scholarly journals Experimental Investigation of the Coprecipitation Method: An Approach to Obtain Magnetite and Maghemite Nanoparticles with Improved Properties

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Wilson Sacchi Peternele ◽  
Victoria Monge Fuentes ◽  
Maria Luiza Fascineli ◽  
Jaqueline Rodrigues da Silva ◽  
Renata Carvalho Silva ◽  
...  
Keyword(s):  
Low Cost ◽  
Morphological Characteristics ◽  
Coprecipitation Method ◽  
Maghemite Nanoparticles ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Chemical Coprecipitation ◽  
Transmission Electron ◽  
The Magnetic Field

Iron oxides that exhibit magnetic properties have been widely studied not only from an academic standpoint, but also for numerous applications in different fields of knowledge, such as biomedical and technological research. In this work, magnetite and maghemite nanoparticles were synthesized by chemical coprecipitation of FeCl2·4H2O and FeCl3·6H2O (proportion of 1 : 2) in three different cases using two bases (sodium hydroxide and hydroxide ammonium) as precipitants. The chemical coprecipitation method was selected for its simplicity, convenience, reproducibility, and low cost in the use of glassware. The nanostructured materials were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD) and magnetometry (VSM). The objective of this work is to study the variation in the morphological characteristics and physical properties of nanoparticles magnetic as a function of the different production processes. As observed by TEM, the materials obtained from the precipitating agent NH4OH are more uniform than those obtained with NaOH. From XRD pattern analysis, it appears that the obtained materials correspond to magnetite and maghemite and, from magnetometry VSM analysis, show high magnetization as a function of the magnetic field at room temperature, indicating that these materials are superparamagnetic.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Low-cost thermo-chemical process of TiO2 powder purification: Study of iterative gettering effect

2021 ◽  
Author(s):  
Nesrine Jaouabi ◽  
Wala Medfai ◽  
Marouan Khalifa ◽  
Rabia Zaghouani ◽  
Hatem Ezzaouia
Keyword(s):  
Porous Layer ◽  
Sacrificial Layer ◽  
Low Cost ◽  
Nir Spectroscopy ◽  
Tio2 Powder ◽  
X Ray Diffraction ◽  
X Ray ◽  
Density Reduction ◽  
Transmission Electron ◽  
Layer Effect

The titanium dioxide (TiO2) purity is very important for the TiO2-based applications making essential the impurities density reduction. In this study, we propose an efficient purification process of TiO2 powder in order to reduce impurities. The low-cost proposed approach is based on an iterative gettering (IG) process combining three main steps: (1) a porous TiO2 sacrificial layer formation (p-TiO2), (2) a rapid thermal annealing (RTA) of p-TiO2 powder in an infrared oven at 950°C under air permitting the residual impurities diffusion to the porous layer surface and (3) etching in acid solution to remove the porous layer. Effect of the proposed gettering process on purification efficiency was evaluated by different characterization techniques such as the transmission electron microscopy (TEM), the energy dispersive x-ray spectroscopy (EDX), the UV–Visible-NIR spectroscopy, the X-ray diffraction (XRD) and atomic absorption spectroscopy (AAS). The obtained results showed the efficient removal of metal impurities, such as Cu, Al, P, and Fe confirming the efficiency of the process improving the purity from 89% to 99.96%.

Corrosion protection performance of titania nanoparticles filled poly(4-methyl-5-vinylthiazole) applied on mild steel in 3.5% sodium chloride solution

2020 ◽  
pp. 875608792093930 ◽  
Author(s):  
I Pugazhenthi ◽  
S Mohammed Ghouse
Keyword(s):  
Mild Steel ◽  
Electrochemical Impedance ◽  
Low Cost ◽  
Nano Particles ◽  
Titania Nanoparticles ◽  
X Ray Diffraction ◽  
Corrosive Media ◽  
X Ray ◽  
Polymer Hybrid ◽  
Transmission Electron

Mild steel materials have wide applications in marine construction, because they are low cost, available and easy to handle. However, they have to be protected from corrosive media by coating with polymer hybrid materials. This paper focuses on the anticorrosive properties of poly(4-methyl-5-vinylthiazole) PVTZ coatings on mild steel. Further the coating resistance is enhanced by incorporating Titania Nano particles (TiO2NPs). The nanoparticles were evaluated using X-ray diffraction studies (XRD) and transmission electron microscopy (TEM). PVTZ and its TiO2 nanocomposite were coated on mild steel. Their anticorrosive behavior was analyzed by potentiodynamic polarization and electrochemical impedance spectroscopy in 3.5% (w/v) NaCl.

scholarly journals A Novel X-Ray Radiation Sensor Based on Networked SnO2 Nanowires

2019 ◽  
Vol 9 (22) ◽  
pp. 4878 ◽  
Author(s):  
Jae-Hun Kim ◽  
Ali Mirzaei ◽  
Hyoun Woo Kim ◽  
Hong Joo Kim ◽  
Phan Quoc Vuong ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Low Cost ◽  
X Rays ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Radiation Sensor ◽  
Sno2 Nanowires ◽  
Radiation Sensors

