scholarly journals Surface Water Quality Assessment of Wular Lake, A Ramsar Site in Kashmir Himalaya, Using Discriminant Analysis and WQI

2014 ◽  
Vol 2014 ◽  
pp. 1-18 ◽  
Author(s):  
Salim Aijaz Bhat ◽  
Ashok K. Pandit
Keyword(s):  
Water Quality ◽  
Discriminant Analysis ◽  
Quality Data ◽  
Stepwise Discriminant Analysis ◽  
Multivariate Techniques ◽  
Kashmir Himalaya ◽  
Water Quality Data ◽  
Data Set ◽  
Total N ◽  
The Mean

Multivariate techniques, discriminant analysis, and WQI were applied to analyze a water quality data set including 27 parameters at 5 sites of the Lake Wular in Kashmir Himalaya from 2011 to 2013 to investigate spatiotemporal variations and identify potential pollution sources. Spatial and temporal variations in water quality parameters were evaluated through stepwise discriminant analysis (DA). The first spatial discriminant function (DF) accounted for 76.5% of the total spatial variance, and the second DF accounted for 19.1%. The mean values of water temperature, EC, total-N, K, and silicate showed a strong contribution to discriminate the five sampling sites. The mean concentration of NO2-N, total-N, and sulphate showed a strong contribution to discriminate the four sampling seasons and accounted for most of the expected seasonal variations. The order of major cations and anions was Ca2+>Mg2+> Na+>K+ and Cl->SO42->SiO22- respectively. The results of water quality index, employing thirteen core parameters vital for drinking water purposes, showed values of 49.2, 46.5, 47.3, 40.6, and 37.1 for sites I, II, III, IV, and V, respectively. These index values reflect that the water of lake is in good condition for different purposes but increased values alarm us about future repercussions.

scholarly journals Pioneering water quality data on the Lake Victoria watershed: effects on human health

2015 ◽  
Vol 13 (3) ◽  
pp. 920-930 ◽  
Author(s):  
Tamie J. Jovanelly ◽  
Julie Johnson-Pynn ◽  
James Okot-Okumu ◽  
Richard Nyenje ◽  
Emily Namaganda
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Lake Victoria ◽  
Fecal Coliforms ◽  
World Health ◽  
Quality Data ◽  
Water Quality Data ◽  
Data Set ◽  
Forest Reserves ◽  
Elevated Exposure

Four forest reserves within 50 km of Kampala in Uganda act as a critical buffer to the Lake Victoria watershed and habitat for local populations. Over a 9-month period we capture a pioneering water quality data set that illustrates ecosystem health through the implementation of a water quality index (WQI). The WQI was calculated using field and laboratory data that reflect measured physical and chemical parameters (pH, dissolved oxygen, biological oxygen on demand, nitrates, phosphates, fecal coliform, and temperature turbidity). Overall, the WQI for the four forest reserves reflect poor to medium water quality. Results compared with US Environmental Protection Agency and World Health Organization drinking water standards indicate varying levels of contamination at most sites and all designated drinking water sources, with signatures of elevated nitrates, phosphates, and/or fecal coliforms. As critical health problems are known to arise with elevated exposure to contaminants in drinking water, this data set can be used to communicate necessary improvements within the watershed.

scholarly journals Modelling lake trophic state: A random forest approach

2015 ◽  
Author(s):  
Jeffrey W Hollister ◽  
W. Bryan Milstead ◽  
Betty J. Kreakie
Keyword(s):  
Water Quality ◽  
Random Forests ◽  
Trophic State ◽  
Mean Squared Error ◽  
Quality Data ◽  
Full Model ◽  
Water Quality Data ◽  
Squared Error ◽  
The Mean

