scholarly journals Effect of Nanoclay Dispersion on the Properties of a Commercial Glass Ionomer Cement

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Muhammad A. Fareed ◽  
Artemis Stamboulis
Keyword(s):  
Mechanical Properties ◽  
Glass Ionomer Cement ◽  
Gel Permeation Chromatography ◽  
Glass Ionomer ◽  
Acid Base ◽  
Standard Requirement ◽  
The Matrix ◽  
Commercial Glass ◽  
Liquid Portion ◽  
Ionomer Cement

Objective.The reinforcement effect of polymer-grade montmorillonite (PGV and PGN nanoclay) on Fuji-IX glass ionomer cement was investigated.Materials and Method.PGV and PGV nanoclays (2.0 wt%) were dispersed in the liquid portion of Fuji-IX. Fourier-transform infrared (FTIR) spectroscopy and gel permeation chromatography (GPC) were used to quantify acid-base reaction and the liquid portion of GIC. The mechanical properties (CS, DTS, FS, andEf) of cements (n= 20) were measured at 1 hour, 1 day, and 1 month. The microstructure was examined by cryo-SEM and TEM.Results. FTIR shows that the setting reaction involves the neutralisation of PAA by the glass powder which was linked with the formation of calcium and aluminium salt-complexes. The experimental GICs (C-V and C-N) exhibited mechanical properties in compliance to ISO standard requirement have higher values than Fuji-IX cement. There was no significant correlation of mechanical properties was found between C-V and C-N. The average Mw of Fuji-IX was 15,700 and the refractive index chromatogram peak area was 33,800. TEM observation confirmed that nanoclays were mostly exfoliated and dispersed in the matrix of GIC.Conclusion. The reinforcement of nanoclays in GICs may potentially produce cements with better mechanical properties without compromising the nature of polyacid neutralisation.

Comparative Evaluation of Mechanical Properties of Ceramic Reinforced Glass Ionomer Cement and Type IX GIC:An Invitro Study

2019 ◽  
Vol 10 (12) ◽  
pp. 35
Author(s):  
Nagalakshmi Chowdhary ◽  
N. K. Kiran ◽  
A. Lakshmi Priya ◽  
Rajashekar Reddy ◽  
Arvind Sridhara ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Comparative Evaluation ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Ionomer Cement

scholarly journals Structural and long-term mechanical properties from a resin-modified glass ionomer cement after various delays of light-activation

2018 ◽  
Vol 37 (6) ◽  
pp. 874-879 ◽  
Author(s):  
Marianne LAGARDE ◽  
Philippe FRANCOIS ◽  
Stéphane LE GOFF ◽  
Jean-Pierre ATTAL ◽  
Elisabeth DURSUN
Keyword(s):  
Mechanical Properties ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Light Activation ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

scholarly journals Mechanical properties of a resin-modified glass ionomer cement for luting: effect of adding spherical silica filler

2010 ◽  
Vol 29 (3) ◽  
pp. 253-261 ◽  
Author(s):  
Lihua E ◽  
Masao IRIE ◽  
Noriyuki NAGAOKA ◽  
Takashi YAMASHIRO ◽  
Kazuomi SUZUKI
Keyword(s):  
Mechanical Properties ◽  
Glass Ionomer Cement ◽  
Glass Ionomer ◽  
Silica Filler ◽  
Spherical Silica ◽  
Resin Modified Glass Ionomer ◽  
Ionomer Cement

scholarly journals Nanoclay addition to a conventional glass ionomer cements: Influence on physical properties

2014 ◽  
Vol 08 (04) ◽  
pp. 456-463 ◽  
Author(s):  
Muhammad A. Fareed ◽  
Artemis Stamboulis
Keyword(s):  
Physical Properties ◽  
Flexural Modulus ◽  
Setting Time ◽  
Glass Ionomer Cement ◽  
Gel Permeation Chromatography ◽  
Glass Ionomer ◽  
Reinforced Cement ◽  
Liquid Portion ◽  
Nanoclay Content ◽  
Diametral Tensile Strength

