scholarly journals 3D Analysis of D-RaCe and Self-Adjusting File in Removing Filling Materials from Curved Root Canals Instrumented and Filled with Different Techniques

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Neslihan Simsek ◽  
Fuat Ahmetoglu ◽  
Ali Keles ◽  
Elcin Tekin Bulut ◽  
Kursat Er
Keyword(s):  
Ct Scans ◽  
3D Analysis ◽  
Filling Material ◽  
Micro Ct ◽  
Root Canal Filling ◽  
Root Canals ◽  
Filling Materials ◽  
Gutta Percha ◽  
Ah Plus ◽  
Curved Root Canals

The aim of this study was to compare the efficacy of D-RaCe files and a self-adjusting file (SAF) system in removing filling material from curved root canals instrumented and filled with different techniques by using microcomputed tomography (micro-CT). The mesial roots of 20 extracted mandibular first molars were used. Root canals (mesiobuccal and mesiolingual) were instrumented with SAF or Revo-S. The canals were then filled with gutta-percha and AH Plus sealer using cold lateral compaction or thermoplasticized injectable techniques. The root fillings were first removed with D-RaCe (Step 1), followed by Step 2, in which a SAF system was used to remove the residual fillings in all groups. Micro-CT scans were used to measure the volume of residual filling after root canal filling, reinstrumentation with D-RaCe (Step 1), and reinstrumentation with SAF (Step 2). Data were analyzed using Wilcoxon and Kruskal-Wallis tests. There were no statistically significant differences between filling techniques in the canals instrumented with SAF (P=0.292) and Revo-S (P=0.306). The amount of remaining filling material was similar in all groups (P=0.363); all of the instrumentation techniques left filling residue inside the canals. However, the additional use of SAF was more effective than using D-RaCe alone.

scholarly journals Evaluation of Three Ni-Ti Systems in Retreatment of Curved Root Canals Obturated by Gutta-Percha With iRoot SP

2021 ◽  
Author(s):  
Yi Chen ◽  
Weiping Tian ◽  
Lisha Wang ◽  
Fan Qi ◽  
Mengyu Sun ◽  
...  
Keyword(s):  
Root Canal ◽  
Filling Material ◽  
Micro Ct ◽  
Imaging Data ◽  
Root Canals ◽  
Filling Materials ◽  
Gutta Percha ◽  
Group I ◽  
Root Canal Retreatment ◽  
Curved Root Canals

Abstract Background To evaluate the retreatability of curved root canals obturated with gutta-percha (GP) and iRoot SP using three different Ni-Ti systems through micro-computed tomographic (micro-CT) analysis. Methods A total of 51 curved root canals of permanent molars with angles of curvature ranging from 20° to 40° were used. The root canals were prepared with the ProTaper Next (PTN) rotary system to size 25, .06 taper and filled with iRoot SP and GP using the single cone technique. Samples were randomly divided into three groups (n = 17 each) according to the retreatment system used: Group I. ProTaper Universal Retreatment (PTR) system + ProTaper Next system up to PTN X2; Group II. Waveone Gold (WOG) system (WOG25); Group III. Reciproc Blue (RB) system (RB25). The ability to regain apical patency, the volume of residual filling material, and dentinal microcrack were assessed using micro-CT imaging. Data were analyzed statistically using two-way analysis of variance and chi-square test with a significance level of 5%. Results There were no significant differences among the systems tested in the reestablishment of apical patency and reduction of filling materials (P > 0.05), but RB system exhibited better reestablishment root canal ability in the upper portion of curvature and the reduction of filling materials in the apical third (P < 0.05). Intergroup analysis indicated that PTR system induced significantly more dentinal microcracks than other two systems (P < 0.05). Conclusions All three tested Ni-Ti instruments showed the similar retreatability of curved root canals obturated with gutta-percha and iRoot SP. RB system may be more effective and safer in curved root canal retreatment.

scholarly journals Micro-CT Evaluation of Root Filling Removal after Three Stages of Retreatment Procedure

2015 ◽  
Vol 26 (6) ◽  
pp. 612-618 ◽  
Author(s):  
Ricardo Abreu da Rosa ◽  
Manuela Favarin Santini ◽  
Bruno Cavalini Cavenago ◽  
Jefferson Ricardo Pereira ◽  
Marco Antônio Húngaro Duarte ◽  
...  
Keyword(s):  
Root Canal ◽  
Filling Material ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Root Canal Filling ◽  
Tomography System ◽  
Filling Materials ◽  
Ct Evaluation ◽  
Ah Plus ◽  
Post Hoc