Productivity of lentic ecosystems is well studied and it is widely accepted that as nutrient inputs increase, productivity increases and lakes transition from lower trophic state (e.g. oligotrophic) to higher trophic states (e.g. eutrophic). These broad trophic state classifications are good predictors of ecosystem condition, services, and disservices (e.g. recreation, aesthetics, and harmful algal blooms). While the relationship between nutrients and trophic state provides reliable predictions, it requires in situ water quality data in order to parameterize the model. This limits the application of these models to lakes with existing and, more importantly, available water quality data. To address this, we take advantage of the availability of a large national lakes water quality database (i.e. the National Lakes Assessment), land use/land cover data, lake morphometry data, other universally available data, and apply data mining approaches to predict trophic state. Using this data and random forests, we first model chlorophyll a, then classify the resultant predictions into trophic states. The full model estimates chlorophyll a with both in situ and universally available data. The mean squared error and adjusted R2 of this model was 0.09 and 0.8, respectively. The second model uses universally available GIS data only. The mean squared error was 0.22 and the adjusted R2 was 0.48. The accuracy of the trophic state classifications derived from the chlorophyll a predictions were 69% for the full model and 49% for the “GIS only” model. Random forests extend the usefulness of the class predictions by providing prediction probabilities for each lake. This allows us to make trophic state predictions and also indicate the level of uncertainity around those predictions. For the full model, these predicted class probabilites ranged from 0.42 to 1. For the GIS only model, they ranged from 0.33 to 0.96. It is our conclusion that in situ data are required for better predictions, yet GIS and universally available data provide trophic state predictions, with estimated uncertainty, that still have the potential for a broad array of applications. The source code and data for this manuscript are available from https://github.com/USEPA/LakeTrophicModelling.

scholarly journals Application of multivariate statistical techniques for investigating climate change and anthropogenic effects on surface water quality assessment: case study of Zohreh river, Hendijan, Iran

2021 ◽  
Vol 11 (6) ◽  
Author(s):  
Jalal Valiallahi ◽  
Saideh Khaffaf Roudy
Keyword(s):  
Water Quality ◽  
Cluster Analysis ◽  
Factor Analysis ◽  
Monitoring Program ◽  
T Test ◽  
Total Variance ◽  
Quality Data ◽  
Water Quality Data ◽  
Significant Difference ◽  
The Mean

AbstractIn the present study, evaluation of spatial variations and interpretation of Zohrehh River water quality data were made by using multivariate analytical techniques including factor analysis and cluster analysis also the Arc GIS® software was used. The research method was formulated to achieve objectives herein, including field observation, numerical modeling, and laboratory analyses. The results showed that dataset consisted of 11,250 observations of seven-year monitoring program (measurement of 15 variables at 3 main stations from April 2010 to March 2017). Factor analysis with principal component analysis extraction of the dataset yielded seven varactors contributing to 82% of total variance and evaluated the incidence of each varactor on the total variance. The results of cluster analysis became complete with t-test and made water quality comparison between two clusters possible. Results of factor analysis were employed to facilitate t-test analysis. The t-test revealed the significant difference in a confidence interval of 95% between the mean of calculated varactors 1, 2, 6 and 7 between two clusters, but there was no significant difference in the mean of other varactors 3, 4 and 5 between two groups. The result shows the effect of agricultural fertilizers on stations located at downstream of the ASK dam.

scholarly journals Modelling lake trophic state: A random forest approach

2015 ◽  
Author(s):  
Jeffrey W Hollister ◽  
W. Bryan Milstead ◽  
Betty J. Kreakie
Keyword(s):  
Water Quality ◽  
Random Forests ◽  
Trophic State ◽  
Mean Squared Error ◽  
Quality Data ◽  
Full Model ◽  
Water Quality Data ◽  
Squared Error ◽  
The Mean

