scholarly journals An Analytical Model for Fatigue Crack Propagation Prediction with Overload Effect

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Shan Jiang ◽  
Wei Zhang ◽  
Xiaoyang Li ◽  
Fuqiang Sun
Keyword(s):  
Fatigue Crack ◽  
Plastic Zone ◽  
Crack Growth ◽  
Crack Closure ◽  
Retardation Effect ◽  
Crack Growth Behavior ◽  
Zone Model ◽  
Constant Amplitude ◽  
Proposed Model ◽  
Single Overload

In this paper a theoretical model was developed to predict the fatigue crack growth behavior under the constant amplitude loading with single overload. In the proposed model, crack growth retardation was accounted for by using crack closure and plastic zone. The virtual crack annealing model modified by Bauschinger effect was used to calculate the crack closure level in the outside of retardation effect region. And the Dugdale plastic zone model was employed to estimate the size of retardation effect region. A sophisticated equation was developed to calculate the crack closure variation during the retardation area. Model validation was performed in D16 aluminum alloy and 350WT steel specimens subjected to constant amplitude load with single or multiple overloads. The predictions of the proposed model were contrasted with experimental data, and fairly good agreements were observed.

In-Situ SEM Testing for Transient Fatigue Crack Growth Behavior Investigation Subjected to a Single Tensile Overload

2014 ◽  
Author(s):  
Wei Zhang ◽  
Yongming Liu
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Crack Closure ◽  
Crack Tip ◽  
Growth Behavior ◽  
Crack Growth Behavior ◽  
Fatigue Crack Growth Behavior ◽  
Single Overload

In this paper, the in-situ scanning electron microscopy (SEM) experiments are performed in the edge-cracked specimen under the single overload in order to investigate transient fatigue crack growth behavior. The specimen is made of Al7075-T6 and under the plane stress condition. During the testing, several loading cycles of interest are selected and divided into a certain number of steps. At each step, high resolution images around the crack tip region are taken under the SEM. Imaging analysis is used to quantify the crack tip opening displacement (CTOD) at each corresponding time instant in a loading cycle. In the current experimental work, the crack closure phenomenon is not only directly observed under constant amplitude loadings, but also under the variable amplitude loading. The experimental results provide the evidence that the crack closure may disappear or become inconsequential right after the single overload. And some observations imply that the crack closure is not the only parameter which controls fatigue crack growth rate, other factors need to be considered. A detailed discussion is given based on the current investigation.

Effects of a Single Overload on Fatigue Crack Growth of Type 316 Stainless Steel

2021 ◽  
Author(s):  
Koji Miyoshi ◽  
Masayuki Kamaya
Keyword(s):  
Growth Rate ◽  
Stainless Steel ◽  
Fatigue Crack ◽  
Crack Growth Rate ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Crack Opening ◽  
Constant Amplitude ◽  
Single Overload ◽  
Tensile Overload

Abstract The effect of a single overload on the fatigue crack growth rate was investigated for Type 316 stainless steel. Fatigue crack growth tests were conducted by controlling strain and load. Tensile and compressive overloads were applied during constant amplitude cycling. The overload ratio, which was defined as the ratio of overload size to baseline constant amplitude, was also changed. The constant amplitude tests were conducted at the strain or the stress ratio of −1.0 which was defined as the ratio of the minimum value to the maximum value. The crack opening point was obtained by the unloading elastic compliance method. The crack growth rate increased after the single compressive overload. The accelerating rate increased with the overload ratio. In contrast, not only the acceleration but also the retardation of the crack growth rate was observed for some tensile overload cases. The crack growth rate increased for relatively small tensile overload cases and decreased for relatively large tensile overload cases. The change in the crack opening level was examined. The crack growth rates after tensile and compressive single overloads correlated with the effective strain and stress intensity factor ranges both for load and strain controlling modes.