The aim of this study was to quantify the residual filling material after filling removal, re-preparation with rotary or reciprocating files and passive ultrasonic irrigation (PUI). Twenty maxillary molars were prepared using ProTaper instruments up to F1. The teeth were filled with AH Plus and ProTaper gutta-percha points using the single-cone technique. Thereafter, the specimens were scanned using a micro-computed tomography system (Micro-CT #1). Then, the root canal filling was removed using ProTaper Retreatment files, and a new scan was performed (Micro-CT #2). The specimens were divided into two groups according to the instrument used for re-preparation: ProTaper rotary or WaveOne reciprocating files (Micro-CT #3). Finally, PUI was performed, and a new micro-CT scan was performed (Micro-CT #4). Intragroup and intergroup analyses were performed using Friedman and Dunn's post hoc test and the Kruskal-Wallis and Dunn post hoc tests, respectively. Palatal canal presented the highest volume of residual filling material in all stages of endodontic retreatment (p<0.05). The main reduction of filling volume was achieved after using ProTaper Retreament (p<0.05). The amount of remaining filling material after using ProTaper Retreatment was similar to that achieved with rotary and reciprocating files and after PUI (p>0.05). Rotary and reciprocating files achieved similar removal of the root canal filling (p>0.05). The greatest reduction in filling material was achieved after using ProTaper Retreatment files. Rotary and reciprocating instruments and PUI did not improve the removal of root canal filling materials.

scholarly journals Radiographic and scanning electron microscopic assessment of root canal filling remnants after endodontic re-instrumentation

2017 ◽  
Vol 20 (1) ◽  
pp. 80 ◽  
Author(s):  
Luciane Geanini Pena Santos ◽  
Wilson Tadeu Felippe ◽  
Beatriz Dulcineia Mendes Souza ◽  
Andrea Cristina Konrath ◽  
Mabel Mariela Rodríguez Cordeiro ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Root Canal ◽  
Filling Material ◽  
Root Canal Filling ◽  
Root Canals ◽  
Filling Materials ◽  
Ah Plus ◽  
Endodontic Retreatment ◽  
Scanning Electron

<p><strong>Objective: </strong>Failures in endodontic treatment may occur by several reasons. Endodontic retreatment is an interesting alternative to manage this clinical problem. However, it is not possible to completely remove the root canal filling by any current retreatment technique. The aim of this study was to evaluate the presence of residual root canal filling materials after endodontic re-instrumentation. <strong>Material and Methods:</strong> Sixty extracted anterior human teeth were prepared by step-back technique with Flexofiles, K-files and Gates-Glidden (GG) burs. Between the use of each file or bur, root canals were irrigated with sodium hypochlorite (NaOCl). Smear layer was removed by irrigation with ethylenediaminetetraacetic acid and NaOCl. After drying with paper points the root canals were randomly divided into 5 groups (n = 12), according to filling material: Resilon cones/Real Seal sealer or gutta-percha cones and Endofill, Sealapex, AH Plus or MTA Fillapex sealers. After one week, root canal fillings were removed using Eucaliptol and K-files. Root canals were re-instrumented with K-files and GG burs sized larger than the first ones. The removal of root canal filling material was analyzed by radiography and scanning electron microscopy (SEM). Statistical analysis was performed using Binary Logistic Regression test (P &lt; 0.05). <strong>Results: </strong>Radiographic and SEM analysis showed that material from the<strong> </strong>MTA Fillapex group was better removed than that from Endofill, Sealapex, AH Plus and Real Seal groups. <strong>Conclusion: </strong>After re-instrumentation<strong>, </strong>MTA Fillapex group showed less remnants into the root canals than Endofill, Sealapex, AH Plus and Real Seal groups. Residual material was most often found in the apical third.</p><p><strong>Keywords </strong></p><p>Dental radiography; Endodontic retreatment; Root canal filling materials; Scanning electron microscopy.</p>

scholarly journals Micro-CT analysis of dentinal microcracks on root canals filled with a bioceramic sealer and retreated with reciprocating instruments

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Andressa Almeida ◽  
Kaline Romeiro ◽  
Marcely Cassimiro ◽  
Luciana Gominho ◽  
Eugênia Dantas ◽  
...  
Keyword(s):  
Root Canal ◽  
Material Removal ◽  
Filling Material ◽  
Micro Ct ◽  
Root Canal Filling ◽  
Root Canals ◽  
Type Iv ◽  
Ct Analysis ◽  
Ah Plus ◽  
Reciprocating Instruments

