scholarly journals Solubility of Two Resin Composites in Different Mouthrinses

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Sezin Ozer ◽  
Emine Sen Tunc ◽  
Nuray Tuloglu ◽  
Sule Bayrak
Keyword(s):  
Composite Materials ◽  
Resin Composite ◽  
Artificial Saliva ◽  
Resin Composites ◽  
Constant Mass ◽  
Composite Restorations ◽  
Before And After ◽  
The Difference ◽  
Post Hoc

Aim. This study aimed to compare the solubility of a universal restorative resin composite (Filtek Z250; FZ250) and a silorane-based resin composite (Filtek Silorane; FS) after immersion in alcohol-containing mouthrinse, alcohol-free mouthrinse, and artificial saliva.Methods. 30 discs (10 mm × 1 mm) were prepared from each material and desiccated until a constant mass was obtained. Specimens were immersed in the test solutions for two days and desiccated again. Solubility was calculated based on the change in weight of each specimen before and after immersion. Data was analyzed using two-way ANOVA and Tukey’s Post Hoc testP<0.05.Results. Solubility values for both resin composites were the highest in the alcohol-containing mouthrinse. FZ250 showed greater solubility than FS; the difference was only significant in artificial saliva.Conclusion. Both resin-composite materials tested exhibited some degree of solubility in each of the test solutions. The use of an alcohol-free mouthrinse may be preferable for patients with extensive composite restorations.

scholarly journals Effect of Toothbrushing-mouthrinse-cycling on Surface Roughness and Topography of Nanofilled, Microfilled, and Microhybrid Resin Composites

2014 ◽  
Vol 39 (5) ◽  
pp. 521-529 ◽  
Author(s):  
EM da Silva ◽  
CUF de Sá Rodrigues ◽  
DA Dias ◽  
S da Silva ◽  
CM Amaral ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Resin Composite ◽  
Artificial Saliva ◽  
Filler Particle ◽  
Three Dimensional ◽  
Resin Composites ◽  
Topographic Analysis ◽  
Before And After ◽  
Multifactor Analysis ◽  
Post Hoc

SUMMARY The purpose of this study was to evaluate the influence of toothbrushing-mouthrinse-cycling (TMC) on the surface roughness and topography of three resin composites with different filler particle systems (Z350, nanofilled [Nf]; Durafill, microfilled [Mf], and Empress Direct, microhybrid [Mh]). Twenty specimens of each resin composite (8.0 mm diameter and 2 mm height) were randomly divided into four groups (n=5) according to the mouthrinses: alcohol-free (Plax – P) and alcohol-containing (Listerine – L and Plax Fresh Mint – PM) and artificial saliva (control – AS). The specimens were submitted to TMC for nine weeks. A surface roughness tester and a three-dimensional profilometer were used to measure the roughness (Ra) and the topography (Sa) before and after TMC. The data were analyzed by multifactor analysis of variance and Tukey post hoc test (α=0.05). In all media, Mh presented greater roughness than Mf (p&lt;0.05). The highest value of roughness was presented by Mh immersed in L (p&lt;0.05). The lowest values of roughness were presented by Mf (p&lt;0.05). The three resin composites presented the highest roughness after immersion in mouthrinses containing alcohol (PM and L) (p&lt;0.05). For the three resin composites, the increase in roughness was noticeable after the fifth week. Topographic analysis showed that the smoothest surfaces were present after immersion in AS.

scholarly journals Is Deterioration of Surface Properties of Resin Composites Affected by Filler Size?

2020 ◽  
Vol 2020 ◽  
pp. 1-6 ◽  
Author(s):  
H. Elbishari ◽  
N. Silikas ◽  
J. D. Satterthwaite
Keyword(s):  
Resin Composite ◽  
Tooth Brushing ◽  
Resin Composites ◽  
Strongly Correlated ◽  
Roughness Parameters ◽  
Filler Size ◽  
Before And After ◽  
Post Hoc ◽  
2D And 3D ◽  
Surface Gloss

