scholarly journals Conjugate Heat Transfer in Rayleigh-Bénard Convection in a Square Enclosure

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Habibis Saleh ◽  
Ishak Hashim
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Rayleigh Number ◽  
Wall Thickness ◽  
Staggered Grid ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Square Enclosure ◽  
Conjugate Natural Convection ◽  
Rayleigh Benard

Conjugate natural convection-conduction heat transfer in a square enclosure with a finite wall thickness is studied numerically in the present paper. The governing parameters considered are the Rayleigh number5×103≤Ra≤106, the wall-to-fluid thermal conductivity ratio0.5≤Kr≤10, and the ratio of wall thickness to its height0.2≤D≤0.4. The staggered grid arrangement together with MAC method was employed to solve the governing equations. It is found that the fluid flow and the heat transfer can be controlled by the thickness of the bottom wall, the thermal conductivity ratio, and the Rayleigh number.

scholarly journals Effect of Al2O3/water nanofluid on Conjugate Free Convection in a Baffle Attached Square Enclosure

Mechanika ◽  
2020 ◽  
Vol 26 (2) ◽  
pp. 126-133
Author(s):  
Thansekhar M.Rathinam
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Rayleigh Number ◽  
Free Convection ◽  
Conjugate Heat Transfer ◽  
Volume Fraction ◽  
Numerical Study ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Square Enclosure

A numerical study of conjugate free convection heat transfer of Al2O3/water nanofluid inside a differentially heated square enclosure with a baffle attached to its hot wall has been carried out. A detailed parametric study has been carried out to analyze the effect of Rayleigh number (104 < Ra < 106), length, thickness and position of baffle, conductivity ratio and volume fraction of the nanoparticle (0<<0.2) on heat transfer. The thermal conductivity ratio of the baffle plays a major role on the conjugate heat transfer inside the enclosure. Higher the baffle length better is the effectiveness of the baffle. The average Nusselt number is found to be an increasing function of both thermal conductivity ratio and volume fraction of the nanofluid. The minimum enhancement of conjugate heat transfer is 30% when Al2O3/water nanofluid of 0.1 volume fraction is used for the entire range of Rayleigh number considered.

scholarly journals Numerical Simulation of Entropy Generation of Conjugate Heat Transfer in A Porous Cavity with Finite Walls and Localized Heat Source

2021 ◽  
Vol 84 (2) ◽  
pp. 116-151
Author(s):  
Ahmed Kadhim Hussein ◽  
Muhaiman Alawi Mahdi ◽  
Obai Younis
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Heat Source ◽  
Entropy Production ◽  
Conjugate Heat Transfer ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Porous Cavity

In this research, the entropy production of the conjugate heat transfer in a tilted porous cavity in respect to heat source and solid walls locations has been studied numerically. Three different cases of the cavity with finite walls thickness and heat source locations are considered in the present study. For both cases one and two, the cavity considered has a vertical finite walls thickness, while the cavity with the horizontal finite walls thickness is considered for case three. For cases one and two, the left sidewall of the cavity is exposed to heat source, whereas the rest of this wall as well as the right sidewall are adiabatic. The upper and lower cavity walls are adiabatic. For case three, the lower wall is exposed to a localized heat source, while the rest of it is assumed adiabatic. The upper wall is cold, whereas the left and right sidewalls are adiabatic. The flow and thermal fields properties along with the entropy production are computed for the modified Rayleigh number (150 ? Ram ? 1000), thermal conductivity ratio (1 ? Kr ? 10), heat source length (0.2 ? B ? 0.6), aspect ratio (0.5 ? AR ? 2) and walls thickness (0.1 ? D1 ? 0.2 and 0.1 ? D2 ? 0.2) respectively. The results show that, the maximum values of the entropy generated from fluid friction develop close to the cavity wall-fluid interfacial, while the maximum values of the entropy generated from heat transfer develop nearby the heat source region. The average Bejan number (Beav) is higher than (0.5) for cases one and two. While for case three, it was found to be less than (0.5). Also, the results show that as the modified Rayleigh number, thermal conductivity ratio, heat source length and aspect ratio increased, the fluid flow intensity in the cavity increased. While, it decreased when the walls thickness increased. From the results, it is concluded that case three gives a higher heat transfer enhancement. The obtained results are compared against another published results and a good agreement is found between them.