X-Ray radiation sensors that work at room temperature are in demand. In this study, a novel, low-cost real-time X-ray radiation sensor based on SnO2 nanowires (NWs) was designed and tested. Networked SnO2 NWs were produced via the vapor–liquid–solid technique. X-ray diffraction (XRD), transmission electron microscopy (TEM) and field emission scanning electron microscopy (SEM) analyses were used to explore the crystallinity and morphology of synthesized SnO2 NWs. The fabricated sensor was exposed to X-rays (80 kV, 0.0–2.00 mA) and the leakage current variations were recorded at room temperature. The SnO2 NWs sensor showed a high and relatively linear response with respect to the X-ray intensity. The X-ray sensing results show the potential of networked SnO2 NWs as novel X-ray sensors.

scholarly journals Characterization of Pr-Doped LaF3 Nanoparticles Synthesized by Different Variations of Coprecipitation Method

2019 ◽  
Vol 2019 ◽  
pp. 1-17 ◽  
Author(s):  
M. S. Pudovkin ◽  
D. A. Koryakovtseva ◽  
E. V. Lukinova ◽  
S. L. Korableva ◽  
R. Sh. Khusnutdinova ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Optical Spectroscopy ◽  
Coprecipitation Method ◽  
Luminescence Lifetime ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Hall Method ◽  
Stoichiometric Proportion

A set of Pr3+:LaF3 nanoparticles (NPs) were synthesized via coprecipitation method at three stoichiometric proportions of La(NO3)3, Pr(NO3)3, and NaF (1 : 0.8, 1 : 1, and 1 : 6, respectively). Two ways of mixing of the La(NO3)3, Pr(NO3)3, and NaF solutions (dropwise and swift addition) were used. One sample was subjected to microwave (MW) treatment for 30, 90, and 180 min. All the samples were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). For all the samples, optical spectroscopy experiments were carried out. The XRD data were analyzed via the Debye-Scherrer and Williamson-Hall methods. It was revealed that the way of mixing of the La(NO3)3, Pr(NO3)3, and NaF solutions strongly affects the shape of the NPs. The slow dropwise addition of the NaF solution leads to the plate-like NP (PLNP) formation; otherwise, the swift addition of the NaF solution leads to the formation of more sphere-like NPs (SLNPs). The size and regularity in shape of the NP increase with the increasing stoichiometric proportion of La(NO3)3, Pr(NO3)3, and NaF from 1 : 0.8 to 1 : 6. The size and regularity in shape of the SLNPs increase with the increasing time of MW treatment. The Debye-Scherrer and Williamson-Hall methods confirmed the anisotropic shape of the PLNPs. The Williamson-Hall method showed that the values of strain are almost similar for all the samples (around 14∗10-4). Optical spectroscopy experiments revealed that although all the samples have an equal chemical composition, the luminescence lifetimes for different samples differ between each other. The luminescence lifetime of the PLNPs is less than that of the SLNPs having an equal stoichiometric proportion of La(NO3)3, Pr(NO3)3, and NaF. The luminescence lifetime of the 1 : 1 SLNPs increases with the increasing time of MW treatment.

scholarly journals Bulky Macroporous TiO2Photocatalyst with Cellular Structure via Facile Wood-Template Method

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Qingfeng Sun ◽  
Yun Lu ◽  
Jinchun Tu ◽  
Dongjiang Yang ◽  
Jun Cao ◽  
...  
Keyword(s):  
Cellular Structure ◽  
Anatase Phase ◽  
Dip Coating ◽  
X Ray Diffraction ◽  
Photocatalytic Ability ◽  
Xrd Pattern ◽  
X Ray ◽  
Sem Image ◽  
Transmission Electron ◽  
Wood Template

We report a bulky macroporous TiO2particles with cellular structure prepared in the presence of wood slices as template. Firstly, TiO2sol was coated onto the wood slices by repeated dip-coating process. Then, after calcinations at 550°C, the wood template could be removed, and the bulky TiO2structure was obtained. The prepared samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), and transmission electron microscope (TEM) techniques. XRD pattern confirmed the crystalline phase of the wood-templated TiO2is anatase phase. And interestingly, from the observation of SEM image, the wood-templated TiO2inherited the initial cellular structures of birch lumber (B. albosinensis Burk), and numerous macropores were observed in the sample. Meanwhile, the wood-templated TiO2presented a superior photocatalytic ability to decompose Rhodamine B (RhB) under ultraviolet irradiation.

