scholarly journals A LES Study on Passive Mixing in Supersonic Shear Layer Flows Considering Effects of Baffle Configuration

2014 ◽  
Vol 6 ◽  
pp. 836146 ◽  
Author(s):  
Ren Zhao-Xin ◽  
Wang Bing
Keyword(s):  
Pressure Loss ◽  
Total Pressure ◽  
Large Scale ◽  
Mixing Layer ◽  
Total Pressure Loss ◽  
Mixing Efficiency ◽  
Mixing Enhancement ◽  
Supersonic Mixing ◽  
Passive Mixing ◽  
Supersonic Mixing Layer

Under the background of dual combustor ramjet (DCR), a numerical investigation of supersonic mixing layer was launched, focused on the mixing enhancement method of applying baffles with different geometric configurations. Large eddy simulation with high order schemes, containing a fifth-order hybrid WENO compact scheme for the convective flux and sixth-order compact one for the viscous flux, was utilized to numerically study the development of the supersonic mixing layer. The supersonic cavity flow was simulated and the cavity configuration could influence the mixing characteristics, since the impingement process of large scale structures formed inside the cavity could raise the vorticity and promote the mixing. The effect of baffle's configurations on the mixing process was analyzed by comparing the flow properties, mixing efficiency, and total pressure loss. The baffle could induce large scale vortexes, promote the mixing layer to lose its stability easily, and then lead to the mixing efficiency enhancement. However, the baffle could increase the total pressure loss. The present investigation could provide guidance for applying new passive mixing enhancement methods for the supersonic mixing.

Effects of pylon geometry on mixing enhancement in a scramjet pylon-cavity flameholder

2020 ◽  
Vol 124 (1278) ◽  
pp. 1262-1280
Author(s):  
A. Oamjee ◽  
R. Sadanandan
Keyword(s):  
Pressure Loss ◽  
Total Pressure ◽  
Supersonic Combustion ◽  
Total Pressure Loss ◽  
Absolute Pressure ◽  
Mixing Efficiency ◽  
Mixing Enhancement ◽  
Scramjet Combustor ◽  
Fuel Jet ◽  
Jet Penetration

ABSTRACTNumerical investigation of the effect of pylon geometry within a pylon-cavity aided Supersonic Combustion Ramjet (SCRAMJET) combustor on mixing enhancement, flame-holding capability, fuel jet penetration and total pressure loss are conducted in the current study. RANS equations for compressed real gas are solved by coupled, implicit, second-order upwind solver. A two-equation SST model is used for turbulence modelling. Validation of the computational model is performed with the help of experimental data collected using surface pressure taps, Schlieren flow visualisation and particle image velocimetry (PIV). The study uses four distinct pylon geometry cases, which include the baseline geometry. Sonic injection of hydrogen fuel through a 1mm diameter hole at 2mm downstream of the pylon rear face along the axis of the test section floor is performed for every case. A crossflow of Mach number 2.2 at four bar absolute pressure and standard atmospheric temperature is maintained. A comparative study of mixing efficiency, total pressure loss, fuel jet penetration and fuel plume area fraction for the different cases evaluate the mixing performance. The simulations show that the Pylon 2 case gives a significant improvement in the performance parameters compared to the other geometries. It is observed that mixing efficiency and fuel jet penetration capability of the system are highly dependent on the streamwise vortex within the flameholder.

Experimental investigation of the role of struts in high speed mixing

2013 ◽  
Vol 117 (1188) ◽  
pp. 193-211 ◽  
Author(s):  
S. L. N. Desikan ◽  
J. Kurian
Keyword(s):  
Pressure Loss ◽  
Total Pressure ◽  
High Speed ◽  
Static Pressure ◽  
Mie Scattering ◽  
Total Pressure Loss ◽  
Pressure Losses ◽  
Mixing Performance ◽  
Supersonic Mixing

AbstractThis paper presents the experimental results of the role of struts in supersonic mixing. Experiments were carried out with novel strut configurations to show their capabilities on mixing with reasonable total pressure losses. The performances were compared with the Baseline Strut configurations (BSPI and BSNI). The analysis presented includes the mixing quantifications using Mie scattering signature, flow field visualisation, measurement of wall static pressure and the total pressure loss calculations. The results clearly demonstrated that the proposed strut configurations achieved increased mixing (7-8%) compared to BSPI with increase in total pressure loss (2%). On the other hand, when compared with BSNI, the mixing performance was found to be decreased by 6% with reduced total pressure loss (12%).