Abstract This study aimed to analyze the potential occurrence of dentinal defects after the removal of a root canal filling with two different sealers using Reciproc (RC) or Reciproc Blue (RB). The mesial roots of 60 mandibular molars with a Vertucci type IV configuration were selected. The samples were initially instrumented with Reciproc (R25) and then divided into the following four experimental groups according to the endodontic sealer and retreatment instrument (n = 15): BC Sealer/Reciproc (BCRC); BC Sealer/Reciproc Blue (BCRB); AH Plus/Reciproc (AHRC); and AH Plus/Reciproc Blue (AHRB). Then, the samples were scanned under micro-CT after obturation and removal of the filling material. Two analyses were conducted. First, an evaluation was performed on all the axial images, and another analysis evaluated each millimeter of the 10 mm from the apex. Dentinal defects were observed in all the samples. All of the identified defects in the images after filling material removal were present in the corresponding images after obturation. The use of AH Plus and EndoSequence BC Sealer, and filling material removal using RC and RB instruments did not induce dentinal defects.

scholarly journals Efficacy of Removing Thermafil and GuttaCore from Straight Root Canal Systems Using a Novel Non-Surgical Root Canal Re-Treatment System: A Micro-Computed Tomography Analysis

2021 ◽  
Vol 10 (6) ◽  
pp. 1266
Author(s):  
Vicente Faus-Llácer ◽  
Rubén Pérez ◽  
Ignacio Faus-Matoses ◽  
Celia Ruiz-Sánchez ◽  
Álvaro Zubizarreta-Macho ◽  
...  
Keyword(s):  
Root Canal ◽  
Treatment System ◽  
Filling Material ◽  
Micro Computed Tomography ◽  
Root Canal Filling ◽  
Filling Materials ◽  
Gutta Percha ◽  
Ct Analysis ◽  
Canal Systems ◽  
Ah Plus

The present study aims to evaluate the effectiveness of an XP-endo non-surgical root canal re-treatment system in removing both GuttaCore and Thermafil gutta-percha carrier-based root canal filling materials from straight root canal systems using micro-computed tomography (micro-CT) analysis. The study was performed on 20 single-rooted upper teeth, which were randomly allocated into the following study groups: Group A, Thermafil and AH Plus sealer (n = 10); Group B, GuttaCore and AH Plus sealer (n = 10). Before and after the non-surgical root canal re-treatment procedure, the samples were submitted for a micro-CT analysis. The volume of the root canal filling material (mm3), the volume of the remaining root canal filling material (mm3) and the time (minutes) needed to remove the root canal filling material were also recorded. Student’s t-test was used to analyze the results. No statistically significant differences were found between the volume of the remaining root canal filling material in the GuttaCore and Thermafil root canal filling systems at the coronal third (p = 0.782), middle third (p = 0.838) or apical third (p = 0.882) of the straight root canal systems; however, the GuttaCore required a statistically significant (p = 0.037) shorter amount of time (4.72 ± 0.76 min) to be removed than the Thermafil carrier-based root canal filling material (5.92 ± 1.42 min). The XP-endo Finisher non-surgical endodontic re-treatment system removes both GuttaCore and Thermafil gutta-percha carrier-based root canal filling materials from straight root canal systems, although removal of the GuttaCore gutta-percha carrier-based root canal filling material required less time.

scholarly journals Efficacy of Reciprocating Instruments in the Removal of Bioceramic and Epoxy Resin-Based Sealers: Micro-CT Analysis

Materials ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6670
Author(s):  
Marko Rajda ◽  
Ivana Miletić ◽  
Gorana Baršić ◽  
Silvana Jukić Krmek ◽  
Damir Šnjarić ◽  
...  
Keyword(s):  
Epoxy Resin ◽  
Root Canal ◽  
Filling Material ◽  
Micro Ct ◽  
Root Canal Filling ◽  
Human Teeth ◽  
Root Canals ◽  
Gutta Percha ◽  
Ct Analysis ◽  
Reciprocating Instruments

The objective of this study was to evaluate the efficacy of reciprocating instruments in the removal of bioceramic and epoxy resin-based sealers using micro-CT analysis. Root canals of 40 extracted human teeth were instrumented with a size R25 Reciproc instrument. Specimens were randomly divided into two groups (n = 20) according to the root canal filling material. In the first group, root canals were obturated with AH Plus sealer and Reciproc R25 gutta-percha. In the second group, a combination of bioceramic gutta-percha (TotalFill BC) and bioceramic sealer (TotalFill BC) was used. After one week, the retreatment of all specimens was performed using Reciproc instruments. To analyze the differences in the filling remnants, specimens were scanned in a micro-CT device after obturation and after the retreatment procedure. Statistical analysis was performed using the Mann–Whitney U test (p < 0.05). A combination of bioceramic sealer and bioceramic gutta-percha was more effectively removed from canals using a reciprocating instrument, with a filling remnants volume of 4.01 ± 3.13 mm3, in comparison to the combination of epoxy resin-based sealer and gutta-percha (6.96 ± 2.70 mm3) (p < 0.05). A reciprocating instrument was more effective in removing bioceramic sealers than epoxy resin-based sealers, although none of the root canal filling materials were completely removed from the root canals.

