scholarly journals Dynamic Characteristics Analysis of Power Shift Control Valve

2014 ◽  
Vol 6 ◽  
pp. 824853
Author(s):  
Feng Ren ◽  
Xinhui Liu ◽  
Jinshi Chen ◽  
Ping Zeng ◽  
Boliang Liu ◽  
...  
Keyword(s):  
Simulation Model ◽  
Dynamic Performance ◽  
Control Valve ◽  
Simulation Software ◽  
Vehicle Performance ◽  
Construction Machinery ◽  
Shift Control ◽  
Power Shift ◽  
Characteristics Analysis ◽  
Variation Characteristics

In order to study the influence that dynamic performance of shift control valve has on shifting process of construction machinery, the paper introduces working principle of the shift control valve and sets up the dynamically mathematical model and corresponding simulation model with simulation software LMS Imagine. Lab AMESim. Based on simulation, the paper analyzes the influence of pressure variation characteristics and buffering characteristics acting on vehicle performance during the process of shifting, meanwhile conducting experiments to verify the simulation. The results indicate that the simulation model is accurate and credible; the performance of the valve is satisfactory, which indeed reduces impact during shifting. Furthermore, the valve can meet the demand of other construction machineries in better degree by suitable matching between control spring stiffness and damping holes diameter.

Dynamic Simulation as a Tool for Optimizing Pressure Control Valve Performance

2002 ◽  
Author(s):  
Jack W. Broyles ◽  
Roger W. Shirt
Keyword(s):  
Simulation Model ◽  
Dynamic Simulation ◽  
Control Valve ◽  
Pressure Control ◽  
Simulation Software ◽  
Operating Conditions ◽  
Process Data ◽  
Control Valves ◽  
Tuning Parameters ◽  
Pump Station

Control valves installed for pump station pressure control are typically tuned and commissioned at the low end of the flow range and well below the safe operating limits in order to avoid pressure excursions and line shutdowns during commissioning. Tuning parameters selected for best performance at low flowrates often produce poor performance at high flowrates requiring dampened tuning parameters and slower valve actuator speeds. This results in sluggish responses to pressure changes. Enbridge has undertaken a case study to examine three control valves which exhibited poor control characteristics. The goal of this study was to produce an optimal tuning strategy that could be implemented with a high degree of confidence over the entire range of operating conditions. To accomplish this, the IDEAS (AMEC Technologies, Inc.) dynamic simulation software package was utilized. The pipeline was modeled from the pump station upstream of the station of interest to the downstream pump station. The model consists of pipeline sections, pumps, control valves and other process elements that are hydraulically linked. Station discharge and suction pressures are controlled via PI controllers with adjustable set points, ramp rates and tuning constants. Valve full stroke actuator speed can also be varied. Information required to develop the simulation model included station elevations, pipeline lengths, pump curves and control valve Cv curves. The three simulation models developed for this study have been calibrated against process data by adjusting piping resistances. The inherent nonlinearities present in the control valve system were quantified through use of the simulation model. Various strategies to alleviate the adverse effects of these nonlinearities have been studied. Use of a simulation tool also resulted in increasing the awareness of trade-offs present in design and tuning of control valve systems.

Simulation Research on Dynamic Performance of Electric Vehicle Based on ADVISOR

2012 ◽  
Vol 588-589 ◽  
pp. 355-358
Author(s):  
Xing Wang ◽  
Dong Chen Qin ◽  
Jun Zhu
Keyword(s):  
Electric Vehicle ◽  
Dynamic Performance ◽  
Performance Standards ◽  
Simulation Software ◽  
Simulation Research ◽  
Vehicle Performance ◽  
Vehicle Simulation ◽  
Design Cycle ◽  
Main Component ◽  
Vehicle Movement

The research of the dynamic performance is particularly important so as to improve the performance of electric vehicles. The method of computer modeling and simulation can be used to reduce the expense and shorten design cycle. The theory of dynamic performance standards of electric vehicle performance is introduced, and then, the main component of electric vehicle and the whole vehicle model are built up based on the advanced vehicle simulation software ADVISOR platform, which is developed by U.S. National Renewable Energy Laboratory. The curve results of the dynamic performance are obtained after the simulation of virtual electric vehicle, and it is consistent with the actual vehicle movement. At the same time, the simulation results can be served as essential reference for development and improvement of new vehicles.