Numerical Analysis of Conjugated Convection-Conduction Heat Transfer in a Microtube Gas Flow

2018 ◽  
Vol 11 (1) ◽  
Author(s):  
K. M. Ramadan
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Nusselt Number ◽  
Viscous Dissipation ◽  
Wall Thickness ◽  
Gas Flow ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Axial Conduction ◽  
Transfer Parameters

Abstract Numerical solutions for conjugate heat transfer of a hydro-dynamically fully developed, thermally developing, steady, incompressible laminar gas flow in a microtube with uniform wall heat flux boundary condition are presented. The mathematical model takes into account effects of rarefaction, viscous dissipation, flow work, shear work, and axial conduction in both the wall and the fluid. The effect of the tube wall thickness, the wall-to-fluid thermal conductivity ratio, as well as other factors on heat transfer parameters is investigated, and comparisons with the case of zero wall thickness are presented as appropriate. The results illustrate the significance of heat conduction in the tube wall on convective heat transfer and disclose the significant deviation from those with no conjugated effects. Increasing the wall thickness lowers the local Nusselt number. Increasing the wall-to-fluid thermal conductivity ratio also results in lower Nusselt number. In relatively long and thick microtubes with high wall-to-fluid thermal conductivity ratio, the local Nusselt number exhibits minimum values in the entrance regions and at the end sections due to axial conduction effects. The analysis presented also demonstrate the significance of rarefaction, shear work, axial conduction, as well as the combined viscous dissipation and flow work effects on heat transfer parameters in a microtube gas flow. The combined flow work and viscous dissipation effects on heat transfer parameters are significant and result in a reduction in the Nusselt number. The shear work lowers the Nusselt number when heat is added to the fluid.

A Numerical Study of Conjugate Heat Transfer by Natural Convection and Surface Radiation in a Square Enclosure With Thick Adiabatic Walls

2013 ◽  
Author(s):  
H. Hadim ◽  
K. Blecker
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Nusselt Number ◽  
Natural Convection ◽  
Average Nusselt Number ◽  
Surface Radiation ◽  
Thick Wall ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Square Enclosure

A numerical solution of heat transfer by combined natural convection and surface radiation in a square enclosure with thick adiabatic top and bottom walls and isothermal vertical walls is presented. The present model was used to obtain new results with the addition of thermal conduction at the thick top and bottom walls for a thermal conductivity ratio, K = ksolid/kfluid, that ranges from 0 to 10, emissivity of the adiabatic walls that ranges from 0 to 1, and the Rayleigh Number that ranges from 103 to 106. The model was validated by comparing the results to a benchmark solution and other solutions found in the literature. The results showed that with an increase in thermal conductivity ratio, the flow circulation decreases while the average Nusselt Number increases indicating increased heat transfer across the thick walls and the fluid in the corners. The results indicate that while past studies have shown negligible impact of the emissivity of the adiabatic walls on characteristics of the flow and heat transfer within the cavity, when a wall with moderate heat capacity and conductivity is considered, the resulting flow velocity and temperature distribution within the cavity are found to be significantly influenced by the thick wall emissivity. As the conductivity ratio increases this discrepancy between thin and thick walls becomes greater, there is further need for a more complex and accurate model including the thick walls. The results also showed that an increase in the emissivity of the adiabatic walls results in a slight decrease in the average Nusselt Number.