Statement of the problem. Resin composite restorations can lose their aesthetic properties in clinical service. Purpose. To investigate the effect of filler size on surface gloss and roughness of resin composites using a glossmeter and 3D noncontact surface topography, respectively, before and after tooth-brushing abrasion. Materials and Methods. Seven model resin composites and one commercial were tested in the study. All materials were first polished, and then the surface gloss and 2D and 3D roughness parameters were recorded. Materials are then subjected to abrasion in a tooth-brushing simulator. Roughness parameters were recorded after 10,000 cycles, and after 20,000 cycles, both roughness and gloss were recorded. One-way ANOVA and Bonferroni post hoc test (p<0.05) were used to analyze data. Conclusion. Filler size is strongly correlated to gloss and surface roughness retention.

scholarly journals Cuspal movement related to different bonding techniques using etch-and-rinse and self-etch adhesive systems

2009 ◽  
Vol 03 (03) ◽  
pp. 213-218 ◽  
Author(s):  
Edson Alves Campos ◽  
Marcelo Ferrarezi Andrade ◽  
Sizenando Toledo Porto-Neto ◽  
Lucas Arrais Campos ◽  
José Roberto Cury Saad ◽  
...  
Keyword(s):  
Intermediate Layer ◽  
Class Ii ◽  
Adhesive Systems ◽  
Flowable Composite ◽  
Composite Restorations ◽  
Etch And Rinse ◽  
Before And After ◽  
The Difference ◽  
Post Hoc ◽  
Bonding Technique

ABSTRACTObjectives: To investigate the effects of adhesion technique using different contemporary adhesive systems on the cuspal movement in class II composite restorations in human premolar teeth.Methods: Human premolar teeth were prepared with class II cavities and then restored with composite and etch-and-rinse (Adper Scotchbond Multi Purpose and Adper Single Bond) or selfetch (Clearfil SE Bond and Clearfil S3 Bond) adhesive systems under different bonding techniques (total bonding and selective bonding). The influence of an intermediate layer of flowable composite was also evaluated. The cuspal distance was measured before and after the restorative procedure, and the difference was recorded as cuspal movement. The data were submitted to ANOVA test and Tukey’s post hoc comparison procedure test (alpha=0.05).Results: For all adhesive systems, the teeth restored with selective bonding technique showed lower values of cuspal movement and the use of an intermediary layer of flowable composite did not show any influence on the cuspal movement.Conclusions: Both the adhesive techniques tested were not able to prevent the cuspal movement. However, selectively bonded class II composite restorations demonstrated lower values of cuspal movement comparing with total bonding technique, and the use of an intermediate layer of flowable composite did not diminish the values of cuspal movement. (Eur J Dent 2009;3:213-218)

scholarly journals Degradation of Resin Composites in a Simulated Deep Cavity

2014 ◽  
Vol 25 (6) ◽  
pp. 532-537 ◽  
Author(s):  
Luana Gonçalves ◽  
Cristiane Mariote Amaral ◽  
Laiza Tatiana Poskus ◽  
José Guilherme Antunes Guimarães ◽  
Eduardo Moreira da Silva
Keyword(s):  
Lactic Acid ◽  
Resin Composite ◽  
Artificial Saliva ◽  
Linear Regression Analysis ◽  
Resin Composites ◽  
Cavity Depth ◽  
Deep Cavity ◽  
Ft Ir ◽  
Multifactor Analysis ◽  
Post Hoc

The aim of this study was to analyze the sorption and solubility of a nanofilled (Filtek Z350) and a midifilled (Filtek P60) resin composite in oral environment-like substances, in a simulated deep cavity. A cylindrical cavity prepared in a bovine incisor root was incrementally filled with resin composites. The obtained resin composite cylinders were cut perpendicularly to the axis to obtain 1-mm-thick discs that were divided into fifteen groups (n=5) according to depth (1, 2, 3, 4 and 5 mm) and immersion media (distilled water - DW, artificial saliva - AS and lactic acid - LA). The sorption and solubility were calculated based on ISO 4049:2000. Additionally, the degree of conversion (DC%) was calculated by FT-IR spectroscopy. Data were analyzed using multifactor analysis of variance (MANOVA) followed by Tukey's HSD post-hoc test and linear regression analysis (a=0.05). The DC% was higher for the midifilled resin composite and was negatively influenced by cavity depth (p<0.05). The nanofilled resin composite presented higher sorption and solubility than did the midifilled (p<0.05). The immersion media influenced the sorption and the solubility as follows: LA>AS>DW, (p<0.05). Both phenomena were influenced by cavity depth, with the sorption and solubility increasing from 1 to 5 mm (p<0.05). The degradation of resin composite restorations may be greater in the deepest regions of class II restorations when the composite is exposed to organic acids present in the oral biofilm (lactic acid).

