scholarly journals Vibration Characteristics of Piezoelectric Microbeams Based on the Modified Couple Stress Theory

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
R. Ansari ◽  
M. A. Ashrafi ◽  
S. Hosseinzadeh
Keyword(s):  
Boundary Conditions ◽  
Couple Stress ◽  
Natural Frequencies ◽  
Couple Stress Theory ◽  
Equations Of Motion ◽  
Modified Couple Stress Theory ◽  
Beam Model ◽  
Governing Equations ◽  
Stress Theory ◽  
Modified Couple Stress

The vibration behavior of piezoelectric microbeams is studied on the basis of the modified couple stress theory. The governing equations of motion and boundary conditions for the Euler-Bernoulli and Timoshenko beam models are derived using Hamilton’s principle. By the exact solution of the governing equations, an expression for natural frequencies of microbeams with simply supported boundary conditions is obtained. Numerical results for both beam models are presented and the effects of piezoelectricity and length scale parameter are illustrated. It is found that the influences of piezoelectricity and size effects are more prominent when the length of microbeams decreases. A comparison between two beam models also reveals that the Euler-Bernoulli beam model tends to overestimate the natural frequencies of microbeams as compared to its Timoshenko counterpart.

Size Effect on Natural Frequency of Cantilever Micro-Beams Based on a Modified Couple Stress Theory

2013 ◽  
Vol 694-697 ◽  
pp. 221-224 ◽  
Author(s):  
Sheng Li Kong
Keyword(s):  
Size Effect ◽  
Natural Frequency ◽  
Couple Stress ◽  
Natural Frequencies ◽  
Couple Stress Theory ◽  
Modified Couple Stress Theory ◽  
Beam Model ◽  
Stress Theory ◽  
Modified Couple Stress ◽  
The Difference

The natural frequency of cantilever micro-beams is solved analytically on the basis of modified couple stress theory. The governing equations are obtained by a combination of the basic equations of modified couple stress theory and Hamiltons principle. The size effect on natural frequencies of the cantilever micro-beams is analyzed. It is found that the natural frequencies of the cantilever micro-beams predicted by the newly model are size-dependent. The difference between the natural frequencies predicted by the newly established model and classical beam model is assessed.

Vibration of size-dependent functionally graded sandwich microbeams with different boundary conditions based on the modified couple stress theory

2017 ◽  
Vol 22 (2) ◽  
pp. 220-247 ◽  
Author(s):  
Nuttawit Wattanasakulpong ◽  
Arisara Chaikittiratana ◽  
Sacharuck Pornpeerakeat
Keyword(s):  
Boundary Conditions ◽  
Couple Stress ◽  
Volume Fraction ◽  
Couple Stress Theory ◽  
Slenderness Ratio ◽  
Modified Couple Stress Theory ◽  
Functionally Graded ◽  
Governing Equations ◽  
Stress Theory ◽  
Modified Couple Stress

This paper investigates flexural vibration of functionally graded sandwich microbeams supported by different axially immovable boundary conditions. The governing equations of free vibration problem are based on Timoshenko beam theory and the modified couple stress theory which are taking into account the important effects of shear deformation, rotary inertia and material length scale parameter. To solve the governing equations presented in the forms of coupled differential equations for vibration analysis of the beams with various boundary conditions, an effective tool, namely Chebyshev collocation method, is employed to find out accurate solutions with many important parametric studies. The effects of material volume fraction index, layer thickness ratio, slenderness ratio, boundary condition, temperature rise, etc. on natural frequencies of the beams are taken into account and discussed in details. The numerical results of the beams in ambient temperature and high thermal environment are presented in several tables and figures that can serve as benchmarks for further investigations in the field of FG sandwich microbeam analysis.

Size-dependent free vibration analysis of a three-layered exponentially graded nano-/micro-plate with piezomagnetic face sheets resting on Pasternak’s foundation via MCST

2017 ◽  
Vol 22 (1) ◽  
pp. 55-86 ◽  
Author(s):  
Mohammad Arefi ◽  
Masoud Kiani ◽  
Ashraf M Zenkour
Keyword(s):  
Couple Stress ◽  
Couple Stress Theory ◽  
Equations Of Motion ◽  
Free Vibration Analysis ◽  
Modified Couple Stress Theory ◽  
Stress Theory ◽  
Modified Couple Stress ◽  
Material Length Scale ◽  
Material Length ◽  
Exponentially Graded

The present work is devoted to the free vibration analysis of elastic three-layered nano-/micro-plate with exponentially graded core and piezomagnetic face-sheets using the modified couple stress theory. To capture size-dependency for a nano-/micro-sized rectangular plate, the couple stress theory is used as a non-classical continuum theory. The rectangular elastic three-layered nano-/micro-plate is resting on Pasternak’s foundation. The present model contains one material length scale parameter and can capture the size effect. Material properties of the core are supposed to vary along the thickness direction based on the exponential function. The governing equations of motion are derived from Hamilton’s principle based on the modified couple stress theory and first-order shear deformation theory. The analytical solution is presented to solve seven governing equations of motion using Navier’s solution. Eventually the natural frequency is scrutinized for different side length ratio, thickness ratio, inhomogeneity parameter, material length scale, and parameters of foundation numerically.