Novel synthesis of AlN nanowires with controlled diameters

2001 ◽  
Vol 16 (11) ◽  
pp. 3133-3138 ◽  
Author(s):  
Jun Liu ◽  
X. Zhang ◽  
Yingjiu Zhang ◽  
Rongrui He ◽  
Jing Zhu
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
High Efficiency ◽  
Low Cost ◽  
X Ray Diffraction ◽  
Synthesis Mechanism ◽  
X Ray ◽  
Novel Synthesis ◽  
Transmission Electron ◽  
New Synthesis

A relatively low-cost, high-efficiency method is reported to synthesize AlN nanowires, using carbon nanotubes as templates. The AlN nanowires were fabricated at 1100 °C, for 60 min. The diameters of the product could be roughly controlled by the sizes of carbon nanotubes selected as starting materials. The AlN nanowires obtained were among the thinnest ever known. X-ray diffraction, selected-area diffraction, energy dispersive spectroscopy, and high-resolution transmission electron microscopy, etc. were employed to characterize the products, which were found to be single crystals with some defects. The axes of the nanowires are normal to {1010} crystal planes. A new synthesis mechanism is proposed.

Influence of Magnetic Field on Magnetic Properties of Electrodeposited Co-Ni-P Nanowires

2014 ◽  
Vol 24 (3S1) ◽  
pp. 90-94 ◽  
Author(s):  
Le Tuan Tu ◽  
Luu Van Thiem ◽  
Pham Duc Thang
Keyword(s):  
Magnetic Field ◽  
Magnetic Properties ◽  
Room Temperature ◽  
Hysteresis Loops ◽  
Vibrating Sample Magnetometry ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Structure And Morphology ◽  
The Magnetic Field

The magnetic properties in Co-Ni-P nanowires arrays with diameter of 200 nm were investigated. All the samples were prepared by electrodeposition method with pH of 5.5 and at room temperature. During the deposition, a magnetic field in range of 0 - 750 Oe was applied parallel to the wires axis. The crystalline structure and morphology of the samples were characterized by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM), respectively. The hysteresis loops were measured at room temperature using vibrating sample magnetometry (VSM). The mixture of hcp phases of the Co-Ni-P based nanowires has been indicated by the XRD pattern. The obtained results show that with 750 Oe magnetic field applied during deposition we can obtain maximum coercivity value (2180 Oe). The \(M_{r}/M_{s}\) ratio was rapid increased when the magnetic field changed from 0 Oe to 750 Oe.

Preparation and Application of Carboxyl-Functioned Magnetic Nanoparticles for Arylsulfatase Immobilization

2016 ◽  
Vol 13 (10) ◽  
pp. 7408-7415
Author(s):  
Yongxing Li ◽  
Qiong Xiao ◽  
Qin Yin ◽  
Hui Ni ◽  
Yanbing Zhu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Magnetic Nanoparticles ◽  
Vibrating Sample Magnetometry ◽  
X Ray Diffraction ◽  
Sulfate Ester ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Mean Diameter ◽  
Diffraction Patterns

Arylsulfatase, one of a few enzymes that can enhance the gelling strength of agar by cleaving the sulfate ester bonds in agar, was covalently immobilized with carboxyl functioned magnetic nanoparticles (CMNPs). The resultant CMNPs and immobilized arylsulfatase were characterized by transmission electron microscopy (TEM), Dynamic Light scattering (DLS), X-ray diffraction (XRD), vibrating sample magnetometry (VSM) and thermogravimetric analysis (TGA). The TEM result indicated that the CMNPs and immobilized arylsulfatase had a similar mean particle size of 10 nm. The arylsulfatase-CMNPs had a mean diameter of 1200 nm in aqueous solution determined by the DLS, which was much bigger than the CMNPs (433.6 nm). The different sizes demonstrated that the arylsulfatase was coated on CMNPs successfully. XRD showed that diffraction patterns of the CMNPs and arylsulfatase-CMNPs were close to the standard XRD pattern of Fe3O4. Saturation magnetizations were 52.1 emu/g for carriers and 47.9 emu/g for immobilized arylsulfatase, which indicated that the particles had superparamagnetic characteristics. The TGA revealed that the amount of arylsulfatase bound to the surface of CMNPs was 5.65%. The arylsulfatase exhibited better thermal stability and reusability after immobilization, the immobilized arylsulfatase can retain more than 50% enzyme activity up to the 9th cycle.

Preparation of Single-Crystal BiOCl Nanorods via Surfactant Soft-Template Inducing Growth

2005 ◽  
Vol 23 ◽  
pp. 79-82 ◽  
Author(s):  
Chuan Bao Cao ◽  
Ruitao Lv ◽  
He Sun Zhu
Keyword(s):  
Electron Microscope ◽  
Single Crystal ◽  
Saed Pattern ◽  
Soft Template ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Triton X

Nanorods of a compound semiconductor, BiOCl, have been prepared from BiCl3 solutions containing a nonionic surfactant, t-octyl-(OCH2CH2)xOH, x=9, 10 (Triton X-100). Powder X-ray diffraction (XRD) pattern indicated that the product was pure tetragonal phase bismoclite (BiOCl). The product was also characterized by the techniques of scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS) and transmission electron microscope (TEM). The as-obtained BiOCl nanorods possess mean diameters less than 40nm and lengths ranging in 160-400nm. Selected area electron diffraction (SAED) pattern showed the single-crystal nature of as-prepared BiOCl nanorods. The growth mechanism of BiOCl nanorods has also been proposed.

Sign in / Sign up

Export Citation Format

Share Document