Investigation on Performance of Compressor Cascade with Tubercle Leading Edge Blade

2020 ◽  
Vol 37 (3) ◽  
pp. 295-303 ◽  
Author(s):  
Tu Baofeng ◽  
Zhang Kai ◽  
Hu Jun
Keyword(s):  
Pressure Loss ◽  
Total Pressure ◽  
Large Scale ◽  
Design Method ◽  
Leading Edge ◽  
Experimental Tests ◽  
Aerodynamic Performance ◽  
Total Pressure Loss ◽  
Compressor Cascade ◽  
Linear Compressor Cascade

AbstractIn order to improve compressor performance using a new design method, which originates from the fins on a humpback whale, experimental tests and numerical simulations were undertaken to investigate the influence of the tubercle leading edge on the aerodynamic performance of a linear compressor cascade with a NACA 65–010 airfoil. The results demonstrate that the tubercle leading edge can improve the aerodynamic performance of the cascade in the post-stall region by reducing total pressure loss, with a slight increase in total pressure loss in the pre-stall region. The tubercles on the leading edge of the blades cause the flow to migrate from the peak to the valley on the blade surface around the tubercle leading edge by the butterfly flow. The tubercle leading edge generates the vortices similar to those created by vortex generators, splitting the large-scale separation region into multiple smaller regions.

Numerical Research on the Mixing Mechanism of Lobed Mixer With New De-Swirling Structure

2016 ◽  
Author(s):  
Zhijun Lei ◽  
Jianbo Gong ◽  
Yanfeng Zhang ◽  
Shangmei Su ◽  
Chunyan Hu
Keyword(s):  
Numerical Simulation ◽  
Pressure Loss ◽  
Total Pressure ◽  
Recirculation Zone ◽  
Swirling Flow ◽  
Separation Bubble ◽  
Total Pressure Loss ◽  
Mixing Efficiency ◽  
Flow Mixing ◽  
Inlet Swirl

A detailed numerical simulation is presented to investigate the new de-swirling methods and their effect on the mixing mechanisms of a turbofan mixer with 12 lobes. The numerical simulation employed a commercial solver, ANSYS CFX, using k-ω SST model. The core-to-bypass temperature ratio and pressure ratio were set to 2.59, and 0.97 respectively, giving the Mach number of 0.66 and bypass ratio of 2.65 at mixing nozzle outlet. The inlet swirl typically accelerates the jet-flow mixing by enhancing the vortices intensity and interaction, but leakage swirling flow can cause a three-dimensional separation bubble and the recirculation zone resulting in the dramatic increasing the total pressure loss and thrust loss. Removal of the leakage swirling flow between the lobes’ trough and centre-body was the key to limit the negative influence of inlet swirl. Two IGV design were investigated, DS1 and DS2. DS1 was installed at the upstream of the lobed mixer, could remove the negative effect of inlet swirl properly, but also inhibited the active role of the inlet swirl. The total pressure and thrust loss reduced by 0.31% and 3.8%, respectively, but the mixing efficiency also decreased by 1.72%. DS2, an integrated strut with the lobed mixer design, not only ensured the structure strength of the lobed mixer, but also reduced the length and weight of the exhaust system. This method suppressed the flow separation bubble on centre-body to some extent, and eliminated the recirculation zone downstream of the cenrebody, resulting in the total pressure loss decrease of 0.31% and thrust gain of 3.63%. On the other hand, the method DS2 also made full use of the inlet swirl to enhance the jet-flow mixing, resulting in the mixing efficiency increased 1.54% compared with that of the DS1 case. Under the off-design conditions with the incidence angle of ±10°, the aerodynamic performance of the DS2 cases didn’t changed too much such as the DS1 cases.

Sign in / Sign up

Export Citation Format

Share Document