scholarly journals Formulation and Evaluation of Guggul Lipid Nanovesicles for Transdermal Delivery of Aceclofenac

2014 ◽  
Vol 2014 ◽  
pp. 1-10 ◽  
Author(s):  
Praveen Kumar Gaur ◽  
Shikha Mishra ◽  
Vidhu Aeri

Context. Most new drugs have low water solubility and liposome is an important formulation to administer such drugs; however, it is quite unstable and has negligible systemic absorption.Objective. Aceclofenac nanovesicles were made using guggul lipid for formulating stable transdermal formulation.Materials and Methods. Guggul lipid was formulated into vesicles along with cholesterol and dicetyl phosphate using film hydration method. The formulations were analyzed for physicochemical properties and stability. Then its skin permeation and anti-inflammatory activity were determined.Results. Both categories of vesicles (PC and GL) showed optimum physicochemical properties; however, accelerated stability study showed considerable differences. GL-1 was appreciably stable for over 6 months at 4°C. Corresponding gels (PCG-1 and GLG-1) showedCmaxvalues at 4.98 and 7.32 μg/mL along with theTmaxvalues at 4 and 8 hours, respectively. GLG-1 inhibited edema production by 90.81% in 6 hours.Discussion. PC liposomes are unstable at higher temperature and upon longer storage. The formulation with higher lipid content (GL-1) showed good drug retention after 24 hours and appreciable stability both at higher temperature and for longer duration. Guggul lipid being a planar molecule might be stacked in vesicle wall with cholesterol.Conclusion. The composition of the nanovesicle played an important role in stability and drug permeation. Guggul lipid is suitable for producing stable vesicles.

2018 ◽  
Vol 18 (9) ◽  
pp. 797-807 ◽  
Author(s):  
Paula dos Passos Menezes ◽  
Francielly de Oliveira Araujo ◽  
Tatianny Araujo Andrade ◽  
Igor Araujo Santos Trindade ◽  
Heitor Gomes de Araujo-Filho ◽  
...  

Background: Some research studies have shown that Lippia pedunculosa essential oil (EOLP) has interesting biological activities. However, its low water solubility is the main challenge to achieve its therapeutic potential. In this context, Cyclodextrins (CDs) have been widely used in order to overcome this problem due to your capability to improve the physicochemical properties of drugs. Objective: In this perspective, the main goal of this study was to investigate how the improvement of the physicochemical properties of inclusion complexes (EOLP and β-CD) enhance the antinociceptive effect in mice. Methods: To achieve that, we prepared samples by Physical Mixture (PM), Paste Complexation (PC) and Slurry Complexation (SC) methods, followed by their physicochemical characterization. In addition, it was evaluated if the use of β-CD enhances the antinociceptive effect of EOLP in mice. Results: The analysis showed that rotundifolone (72.02%) was the major compound of EOLP and we found out based on DSC results that β-CD protected it from oxidation. In addition, TG techniques demonstrated that the best inclusion methods were PC and SC, due to their greater weight loss (10.8 and 11.6%, respectively) in the second stage (171-312°C), indicating that more complexed oil was released at the higher temperature than oil free. Other characteristics, such as changes in the typical crystalline form, and reduced particle size were observed by SEM and laser diffraction, respectively. The SC was the most effective complexation method, once the presence of rotundifolone was detected by FTIR. Based on that, SC method was used in all mice tests. In this regard, the number of paw licks was reduced for both compounds (all doses), but EOLP was more effective in reducing the nociceptive behavior. Conclusion: Therefore, CDs seem not to be a good tool to enhance the pharmacological properties of EOs rich in peroxide compounds such as rotundifolone.


Author(s):  
IYAN SOPYAN ◽  
ALVIN B. ◽  
INSAN SUNAN K. S. ◽  
CIKRA IKHDA N. H. S.