Productivity of lentic ecosystems is well studied and it is widely accepted that as nutrient inputs increase, productivity increases and lakes transition from lower trophic state (e.g. oligotrophic) to higher trophic states (e.g. eutrophic). These broad trophic state classifications are good predictors of ecosystem condition, services, and disservices (e.g. recreation, aesthetics, and harmful algal blooms). While the relationship between nutrients and trophic state provides reliable predictions, it requires in situ water quality data in order to parameterize the model. This limits the application of these models to lakes with existing and, more importantly, available water quality data. To address this, we take advantage of the availability of a large national lakes water quality database (i.e. the National Lakes Assessment), land use/land cover data, lake morphometry data, other universally available data, and apply data mining approaches to predict trophic state. Using this data and random forests, we first model chlorophyll a, then classify the resultant predictions into trophic states. The full model estimates chlorophyll a with both in situ and universally available data. The mean squared error and adjusted R2 of this model was 0.09 and 0.8, respectively. The second model uses universally available GIS data only. The mean squared error was 0.22 and the adjusted R2 was 0.48. The accuracy of the trophic state classifications derived from the chlorophyll a predictions were 69% for the full model and 49% for the “GIS only” model. Random forests extend the usefulness of the class predictions by providing prediction probabilities for each lake. This allows us to make trophic state predictions and also indicate the level of uncertainity around those predictions. For the full model, these predicted class probabilites ranged from 0.42 to 1. For the GIS only model, they ranged from 0.33 to 0.96. It is our conclusion that in situ data are required for better predictions, yet GIS and universally available data provide trophic state predictions, with estimated uncertainty, that still have the potential for a broad array of applications. The source code and data for this manuscript are available from https://github.com/USEPA/LakeTrophicModelling.

scholarly journals Discriminant Analysis of Water Quality Data in Langat River

2013 ◽  
pp. 597-601
Author(s):  
Zalina Mohd Ali ◽  
Noor Akma Ibrahim ◽  
Kerrie Mengersen ◽  
Mahendran Shitan ◽  
Hafizan Juahir
Keyword(s):  
Water Quality ◽  
Discriminant Analysis ◽  
Quality Data ◽  
Water Quality Data ◽  
Langat River

The role of citizen science as a tool of public information in water quality management in the Brantas catchment, Indonesia

2021 ◽  
Author(s):  
Reza Pramana ◽  
Schuyler Houser ◽  
Daru Rini ◽  
Maurits Ertsen
Keyword(s):  
Water Quality ◽  
Quality Management ◽  
Citizen Science ◽  
Water Resource ◽  
Water Resource Management ◽  
Water Quality Management ◽  
Data Availability ◽  
Quality Data ◽  
Water Quality Data ◽  
Data Set

<p>Water quality in the rivers and tributaries of the Brantas catchment (about 12.000 km<sup>2</sup>) is deteriorating due to various reasons, including rapid economic development, insufficient domestic water treatment and waste management, and industrial pollution. Various parameters measured by agencies involved in water resource development and management and environmental management consistently demonstrate exceedance of the local water quality standards. Between the different agencies, water quality data are available – intermittently from 2009 until 2019 at 104 locations, but generally on a monthly basis. Still, opportunities to improve data availability are apparent, both to increase the amount and representability of the data sets. The opportunity to expand available data via citizen science is simultaneously an opportunity to provide education on water stewardship and empower citizens to participate in water quality management. We plan to involve people from eight communities living close to the river and researchers from two local universities in a citizen-science campaign. The community members would sample weekly at 10 locations, from upstream to downstream of the catchment. We will use probes and test strips to measure the temperature, electrical conductivity, pH, nitrate, phosphate, ammonia, iron, and dissolved oxygen. The results will potentially be combined with the data from government agencies to construct an integrated water quality data set to improve decision making and the quality of community engagement in water resource management.</p>

Advanced monitoring of water systems using in situ measurement stations: data validation and fault detection

2013 ◽  
Vol 68 (5) ◽  
pp. 1022-1030 ◽  
Author(s):  
Janelcy Alferes ◽  
Sovanna Tik ◽  
John Copp ◽  
Peter A. Vanrolleghem
Keyword(s):  
Water Quality ◽  
Treatment Plant ◽  
Principal Component ◽  
Quality Data ◽  
Water Quality Data ◽  
Data Set ◽  
Data Quality Assessment ◽  
Multiple Sensor ◽  
Pertinent Information