Effect of Stress Ratio on Fatigue Crack Growth in 95Pb-5Sn Solder

1999 ◽  
Vol 123 (3) ◽  
pp. 311-315 ◽  
Author(s):  
J. Zhao and ◽  
Y. Mutoh ◽  
T. Ogawa
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Crack Closure ◽  
Stress Ratio ◽  
High Stress ◽  
Growth Behavior ◽  
Crack Growth Behavior ◽  
Threshold Region ◽  
Test Conditions

The stress ratio effect on the fatigue crack growth behavior of 95Pb-5Sn solder has been investigated. It is found that both ΔJ and ΔK can correlate fatigue crack growth data well, which means that the crack growth behavior of the 95Pb-5Sn solder under the frequency of 10 Hz was dominantly cyclic dependent. The da/dN-ΔJ relationship can be expressed as: da/dN=1.1×10−11s˙ΔJ1.45. Low level of crack closure was found only in the near-threshold region. Except in this region, no crack closure was observed in the present test conditions. Both transgranular and intergranular fractures were observed on fracture surfaces: the former was dominant in most test conditions and the latter was dominant at the high stress ratio of 0.7. Striations and striation-like features were also found. Many slip bands and cavities along the grain boundary were observed on the crack wake and ahead of the crack tip in the high crack growth rate region.

Experimental Technique for Elevated Temperature Mode I Fatigue Crack Growth Testing of Ni-Base Metal Foils

2006 ◽  
Vol 129 (4) ◽  
pp. 594-602 ◽  
Author(s):  
L. Liu ◽  
J. W. Holmes
Keyword(s):  
Fatigue Crack ◽  
Stress Intensity ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Growth Behavior ◽  
Crack Growth Behavior ◽  
Fatigue Crack Growth Behavior ◽  
Constant Amplitude ◽  
Stress Intensity Range ◽  
Metallic Foils

Details are provided for an experimental approach to study the tensile fatigue crack growth behavior of very thin metallic foils. The technique utilizes a center-notched specimen and a hemispherical bearing alignment system to minimize bending strains. To illustrate the technique, the constant amplitude fatigue crack growth behavior of a Ni-base superalloy foil was studied at temperatures from 20°C to 760°C. The constant amplitude fatigue tests were performed at a frequency of 2Hz and stress ratio of 0.2. The crack growth rate versus stress intensity range data followed a Paris relation with a stress intensity range exponent m between 5 and 6; this exponent is significantly higher than what is commonly observed for thicker materials and indicates very rapid fatigue crack propagation rates can occur in thin metallic foils.

Experimental and Numerical Investigation of Plasticity-Induced Fatigue Crack Closure in Overmatched Welds

2013 ◽  
Author(s):  
Diego F. B. Sarzosa ◽  
Claudio Ruggieri
Keyword(s):  
Fatigue Crack ◽  
Fatigue Crack Growth ◽  
Crack Growth ◽  
Crack Closure ◽  
Compact Tension ◽  
Cyclic Stress ◽  
Growth Behavior ◽  
Weld Strength ◽  
Crack Growth Behavior ◽  
Fatigue Crack Growth Behavior

This work provides a numerical and experimental investigation of fatigue crack growth behavior in steel weldments including crack closure effects and their coupled interaction with weld strength mismatch. A central objective of this study is to extend previously developed frameworks for evaluation of crack closure effects on fatigue crack growth rates (FCGR) to steel weldments while, at the same time, gaining additional understanding of commonly adopted criteria for crack closure loads. Very detailed non-linear finite element analyses using 3-D models of compact tension C(T) fracture specimens with square groove, weld centerline cracked welds provide the evolution of crack growth with cyclic stress intensity factor which is required for the estimation of the closure loads. Fatigue crack growth tests conducted on plane-sided, shallow-cracked C(T) specimens provide the necessary data against which crack closure effects on fatigue crack growth behavior can be assessed. Overall, the present investigation provides additional support for estimation procedures of plasticity-induced crack closure loads in fatigue analyses of structural steels and their weldments.

Sign in / Sign up

Export Citation Format

Share Document