scholarly journals Structural and Optical Investigations of Heterostructures Based on AlxGa1-xAsyP1-y:Si Solid Solutions Obtained by MOCVD

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
P. V. Seredin
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Epitaxial Films ◽  
X Ray Diffraction ◽  
Energy Characteristics ◽  
X Ray ◽  
Epitaxial Heterostructures ◽  
High Concentrations ◽  
Scanning Electron

We investigated MOCVD epitaxial heterostructures based on AlxGa1−xAs ternary solid solutions, obtained in the range of compositions x~0.20–0.50 and doped with high concentrations of phosphorus and silicon atoms. Using the methods of high-resolution X-ray diffraction, scanning electron microscopy, X-ray microanalysis, Raman spectroscopy, and photoluminescence spectroscopy we have shown that grown epitaxial films represent five-component (AlxGa1−xAs1−yPy)1−zSiz solid solutions. The implementation of silicon in solid solution with a concentration of ~ 0.01 at.% leads to the formation of the structure with deep levels, DX centers, the occurrence of which fundamentally affects the energy characteristics of received materials.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

Effect of Synthesis Conditions and Actinide Contents on Phase Composition of Actinide Bearing Ceramics

2003 ◽  
Vol 807 ◽  
Author(s):  
A. G. Ptashkin ◽  
S. V. Stefanovsky ◽  
S. V. Yudintsev ◽  
S. A. Perevalov
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Phase Composition ◽  
Fluorite Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Synthesis Conditions ◽  
Reducing Conditions ◽  
Dispersive System ◽  
Scanning Electron

ABSTRACTPu-bearing zirconolite and pyrochlore based ceramics were prepared by melting under oxidizing and reducing conditions at 1550 °C. 239Pu content in the samples ranged between ∼10 and ∼50 wt.%. Phase composition of the ceramics and Pu partitioning were studied using X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive system (SEM/EDS). Major phases in the samples were found to be the target zirconolite and pyrochlore as well as a cubic fluorite structure oxide. Normally the Pu content in the Pu host phases was 10–12 wt.%. This corresponds to the Pu content recommended for matrices for immobilization of excess weapons plutonium. At higher Pu content (up to 50 wt.%) additional phases, such as a PuO2-based cubic fluorite-structured solid solution, perovskite, and rutile were found.

Nanoporous Ni and Ni-Cu Fabricated by Dealloying

2009 ◽  
Vol 1228 ◽  
Author(s):  
Masataka Hakamada ◽  
Yasumasa Chino ◽  
Mamoru Mabuchi
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Noble Metals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
The Difference ◽  
20 Nm ◽  
Good Workability ◽  
Scanning Electron

AbstractMetallic nanoporous architecture can be spontaneously attained by dealloying of a binary alloy. The nanoporous architecture can be often fabricated in noble metals such as Au and Pt. In this study, nanoporous Ni, Ni-Cu are fabricated by dealloying rolled Ni-Mn and Cu-Ni-Mn alloys, respectively. Unlike conventional Raney nickel composed of brittle Ni-Al or Cu-Al intermetallic compounds, the initial alloys had good workability probably because of their fcc crystal structures. After the electrolysis of the alloys in (NH4)2SO4 aqueous solution, nanoporous architectures of Ni and Ni-Cu with pore and ligament sizes of 10–20 nm were confirmed by scanning electron microscopy and transmission electron microscopy. X-ray diffraction analyses suggested that Ni and Cu atoms form a homogeneous solid solution in the Ni-Cu nanoporous architecture. The ligament sizes of nanoporous Ni and Ni-Cu were smaller than that of nanoporous Cu, reflecting the difference between diffusivities of Ni and Cu at solid/electrolyte interface. Ni can reduce the pore and ligament sizes of resulting nanoporous architecture when added to initial Cu-Mn alloys.

scholarly journals Study of Alkali Halide Solid Solutions by Scanning Electron Microscopy and X-ray Diffraction

2017 ◽  
Vol 23 (S1) ◽  
pp. 934-935
Author(s):  
R. Rodriguez-Mijangos ◽  
O. Hernández-Negrete ◽  
R. C. Carrillo-Torres ◽  
F. J. Carrillo-Pesqueira ◽  
M. E. Alvarez-Ramos ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Solid Solutions ◽  
Alkali Halide ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Influence of Annealing Time on Microstructure of Ni-W Alloys

2013 ◽  
Vol 747-748 ◽  
pp. 613-618
Author(s):  
Qiao Zhang ◽  
Shu Hua Liang ◽  
Chen Zhang ◽  
Jun Tao Zou
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Grain Size ◽  
Grain Boundaries ◽  
Annealing Time ◽  
Single Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Average Grain Size ◽  
Scanning Electron

The as-cast Ni-W alloys with 15wt%W, 25wt%W and 30wt%W were annealed in hydrogen at 1100. The effect of the annealing time on the microstructure of Ni-W alloys was studied, and the phase constituents and microstructure of annealed Ni-W alloys were characterized by the X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results showed that no any phase changed for Ni-15%W, Ni-25%W and Ni-30%W alloys annealed for 60 min, 90 min and 150 min, which were still consisted of single-phase Ni (W) solid solution. However, microstructure had a significant change after annealing. With increase of annealing time, the microstructure of Ni-15%W alloy became more uniform after annealing for 90 min, and the average grain size was 95μm, whereas the grain size of Ni-15%W alloy increased significantly after annealing for 150 min. For Ni-25%W and Ni-30%W, there was no obvious change on the grain size with increase of annealing time, and the amount of oxides at grain boundaries gradually reduced. After annealing for 150 min, the impurities at grain boundaries almost disappeared. Subsequently, the annealing at 1100 for 150 min was beneficial for the desired microstructure of Ni-25%W and Ni-30%W alloys.