scholarly journals The Effects of Toothbrush Wear on the Surface Roughness and Gloss of Resin Composites with Various Types of Matrices

2021 ◽  
Vol 9 (1) ◽  
pp. 8
Author(s):  
Murtadha AlAli ◽  
Nikolaos Silikas ◽  
Julian Satterthwaite
Keyword(s):  
Surface Roughness ◽  
Pairwise Comparisons ◽  
Resin Composites ◽  
Hybrid Resin ◽  
Before And After ◽  
Post Hoc ◽  
Main Effects ◽  
Toothbrush Wear

Objective: To evaluate and compare the surface roughness and gloss of a DMA-free composite and Bis-GMA-free composite with a DMA-based composite before and after toothbrushing simulation. Materials and Methods: Fifteen dimensionally standardised composite specimens of three nano-hybrid resin composites (Tetric EvoCeram, Admira Fusion, and Venus Diamond) were used. Five specimens from each composite were polished and then subjected to a toothbrushing simulator. Surface roughness (Ra) and gloss were measured before toothbrushing and after 5000, 10,000, 15,000, and 20,000 toothbrushing cycles. The data was analysed using 5 × 3 ANOVA to assess surface roughness and gloss values and pairwise comparisons in the form of Tukey post hoc tests were performed to interpret main effects. Results: For all tested materials, surface roughness increased, and gloss decreased after toothbrushing abrasion. Surface roughness (Ra) values ranged from 0.14 to 0.22 μm at baseline and increased to between 0.41 and 0.49 μm after 20,000 toothbrushing cycles. Gloss values ranged between 31.9 and 50.6 GU at baseline and between 5.1 and 19.5 GU after 20,000 toothbrushing cycles. The lowest initial Ra value was detected in Venus Diamond and the highest initial gloss value was detected in Tetric EvoCeram. Conclusions: Simulated toothbrushing abrasion led to an increase in surface roughness and a decrease in gloss for all tested materials. Venus Diamond had the smoothest surface and Tetric EvoCeram had the glossiest surface after polishing and following 20,000 cycles of toothbrushing abrasion. Admira Fusion demonstrated the roughest surface and had the lowest gloss values before and after toothbrushing abrasion.

scholarly journals How do the optical properties of the bulk fill posterior composites change after 2 years of simulated toothbrushing?

2019 ◽  
Vol 22 (3) ◽  
pp. 378-386
Author(s):  
Leticia Souza Lopes ◽  
Helio Rodrigues Sampaio Filho ◽  
Elisa Gomes Albuquerque ◽  
Chane Tardem ◽  
Mauro Sayão Miranda ◽  
...  
Keyword(s):  
Optical Properties ◽  
Resin Composite ◽  
High Viscosity ◽  
Composite Resins ◽  
Resin Composites ◽  
Regression Analyses ◽  
Significance Level ◽  
Composite Control ◽  
Multifactor Analysis ◽  
Post Hoc

The objective of this study was to evaluate the alteration of the optical properties of bulk Fill resin-based composites after 2 years of simulated toothbrushing. Three high-viscosity bulk fill resin composites and one conventional sculptable resin composite (control) were analyzed. Five specimens of each resin composite were prepared, and roughness, color, translucency and gloss were evaluated initially and after one and two years of simulated toothbrushing. The specimens were submitted to electric simulated toothbrushing (14600 strokes/100g) using a commercially available toothbrush with soft fibers and toothpaste slurry in a proportion of 1:2 by weight. The brushing scheme was of 40 cycles per day (2 cycles per second / 280 cycles in a week). The optical properties and the roughness data were analyzed by a multifactor analysis of variance (MANOVA) and a Tukey post hoc test. The baseline and final values of Ra and Sa were submitted to linear regression analyses, all of which were performed at a significance level of p=0.05. Gloss and roughness presented statistical differences between the resin-time interactions in all composite resins. The gloss (72.5%) and roughness (89.4%) worsened significantly after brushing, but the authors didn’t find statistically significant differences when evaluating translucency and color. Based in the results, it could be concluded that the simulated brushing degraded the brightness and roughness of the used high-viscosity bulk fill composites.

