scholarly journals Dynamic Response of a Thick Piezoelectric Circular Cylindrical Panel: An Exact Solution

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Atta Oveisi ◽  
Mohammad Gudarzi ◽  
Seyyed Mohammad Hasheminejad
Keyword(s):  
Steady State ◽  
Mathematical Formulation ◽  
Three Dimensional ◽  
Cylindrical Panel ◽  
Mode Shapes ◽  
Steady State Response ◽  
Two Dimensional ◽  
Finite Element Software ◽  
State Response ◽  
Thick Shells

One of the interesting fields that attracted many researchers in recent years is the smart structures. The piezomaterials, because of their ability in converting both mechanical stress and electricity to each other, are very applicable in this field. However, most of the works available used various inexact two-dimensional theories with certain types of simplification, which are inaccurate in some applications such as thick shells while, in some applications due to request of large displacement/stress, thick piezoelectric panel is needed and two-dimensional theories have not enough accuracy. This study investigates the dynamic steady state response and natural frequency of a piezoelectric circular cylindrical panel using exact three-dimensional solutions based on this decomposition technique. In addition, the formulation is written for both simply supported and clamped boundary conditions. Then the natural frequencies, mode shapes, and dynamic steady state response of the piezoelectric circular cylindrical panel in frequency domain are validated with commercial finite element software (ABAQUS) to show the validity of the mathematical formulation and the results will be compared, finally.

Analytical Method of Response of Piping System With Nonlinear Support

2000 ◽  
Vol 122 (4) ◽  
pp. 437-442
Author(s):  
Shigeru Aoki ◽  
Takeshi Watanabe
Keyword(s):  
Approximate Solution ◽  
Steady State ◽  
Analytical Method ◽  
Mode Shapes ◽  
Piping System ◽  
Steady State Response ◽  
Response Curves ◽  
State Response ◽  
Damping Characteristics ◽  
Nonlinear Support

This paper deals with steady-state response of the piping system with nonlinear support having hysteresis damping characteristics. Considering the energy loss for contact with a support, an analytical method of approximate solution for the beam, a one-span model of the piping system, with quadrilateral hysteresis loop characteristics is presented. Some numerical results of the approximate solution for the response curves and the mode shapes are shown. [S0094-9930(00)00204-3]

scholarly journals Structural Damage Detection Using Slopes of Longitudinal Vibration Shapes

2015 ◽  
Author(s):  
W. Xu ◽  
W. D. Zhu ◽  
S. A. Smith
Keyword(s):  
Steady State ◽  
Damage Detection ◽  
Structural Damage ◽  
Longitudinal Vibration ◽  
Harmonic Excitation ◽  
Mode Shapes ◽  
Noise Robustness ◽  
Steady State Response ◽  
Structural Damage Detection ◽  
State Response

While structural damage detection based on flexural vibration shapes, such as mode shapes and steady-state response shapes under harmonic excitation, has been well developed, little attention is paid to that based on longitudinal vibration shapes that also contain damage information. This study originally formulates a slope vibration shape for damage detection in bars using longitudinal vibration shapes. To enhance noise robustness of the method, a slope vibration shape is transformed to a multiscale slope vibration shape in a multiscale domain using wavelet transform, which has explicit physical implication, high damage sensitivity, and noise robustness. These advantages are demonstrated in numerical cases of damaged bars, and results show that multiscale slope vibration shapes can be used for identifying and locating damage in a noisy environment. A three-dimensional (3D) scanning laser vibrometer is used to measure the longitudinal steady-state response shape of an aluminum bar with damage due to reduced cross-sectional dimensions under harmonic excitation, and results show that the method can successfully identify and locate the damage. Slopes of longitudinal vibration shapes are shown to be suitable for damage detection in bars and have potential for applications in noisy environments.

Dynamic Response of a Geared Rotor-Bearing System Under Residual Shaft Bow Effect

2006 ◽  
Author(s):  
T. N. Shiau ◽  
E. K. Lee ◽  
Y. C. Chen ◽  
T. H. Young
Keyword(s):  
Steady State ◽  
Natural Frequencies ◽  
Coupling Effect ◽  
Equations Of Motion ◽  
Transmission Error ◽  
Mode Shapes ◽  
Steady State Response ◽  
State Response ◽  
Rotor Bearing ◽  
Bearing System

The paper presents the dynamic behaviors of a geared rotor-bearing system under the effects of the residual shaft bow, the gear eccentricity and excitation of gear’s transmission error. The coupling effect of lateral and torsional motions is considered in the dynamic analysis of the geared rotor-bearing system. The finite element method is used to model the system and Lagrangian approach is applied to derive the system equations of motion. The dynamic characteristics including system natural frequencies, mode shapes and steady-state response are investigated. The results show that the magnitude of the residual shaft bow, the phase angle between gear eccentricity and residual shaft bow will significantly affect system natural frequencies and steady-state response. When the spin speed closes to the second critical speed, the system steady state response will be dramatically increased by the residual shaft bow for the in-phase case. Moreover the zero response can be obtained when the system is set on special conditions.

scholarly journals Structural Damage Detection Using Slopes of Longitudinal Vibration Shapes

2016 ◽  
Vol 138 (3) ◽  
Author(s):  
W. Xu ◽  
W. D. Zhu ◽  
S. A. Smith ◽  
M. S. Cao
Keyword(s):  
Steady State ◽  
Damage Detection ◽  
Structural Damage ◽  
Longitudinal Vibration ◽  
Harmonic Excitation ◽  
Mode Shapes ◽  
Noise Robustness ◽  
Steady State Response ◽  
Structural Damage Detection ◽  
State Response

While structural damage detection based on flexural vibration shapes, such as mode shapes and steady-state response shapes under harmonic excitation, has been well developed, little attention is paid to that based on longitudinal vibration shapes that also contain damage information. This study originally formulates a slope vibration shape (SVS) for damage detection in bars using longitudinal vibration shapes. To enhance noise robustness of the method, an SVS is transformed to a multiscale slope vibration shape (MSVS) in a multiscale domain using wavelet transform, which has explicit physical implication, high damage sensitivity, and noise robustness. These advantages are demonstrated in numerical cases of damaged bars, and results show that MSVSs can be used for identifying and locating damage in a noisy environment. A three-dimensional (3D) scanning laser vibrometer (SLV) is used to measure the longitudinal steady-state response shape of an aluminum bar with damage due to reduced cross-sectional dimensions under harmonic excitation, and results show that the method can successfully identify and locate the damage. Slopes of longitudinal vibration shapes are shown to be suitable for damage detection in bars and have potential for applications in noisy environments.

Sign in / Sign up

Export Citation Format

Share Document