Water solubility and low bioavailability of active pharmaceutical ingredients are some of the main challenges in the process of developing new drugs, especially drugs in oral solid dosage forms. One way to improve drug solubility is the principle of cocrystallization. Cocristallyzation itself is the process of combining the active ingredients of a less water-soluble drug with a coformer so that it becomes more soluble. Pharmaceutical cocrystal provides benefits to improve physicochemical properties without affecting its pharmacological properties. In this review, we have reviewed literature discussions and research that discuss co-crystallization as an aid to improve the physicochemical and bioavailability of drugs and also discuss some drugs in the form of cocrystal and their improvement in physicochemical-biopharmaceutical properties. The main references data used in this review are research journals published in the past 10 y (2010-2020) using keywords: cocrystal, physicochemistry, bioavailability, and solid dosage form, and using google scholar as a database. Discussion on the effect of cocrystal on physicochemical properties and bioavailability of drugs was produced. The method of producing cocrystal and its characterization was also discussed. Cocrystal offers a promising approach to improve the physicochemical properties of API. The benefits of cocrystal can be observed through increased solubility, dissolution rate, permeability, bioavailability, drug stability, and tabletability.


2018 ◽  
Vol 192 ◽  
pp. 01008
Author(s):  
Worranan Rangsimawong ◽  
Paisit Wattanasri ◽  
Prasert Akkaramongkolporn ◽  
Prasopchai Tonglairoum ◽  
Tanasait Ngawhirunpat ◽  
...  

Kaempferia parviflora (KP) extract has been used in the Thai medicinal plant recipe, which the methoxyflavones are the main active compound. These compounds have low water solubility, high lipophilicity, and low bioavailability. The aim of this study was to develop the pluronic lecithin organogel (PLO) and PLO with d-limonene (PLO-L) for enhancing transdermal delivery of KP extract. These formulations were prepared and their physicochemical properties, stability, and in vitro skin permeation were evaluated. For the result, all formulations exhibited good physicochemical properties and stable under storage condition for 3 months. The permeation of KP extract-loaded PLO-L and PLO formulation showed significantly higher total methoxyflavones permeated through the skin than KP extract in water, which PLO-L provided the highest permeated flux of total methoxyflavones. This result suggested that d-limonene play a role as skin permeation enhancer. Organogel consisting of poloxamer 407 and lecithin also increased the skin permeation of KP extract. In conclusion, PLO-L could be a potential transdermal delivery system for KP extract.