A modified couple stress theory for buckling analysis of higher order inhomogeneous microbeams with porosities

2018 ◽  
Vol 233 (8) ◽  
pp. 2855-2866 ◽  
Author(s):  
Farzad Ebrahimi ◽  
Fateme Mahmoodi
Keyword(s):  
Boundary Conditions ◽  
Power Law ◽  
Couple Stress ◽  
Volume Fraction ◽  
Couple Stress Theory ◽  
Modified Couple Stress Theory ◽  
Functionally Graded ◽  
Stress Theory ◽  
Various Boundary Conditions ◽  
Modified Couple Stress

In this paper, buckling behavior of a higher order functionally graded microbeam with porosities is investigated based on the modified couple stress theory and the exact position of the neutral axis. Porosities are evenly and unevenly distributed inside the functionally graded microbeam. Material properties of the functionally graded microbeam are assumed to vary in the thickness direction through a modified form of power-law distribution in which the volume fraction of porosities is considered. The governing equations are derived by using Hamilton's principle and an analytical method is employed to solve these equations for various boundary conditions. The present formulation and numerical results demonstrate a good agreement with some available cases in the literature. Influences of several important parameters such as power-law exponent, porosity distributions, porosity volume fraction, slenderness ratio, and various boundary conditions on buckling loads of porous functionally graded microbeams are investigated and discussed in detail.

FREE VIBRATION OF MICROTUBULES AS ELASTIC SHELL MODEL BASED ON MODIFIED COUPLE STRESS THEORY

2015 ◽  
Vol 15 (03) ◽  
pp. 1550037 ◽  
Author(s):  
YAGHOUB TADI BENI ◽  
M. KARIMI ZEVERDEJANI
Keyword(s):  
Cylindrical Shell ◽  
Shell Model ◽  
Couple Stress ◽  
Couple Stress Theory ◽  
Elastic Shell ◽  
Modified Couple Stress Theory ◽  
Experimental Results ◽  
Beam Model ◽  
Stress Theory ◽  
Modified Couple Stress

In this study, first, the thin cylindrical shell theory was derived from the modified couple stress theory and, afterwards, the vibration of protein microtubules (MTs) was investigated using the developed model. In order to model protein MTs more precisely, the cylindrical micro-shell model was used. Also, to take account of small size effects, equations of motion were obtained on the basis of the modified couple stress theory. For this purpose, first, using Hamilton's principle, vibration equations of cylindrical shell with boundary conditions were derived from the modified couple stress theory. Finally, the effects of size parameters, MT dimensions, and the medium surrounding on the axial and circumferential vibration frequency of the MT were examined. It should be noted that the results obtained from the cylindrical micro-shell model, unlike those from the beam model, have lower dependency on MT length, but they have extreme dependency on MT thickness and radius. In the end, it is worth noting that the model developed in this study can predict experimental results with greater precision compared to classic models. In other words, this model narrows the gap existing between experimental results and previous models and theories.

Magnetic field effect on free vibration of smart rotary functionally graded nano/microplates: A comparative study on modified couple stress theory and nonlocal elasticity theory

2018 ◽  
Vol 29 (11) ◽  
pp. 2492-2507 ◽  
Author(s):  
Mohammad Hassan Shojaeefard ◽  
Hamed Saeidi Googarchin ◽  
Mohammad Mahinzare ◽  
Seyed Ahmad Eftekhari
Keyword(s):  
Elastic Material ◽  
Nonlocal Elasticity ◽  
Couple Stress ◽  
Couple Stress Theory ◽  
Nonlocal Elasticity Theory ◽  
Modified Couple Stress Theory ◽  
Functionally Graded ◽  
Governing Equations ◽  
Stress Theory ◽  
Modified Couple Stress

In this article, free vibration behavior of a rotating nano/microcircular plate constructed from functionally graded magneto-elastic material is simulated with the first-order shear deformation theory. For the sake of comparison, the nonlocal elasticity theory and the modified couple stress theory are employed to implement the small size effect in the natural frequencies behavior of the nano/microcircular plate. The governing equations of motion for functionally graded magneto-elastic material nano/microcircular plates are derived based on Hamilton’s principle; comparing the obtained results with those in the literature, they are in a good agreement. Finally, the governing equations are solved using the differential quadrature method. It is shown that the vibrational characteristics of functionally graded magneto-elastic material nano/microcircular plates are significantly affected by non-dimensional angular velocity, size dependency of the Eringen’s and the modified couple stress theories, and power law index for clamped and hinged boundary conditions. Results show that a critical point occurs by increasing the angular velocity and the effect of several parameters are changed after this point.

Sign in / Sign up

Export Citation Format

Share Document