental Nusselt number with NuD = 88.8. It was determined that angled confining walls do not have a definitive association with improved heat transfer. The simulation data was found to predict the heat transfer performance of the various geometries with an average percent difference in heat transfer coefficient of 11%.

Three-dimensional numerical simulation of ferrofluid magnetoconvection in cubical enclosure heated with an inner spherical hot block

2021 ◽  
pp. 2150042
Author(s):  
Boubaker Dhibi ◽  
Brahim Ben-Beya
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Three Dimensional ◽  
Staggered Grid ◽  
Working Fluid ◽  
Cubical Enclosure ◽  
Sphere Radius ◽  
Number Formula

In this study, three-dimensional computational analysis is performed to investigate the magnetoconvection of ferrofluid ([Formula: see text]-water) within a cubical enclosure heated by an inner spherical hot block. The ferrofluid, considered as a working fluid, is modeled as a single-phase fluid. The inner spherical block is put at high temperature while all the remaining walls of the enclosure are exposed to low temperature. Two radii values ([Formula: see text] and [Formula: see text]) of the inner hot sphere are examined. Governing equations with corresponding boundary conditions are solved numerically applying a second-order accurate finite volume method on a staggered grid system, using an accelerated multigrid model. Simulations are carried out based on various flow-governing parameters such as Rayleigh number [Formula: see text], Hartmann number [Formula: see text] and ferrofluid nanoparticle volume fraction [Formula: see text]. The effects of the pertinent parameters in the performance of the system are also studied. The flow and thermal fields, the local and surface-averaged Nusselt numbers on the sphere and the enclosure for both configurations are detailed. The flow remains steady and laminar for all Rayleigh numbers regardless of the sphere radius. Obviously, heat transfer rate improves with [Formula: see text] augmentation and minimizes with Ha decrease. At the highest Ra and lowest Ha, higher inner sphere radius shows significantly better heat transfer rate (more than [Formula: see text]). Useful correlations are presented to quantify the surface-averaged heat transfer rate through the cubical enclosure.

Waste Heat Recovery Using Matrix Heat Exchanger from the Exhaust of an Automobile Engine for Heating Car’s Passenger Cabin

2014 ◽  
Vol 984-985 ◽  
pp. 1132-1137
Author(s):  
P. Muthusamy ◽  
Palanisamy Senthil Kumar
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Waste Heat ◽  
Working Fluid ◽  
Cold Fluid ◽  
Matrix Heat Exchanger ◽  
Matrix Heat ◽  
Passenger Cabin

The main objective of our work is to analysis the heat transfer rate for various fluids with different matrix heat exchanger (MHE) models and flow characteristic in matrix heat exchanger by using computational fluid dynamics (CFD) package with small car. The amount of heat carried by the cold fluid from hot fluid is mainly depends upon the mass flow rate of the working fluid. The heat transfer area per unit volume of tube is more. So, it increases the temperature of the cold fluid. Here, the hot and cold fluids are moving in the alternate tubes of heat exchanger in the counter flow direction. The small amounts of pressure drop are occurred but which is less compared to existing model. Flow disturbances are rectified in the MHE through the modifications made. Since, silicon carbide material is used as a polishing material to avoid the deposit of carbon at the inner side of the flow passage and this waste heat energy is used for heating passenger cabin during winter season. The wood is used as an insulating material to avoid the heat flow from fluid to atmosphere. Keywords-Heat transfer rate, Matrix heat exchanger, Working fluid, Polishing material.

Experimental Investigation on the Heat Transfer Characteristics of Nanofluids in Self-Exciting Mode Oscillating-Flow Heat Pipe

2011 ◽  
Vol 396-398 ◽  
pp. 250-254 ◽  
Author(s):  
Fu Min Shang ◽  
Jian Hong Liu ◽  
Deng Ying Liu
Keyword(s):  
Heat Transfer ◽  
Heat Pipe ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Working Fluid ◽  
Oscillating Flow ◽  
Filling Rate ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
Flow Heat

The objective of this article is to provide the heat transfer characteristics of Cu-H2O nanofluids in self-exciting mode oscillating-flow heat pipe under different laser heating input, and to compare with the heat transfer characteristics of the same heat pipe with distilled water as working fluids. In this paper, the peculiarity of heat transfer rate of the SEMOS heat pipe with Cu-H2O fluid has been experimentally confirmed by changing the proportion of working fluid and Cu nanoscale particles in the heat pipe. As the results, it has been confirmed that the parameter of filling rate of working fluid determine the heat transfer rate of SEMOS heat pipe, although under certain condition heat transfer performance could be improved because of the addition of nanofluids.

Sign in / Sign up

Export Citation Format

Share Document