Author(s):  
Neeraj Singh ◽  
Shweta Rai ◽  
Sankha Bhattacharya

Background: About two-third of new drugs reveal low solubility in water due to that; it becomes difficult for formulation scientists to develop oral solid dosage forms with a pharmaceutically acceptable range of therapeutic activity. In such cases, S-SMEEDS are the best carrier used universally for the delivery of hydrophobic drugs. SEDDS were also used, but due to its limitations, S-SMEDDS used widely. These are the isotropic mixtures of oils, co-solvents, and surfactants. S-SMEDDS are physically stable, easy to manufacture, easy to fill in gelatin capsules as well as improves the drug bioavailability by releasing the drug in the emulsion form to the gastrointestinal tract and make smooth absorption of the drug through the intestinal lymphatic pathway. Methods: We took on the various literature search related to our review, including the peer-reviewed research, and provided a conceptual framework to that. Standard tools are used for making the figures of the paper, and various search engines are used for the literature exploration.In this review article the author discussed the importance of S-SMEDDS, selection criteria for excipients, pseudo-ternary diagram, mechanism of action of S-SMEDDS, solidification techniques used for S-SMEDDS, Characterization of SEDDS and S-SMEDDS including Stability Evaluation of both and future prospect concluded through recent findings on S-SMEDDS on Cancer as well as a neoteric patent on S-SMEDDS Results: Many research papers discussed in this review article, from which it was found that the ternary phase diagram is the most crucial part of developing the SMEDDS. From the various research findings, it was found that the excipient selection is the essential step which decides the strong therapeutic effect of the formulation. The significant outcome related to solid-SMEDDS is less the globule size, higher would be the bioavailability. The adsorption of a solid carrier method is the most widely used method for the preparation of solid-SMEDDS. After review of many patents, it is observed that the solid-SMEDDS have a strong potential for targeting and treatment of a different type of Cancer due to their property to enhance permeation and increased bioavailability. Conclusion: S-SMEEDS are more acceptable pharmaceutically as compare to SEDDS due to various advantages over SEDDS viz stability issue is prevalent with SEDDS. A number of researchers had formulated S-SMEDDS of poorly soluble drugs and founded S-SMEDDS as prospective for the delivery of hydrophobic drugs for the treatment of Cancer. S-SMEEDS are grabbing attention, and the patentability on S-SMEDDS is unavoidable, these prove that S-SMEEDS are widely accepted carriers. These are used universally for the delivery of the hydrophilic drugs and anticancer drugs as it releases the drug to the gastrointestinal tract and enhances the systemic absorption. Abstract: Majority of active pharmaceutical ingredients (API) shows poor aqueous solubility, due to that drug delivery of the API to the systemic circulation becomes difficult as it has low bioavailability. The bioavailability of the hydrophobic drugs can be improved by the Self-emulsifying drug delivery system (SEDDS) but due to its various limitations, solid self-micro emulsifying drug delivery systems (S-SMEDDS) are used due to its advantages over SEDDS. S-SMEDDS plays a vital role in improving the low bioavailability of poorly aqueous soluble drugs. Hydrophobic drugs can be easily loaded in these systems and release the drug to the gastrointestinal tract in the form of fine emulsion results to In-situ solubilisation of the drug. In this review article the author's gives an overview of the solid SMEDSS along with the solidification techniques and an update on recent research and patents filled for Solid SMEDDS.


Pharmaceutics ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1372
Author(s):  
Chun-Yin Yang ◽  
Pao-Hsien Huang ◽  
Chih-Hua Tseng ◽  
Feng-Lin Yen

Antioxidants from plant extracts are often used as additives in skincare products to prevent skin problems induced by environmental pollutants. Artocarpus communis methanol extract (ACM) has many biological effects, such as antioxidant, anti-inflammatory, wound healing, and photoprotective effects; however, the poor water solubility of raw ACM has limited its applications in medicine and cosmetics. Topical antioxidant nanoparticles are one of the drug-delivery systems for overcoming the poor water solubility of antioxidants for increasing their skin penetration. The present study demonstrated that ACM-loaded hydroxypropyl-β-cyclodextrin and polyvinylpyrrolidone K30 nanoparticles (AHP) were successfully prepared and could effectively increase the skin penetration of ACM through changing the physicochemical characteristics of raw ACM, including reducing the particle size, increasing the surface area, and inducing amorphous transformation. Our results also revealed that AHP had significantly better antioxidant activity than raw ACM for preventing photocytotoxicity because the AHP formulation increased the cellular uptake of the ACM in UVB-irradiated HaCaT keratinocytes. In conclusion, our results suggest that AHP may be used as a good topical antioxidant nanoparticle for delivering ACM into deep layers of the skin for preventing UVB-induced skin problems.


2020 ◽  
pp. 141-148
Author(s):  
Rosalinda C Torres ◽  
Rowelain Mae G Yumang ◽  
Chelsea Kate F Jose ◽  
Danielle Camille P Canillo

Dragon fruit (Hylocereus polyrhizus) is known for its purple-coloured peels and pulp, which can be attributed to the presence of betalains. In this study, the potential of red dragon fruit as a source of natural colorant was investigated. Betacyanins were extracted from red dragon fruit peels and flesh in 1:3 ratio with water. Microencapsulation by spray-drying was done by adding 5% and 10% (w/v) maltodextrin (DE 11.8) to peels and flesh extracts, respectively. The spray-dried colorant powders all obtained <10% moisture content, 5.261-6.409 g/100g hygroscopic moisture content, and 5.317-7.349(mg/100L) betacyanin content. Morphological characterization revealed spherical, agglomerated particles with visible cracks on the surface. The stability study conducted showed that pigment retention was lowest at 70°C and highest at 4°C. Keywords: Hylocereus polyrhizus; Red dragon fruit; Betacyanin; Microencapsulation; Physicochemical properties