ABSTRACT Objective: The objective of the present study is to investigate the reinforcement effect of polymer-grade montmorillonite (PGN nanoclay) on physical properties of glass ionomer cement (GIC). Materials and Methods: The PGN nanoclay was dispersed in the liquid portion of GIC (HiFi, Advanced Healthcare, Kent, UK) at 1%, 2% and 4% (w/w). Fourier-transform infrared (FTIR) spectroscopy was used to quantify the polymer liquid of GICs after dispersion of nanoclay. The molecular weight (Mw) of HiFi liquid was determined by gel permeation chromatography. The compressive strength (CS), diametral-tensile strength, flexural strength (FS) and flexural modulus (Ef) of cements (n = 20) were measured after storage for 1 day, 1 week and 1 month. Fractured surface was analyzed by scanning electron microscopy. The working and setting time (WT and ST) of cements was measured by a modified Wilson's rheometer. Results: The FTIR results showed a new peak at 1041 cm−1 which increased in intensity with an increase in the nanoclay content and was related to the Si-O stretching mode in PGN nanoclay. The Mw of poly (acrylic acid) used to form cement was in the range of 53,000 g/mol. The nanoclay reinforced GICs containing <2% nanoclays exhibited higher CS and FS. The Ef cement with 1% nanoclays was significantly higher. The WT and ST of 1% nanoclay reinforced cement were similar to the control cement but were reduced with 2% and 4% nanoclay addition. Conclusion: The dispersion of nanoclays in GICs was achieved, and GIC containing 2 wt% nanoclay is a promising restorative materials with improved physical properties.

scholarly journals Mechanical Properties Enhancement of Conventional Glass Ionomer Cement by Adding Zirconium Oxide Micro and Nanoparticles

2019 ◽  
Vol 25 (2) ◽  
pp. 72-81 ◽  
Author(s):  
Ali N. Alobiedy ◽  
Ali H. Alhille ◽  
Ahmed R. Al-Hamaoy
Keyword(s):  
Mechanical Properties ◽  
Flexural Strength ◽  
Wear Rate ◽  
Zirconium Oxide ◽  
Dental Materials ◽  
Glass Ionomer Cement ◽  
Nano Particles ◽  
Glass Ionomer ◽  
Biaxial Flexural Strength ◽  
Ionomer Cement

The aim of this work is to enhance the mechanical properties of the glass ionomer cement GIC (dental materials) by adding Zirconium Oxide ZrO2 in both micro and nano particles. GIC were mixed with (3, 5 and 7) wt% of both ZrO2 micro and nanoparticles separately. Compressive strength (CS), biaxial flexural strength (BFS), Vickers Microhardness (VH) and wear rate losses (WR) were investigated. The maximum compression strength was 122.31 MPa with 5 wt. % ZrO2 micro particle, while 3wt% nanoparticles give highest Microhardness and biaxial flexural strength of 88.8 VHN and 35.79 MPa respectively. The minimum wear rate losses were 3.776µg/m with 7 wt. % ZrO2 nanoparticle. GIC-containing ZrO2 micro and nanoparticles is a promising restorative material with improved mechanical properties expect wear rate losses.  

scholarly journals Evaluation of Chitosan Modified Glass Ionomer Cement for Microleakage under Spectrophotometer - An In-Vitro Study

2021 ◽  
Vol 10 (33) ◽  
pp. 2769-2772
Author(s):  
Arjun Sajjeev ◽  
Ashwini Tumkur Shivkumar ◽  
Sowmya Halasabalu Kalgeri
Keyword(s):  
Social Sciences ◽  
Mechanical Properties ◽  
Glass Ionomer Cement ◽  
In Vitro Study ◽  
Restorative Material ◽  
Glass Ionomer ◽  
Evaluation Tool ◽  
Class V ◽  
Ionomer Cement

BACKGROUND Marginal integrity of glass ionomer as a restorative material is an important factor for the longevity of the restoration. Class V and cervical abrasions are the most critical and challenging lesions for restorations. The choice of material for restoring class V and cervical abrasions is glass ionomer cement (GIC). Sensitivity to moisture contact during the early setting stages is the drawback of GIC. To overcome the drawback, modifications of glass ionomer cement were made by the addition of chitosan. Chitosan (CH) is a natural linear polysaccharide obtained partially and fully by deacetylated chitin compounds, which are found in crab and shrimp shells, with properties like nontoxicity, biodegradability, bioadhesive, biocompatibility, and biorenewabilty which has led to its use in various fields. Thus, this study intended to evaluate the microleakage of conventional glass ionomer cement and chitosan modified glass ionomer cement using a spectrophotometer. METHODS 60 teeth extracted for orthodontic propose were selected for the study and randomly divided into two groups, class V cavities were prepared on the buccal surface and samples were restored with conventional glass ionomer cement and chitosan modified glass ionomer cement respectively, teeth were immersed in 0.5 % methylene blue for 24 hours and assessed using a spectrophotometer. RESULTS The data were analysed using the Unpaired T - test, and with statistical package for social sciences (SPSS) for Windows, version 25.0 (IBM Corp., Armonk, N.Y., USA). The confidence interval was set at 95 % and values of P < 0.05 were interpreted as statistically significant. CONCLUSIONS The study concluded that the addition of chitosan improves the mechanical properties of conventional glass ionomer cement, and a spectrophotometer can be used as a better evaluation tool in assessing microleakage. KEY WORDS Chitosan Modified GIC, Glass Ionomer Cement, Microleakage, Spectrophotometer

Sign in / Sign up

Export Citation Format

Share Document