scholarly journals Safety and Effectiveness of Additional Apical Preparation using a Rotary Heat-treated Nickel–Titanium file with Larger Diameter and Minimum Taper in Retreatment of Curved Root Canals

2021 ◽  
Author(s):  
Jader Camilo Pinto ◽  
Fernanda Ferrari Esteves Torres ◽  
Airton Oliveira Santos-Junior ◽  
Marco Antonio Hungaro Duarte ◽  
Juliane Maria Guerreiro-Tanomaru ◽  
...  
Keyword(s):  
Fatigue Resistance ◽  
Continuous Wave ◽  
Cyclic Fatigue ◽  
Nickel Titanium ◽  
Filling Material ◽  
Root Canals ◽  
Filling Materials ◽  
Heat Treated ◽  
Before And After ◽  
Curved Root Canals

Abstract Objective The aim of this study was to investigate the effect of additional apical preparation using the ProDesign Logic (PDL) 50/.01 rotary heat-treated nickel–titanium (NiTi) file with a larger diameter and minimal taper for retreatment of curved root canals. Materials and Methods Mesial curved root canals of 12 mandibular molars were prepared using PDL 25/.06 and filled using the continuous wave of condensation technique and AH Plus sealer. After retreatment using ProDesign S (PDS) 25/.08, PDL 25/.06 and PDL 35/05, a complementary procedure was performed with PDL 50/.01. Microcomputed tomography (micro-CT) scanning was performed before and after retreatment procedures. The cyclic fatigue resistance of unused PDS 25/.08, PDL 25/.06, PDL 35/.05 and PDL 50/.01 instruments (n = 12) was evaluated in a stainless-steel device. Statistical Analysis Data on the volumes of the root canals and the remaining filling materials were submitted to the paired t-test. Cyclic fatigue resistance data was submitted to one-way ANOVA and Tukey’s tests (α = 0.05). Results Use of PDL 50/.01 decreased the remaining filling materials in the apical third (p < 0.05). The root canal volume was similar in the cervical and middle thirds before and after preparation using PDL 50/.01 (p > 0.05). PDL 50/.01 presented the highest cyclic fatigue resistance (p < 0.05). Conclusions Use of the PDL 50/.01 instrument as an additional apical preparation for retreatment of curved root canals improved filling material removal in the apical third, while maintaining the dentin in the cervical and middle thirds. In addition, PDL 50/.01 presented high-flexural resistance.

scholarly journals GuttaFlow Bioseal as Monocone Obturation Technique in Curved Root Canals: A Scanning Electron Microscopy Study

2021 ◽  
Vol 15 (2) ◽  
pp. 42-59
Author(s):  
Musliana Mustaffa ◽  
◽  
Hajar Ar Rahmah Nasri ◽  
Insyirah Kamarulzaman ◽  
Mohamad Shafiq Mohd Ibrahim ◽  
...  
Keyword(s):  
Surface Area ◽  
Root Canal ◽  
Current Approach ◽  
Filling Material ◽  
Sem Images ◽  
Root Canals ◽  
Gutta Percha ◽  
Curved Root Canals ◽  
Scanning Electron ◽  
Group 1

The obturation quality of GuttaFlow Bioseal in curved root canals is not commonly investigated although there has been a current approach toward utilizing this material in extracted molars in recent years. This study assessed the obturated surface area, extrusion of root filling material beyond the apical foramen and duration of obturation procedure in curved root canals using monocone obturation technique. Access cavity was prepared in 20 human mandibular molars. Root canals with curvature of more than 10 as determined according to Schneider’s method were included. Samples were prepared using Hyflex CM rotary files and divided into two groups (n=10): Group 1 [gutta-percha cone and GuttaFlow Bioseal] and Group 2 [gutta-percha cone and RoekoSeal Automix root canal sealer]. The duration of obturation procedure was recorded and obturation radiographs were taken. Samples were bisected and the mesial roots were sectioned horizontally to obtain 3 root segments; apical, middle and coronal. All resected roots were mounted on brass stubs, sputter-coated with thin platinum coating and observed under scanning electron microscope (SEM) at 70x magnification. The SEM images were transferred to the SketchAndCalc Area Calculator software. No statistically significant differences in the obturated surface area and extrusion of root filling material were observed between Group 1 and 2, irrespective of the status of root canal curvature. Duration for obturation in severe root canal curvatures between Group 1 and 2 were statistically significant. Obturated surface area and extrusion of root filling material were not affected by the root canal curvature, however duration for obturation using GuttaFlow Bioseal in severe root canal curvatures was slightly longer.

