scholarly journals Aqueous Colloidal Stability of Graphene Oxide and Chemically Converted Graphene

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Swarnima Kashyap ◽  
Shashank Mishra ◽  
Shantanu K. Behera
Keyword(s):  
Graphene Oxide ◽  
Colloidal Stability ◽  
Low Ph ◽  
Particle Charge ◽  
Chemically Converted Graphene ◽  
Ph Scale ◽  
Ph Range ◽  
Average Size ◽  
Poor Stability ◽  
The Ideal

Graphene oxide (GO) was prepared by modified Hummer’s method, and chemically converted graphene (CCG) was prepared by further reduction of the aqueous GO colloid. The effect of pH on particle size, particle charge, and light absorption of the aqueous colloids of GO and CCG was studied with titration against HCl or NaOH, to find the ideal characteristics for a stable dispersion. The GO colloid was stable in the pH range of 4–11, whereas the CCG colloid gained stability at a relatively narrower pH range of 7–10. Poor stability of the colloids was observed for both GO and CCG colloids at both extremes of the pH scale. Both of the colloids exhibited average size of ~1 micron in the low pH range, whereas for higher pH the size ranged between 300 and 500 nm. The UV-Vis spectra showed absorption peak at 230 nm for GO colloids that shifted to 260 nm for the CCG colloid. Such shift can be ascribed to restoring of electronic conjugation of the C=C bonds in CCG.

scholarly journals Defect-Rich Heterogeneous MoS2/rGO/NiS Nanocomposite for Efficient pH-Universal Hydrogen Evolution

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 662 ◽  
Author(s):  
Guangsheng Liu ◽  
Kunyapat Thummavichai ◽  
Xuefeng Lv ◽  
Wenting Chen ◽  
Tingjun Lin ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Hydrogen Evolution ◽  
Hydrogen Evolution Reaction ◽  
Active Sites ◽  
Reduced Graphene ◽  
Heterogeneous Interfaces ◽  
Wide Ph Range ◽  
Ph Range ◽  
A Current ◽  
Poor Stability

Molybdenum disulfide (MoS2) has been universally demonstrated to be an effective electrocatalytic catalyst for hydrogen evolution reaction (HER). However, the low conductivity, few active sites and poor stability of MoS2-based electrocatalysts hinder its hydrogen evolution performance in a wide pH range. The introduction of other metal phases and carbon materials can create rich interfaces and defects to enhance the activity and stability of the catalyst. Herein, a new defect-rich heterogeneous ternary nanocomposite consisted of MoS2, NiS and reduced graphene oxide (rGO) are synthesized using ultrathin αNi(OH)2 nanowires as the nickel source. The MoS2/rGO/NiS-5 of optimal formulation in 0.5 M H2SO4, 1.0 M KOH and 1.0 M PBS only requires 152, 169 and 209 mV of overpotential to achieve a current density of 10 mA cm−2 (denoted as η10), respectively. The excellent HER performance of the MoS2/rGO/NiS-5 electrocatalyst can be ascribed to the synergistic effect of abundant heterogeneous interfaces in MoS2/rGO/NiS, expanded interlayer spacings, and the addition of high conductivity graphene oxide. The method reported here can provide a new idea for catalyst with Ni-Mo heterojunction, pH-universal and inexpensive hydrogen evolution reaction electrocatalyst.

Investigation of the Range of a Plastic pH Sensor Based on a Dibasic Ionophore

1992 ◽  
Vol 45 (2) ◽  
pp. 435 ◽  
Author(s):  
TJ Cardwell ◽  
RW Cattrall ◽  
LW Deady ◽  
KA Murphy
Keyword(s):  
Positive Charge ◽  
Ph Sensor ◽  
Low Ph ◽  
Membrane Electrode ◽  
Neutral Carrier ◽  
Ph Values ◽  
Response Range ◽  
Ph Scale ◽  
Ph Range ◽  
Sensitive Membrane

A study is reported of the use of a neutral carrier reagent containing two nitrogen atoms with very different basicities in a pH-sensitive membrane electrode with a view to obtaining a broad response range. This electrode responds well in the pH region of 6-12 but suffers anion interference in the region of pH 2-6. A study is included of the effect of adding various amounts of potassium tetrakis(4-chloropheny1)borate as an anion suppressing reagent to the membrane in order to reduce the anion interference at low pH values. The conclusion is drawn that an extension to the working pH range is not possible with this approach unless controlled amounts of anion suppressing reagent can be provided to approximately balance the positive charge of the carrier in each region of the pH scale.

scholarly journals Macrophage-Laden Gold Nanoflowers Embedded with Ultrasmall Iron Oxide Nanoparticles for Enhanced Dual-Mode CT/MR Imaging of Tumors

