scholarly journals Preparation and Rheological Characterization of Imogolite Hydrogels

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Kie Fujikura ◽  
Hirotaka Maeda ◽  
Akiko Obata ◽  
Keiichi Inukai ◽  
Katsuya Kato ◽  
...  
Keyword(s):  
Aging Time ◽  
Alkaline Condition ◽  
Rheological Characterization ◽  
Solution Ph ◽  
Salting Out ◽  
Charge Variation ◽  
Ph Range ◽  
Aluminium Silicates ◽  
Gel Network

Imogolite, one of the aluminium silicates, has a nanotube structure and has been known to form gel under alkaline condition. Imogolite nanotubes were synthesized in an acidic solution with various tube lengths by controlling the aging time from 1 d to 14 d. The length of the nanotubes grew from 100 nm to several μm as the aging time. Pure imogolite hydrogels were prepared by applying a salting-out method and centrifugation from its dispersed solutions with various tube lengths and solution pH. Imogolite hydrogel can be classified as the physically cross-linked one; the structure of the gel network is considered to be the entanglements and hydrogen bonding among nanotubes. The theoretical water contents of the prepared hydrogels were calculated as ∼99.7% in average. Gelation percentage significantly increased as the length of imogolite nanotubes. Whereas hydrogel prepared from 4 d aging sample showed the highest storage modulus of ∼970 Pa, it was found that the hydrogel could be prepared in the pH range from 6 to 10. The gel strength reached the highest value of 1000 Pa when the gel was prepared from the imogolite dispersed solution of pH 8. It could be explained by the surface charge variation of the imogolite.

scholarly journals SYNTHESIS AND CHARACTERIZATION OF MESOPOROUS ALUMINOSILICATES Al-MCM-41 AND INVESTIGATION OF ITS THERMAL, HYDROTHERMAL AND ACIDITY STABILITY

2010 ◽  
Vol 10 (1) ◽  
pp. 41-45
Author(s):  
Suyanta Suyanta ◽  
Narsito Narsito ◽  
Endang Tri Wahyuni ◽  
Triyono Triyono
Keyword(s):  
Hexagonal Structure ◽  
Alkaline Condition ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Mesoporous Aluminosilicates ◽  
Solution Ph ◽  
Structure Directing Agent ◽  
Boiled Water ◽  
Mcm 41

The synthesis and characterization of mesoporous aluminosilicates Al-MCM-41 and the investigation of its thermal, hydrothermal and acidity stability have been done. Al-MCM-41 were synthesized by hydrothermal method to the mixture of sodium silicate as Si source, aluminium hydroxide as Al source, sodium hydroxide as a solvent, and cethyltrimethylammoniumbromide (CTAB) as structure directing agent. The reaction were carried out in alkaline condition (pH = 10.2) at 383 K for about 24 h, followed by calcination at 723 K for about 10 h. The synthesized crystals were characterized using FTIR spectroscopy, X-ray diffraction and N2 fisisorption methods. The result showed that Al-MCM-41 sample with hexagonal structure was formed, it has a good in thermal and acid stability, but the structure disintegrated in an alkaline solution (pH = 10) and in boiled water.   Keywords: synthesis, characterization, Al-MCM-41, stability

Isolation and Characterization of Plasminogen Activator from Pig Leucocytes

1974 ◽  
Vol 31 (01) ◽  
pp. 072-085 ◽  
Author(s):  
M Kopitar ◽  
M Stegnar ◽  
B Accetto ◽  
D Lebez
Keyword(s):  
Molecular Weight ◽  
Plasminogen Activator ◽  
Gel Electrophoresis ◽  
Gel Filtration ◽  
Ph Optimum ◽  
Isolation And Characterization ◽  
Ph Range ◽  
Inhibition Studies ◽  
Final Purification

SummaryPlasminogen activator was isolated from disrupted pig leucocytes by the aid of DEAE chromatography, gel filtration on Sephadex G-100 and final purification on CM cellulose, or by preparative gel electrophoresis.Isolated plasminogen activator corresponds No. 3 band of the starting sample of leucocyte cells (that is composed from 10 gel electrophoretic bands).pH optimum was found to be in pH range 8.0–8.5 and the highest pH stability is between pH range 5.0–8.0.Inhibition studies of isolated plasminogen activator were performed with EACA, AMCHA, PAMBA and Trasylol, using Anson and Astrup method. By Astrup method 100% inhibition was found with EACA and Trasylol and 30% with AMCHA. PAMBA gave 60% inhibition already at concentration 10–3 M/ml. Molecular weight of plasminogen activator was determined by gel filtration on Sephadex G-100. The value obtained from 4 different samples was found to be 28000–30500.

Rheological characterization of tack and viscoelasticity of compositions of crepe coating used in the Yankee dryer

TAPPI Journal ◽  
2019 ◽  
Vol 18 (11) ◽  
pp. 641-649
Author(s):  
JOSHUA OMAMBALA ◽  
CARL MCINTYRE
Keyword(s):  
Normal Force ◽  
Weight Ratio ◽  
Good Combination ◽  
Rheological Characterization ◽  
Nonlinear Viscoelastic ◽  
Coating Composition ◽  
Linear And Nonlinear ◽  
Work Done ◽  
Tissue Production

The vast majority of tissue production uses creping to achieve the required set of properties on the base sheet. The Yankee coating helps to develop the desired crepe that in turn determines properties such as bulk and softness. The adhesion of the sheet to the Yankee surface is a very important characteristic to consider in achieving the desired crepe. The coating mix usually consists of the adhesive, modifier, and release. A good combination of these components is essential to achieving the desired properties of the tissue or towel, which often are determined by trials on the machine that can be time consuming and lead to costly rejects. In this paper, five compositions of an industrial Yankee coating adhesive, modifier, and release were examined rheologically. The weight ratio of the adhesive was kept constant at 30% in all five compositions and the modifier and release ratios were varied. The normal force and work done by the different compositions have been shown at various temperatures simulating that of the Yankee surface, and the oscillatory test was carried out to explain the linear and nonlinear viscoelastic characteristic of the optimal coating composition.