Conjugate Heat Transfer Using Liquid Metals and Alloys for Enclosures With Solid Conducting Blocks

2010 ◽  
Vol 2 (1) ◽  
Author(s):  
M. McGarry ◽  
C. Bonilla ◽  
I. Metzger
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Conjugate Heat Transfer ◽  
Liquid Metals ◽  
Thermal Conductivity Ratio ◽  
Temperature Sensitive ◽  
Conductivity Ratio ◽  
Prandtl Numbers

A validated computational model was created to simulate the heat transfer from a heated surface using liquid metals and alloys during conjugate heat transfer. This model explores the effect of the Rayleigh number, Prandtl number, thermal conductivity ratio, and aspect ratio on the Nusselt number along the hot surface. The data will show how to keep the temperature sensitive components along the hot wall cool by maximizing the amount of heat removed from the hot wall. The data show three distinct regions that occur as a function of the Rayleigh number for a fixed k∗ and d∗. The data also show that the thermal conductivity ratio between the fluid and the solid conducting block has little effect on the Nusselt number at a fixed Rayleigh number. However, when examining the effect of the aspect ratio on the Nusselt number, two distinct regions can be seen. The results demonstrate that in order to keep the temperature sensitive components cool along the hot wall, one would want to have large Rayleigh and Prandtl numbers. The easiest way to achieve large Rayleigh numbers is by increasing the height of the enclosure. Large Prandtl numbers can be achieved by choosing a fluid that is highly conductive. In addition, the choice of material for the center solid conducting block does not impact the amount of heat removed from the hot wall. However, increased cooling can be achieved by decreasing the spacing between the hot and the cold wall.

scholarly journals Effects of the Wall Properties on the Cooling Efficiency in a Thermosyphon Containing PCM Suspensions

Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 572
Author(s):  
Ching-Jenq Ho ◽  
Shih-Ming Lin ◽  
Chi-Ming Lai
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Wall Thickness ◽  
Thermal Conductivity Ratio ◽  
Heat Transfer Efficiency ◽  
Wall Properties ◽  
Heating Section ◽  
Cooling Section ◽  
Optimum Heat ◽  
Parameter Ranges

This study explores the effects of pipe wall properties (thermal conductivity k and wall thickness tw) on the heat transfer performance of a rectangular thermosyphon with a phase change material (PCM) suspension and a geometric configuration (aspect ratio = 1; dimensionless heating section length = 0.8; dimensionless relative elevation between the cooling and the heating sections = 2) that ensures the optimum heat transfer efficiency in the cooling section. The following parameter ranges are studied: the dimensionless loop wall thickness (0 to 0.5), wall-to-fluid thermal conductivity ratio (0.1 to 100), modified Rayleigh number (1010 to 1011), and volumetric fraction of PCM particles (0 to 10%). The results show that appropriate selection of k and tw can lead to improved heat transfer effectiveness in the cooling section of the PCM suspension-containing rectangular thermosyphon.

Effects of a centered conducting body on natural convection of non-Newtonian fluid in a square enclosure with time-periodic temperature distribution

2020 ◽  
Author(s):  
Peixin Ye ◽  
Dinggen Li ◽  
Zihao Yu ◽  
Haifeng Zhang
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Capacity ◽  
Transient Heat Transfer ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Transfer Ratio ◽  
Periodic Temperature ◽  
Power Law Index ◽  
Time Periodic

In this paper, a modified lattice Boltzmann model that incorporates the effect of heat capacity is adopted to study the effects of a centered conducting body on natural convection of non-Newtonian fluid in a square cavity with time-periodic temperature distribution. The effects of power-law index, Rayleigh number, heat capacity ratio, thermal conductivity ratio, body size, temperature pulsating period and the temperature pulsating amplitude on fluid flow and heat transfer are analyzed in detail. The results showed that the increase of Rayleigh number and thermal conductivity ratio as well as the decrease of power-law index can strengthen both transient and global heat transfer, while the increase of heat capacitance of fluid to the solid wall can only enhance the transient heat transfer, and has little effect on the overall heat transfer. Further, the increase of body size will reduce both the transient heat transfer ratio and the overall heat transfer ratio. In addition, the decrease of temperature pulsating period can enhance the transient heat transfer, but it will slightly weaken the overall heat transfer. Finally, the results show that both the transient and the overall heat transfer ratio are increased with the increase of temperature pulsating amplitude.