scholarly journals Sealing Ability of AH Plus and GuttaFlow Bioseal

2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Soo-Hyuk Lee ◽  
Soram Oh ◽  
Adel Saeed Al-Ghamdi ◽  
Ayman Omar Mandorah ◽  
Kee-Yeon Kum ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Root Canal ◽  
Glass Ceramics ◽  
Filling Material ◽  
Root Canal Filling ◽  
Measuring Device ◽  
Gutta Percha ◽  
Sealing Ability ◽  
Ah Plus ◽  
The Mean

The objective of root canal obturation is to achieve a fluid-tight seal. Recently, GuttaFlow bioseal (GB), a root canal sealer composed of polydimethylsiloxane, gutta-percha particles, and bioactive glass ceramics, has been developed, to enhance the sealing ability of root canal filling material. The objective of this study was to assess the sealing ability of GB using a subnanoliter-scaled fluid-flow measuring device and to compare with that of AH Plus (AH). The fluid flow in root canal-filled teeth using either gutta-percha cone (GP) with AH (GAR; n = 10) or GP with GB (GBR; n = 10) and in GP inserted in AH blocks (GA; n = 10) or GP inserted in GB blocks (GB; n = 10) was measured. In addition, fluid flow in sealer blocks of AH (A; n = 10) and GB (B; n = 10), which served as negative controls, was measured. Root canal-filled teeth using GP without any sealer (GR) acted as positive controls (n = 10). The leakage was obtained by calculating the volume of moved water by time (s), after stabilization of the fluid flow was achieved. Statistical analysis was performed using the Kruskal–Wallis test and Mann–Whitney U-test with Bonferroni correction. A p value less than 0.00238 (0.05/21) was considered significantly different. The mean leakages (nL/s) in the groups are as follows: GAR, 0.0958 ± 0.0543; GBR, 0.0223 ± 0.0246; GA, 0.0644 ± 0.0803; GB, 0.0267 ± 0.0182; A, 0.0055 ± 0.0057; B, 0.0052 ± 0.005; and GR, 0.2892 ± 0.3018. The mean leakage in the GBR group was lower than that in the GAR group (p = 0.001), while the mean leakages in the GA and GB groups were not significantly different. GuttaFlow bioseal can be useful in single-cone obturation technique.

scholarly journals Effect of a sonic device on bonding of fiberglass posts to root canals

2018 ◽  
Vol 17 ◽  
pp. e18924
Author(s):  
Marina de Almeida Salim ◽  
Thais Mageste Duque ◽  
Heloisa Carla Dell Santo Gusman ◽  
Carolina Oliveira de Lima ◽  
Brenda Paula Figueiredo de Almeida Gomes ◽  
...  
Keyword(s):  
Root Canal ◽  
Adhesive System ◽  
Resin Cement ◽  
Root Canal Filling ◽  
Root Canals ◽  
Gutta Percha ◽  
Ah Plus ◽  
Root Dentin ◽  
Post Hoc ◽  
Adhesive Cement

Aim: This study evaluated the effect of a sonic device on the bonding of fiberglass posts cemented with a self-etching adhesive combined with conventional cement or a self-adhesive cement to root dentin. Methods: Forty single-rooted bovine incisors were endodontically prepared using a step-back technique. Gutta-percha and AH Plus sealer were used for root canal filling, combined with a thermoplasticization technique. After 1 week, the post space was prepared and the roots were divided into four groups according to the following factors: adhesive system/resin cement (Ambar/ AllCem Core [FGM] and RelyX U200 [3M]) and application mode (manual or sonic). The posts were cemented and the roots were cut into discs and submitted to push-out bond strength (POBS) test. The failure mode was evaluated using a stereoscope at 25x magnification. The data were analyzed statistically using ANOVA and Tukey’s post-hoc test (α = 0.05). Results: The sonically activated RelyX U200 group was superior to the other groups. RelyX U200 manually applicated showed similar results to those of sonically activated Âmbar/AllCem. These three groups outperformed the Âmbar/AllCem manually applicated group. Adhesive failure between dentin and resin cement was the most predominant pattern. Conclusion: Sonic application of self-etching adhesive and self-adhesive cement improved the POBS of fiber posts to the root canal.

Sign in / Sign up

Export Citation Format

Share Document