CHEMICAL AND RHEOLOGICAL CHARACTERIZATION OF A VEGETABLE-BASED EMULSION

2019 ◽  
Author(s):  
Luiz Eduardo Rodrigues Vieira ◽  
Leonardo Rosa Ribeiro da Silva ◽  
Felipe Chagas Rodrigues de Souza ◽  
Wisley Sales ◽  
Álisson Rocha Machado
Keyword(s):  
Rheological Characterization

RHEOLOGICAL CHARACTERIZATION OF PERUVIAN COPPER ORE SLURRIES

2020 ◽  
Author(s):  
Joel López Bonilla ◽  
Cesar Celis ◽  
Danmer Maza
Keyword(s):  
Rheological Characterization ◽  
Copper Ore

Kinetic of oxidation of methyl orange by vanadium(V) under conditions VO2+ and decavanadates coexist: Catalysis by Triton X-100 micellar medium

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Methyl Orange ◽  
Solution Ph ◽  
Vanadium Concentration ◽  
Limiting Behavior ◽  
First Order ◽  
First Order Kinetics ◽  
Ph Range ◽  
Kinetic Pattern ◽  
Triton X ◽  
Kinetics Of

The kinetics of oxidation of methyl orange by vanadium(V) {V(V)} has been investigated in the pH range 2.3-3.79. In this pH range V(V) exists both in the form of decavanadates and VO2+. The kinetic results are distinctly different from the results obtained for the same reaction in highly acidic solution (pH < 1) where V(V) exists only in the form of VO2+. The reaction obeys first order kinetics with respect to methyl orange but the rate has very little dependence on total vanadium concentration. The reaction is accelerated by H+ ion but the dependence of rate on [H+] is less than that corresponding to first order dependence. The equilibrium between decavanadates and VO2+ explains the different kinetic pattern observed in this pH range. The reaction is markedly accelerated by Triton X-100 micelles. The rate-[surfactant] profile shows a limiting behavior indicative of a unimolecular pathway in the micellar pseudophase.

Removal of Hydrophobic and Hydrophilic Constituents by Anion Exchange Resin

1999 ◽  
Vol 40 (9) ◽  
pp. 207-214 ◽  
Author(s):  
J.-P. Croué ◽  
D. Violleau ◽  
C. Bodaire ◽  
B. Legube
Keyword(s):  
Molecular Weight ◽  
Anion Exchange ◽  
Water Source ◽  
Atomic Ratio ◽  
Size Exclusion ◽  
Salting Out ◽  
Anion Exchange Resins ◽  
Hydrophilic Character ◽  
Exchange Resins

The objective of this work was to compare the affinity of well characterized NOM fractions isolated from two surface waters with strong (gel matrix and macroporous matrix) and weak anion exchange resins (AER) using batch experiment conditions. The structural characterization of the fraction of NOM has shown that the higher the hydrophilic character, the lower the C/O atomic ratio, the lower the SUVA, the lower the aromatic carbon content and the lower the molecular weight. In general (not always), strong AER was more efficient to remove DOC than weak AER. For the same water source (Suwannee River), the higher the molecular weight of the NOM fraction, the lower the affinity with AER. Increasing the ionic strength favored the removal of the hydrophobic NOM fraction (“salting out” effect) while increasing the pH apparently reduced the removal of the hydrophilic NOM fraction. Results were discussed in terms of size exclusion, adsorption, anion exchange and also hydrophobic/hydrophilic repulsion.

scholarly journals Toward Physicochemical and Rheological Characterization of Different Injectable Hyaluronic Acid Dermal Fillers Cross-Linked with Polyethylene Glycol Diglycidyl Ether

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 948
Author(s):  
Nicola Zerbinati ◽  
Sabrina Sommatis ◽  
Cristina Maccario ◽  
Maria Chiara Capillo ◽  
Giulia Grimaldi ◽  
...  
Keyword(s):  
Hyaluronic Acid ◽  
Polyethylene Glycol ◽  
Biological Activities ◽  
Diglycidyl Ether ◽  
Dermal Filler ◽  
Cross Linking ◽  
Matrix Structure ◽  
Dermal Fillers ◽  
Rheological Characterization

(1) Background: Injectable hyaluronic acid (HA) dermal fillers are used to restore volume, hydration and skin tone in aesthetic medicine. HA fillers differ from each other due to their cross-linking technologies, with the aim to increase mechanical and biological activities. One of the most recent and promising cross-linkers is polyethylene glycol diglycidyl ether (PEGDE), used by the company Matex Lab S.p.A., (Brindisi, Italy) to create the HA dermal filler PEGDE family. Over the last few years, several studies have been performed to investigate the biocompatibility and biodegradability of these formulations, but little information is available regarding their matrix structure, rheological and physicochemical properties related to their cross-linking technologies, the HA content or the degree of cross-linking. (2) Methods: Seven different injectable HA hydrogels were subjected to optical microscopic examination, cohesivity evaluation and rheological characterization in order to investigate their behavior. (3) Results: The analyzed cross-linked dermal fillers showed a fibrous “spiderweb-like” matrix structure, with each medical device presenting different and peculiar rheological features. Except for HA non cross-linked hydrogel 18 mg/mL, all showed an elastic and cohesive profile. (4) Conclusions: The comparative analysis with other literature works makes a preliminary characterization of these injectable medical devices possible.

Sign in / Sign up

Export Citation Format

Share Document