Pharmaceutics ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 995
Author(s):  
Yucheng Peng ◽  
Xiaomeng Wang ◽  
Yue Wang ◽  
Yue Gao ◽  
Rui Guo ◽  
...  
Keyword(s):  
Iron Oxide ◽  
Mr Imaging ◽  
Iron Oxide Nanoparticles ◽  
Colloidal Stability ◽  
Pamam Dendrimer ◽  
Great Promise ◽  
Oxide Nanoparticles ◽  
Dual Mode ◽  
Gold Nanoflowers ◽  
Average Size

The design of multimodal imaging nanoplatforms with improved tumor accumulation represents a major trend in the current development of precision nanomedicine. To this end, we report herein the preparation of macrophage (MA)-laden gold nanoflowers (NFs) embedded with ultrasmall iron oxide nanoparticles (USIO NPs) for enhanced dual-mode computed tomography (CT) and magnetic resonance (MR) imaging of tumors. In this work, generation 5 poly(amidoamine) (G5 PAMAM) dendrimer-stabilized gold (Au) NPs were conjugated with sodium citrate-stabilized USIO NPs to form hybrid seed particles for the subsequent growth of Au nanoflowers (NFs). Afterwards, the remaining terminal amines of dendrimers were acetylated to form the dendrimer-stabilized Fe3O4/Au NFs (for short, Fe3O4/Au DSNFs). The acquired Fe3O4/Au DSNFs possess an average size around 90 nm, display a high r1 relaxivity (1.22 mM−1 s−1), and exhibit good colloidal stability and cytocompatibility. The created hybrid DSNFs can be loaded within MAs without producing any toxicity to the cells. Through the mediation of MAs with a tumor homing and immune evasion property, the Fe3O4/Au DSNFs can be delivered to tumors more efficiently than those without MAs after intravenous injection, thus significantly improving the MR/CT imaging performance of tumors. The developed MA-mediated delivery system may hold great promise for enhanced tumor delivery of other contrast agents or nanomedicines for precision cancer nanomedicine applications.

New insights into the colloidal stability of graphene oxide in aquatic environment: Interplays of photoaging and proteins

2021 ◽  
pp. 117213
Author(s):  
Binbin Sun ◽  
Yinqing Zhang ◽  
Ruixuan Li ◽  
Kunkun Wang ◽  
Bowen Xiao ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Aquatic Environment ◽  
Colloidal Stability

scholarly journals Common Loon, Gavia immer, Breeding Success in Relation to Lake pH and Lake Size Over 25 Years

2009 ◽  
Vol 123 (2) ◽  
pp. 146 ◽  
Author(s):  
Robert Alvo
Keyword(s):  
Breeding Success ◽  
Low Ph ◽  
Single Pair ◽  
Gavia Immer ◽  
Common Loon ◽  
Sulphur Deposition ◽  
Acidic Lakes ◽  
Ph Range ◽  
Lake Size ◽  
Critical Ph

I monitored Common Loon (Gavia immer) breeding success in relation to lake pH (range 4.0–8.5) between 1982 and 2007 on 38 single-pair lakes (5–88 ha) in the Sudbury, Ontario, area. No chicks fledged on lakes with pH < 4.4. Chicks fledged on lakes with slightly higher pH only if the lakes were relatively large. Acidic lakes became less acidic as sulphur dioxide emissions from the Sudbury smelters and sulphur deposition from other long-range sources decreased. Two lakes initially too acidic to support successful loon reproduction eventually had successful reproduction. One loon pair used two large acidic lakes (combined area 140 ha) connected by shallow rapids, and one of the adults made extremely long dives (average = 99 s) while foraging for the chicks. One chick died on that lake after apparently ingesting a very large food item; the lack of smaller items was attributed to the lake’s acidity. My results suggest that a shortage of food for chicks is the main reason why low pH reduces breeding success. I suggest that, for lakes without high levels of dissolved organic carbon (DOC), the critical pH for loon breeding success is approximately 4.3, and the suboptimal pH is approximately 4.4–6.0.