Upward and downward conjugate mixed convection heat transfer in a partially porous cavity

2016 ◽  
Vol 26 (1) ◽  
pp. 159-188 ◽  
Author(s):  
Abderrahim Bourouis ◽  
Abdeslam Omara ◽  
Said Abboudi
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Mixed Convection ◽  
Transfer Rate ◽  
Vertical Wall ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Content Type ◽  
Moving Wall ◽  
The Right

Purpose – The purpose of this paper is to provide a numerical study of conjugate heat transfer by mixed convection and conduction in a lid-driven enclosure with thick vertical porous layer. The effect of the relevant parameters: Richardson number (Ri=0.1, 1, 10) and thermal conductivity ratio (Rk=0.1, 1, 10, 100) are investigated. Design/methodology/approach – The studied system is a two dimensional lid-driven enclosure with thick vertical porous layer. The left vertical wall of the enclosure is allowed to move in its own plane at a constant velocity. The enclosure is heated from the right vertical wall isothermally. The left and the right vertical walls are isothermal but temperature of the outside of the right vertical wall is higher than that of the left vertical wall. Horizontal walls are insulated. The governing equations are solved by finite volume method and the SIMPLE algorithm. Findings – From the finding results, it is observed that: for the two studied cases, heat transfer rate along the hot wall is a decreasing function of thermal conductivity ratio irrespective of Richardson numbers contrary to the heat transfer rate along the fluid-porous layer interface which is an increasing function of thermal conductivity ratio. At forced convection dominant regime, the difference between heat transfer rate for upward and downward moving wall is insensitive to the thermal conductivity ratio. For downward moving wall, average Nusselt number is higher than that of upward moving wall. Practical implications – Some applications: building applications, furnace design, nuclear reactors, air solar collectors. Originality/value – From the bibliographic work and the authors’ knowledge, the conjugate mixed convection in lid-driven partially porous enclosures has not yet been investigated which motivates the present work that represent a continuation of the preceding investigations.

Conjugate heat transfer in porous triangular enclosures with thick bottom wall

2009 ◽  
Vol 19 (5) ◽  
pp. 650-664 ◽  
Author(s):  
Yasin Varol ◽  
Hakan F. Oztop ◽  
Ioan Pop
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Natural Convection ◽  
Conjugate Heat Transfer ◽  
Bottom Wall ◽  
Thick Wall ◽  
Thermal Conductivity Ratio ◽  
Conductivity Ratio ◽  
Governing Equations ◽  
Content Type

PurposeThe purpose of this paper is to study the conjugate heat transfer via natural convection and conduction in a triangular enclosure filled with a porous medium.Design/methodology/approachDarcy flow model was used to write governing equations with Boussinesq approximation. The transformed governing equations are solved numerically using a finite difference technique. It is assumed that the enclosure consists of a conducting bottom wall of finite thickness, an adiabatic (insulated) vertical wall and a cooled inclined wall.FindingsFlow patterns, temperature and heat transfer were presented at different dimensionless thickness of the bottom wall, h, from 0.05 to 0.3, different thermal conductivity ratio between solid material and fluid, k, from 0.44 to 283 and Rayleigh numbers, Ra, from 100 to 1000. It is found that both thermal conductivity ratio and thickness of the bottom wall can be used as control parameters for heat transport and flow field.Originality/valueIt is believed that this is the first paper on conduction‐natural convection in porous media filled triangular enclosures with thick wall. In the last years, most of the researchers focused on regular geometries such as rectangular or square cavity bounded by thick wall.

Sign in / Sign up

Export Citation Format

Share Document