scholarly journals A 3-year randomized clinical trial evaluating two different bonded posterior restorations: Amalgam versus resin composite

2016 ◽  
Vol 10 (01) ◽  
pp. 016-022 ◽  
Author(s):  
Hande Kemaloglu ◽  
Tijen Pamir ◽  
Huseyin Tezel
Keyword(s):  
Clinical Trial ◽  
Randomized Clinical Trial ◽  
Public Health Service ◽  
Resin Composite ◽  
Resin Composites ◽  
Composite Restorations ◽  
Vas Scores ◽  
To Receive ◽  
Posterior Restorations ◽  
Postoperative Sensitivity

ABSTRACT Objective: To compare the performance and postoperative sensitivity of a posterior resin composite with that of bonded amalgam in 40 (n = 20) large sized cavities and to evaluate whether resin composite could be an alternative for bonded amalgam. Materials and Methods: This was a randomized clinical trial. Twenty patients in need of at least two posterior restorations were recruited. Authors randomly assigned one half of the restorations to receive bonded amalgam and the other half to composite restorations. Forty bonded amalgams (n = 20) and composites (n = 20) were evaluated for their performance on modified-US Public Health Service criteria and postoperative sensitivity using visual analogue scale (VAS) for 36-months. Results: Success rate of this study was 100%. First clinical alterations were rated as Bravo after 1 year in marginal discoloration, marginal adaptation, anatomical form, and surface roughness for both amalgam and composite. At the 3rd year, overall “Bravo” rated restorations were 12 for bonded amalgam and 13 for resin composites. There were no significant differences among the VAS scores of composites and bonded amalgams for all periods (P > 0.05) except for the comparisons at the 3rd year evaluation (P < 0.05). Conclusions: Within the limitation of this study, both resin composite and bonded amalgam were clinically acceptable. Postoperative sensitivity results tend to decrease more in composite restorations rather than amalgams. Therefore, it was concluded that posterior resin composite can be used even in large sized cavities.

scholarly journals Color Stability and Gloss of Esthetic Restorative Materials after Chemical Challenges

2019 ◽  
Vol 30 (1) ◽  
pp. 52-57 ◽  
Author(s):  
Eduardo Haruki Ozera ◽  
Fernanda Miori Pascon ◽  
Américo Bortolazzo Correr ◽  
Regina Maria Puppin-Rontani ◽  
Aline Rogéria de Castilho ◽  
...  
Keyword(s):  
Color Change ◽  
Artificial Saliva ◽  
Color Stability ◽  
Initial Surface ◽  
Resin Composites ◽  
Cranberry Juice ◽  
Color Changes ◽  
Restorative Materials ◽  
Post Hoc ◽  
Acidic Beverages

Abstract This study evaluated gloss and color changes of esthetic restorative materials subjected to different acidic beverages. Specimens of resin composites (Z350XT (Z350), IPS Empress Direct (ED), Charisma Diamond (CD)) were prepared and the initial surface gloss and color (ΔE) were measured (n=10). Then, the specimens were immersed in 4 mL of each of the different beverages (cranberry juice; Coca-Cola; coffee or artificial saliva) during 15 min, 3x/day for 14 days and new gloss and color readings were obtained. Color change was evaluated with the ΔE formula and gloss change values were obtained by the formula: (final gloss - initial gloss). Data was submitted to two-way ANOVA followed by Tukey’s post hoc test (a=0.05). CD showed the lowest color change among resin composites. The highest ΔE values were obtained after immersion in coffee and cranberry juice. Coffee promoted the highest gloss change (worst gloss retention), followed by cranberry juice, Coca-cola and artificial saliva (p<0.05). The type of beverage significantly influenced the gloss of resin composites. Coca-cola reduced gloss of the three resin composites in a similar manner. Coffee affected the ED gloss more than that of Z350 and CD, while cranberry juice affected Z350 more than ED and CD. Saliva had a more pronounced effect on the gloss retention of CD than ED. The beverages used in this study influenced the optical surface properties of the composites studied.

scholarly journals Microleakage at enamel and dentin margins with a bulk fills flowable resin

