scholarly journals Computational Techniques for Autonomous Microgrid Load Flow Analysis

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
M. Venkata Kirthiga ◽  
S. Arul Daniel
Keyword(s):  
Distribution System ◽  
Reactive Power ◽  
Flow Analysis ◽  
Load Flow ◽  
Computational Techniques ◽  
The Real ◽  
Flow Method ◽  
Analysis Techniques ◽  
Load Flow Analysis ◽  
Newton Raphson

This paper attempts at developing simple, efficient, and fast converging load flow analysis techniques tailored to autonomous microgrids. Two modified backward forward sweep techniques have been developed in this work where the largest generator is chosen as slack generator, in the first method and all generator buses are modeled as slack buses in the second method. The second method incorporates the concept of distributed slack bus to update the real and reactive power generations in the microgrid. This paper has details on the development of these two methodologies and the efficacy of these methods is compared with the conventional Newton Raphson load flow method. The standard 33-bus distribution system has been transformed into an autonomous microgrid and used for evaluation of the proposed load flow methodologies. Matlab coding has been developed for validating the results.

scholarly journals Load flow analysis using newton raphson method in presence of distributed generation

2021 ◽  
Vol 12 (1) ◽  
pp. 489
Author(s):  
Tebbakh Noureddine ◽  
Labed Djamel
Keyword(s):  
Reactive Power ◽  
Flow Analysis ◽  
Distribution Networks ◽  
Test System ◽  
Load Flow ◽  
Voltage Profile ◽  
Real Power ◽  
Load Flow Analysis ◽  
Newton Raphson ◽  
Raphson Method

<p>Distributed generations (DG), specially including renewable sources such as wind and sun are offering several opportunities for the currently in existence distribution networks and becoming one of the keys of treatment of its problems. Knowing the effects of each kind of DG on distribution networks is a primordial task because DG impacts differ from one kind to another. In this paper, we have analyzed and compared the effects of two kinds of DG, DG which provides real power only and DG which provides real power and reactive power at the same time connected at the critical bus in DN on the voltage profile, real and reactive power losses. We have proposed Newton Raphson method using Matlab to investigate the impacts of these two kinds of DG on 57-bus IEEE distribution test system. The obtained results have been exposed in detail at the end of this paper.</p>

Operation Characteristics of Zone 3 Distance Protection in Wind Power Systems with Fixed-Speed Induction Generators

2011 ◽  
Vol 12 (4) ◽  
Author(s):  
Shenghu Li
Keyword(s):  
Power Systems ◽  
Wind Power ◽  
Reactive Power ◽  
Flow Analysis ◽  
Load Flow ◽  
Synchronous Generators ◽  
Induction Generators ◽  
Load Flow Analysis ◽  
Wind Power Systems ◽  
Operation Characteristics

The induction generators (IGs) are basic to wind energy conversion. They produce the active power and consume the reactive power, with the voltage characteristics fragile compared with that of the synchronous generators and doubly-fed IGs. In the stressed system states, they may intensify var imbalance, yielding undesirable operation of zone 3 impedance relays.In this paper, the operation characteristics of the zone 3 relays in the wind power systems is studied. With the theoretical and load flow analysis, it is proved that the equivalent impedance of the IGs lies in the 2nd quadrature, possibly seen as the backward faults by the mho relays, i.e. the apparent impedance enters into the protection region from the left side. The undesirable operation may be caused by more wind power, larger load, less var compensation, and larger torque angle.

scholarly journals Comparison of Solvers Performance for Load Flow Analysis

2019 ◽  
Vol 3 (1) ◽  
pp. 26 ◽  
Author(s):  
Vishnu Sidaarth Suresh
Keyword(s):  
Steady State ◽  
Power System ◽  
Reactive Power ◽  
Flow Analysis ◽  
Steady State Solution ◽  
Load Flow ◽  
State Solution ◽  
Computational Time ◽  
Load Flow Analysis ◽  
Active And Reactive Power

Load flow studies are carried out in order to find a steady state solution of a power system network. It is done to continuously monitor the system and decide upon future expansion of the system. The parameters of the system monitored are voltage magnitude, voltage angle, active and reactive power. This paper presents techniques used in order to obtain such parameters for a standard IEEE – 30 bus and IEEE-57 bus network and makes a comparison into the differences with regard to computational time and effectiveness of each solver

scholarly journals Voltage Instability Analysis Using Mipower

2020 ◽  
pp. 220-225
Keyword(s):  
Power Factor ◽  
Power Flow ◽  
Flow Analysis ◽  
Minimum Cost ◽  
Load Flow ◽  
Instability Analysis ◽  
Voltage Instability ◽  
Load Flow Analysis ◽  
Newton Raphson ◽  
Raphson Method

Load Flow Analysis helps in error free operation of power system and also useful in forecasting the required equipment for expansion of the system. By forecasting the magnitude of the supply required along with effects caused by single or multiple defects in the system and calculating the magnitude of errors, it is very easy to compensate them using various techniques with minimum cost and effort. It means before installation the favorable sites and size of the infrastructure used are determined to maintain the power factor in the system. Here Power Flow Analysis is performed using Newton Raphson method. This method is used in solving power flow studies of various number of busesunder various conditions. In any network there will be undesired rise or drop or dissipation of voltage. Voltage instability decreases the efficiency of the system and also damages the equipment used. Hence voltage instability analysis is performed and magnitude of the instability is calculated and compensated using various techniques. Here we performed Load Flow Analysis on a 5bus system and Voltage Instability Analysis is also performed to the same with necessary outputs.[7]

Optimal Power Distribution System Planning and Analysis Using Q-GIS and Soft Computing

2020 ◽  
Vol 12 (1) ◽  
pp. 70-83
Author(s):  
Shabbiruddin ◽  
Sandeep Chakravorty ◽  
Karma Sonam Sherpa ◽  
Amitava Ray
Keyword(s):  
Power Systems ◽  
Power Distribution ◽  
Distribution System ◽  
Flow Analysis ◽  
Integrated Approach ◽  
Load Flow ◽  
Strategic Decisions ◽  
Power Distribution System ◽  
Load Flow Analysis ◽  
Private And Public

The selection of power sub-station location and distribution line routing in power systems is one of the important strategic decisions for both private and public sectors. In general, contradictory factors such as availability, and cost, affects the appropriate selection which adheres to vague and inexact data. The work presented in this research deals with the development of models and techniques for planning and operation of power distribution system. The work comprises a wider framework from the siting of a sub-station to load flow analysis. Work done also shows the application of quantum- geographic information system (Q-GIS) in finding load point coordinates and existing sub-station locations. The proposed integrated approach provides realistic and reliable results, and facilitates decision makers to handle multiple contradictory decision perspectives. To accredit the proposed model, it is implemented for power distribution planning in Bihar which consists of 9 divisions. A Cubic Spline Function-based load flow analysis method is developed to validate the proposal.

Sign in / Sign up

Export Citation Format

Share Document