Synthesis of Ti3Si0.4Al0.8C1.8 Solid Solution

2008 ◽  
Vol 368-372 ◽  
pp. 995-997
Author(s):  
Cui Wei Li ◽  
Hong Xiang Zhai ◽  
Yang Zhou ◽  
Shi Bo Li ◽  
Zhi Li Zhang
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Scanning Electron Microscopy ◽  
Single Phase ◽  
Lattice Parameters ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Powder Mixtures ◽  
X Ray ◽  
Scanning Electron

In this study, free Ti/Si/Al/C powder mixtures with molar ratio of 3:0.4:0.8:1.8 were heated in Argon with various schedules, in order to reveal the possibility for the synthesis of Ti3Si0.4Al0.8C1.8 solid solution powder. X-ray diffraction (XRD) was used for the evaluation of phase identities of the powder after different treatments. Scanning electron microscopy (SEM) was used to observe the morphology of the Ti3Si0.4Al0.8C1.8 solid solution. XRD results showed that predominantly single phase samples of Ti3Si0.4Al0.8C1.8 was prepared after heating at 1400oC for 5 min in Argon and the lattice parameters of Ti3Si0.4Al0.8C1.8 lay between those of Ti3SiC2 and Ti3AlC2.

Effects of V2O5 on the synthesis of Ba2Ti9O20 powders

2005 ◽  
Vol 20 (10) ◽  
pp. 2741-2744 ◽  
Author(s):  
Huixing Lin ◽  
Wei Chen ◽  
Lan Luo
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Scanning Electron Microscopy ◽  
Single Phase ◽  
X Ray Diffraction ◽  
Eutectic Liquid ◽  
X Ray ◽  
Intermediate Phases ◽  
Phase Pure ◽  
Scanning Electron

Phase-pure Ba2Ti9O20 powders were made by doping 3 wt% of V2O5 to a Ba:Ti = 2:9 molar composition, and the effects of the dopant on the phase formation were investigated. The study shows that BaTiO3, BaTi2O5, and BaTi4O9 were the intermediate phases before the formation of Ba2Ti9O20 for samples with or without V2O5. However, with V2O5 doping, the temperature at which Ba2Ti9O20 occurred were lowered from 1150 to 1050 °C and single phase Ba2Ti9O20 powders was easily obtained at 1150 °C for 2 h. Microstructure of the powders was examined by field emission scanning electron microscopy. No evidence of V2O5–Ba2Ti9O20 solid-solution was found by x-ray diffraction and energy-dispersive spectroscopy. The benefit of V2O5 to facilitate the Ba2Ti9O20 synthesis is most probably due to a vanadium-containing eutectic liquid phase which accelerates the migration of reactant species.

scholarly journals Synthesis, Crystal Structure Refinement, and Electrical Conductivity of Pb(8−x)Na2Smx(VO4)6O(x/2)

2014 ◽  
Vol 2014 ◽  
pp. 1-7
Author(s):  
Tatiana M. Savankova ◽  
Lev G. Akselrud ◽  
Lyudmyla I. Ardanova ◽  
Alexey V. Ignatov ◽  
Eugeni I. Get’man ◽  
...  
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Electrical Conductivity ◽  
Scanning Electron Microscopy ◽  
Solid Solutions ◽  
Structure Refinement ◽  
Crystal Structure Refinement ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Solid solutions of Pb(8−x)Na2Smx(VO4)6O(x/2)were studied using X-ray diffraction analysis including Rietveld refinement and scanning electron microscopy and by measuring their electrical conductivity. Crystal structure of the solid solutions was refined and the solubility region0≤x≤0.2was determined for samarium substitution for lead under the scheme2Pb2++□→2Sm3++O2-. The influence of degree of substitution on the electrical conductivity of solid solutions was established.

Microwave-Assisted Preparation of Cu2O Octahedral Microcrystals

2011 ◽  
Vol 284-286 ◽  
pp. 746-749
Author(s):  
Chong Hai Deng ◽  
Han Mei Hu ◽  
Ming Di Yang
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Scanning Electron Microscopy ◽  
Growth Mechanism ◽  
X Ray Diffraction ◽  
Chemical Route ◽  
X Ray ◽  
Microwave Assisted ◽  
Morphology And Structure ◽  
Scanning Electron

In this paper, we reported a facile microwave-assisted green chemical route to prepare pure, uniform, and monodispersed Cu2O octahedron wrapped by the {111} faces by using glucose as a reducing agent. X-ray diffraction (XRD), energy dispersive X-ray spectrometry(EDX) and field emission scanning electron microscopy (FESEM) were used to characterize the as-synthesized products. It was found that the morphology and structure of Cu2O crystals were greatly affected by the concentration of NaOH. A solid-solution-solid growth mechanism was possibly proposed on the basis of the comparative experimental results.

Sign in / Sign up

Export Citation Format

Share Document