scholarly journals Wideband Circularly Polarized SIW Antenna Array That Uses Sequential Rotation Feeding

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Fang-Fang Fan ◽  
Ze-Hong Yan ◽  
Wei Wang
Keyword(s):  
Antenna Array ◽  
Delay Line ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Feeding Method ◽  
Circularly Polarized ◽  
X Band ◽  
Measured Impedance ◽  
Diamond Ring

A wideband right-handed circularly polarized (CP) substrate integrated waveguide- (SIW-) based diamond ring-slot antenna array at the X-band is presented in this study. The array consists of four elements that exhibit wideband impedance matching characteristics and good radiation performance. The array also employs a sequential rotation feeding method to achieve the wideband axial ratio (AR) bandwidth. The feeding network is based on the SIW power divider with a delay line related to sequential rotation feeding. To validate our design, an antenna array is fabricated and measured. The measured impedance and AR bandwidths are 19.2% (VSWR<2) and 14.1% (AR<3 dB), respectively. Moreover, the antenna has a stable CP peak gain of more than 12 dBic from 10.1 GHz to 10.7 GHz.

scholarly journals CPW-fed circularly-polarized antenna array with high front-to-back ratio and low-profile

Open Physics ◽  
2018 ◽  
Vol 16 (1) ◽  
pp. 651-655 ◽  
Author(s):  
Yilin Liu ◽  
Kama Huang
Keyword(s):  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Axial Ratio ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Feeding Method ◽  
Circularly Polarized ◽  
Low Profile ◽  
Novel Design

Abstract A novel design of a coplanar waveguide (CPW) feed antenna array with circular polarization (CP) and a high front-to-back ratio is described. The proposed CP array is achieved by using a compact CPW–slotline transition network etched in the ground plane. The measured results show that this kind of feeding method can improve the impedance bandwidth, as well as the axial ratio bandwidth of the CP antenna array and provide adequate gain. The proposed array can achieve a 6.08% impedance bandwidth and a 4.10% CP bandwidth. Details of the antenna design and experimental results are presented and discussed.

Dual circularly polarized multilayer MIMO antenna array with an enhanced SR-feeding network for C-band application

2017 ◽  
Vol 9 (8) ◽  
pp. 1741-1748 ◽  
Author(s):  
Mahdi Jalali ◽  
Mohammad Naser-Moghadasi ◽  
Ramezan Ali Sadeghzadeh
Keyword(s):  
Antenna Array ◽  
Tai Chi ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Antenna Element ◽  
Circularly Polarized ◽  
Mimo Antenna ◽  
Feed Network

Wide-band circularly polarized multi-input multi-output (MIMO) antenna array with a 2 × 4 feed network was proposed for C-band application. Different unique techniques were utilized in the proposed array to enhance the antenna characteristics, such as gain, 3 dB axial ratio bandwidth (ARBW), impedance tuning, and ruinous mutual coupling effects. A miniaturized dual-feed Tai chi-shaped antenna element with a pair of feeding points and a pair of eyebrow-shaped strips was presented for enhancing circular polarization (CP) purity and impedance matching. For a better improvement of CP features, a 2*4 MIMO sequentially rotated (MIMO-SR) feed network was used to achieve broader 3 dB ARBW. Besides, the MIMO feature of the feed network could control the left- and right-handed CP, respectively. Ultimately, specific forms of slot and slit structures were applied onto the top layer of MIMO feed network that provided a high isolation between the radiating elements and array network. Furthermore, the diversity gain (DG) was studied. The extracted measured results illustrated an impedance bandwidth of 3.5–8.2 GHz at port 1 and 3.5–8.3 GHz at port 2 for VWSR < 2 and 3 dB ARBW of 4.6–7.6 GHz at port 1 and 4.6–7.5 GHz at port 2. The peak gain of 9.9 dBi was at 6 GHz.

A Compact Broadband Circularly Polarized Slot Antenna for Universal UHF RFID Reader and GPS

2021 ◽  
Vol 36 (5) ◽  
pp. 589-595
Author(s):  
Canjie Chen ◽  
Quanyuan Feng
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Polarization Characteristics ◽  
Ground Plate

A novel compact printed broadband circularly polarized slot antenna is proposed in this paper. The antenna consists of an inverted L-shaped coplanar waveguide feed structure and a square ground plate loaded with three rectangular slots. The antenna achieves good impedance matching and circular polarization characteristics by adjusting the size of the L-shaped band and the rectangular slot. The simulation results show that the antenna has a 10-dB impedance bandwidth of 1360 MHz (690-2050 MHz) and a 3 dB axial ratio (AR) bandwidth of 490 MHz (770-1260 MHz). Additionally, the maximum gain reached 4.02 dBi. The antenna proposed in this paper can be applied to UHF RFID and GPS frequency bands.