Tuning the cationic ratio of Fe1CoxNiyP integrated on Vertically aligned reduced graphene oxide array via electroless plating as efficient self-supported bifunctional electrocatalyst for water splitting

2021 ◽  
pp. 1-33
Author(s):  
Kaiming Guo ◽  
Firdoz Shaik ◽  
Jine Yang ◽  
Bin Jiang
Keyword(s):  
Graphene Oxide ◽  
Reduced Graphene Oxide ◽  
Water Splitting ◽  
Electroless Plating ◽  
Cost Effective ◽  
Bifunctional Electrocatalyst ◽  
Reduced Graphene ◽  
Wide Ph Range ◽  
Vertically Aligned ◽  
Ph Range

Abstract Water splitting is considered as a potential sustainable and green technology for producing mass hydrogen and oxygen. A cost-effective self-supported stable electrocatalyst with excellent electrocatalytic performance in a wide pH range is greatly required for water splitting. This work reports on the synthesis and anchoring of Fe1CoxNiyP nanoparticles on vertically aligned reduced graphene oxide array (VrGO) via electroless plating. The catalytic activity of Fe1CoxNiyP nanoparticles is tuned finely by tailoring the cationic ratio of Co and Ni. Fe1Co2Ni1P/VrGO exhibits the lowest overpotential (58 and 110 mV) at 10 mA cm−2 and lowest tafel slope (31 and 33 mV dec−1) for hydrogen evolution reaction in 1.0 M KOH and 0.5 M H2SO4 respectively. Fe1Co1Ni2P/VrGO exhibits the lowest overpotential (173 mV) at 10 mA cm−2 with lowest tafel slope (47 mV dec-1) for oxygen evolution reaction. The enhanced performance of the electrocatalyst is attributed to improved electrical conductivity, synergistic effects and beneficial electronic states caused by the appropriate atomic ratio of Co and Ni in the bifunctional electrocatalyst. This study helps to explore the effect of variable cationic ratio in the cost-effective ternary iron group metal phosphides electrocatalysts to achieve enhanced electrocatalytic performance for water splitting in a wide pH range.

scholarly journals THE ABSORPTION SPECTRUM OF VISUAL PURPLE

1938 ◽  
Vol 21 (4) ◽  
pp. 411-430 ◽  
Author(s):  
Aurin M. Chase ◽  
Charles Haig
Keyword(s):  
Absorption Spectrum ◽  
Absorption Spectra ◽  
Light Transmission ◽  
Low Ph ◽  
The Other ◽  
Distilled Water ◽  
Color Purity ◽  
Chemical Combination ◽  
Ph Range ◽  
Sensitive Group

The absorption spectra of visual purple solutions extracted by various means were measured with a sensitive photoelectric spectrophotometer and compared with the classical visual purple absorption spectrum. Hardening the retinas in alum before extraction yielded visual purple solutions of much higher light transmission in the blue and violet, probably because of the removal of light-dispersing substances. Re-extraction indicated that visual purple is more soluble in the extractive than are the other colored retinal components. However, the concentration of the extractive did not affect the color purity of the extraction but did influence the keeping power. This suggests a chemical combination between the extractive and visual purple. The pH of the extractive affected the color purity of the resulting solution. Over the pH range from 5.5 to 10.0, the visual purple color purity was greatest at the low pH. Temperature during extraction was also effective, the color purity being greater the higher the temperature, up to 40°C. Drying and subsequent re-dissolving of visual purple solutions extracted with digitalin freed the solution of some protein impurities and increased its keeping power. Dialysis against distilled water seemed to precipitate visual purple from solution irreversibly. None of the treatments described improved the symmetry of the unbleached visual purple absorption spectrum sufficiently for it to resemble the classical absorption spectrum. Therefore it is very likely that the classical absorption spectrum is that of the light-sensitive group only and that the absorption spectra of our purest unbleached visual purple solutions represent the molecule as a whole.

scholarly journals One-Step Synthesis of Diamine-Functionalized Graphene Quantum Dots from Graphene Oxide and Their Chelating and Antioxidant Activities

Nanomaterials ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 104 ◽  
Author(s):  
Rabeb El-Hnayn ◽  
Laetitia Canabady-Rochelle ◽  
Christophe Desmarets ◽  
Lavinia Balan ◽  
Hervé Rinnert ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Graphene Oxide ◽  
Colloidal Stability ◽  
Antioxidant Activities ◽  
Graphene Quantum Dots ◽  
Average Diameter ◽  
Functionalized Graphene ◽  
One Step ◽  
Low Cytotoxicity ◽  
Health Applications

2,2’-(Ethylenedioxy)bis(ethylamine)-functionalized graphene quantum dots (GQDs) were prepared under mild conditions from graphene oxide (GO) via oxidative fragmentation. The as-prepared GQDs have an average diameter of ca. 4 nm, possess good colloidal stability, and emit strong green-yellow light with a photoluminescence (PL) quantum yield of 22% upon excitation at 375 nm. We also demonstrated that the GQDs exhibit high photostability and the PL intensity is poorly affected while tuning the pH from 1 to 8. Finally, GQDs can be used to chelate Fe(II) and Cu(II) cations, scavenge radicals, and reduce Fe(III) into Fe(II). These chelating and reducing properties that associate to the low cytotoxicity of GQDs show that these nanoparticles are of high interest as antioxidants for health applications.

Sign in / Sign up

Export Citation Format

Share Document