2021 ◽  
Vol 12 (1S) ◽  
pp. 62-73
Author(s):  
Nor Anis Shafira Rosidi ◽  
Asmaliza Abdul Ghani @ Yaacob ◽  
Nurhayati Yusof ◽  
Norzaida Yusof

Large production of red dragon fruit by-products, which are frequently discarded from food industry has become a major waste problem. Converting this waste into useful products with good physicochemical properties could solve the pollution issues. Thus, a study was carried out to investigate the effect of blanching and drying temperatures on physicochemical properties of red dragon fruit peel powder. Dragon fruit peel was pre-treated with hot water at 90 °C for 2 minutes before being dried in hot air oven dryer at 50 °C, 60 °C and 70 °C. Results showed that the powdered sample of blanched and dried at 50 °C had significantly higher fiber, water activity and moisture content than those of unblanched/blanched and dried at 60 °C and 70 °C. Result also showed that the colour of this powder was similar to the fresh dragon fruit peel. When dried at 50 °C, the unblanched and blanched powders exhibited a slightly higher water solubility index compared to those dried at 60 °C and 70 °C. Based on the evaluation of bulk and tapped densities, all powders having the Carr Index in the range of values between 20 and 28 thus can be categorised as slightly poor flowing. For all conditions studied, powder that was blanched and dried at 50 °C was the best condition as it contained the highest amount of fiber with good physicochemical properties.


2021 ◽  
Author(s):  
Ishita Chakraborty ◽  
Indira Govindaraju ◽  
Sintu Rongpipi ◽  
Krishna Kishore Mahato ◽  
Nirmal Mazumder

AbstractStarchy food items such as rice and potato with high carbohydrate content raise blood sugar. Hence, consuming low glycaemic foods is one tool to keep diabetes under control. In this study, potato and brown rice (Njavara rice) starches were subjected to hydrothermal treatments: heat moisture treatment (HMT) and annealing (ANN) to develop starch-based food products fit for consumption by diabetic patients. The effects of hydrothermal treatments on physicochemical properties and in-vitro enzymatic digestion of starch were determined. It was observed that hydrothermal treatments decreased the swelling power (SP)% and increased the water solubility (WS)% of the native starches. Native potato starch (PSN) showed a high SP of 80.33%, while annealed potato starch (PANN) and heat moisture treated potato starch (PHMT) showed SP reduced to 65.33% and 51.66%, respectively. Similarly, the SP % reduced from 64.33% in native brown rice (BRN) to 44.66% in annealed brown rice (BRANN) and 38.33% in heat moisture treated brown rice (BRHMT). WS % increased from 32.86% in PSN to 36.66% in PANN and 40.66% in PHMT. In BRN, the WS % increased from 14.0% to 14.66% in BRANN and 18.33% in BRHMT. Amylose content increased from 13.23% and 14.56% in PSN and BRN to 16.14% in PANN 17.99% in PHMT, 17.33% in BRANN, and 18.98% in BRHMT. The PSN crystallinity index reduced from 33.49 to 30.50% in PANN and 32.60% in PHMT. At 12 h of enzymatic digestion, it was found that the degree of hydrolysis (DoH) of PHMT (31.66%) and PANN (36.82%) reduced when compared to PSN (41.09%). Similarly, BRHMT exhibited the lowest DoH at 12 h compared to BRANN (29.24%) and BRN (35.48%). This study highlights the importance of hydrothermal treatments on starch in developing low glycaemic index commercial starch-based food products.


Sign in / Sign up

Export Citation Format

Share Document