Broadband CPW-Fed Circularly Polarized Square Slot Antenna for Universal UHF RFID Handheld Reader

2021 ◽  
Vol 36 (6) ◽  
pp. 747-754
Author(s):  
Rui Ma ◽  
Quanyuan Feng
Keyword(s):  
Low Cost ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Polarization Characteristic ◽  
Dielectric Substrate ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uhf Rfid ◽  
Circularly Polarized

This paper presents a new coplanar waveguide (CPW)-fed circularly polarized square slot antenna (CPSSA). The proposed antenna uses an inverted Z-shaped feedline protruded from the signal line of the feeding CPW. Circularly polarized (CP) radiation can be achieved by adequately inserting the arc-shaped grounded strip into the upper right corner of the square slot. The widened vertical tuning stub on the L-shaped grounded strip can improve impedance matching and axial ratio (AR) performance. The measured results indicate that the 10 dB impedance bandwidth is 620 MHz (652-1272 MHz), and the 3 dB axial ratio bandwidth is 320 MHz (840-1160 MHz), which has a broadband characteristic. In the range of the universal UHF RFID band, the measured peak gain is about 4.4 dBi. The proposed CPSSA uses low-cost FR4 material as the dielectric substrate. The overall size of the antenna is 119 × 119 × 0.5 mm3. The proposed antenna has a simple structure, easy processing, good performance, wide operating bandwidth, and dual circular polarization characteristic. It can be applied to the universal UHF RFID handheld reader environment.

scholarly journals A Ka-Band Circular Polarized Waveguide Slot Antenna with a Cross Iris

2020 ◽  
Vol 10 (19) ◽  
pp. 6994
Author(s):  
Sung-Joon Yoon ◽  
Jae-Hoon Choi
Keyword(s):  
Reflection Coefficient ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Experimental Results ◽  
Slot Antenna ◽  
Ka Band ◽  
Circularly Polarized ◽  
Waveguide Slot ◽  
Waveguide Slot Antenna

A Ka-band circularly polarized (CP) waveguide slot antenna with a cross iris is proposed. To achieve the CP characteristic (LHCP) in the antenna, a hexagonal shaped cavity is used. The impedance matching is improved by adjusting the sizes of the hexagonal cavity and a rectangular matching cavity. To enhance the axial ratio bandwidth, a cross iris is used with two arms of different lengths. From experimental results, the proposed antenna has a 3 dB axial ratio bandwidth of 6810 MHz (31.72 GHz–38.53 GHz). The −10 dB reflection coefficient bandwidth of the proposed antenna ranges from 31.51 GHz to 39.21 GHz (7700 MHz).

A broad band circularly polarized cross slot cavity back array antenna with sequentially rotated feed network for improving gain in X-band application

2016 ◽  
Vol 9 (3) ◽  
pp. 705-710 ◽  
Author(s):  
Majid- Fakheri ◽  
Mohammad Naser-Moghadasi ◽  
Ramezan Ali- Sadeghzadeh
Keyword(s):  
Antenna Array ◽  
Mutual Coupling ◽  
Broad Band ◽  
Optimization Procedure ◽  
Axial Ratio ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Feed Network ◽  
And Performance

This paper presents a new broad band circularly polarized slot antenna array based on substrate-integrated waveguide (SIW) and aperture feeding techniques. The antenna element's impedance and 3 dB axial-ratio (AR) bandwidths are from 8.8 to 10.4 GHz (16.67%) and 9.5–10.7 GHz (12%), respectively. Employing aperture-coupled feed and combining this method with sequentially rotated network, a 2 × 2 antenna array is achieved. Parametric optimization procedure is used to enhance the antenna specifications. In the presented scheme by reducing mutual coupling caused by the SIW technique and sequentially rotated feed network, all parameters of antenna are improved. Consequently a novel antenna array with impedance bandwidth of 2.8 GHz (8.7–11.5 GHz) and 3 dB AR bandwidth of 2.1 GHz (9–11.05 GHz) are obtained. The average gain of the proposed antenna is about 16.7 dBic. A new method is used to increase the gain of antenna array. The extracted result shows that side lob level, mutual coupling, impedance bandwidth, and performance of antenna simultaneously are controlled.