Kinematic Analysis of Shaping Machine Based on ADAMS

2014 ◽  
Vol 1049-1050 ◽  
pp. 1056-1060
Author(s):  
Jian Sun
Keyword(s):  
Simulation Model ◽  
Mechanical System ◽  
Dynamic Characteristics ◽  
Kinematic Analysis ◽  
Simulation Analysis ◽  
System Simulation ◽  
Simulation Software ◽  
Characteristics Analysis ◽  
Working Device ◽  
Dynamic Characteristics Analysis

Motion analysis was carried out on the working device of shaper. The simulation model of the Shaping machine is established based on the multi-mechanical system simulation software ADAMS. Through the simulation analysis, we can get the kinematics characteristics of each rod of shaper. In the method, simulation is authentic, visualized and convenient in measurement. The result shows that the method is efficient and useful in the kinematic and dynamic characteristics analysis of mechanism.

Validating the Vertical Dynamic Performance of a Multi-Wheeled Combat Vehicle Computer Simulation Model

2005 ◽  
Author(s):  
Matthew J. Hillegass ◽  
James G. Faller ◽  
Mark S. Bounds ◽  
Moustafa El-Gindy ◽  
Seokyong Chae
Keyword(s):  
Computer Simulation ◽  
Simulation Model ◽  
Dynamic Performance ◽  
Performance Testing ◽  
Simulation Models ◽  
Simulation Software ◽  
Full Scale ◽  
Computer Simulation Model ◽  
Vehicle Model ◽  
Combat Vehicle

Performance testing is an important step in the development of any vehicle model. Generally, full-scale field tests are conducted to collect the dynamic response characteristics for evaluating the vehicle performance. However, with increases in computational power and the accuracy of simulation models, virtual testing can be extensively used as an alternative to the time consuming and costly full-scale tests, especially for severe maneuvers. Validation of the simulation results is critical for the acceptance of such simulation models. In this paper, a methodology for validating the vertical dynamic performance of a virtual vehicle has been discussed. The dynamic performance of a multi-wheeled combat vehicle model specially developed using a multi-body dynamics code was validated against the measured data obtained on the U.S. Army Aberdeen Test Center’s (ATC) test courses. The multi-wheeled combat vehicle variant computer simulation model was developed in TruckSim, a vehicle dynamic simulation software developed by the Mechanical Simulation Corporation. Prior to validating the model, the vehicle weights, dimensions, tires and suspension characteristics were measured and referenced in the specially developed computer simulation model. The data for the tire and suspension characteristics were acquired from the respective leading manufacturers in the form of look-up tables. The predictions of the vehicle vertical dynamics on different road profiles at various vehicle speeds were compared with the field test results. The time domain data for the vertical acceleration at the vehicle center of gravity, pitching, vehicle speed and the suspension/damper displacement were compared to analyze the feasibility of using the computer simulation models to predict the vertical dynamic performance of the vehicle. Based on the results it was found that the particular combat vehicle computer simulation model is capable of predicting the vertical dynamic performance characteristics.

A Novel Transmitting System for Electromagnetic Sounding Based on Tri-state Boost Converter

2019 ◽  
Vol 12 (6) ◽  
pp. 494-499
Author(s):  
Gang Li ◽  
Binren Zhang
Keyword(s):  
Simulation Model ◽  
Output Power ◽  
Basic Principle ◽  
Simulation Experiment ◽  
Dynamic Performance ◽  
Boost Converter ◽  
Electromagnetic Sounding ◽  
Important Method ◽  
Geophysical Exploration ◽  
Electromagnetic Detection

Background: Electromagnetic detection is an important method of geophysical exploration. The transmitting system is an important part of the electromagnetic detection equipment. Methods: The general topologies of a transmitting system for EM instrument are analyzed. The basic principle of EM detection is interpreted. In order to improve the output power and give consideration to the dynamic performance, an electromagnetic transmitting system based on the tri-state boost converter is proposed in this paper. Results: The principle of the proposed transmitting system is analyzed. The topology of the proposed transmitting system is illustrated and the working modes of tri-state boost converter are given. Conclusion: The simulation model is established and the simulation experiment is carried out to verify the feasibility of the new electromagnetic transmitting system.