2014 ◽  
Vol 08 (01) ◽  
pp. 001-008 ◽  
Author(s):  
Nicola Scotti ◽  
Allegra Comba ◽  
Alberto Gambino ◽  
Davide Salvatore Paolino ◽  
Mario Alovisi ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Resin Composite ◽  
In Vitro Study ◽  
Artificial Ageing ◽  
Resin Composites ◽  
Class V ◽  
Dye Penetration ◽  
Before And After ◽  
Blue Solution

ABSTRACT Objective: The aim of this in vitro study was to evaluate the marginal sealing ability of a bulk fill flowable resin composite on both enamel and dentin substrates. Materials and Methods: 48 non-carious molars were selected and four Class-V cavities were prepared at the CEJ of each sample. Cavities were filled with Venus Diamond (Heraeus Kulzer); Venus Diamond Flow (Heraeus Kulzer) and Surefil SDR (Dentsply). Samples were divided into two groups: First group samples were immersed in a methylene blue solution for 30 min at 25°C. Second group samples were artificially aged and then treated with methylene blue. Samples were sectioned in the center of the restoration and observed with a 40x stereomicroscope, and the percentage of cavity infiltration was calculated. Results: Results were analyzed statistically by ANOVA (P < 0.05). The amount of infiltration was significantly lower for the enamel substrate compared with dentin (P = 0.0001) and in samples immediately immersed in methylene blue compared with those that were artificially aged (P = 0.011). The interaction between the composite material and the marginal substrate significantly affected dye penetration (P = 0.006). Conclusions: Bulk fill flowable resins provided significantly better marginal seal in dentin, both before and after artificial ageing. Nanohybrid resin composites and bulk fill flowable resins showed similar microleakage values at enamel margins. Bulk fills flowable resins provided significantly better marginal seal in dentin, both before and after artificial ageing. Nanohybrid resin composites and bulk fill flowable resins showed similar microleakage values at enamel margins.

scholarly journals The effect of a bleaching agent on the pigment removal and the bond strength of bulk-fill resin composites: an in vitro study

2018 ◽  
Vol 47 (5) ◽  
pp. 298-304
Author(s):  
Caroline de Farias CHARAMBA ◽  
Renally Bezerra Wanderley LIMA ◽  
Sônia Saeger MEIRELES ◽  
Rosângela Marques DUARTE ◽  
Ana Karina Maciel ANDRADE
Keyword(s):  
Bond Strength ◽  
Color Change ◽  
Resin Composite ◽  
Distilled Water ◽  
Filling Material ◽  
Resin Composites ◽  
Bleaching Agent ◽  
Microtensile Testing ◽  
Before And After

Abstract Introduction In order to simplify the technique, reduce the time required for direct adhesive restorations, bulk-fill resin composites have been developed be applied in bulk placement up to 4 mm increments. Objective Evaluating the color change (ΔE) and the microtensile bond strength (μTBS) of bulk fill resin composites (BFRC) to dentin after the immersion in regular beverages and the application of bleaching systems. Method Forty-five human molar teeth were randomly distributed in three groups according to the filling material (n=15): Filtek Bulk Fill, Tetric N Ceram Bulk Fill and Filtek Z100. The restored teeth were immersed in coffee, wine and distilled water (n=5) for 72 hours. The color parameters were measured using a spectrophotometer, having as basis the CIE L*a*b*, before and after tooth staining and application of bleaching processes. Subsequently, the teeth were sectioned to obtain the specimens for the microtensile testing. The ΔE values were analyzed applying the Kruskal-Wallis and the Wilcoxon tests, and the μTBS values were analyzed applying the ANOVA and the Bonferroni tests (p<0.05). Result There were no significant differences in the ∆E values when comparing the BFRCs to the conventional resin composite (CRC) in most of the experimental groups. The ∆E values did not present significant differences before and after the application of bleaching processes for all the tested resin composites. The BFRCs presented higher μTBS values than the CRC after exposure to distilled water, wine and bleaching agent. Conclusion The studied BFRCs presented similar color stability to the CRC. The BFRCs presented higher bond strength to the dentin than the CTC in most of the evaluated conditions. The bleaching agent was not effective in whitening the stained restored teeth.

Sign in / Sign up

Export Citation Format

Share Document