In situ continuous monitoring at high frequency is used to collect water quality information about water bodies. However, it is crucial that the collected data be evaluated and validated for the appropriate interpretation of the data so as to ensure that the monitoring programme is effective. Software tools for data quality assessment with a practical orientation are proposed. As water quality data often contain redundant information, multivariate methods can be used to detect correlations, pertinent information among variables and to identify multiple sensor faults. While principal component analysis can be used to reduce the dimensionality of the original variable data set, monitoring of some statistical metrics and their violation of confidence limits can be used to detect faulty or abnormal data and can help the user apply corrective action(s). The developed algorithms are illustrated with automated monitoring systems installed in an urban river and at the inlet of a wastewater treatment plant.

scholarly journals Evaluation of Temporal and Spatial Variations of Water Quality Parameters in Zohreh River, Iran

2019 ◽  
Vol 6 (2) ◽  
pp. 75-82
Author(s):  
Maryam Ravanbakhsh ◽  
Yaser Tahmasebi Birgani ◽  
Maryam Dastoorpoor ◽  
Kambiz Ahmadi Angali
Keyword(s):  
Water Quality ◽  
Electrical Conductivity ◽  
Quality Parameters ◽  
Water Quality Parameters ◽  
Quality Data ◽  
Sodium Absorption ◽  
Data Sets ◽  
Water Quality Data ◽  
Data Set ◽  
Temporal And Spatial

Discriminant analysis (DA) and principal component analysis (PCA), as multivariate statistical techniques, are used to interpret large complex water quality data and assess their temporal and spatial variation in the basin of the Zohreh river. In this study, data sets of 16 water quality parameters collected from 1966 to 2013) in 4 stations (1554 observations for each parameter) were analyzed. PCA for data sets of Kheirabad, Poleflour, Chambostan and Dehmolla stations resulted in 4, 4, 4, and 3 latent factors accounting for 88.985%, 93.828%, 88.648%, and 88.68% of the total variance in water quality parameters, respectively. It is indicated that total dissolved solids (TDS), electrical conductivity (EC), chlorides (Cl−), sodium (Na), sodium absorption ratio (SAR), and %Na were responsible for water quality variations which are mainly related to natural and anthropogenic pollution sources including climate effects, gypsum, and salt crystals in the supratidal of Zohreh river delta, fault zones of Chamshir I and II, drainage of sugarcane fields, and domestic and industrial wastewaters discharge into the river. DA reduced the data set to only seven parameters (discharge, temperature, electrical conductivity, HCO3-, Cl-, %Na, and T-Hardness), affording more than 58.5% correct assignations in temporal evaluations and describing responsible parameters for large variations in the quality of the Zohreh river.

A water quality index for contact recreation in New Zealand

2001 ◽  
Vol 43 (5) ◽  
pp. 285-292 ◽  
Author(s):  
J. W. Nagels ◽  
R. J. Davies-Colley ◽  
D. G. Smith
Keyword(s):  
Water Quality ◽  
New Zealand ◽  
Water Quality Index ◽  
Quality Index ◽  
Quality Data ◽  
Water Quality Data ◽  
E Coli ◽  
The Mean ◽  
Index Value ◽  
Contact Recreation

We surveyed the opinions of 16 water quality experts in order to develop a water quality index for contact recreation in freshwaters in New Zealand. The index was developed by postal surveys using the Delphi method, involving feedback of information to the panel members at each iteration. Determinands selected for use in the index were as follows: faecal bacterial indicators (faecal coliforms or E. coli), pH, Munsell colour, visual clarity indicators (black disc visibility or turbidity), and nutrients promoting nuisance growths (filtered BOD5, and dissolved forms of phosphorus and nitrogen). “Sub-index” curves relating suitability-for-use to these water quality determinands have been developed. The mean (“consensus”) sub-index curves can be used to interpret water quality data in terms of suitability-for-use scores. We advocate using the lowest suitability-for-use score for a water as its overall index value for contact recreation. Thus the water body's suitability-for-use is determined by its “poorest”characteristic. The index is now ready to be tested by water managers for its utility in state-of-environment reporting.

Sign in / Sign up

Export Citation Format

Share Document