A Nonlinear Rail Vehicle Dynamics Computer Program SAMS/Rail: Part 1—Theory and Formulations

2009 ◽  
Author(s):  
Khaled E. Zaazaa ◽  
Brian Whitten ◽  
Brian Marquis ◽  
Erik Curtis ◽  
Magdy El-Sibaie ◽  
...  
Keyword(s):  
High Speed ◽  
Dynamic Performance ◽  
Three Dimensional ◽  
Contact Element ◽  
Contact Forces ◽  
Simulation Code ◽  
Vehicle Performance ◽  
Normal Contact ◽  
Advantages And Disadvantages ◽  
High Speed Trains

Accurate prediction of railroad vehicle performance requires detailed formulations of wheel-rail contact models. In the past, most dynamic simulation tools used an offline wheel-rail contact element based on look-up tables that are used by the main simulation solver. Nowadays, the use of an online nonlinear three-dimensional wheel-rail contact element is necessary in order to accurately predict the dynamic performance of high speed trains. Recently, the Federal Railroad Administration, Office of Research and Development has sponsored a project to develop a general multibody simulation code that uses an online nonlinear three-dimensional wheel-rail contact element to predict the contact forces between wheel and rail. In this paper, several nonlinear wheel-rail contact formulations are presented, each using the online three-dimensional approach. The methods presented are divided into two contact approaches. In the first Constraint Approach, the wheel is assumed to remain in contact with the rail. In this approach, the normal contact forces are determined by using the technique of Lagrange multipliers. In the second Elastic Approach, wheel/rail separation and penetration are allowed, and the normal contact forces are determined by using Hertz’s Theory. The advantages and disadvantages of each method are presented in this paper. In addition, this paper discusses future developments and improvements for the multibody system code. Some of these improvements are currently being implemented by the University of Illinois at Chicago (UIC). In the accompanying “Part 2” and “Part 3” to this paper, numerical examples are presented in order to demonstrate the results obtained from this research.

Research on Surface Roughness of Supersonic Vibration Auxiliary Side Milling for Titanium Alloy

2021 ◽  
Author(s):  
XueTao Wei ◽  
caixue yue ◽  
DeSheng Hu ◽  
XianLi Liu ◽  
YunPeng Ding ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Finite Element ◽  
Prediction Model ◽  
Simulation Model ◽  
Finite Element Simulation ◽  
Simulation Software ◽  
Surface Roughness Prediction ◽  
Contour Shape ◽  
Element Simulation ◽  
Roughness Prediction

Abstract The processed surface contour shape is extracted with the finite element simulation software, and the difference value of contour shape change is used as the parameters of balancing surface roughness to construct the infinitesimal element cutting finite element model of supersonic vibration milling in cutting stability domain. The surface roughness trial scheme is designed in the central composite test design method to analyze the surface roughness test result in the response surface methodology. The surface roughness prediction model is established and optimized. Finally, the finite element simulation model and surface roughness prediction model are verified and analyzed through experiment. The research results show that, compared with the experiment results, the maximum error of finite element simulation model and surface roughness prediction model is 30.9% and12.3%, respectively. So, the model in this paper is accurate and will provide the theoretical basis for optimization study of auxiliary milling process of supersonic vibration.

Double-Clutch Power Shift Quality Optimization Based on Optimal Control Theory

2021 ◽  
Vol 37 (4) ◽  
pp. 677-689
Author(s):  
Guang Xia ◽  
Yueqiang Wang ◽  
Xiwen Tang ◽  
Linfeng Zhao ◽  
Jinfang Hu
Keyword(s):  
Optimal Control ◽  
Control Theory ◽  
Control Strategy ◽  
Optimal Control Theory ◽  
Multiple Target ◽  
Shift Quality ◽  
Shift Control ◽  
Power Shift ◽  
Multiparameter Optimization ◽  
Differential Matrix