A low-profile wideband circularly polarized MIMO antenna with pattern and polarization diversity

2019 ◽  
Vol 12 (4) ◽  
pp. 316-322 ◽  
Author(s):  
Prashant Chaudhary ◽  
Ashwani Kumar ◽  
B. K. Kanaujia
Keyword(s):  
Impedance Matching ◽  
Axial Ratio ◽  
Polarization Diversity ◽  
Circularly Polarized ◽  
Mimo Antenna ◽  
Low Profile ◽  
X Band ◽  
Monopole Antennas ◽  
Multiple Input ◽  
Linearly Polarized

AbstractThe present work describes a unique planar low-profile wideband circularly polarized Multiple-Input and Multiple-Output (MIMO) antenna operating in the X-band, with pattern and polarization diversity over the entire axial-ratio bandwidth (ARBW). The design is unique in the sense that a simple grounded stub introduced between two linearly polarized monopole antennas has been used to realize wideband circular polarization, pattern diversity, and high isolation between antennas. The ARBW of the MIMO antenna is 2.45 GHz (8.11–10.56) 3 dB and its impedance matching bandwidth is 3.52 GHz (8.07–11.59). The isolation is better than 20 dB. The antenna can be easily adapted to operate other frequency bands by simple frequency scaling. It has been fabricated on an FR-4 substrate and its performance has been compared against several existing available antennas.

A Broadband Circularly Polarized Cross-slotted Patch Antenna with Horizontal Meandered Strip (HMS)

Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 191-199
Author(s):  
M. K. Verma ◽  
Binod K. Kanaujia ◽  
J. P. Saini ◽  
Padam S. Saini
Keyword(s):  
Circular Polarization ◽  
Patch Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Feeding Technique

AbstractA broadband circularly polarized slotted square patch antenna with horizontal meandered strip (HMS) is presented and studied. The HMS feeding technique provides the good impedance matching and broadside symmetrical radiation patterns. A set of cross asymmetrical slots are etched on the radiating patch to realize the circular polarization. An electrically small stub is added on the edge of the antenna for further improvement in performance. Measured 10-dB impedance bandwidth (IBW) and 3-dB axial ratio bandwidth (ARBW) of the proposed antenna are 32.31 % (3.14–4.35 GHz) and 20.91 % (3.34–4.12 GHz), respectively. The gain of the antenna is varied from 3.5 to 4.86dBi within 3-dB ARBW. Measured results matched well with the simulated results.

A novel design of circularly polarized ring CDRA with wideband impedance bandwidth using slotted microstrip feed line for X-band applications

2021 ◽  
pp. 1-10
Author(s):  
Chandravilash Rai ◽  
Sanjai Singh ◽  
Ashutosh Kumar Singh ◽  
Ramesh Kumar Verma
Keyword(s):  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Dielectric Resonator Antenna ◽  
Circularly Polarized ◽  
Feed Line ◽  
X Band ◽  
Novel Design ◽  
Two Hybrid ◽  
Microstrip Feed Line ◽  
Microstrip Feed

Abstract A circularly polarized ring cylindrical dielectric resonator antenna (ring-CDRA) of wideband impedance bandwidth is presented in this article. The proposed ring CDRA consist of an inverted rectangular (tilted rectangular) shaped aperture and inverted L-shaped slotted microstrip feed line. The tilted rectangular shaped aperture and inverted L-shaped microstrip feed line generate two-hybrid mode HEM11δ and HEM12δ while ring CDRA and slotted microstrip feed line are used for the enhancement of impedance bandwidth. The proposed ring CDRA is resonating between 6.08 and 12.2 GHz with 66.95% (6120 MHz) impedance bandwidth. The axial ratio (AR) bandwidth of 6.99% (780 MHz) is obtained between 10.76 and 11.54 GHz with a minimum AR value of 0.2 dB at a frequency of 11 GHz. The proposed geometry of ring CDRA has been validated with measurement performed by VNA and anechoic chamber. The operating range of the proposed radiator is useful for different applications in X-band.

Sign in / Sign up

Export Citation Format

Share Document