Highlights A power shift control strategy based on torque and speed transition, which aims to deliver multiple target and multiparameter optimization of power shift control, is proposed in this study. It can effectively solve the shift power cycle. Based on minimum optimal control theory, the optimal control of shift quality during power shifting optimizes clutch terminal oil pressure, which is determined by solving the Rebecca differential matrix equation and shift characteristics based on various stages. By aiming at the multiple target and multiparameter optimization problem of the clutch control in the power shift process, the minimum optimal control principle is applied to the shift quality optimization of the power shift. Based on the minimum optimal control theory, the optimal solution of the terminal oil pressure of the clutch is determined by solving the Rebecca differential matrix equation to improve the shift quality of the power shift process. Abstract . The dual clutch of the combined transmission of a tractor with large horsepower uses a dynamic shifting process, in which only one clutch undergoes slipping friction during the shift. A power shift control strategy based on torque and speed transition, which aims to deliver multiple target and multiparameter optimization of power shift control, is proposed in this study. Based on minimum optimal control theory, the optimal control of shift quality during power shifting optimizes clutch terminal oil pressure, which is determined by solving the Rebecca differential matrix equation and shift characteristics based on various stages. In addition, the power shift simulation model of the double clutch is established. Simulation results show that the power shift control strategy based on single slip friction can effectively avoid power flow cycle, uninterruptible tractor power shift, and adaptive resistance change. The minimum optimization theory can effectively reduce the output torque fluctuation in the dynamic shift process, reduce friction work, and improve the shift impact. Keywords: Double clutch, Heavy-horsepower tractor, Minimum theory, Power shift.

scholarly journals Dynamic Simulation of Petrochemical Wastewater Treatment Using Wastewater Plant Simulation Software

2018 ◽  
Vol 203 ◽  
pp. 03005
Author(s):  
Idzham Fauzi Mohd Ariff ◽  
Mardhiyah Bakir
Keyword(s):  
Simulation Model ◽  
Dynamic Simulation ◽  
Stable Condition ◽  
Oxygen Demand ◽  
Simulation Software ◽  
Petrochemical Plant ◽  
Dynamic Simulation Model ◽  
Plant Monitoring ◽  
Plant Simulation

A dynamic simulation model was developed, calibrated and validated for a petrochemical plant in Terengganu, Malaysia. Calibration and validation of the model was conducted based on plant monitoring data spanning 3 years resulting in a model accuracy (RMSD) for effluent chemical oxygen demand (COD), ammoniacal nitrogen (NH3-N) and total suspended solids (TSS) of ±11.7 mg/L, ±0.52 mg/L and ± 3.27 mg/L respectively. The simulation model has since been used for troubleshooting during plant upsets, planning of plant turnarounds and developing upgrade options. A case study is presented where the simulation model was used to assist in troubleshooting and rectification of a plant upset where ingress of a surfactant compound resulted in high effluent TSS and COD. The model was successfully used in the incident troubleshooting activities and provided critical insights that assisted the plant operators to quickly respond and bring back the system to normal, stable condition.

Effects of design and operating parameters on the static and dynamic performance of an electromagnetic valve actuator

2003 ◽  
Vol 217 (3) ◽  
pp. 193-201 ◽  
Author(s):  
S-H Park ◽  
J Lee ◽  
J Yoo ◽  
D Kim ◽  
K Park
Keyword(s):  
Simulation Model ◽  
New Technology ◽  
Dynamic Performance ◽  
Operating Parameters ◽  
Computer Simulation Model ◽  
Neutral Position ◽  
Electromagnetic Valve ◽  
Actuation System ◽  
Si Engines ◽  
Actuation Devices

The electromagnetic valve (EMV) actuation system is a new technology for improvement in fuel effciency and reduction in emissions in spark ignition (SI) engines. It can provide more flexibility in valve event control compared with conventional variable valve actuation devices. However, a more powerful and effcient actuator design is needed for this technology to be applied in mass production engines. This paper presents the effects of design and operating parameters on the static and dynamic performances of the actuator. Employing the finite element method (FEM), the flow pattern of the magnetic flux is analysed and the resultant magnetic forces of several cases of core and armature designs are calculated. A computer simulation model has been set up to identify the dynamic behaviour of the EMV system. The effects of external disturbances such as cylinder pressure, armature neutral position and current supply time are also analysed. To verify the accuracy of the simulation model, an experimental study is also carried out on a prototype actuator. It is found that there is relatively good agreement between the experimental data and the results from the simulation model. The newly designed actuator is successfully operated on the test bench up to about 6000 r/min, which is the range of rated speed of most production SI engines. Through the whole speed range, the actuator maintains good performance in valve timing and event control.

Sign in / Sign up

Export Citation Format

Share Document