scholarly journals Current Trends in Bioethanol Production by Saccharomyces cerevisiae: Substrate, Inhibitor Reduction, Growth Variables, Coculture, and Immobilization

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Asmamaw Tesfaw ◽  
Fassil Assefa
Keyword(s):  
Ethanol Production ◽  
Cell Mass ◽  
Nitrogen Sources ◽  
Extraction Methods ◽  
Production Costs ◽  
Yeast Cells ◽  
Bulk Liquid ◽  
Fermentation Time ◽  
Wide Range ◽  
Substrate Inhibitor

Bioethanol is one of the most commonly used biofuels in transportation sector to reduce greenhouse gases. S. cerevisiae is the most employed yeast for ethanol production at industrial level though ethanol is produced by an array of other yeasts, bacteria, and fungi. This paper reviews the current and nonmolecular trends in ethanol production using S. cerevisiae. Ethanol has been produced from wide range of substrates such as molasses, starch based substrate, sweet sorghum cane extract, lignocellulose, and other wastes. The inhibitors in lignocellulosic hydrolysates can be reduced by repeated sequential fermentation, treatment with reducing agents and activated charcoal, overliming, anion exchanger, evaporation, enzymatic treatment with peroxidase and laccase, in situ detoxification by fermenting microbes, and different extraction methods. Coculturing S. cerevisiae with other yeasts or microbes is targeted to optimize ethanol production, shorten fermentation time, and reduce process cost. Immobilization of yeast cells has been considered as potential alternative for enhancing ethanol productivity, because immobilizing yeasts reduce risk of contamination, make the separation of cell mass from the bulk liquid easy, retain stability of cell activities, minimize production costs, enable biocatalyst recycling, reduce fermentation time, and protect the cells from inhibitors. The effects of growth variables of the yeast and supplementation of external nitrogen sources on ethanol optimization are also reviewed.

scholarly journals Sustaible Ethanol Production From Sugarcane Molasses by Saccharomyce scerevisiae Immobilized on Chitosan-Coated Manganese Ferrite

2021 ◽  
Vol 5 ◽  
Author(s):  
Arianna Núñez Caraballo ◽  
Anna Iliná ◽  
Rodolfo Ramos González ◽  
Cristóbal N. Aguilar ◽  
Georgina Michelena Álvarez ◽  
...  
Keyword(s):  
Ethanol Production ◽  
Yeast Cells ◽  
Manganese Ferrite ◽  
X Ray Diffraction ◽  
Sugar Consumption ◽  
Total Consumption ◽  
Fermentation Time ◽  
Open Questions ◽  
One Step ◽  
The One

The interaction between nanostructures and yeast cells, as well as the description of the effect of nanoparticles in ethanol production are open questions in the development of this nanobiotechnological process. The objective of the present study was to evaluate the ethanol production by Saccharomyces cerevisiae in the free and immobilized state on chitosan-coated manganese ferrite, using cane molasses as a carbon source. To obtain the chitosan-coated manganese ferrite, the one-step coprecipitation method was used. The nanoparticles were characterized by X-ray diffraction obtaining the typical diffraction pattern. The crystal size was calculated by the Scherrer equation as 15.2 nm. The kinetics of sugar consumption and ethanol production were evaluated by HPLC. With the immobilized system, it was possible to obtain an ethanol concentration of 56.15 g/L, as well as the total sugar consumption at 24 h of fermentation. Productivity and yield in this case were 2.3 ± 0.2 g/(L * h) and 0.28 ± 0.03, respectively. However, at the same time in the fermentation with free yeast, 39.1 g/L were obtained. The total consumption of fermentable sugar was observed only after 42 h, reaching an ethanol titer of 50.7 ± 3.1, productivity and yield of 1.4 ± 0.3 g/(L * h) and 0.25 ± 0.4, respectively. Therefore, a reduction in fermentation time, higher ethanol titer and productivity were demonstrated in the presence of nanoparticles. The application of manganese ferrite nanoparticles shows a beneficial effect on ethanol production. Research focused on the task of defining the mechanism of their action and evaluation of the reuse of biomass immobilized on manganese ferrite in the ethanol production process should be carried out in the future.

Versatile Health Benefits of Catechin from Green Tea (Camellia sinensis)

2019 ◽  
Vol 15 (1) ◽  
pp. 3-10 ◽  
Author(s):  
Satheesh Babu Natarajan ◽  
Suriyakala Perumal Chandran ◽  
Sahar Husain Khan ◽  
Packiyaraj Natarajan ◽  
Karthiyaraj Rengarajan
Keyword(s):  
Green Tea ◽  
Camellia Sinensis ◽  
Health Benefits ◽  
Epigallocatechin Gallate ◽  
Extraction Methods ◽  
Major Constituent ◽  
Epicatechin Gallate ◽  
Wide Range ◽  
Green Tea Catechin ◽  
Anti Inflammatory

Background: Tea (Camellia sinensis, Theaceae) is the second most consumed beverage in the world. Green tea is the least processed and thus contain rich antioxidant level, and believed to have most of the health benefits. </p><p> Methods: We commenced to search bibliographic collection of peer reviewed research articles and review articles to meet the objective of this study. </p><p> Results: From this study, we found that the tea beverage contains catechins are believed to have a wide range of health benefits which includes neuroprotective, anti-inflammatory, antiulcer, antiviral, antibacterial, and anti-parasitic effects. The four major catechin compounds of green tea are epigallocatechin (EGC), epicatechin (EC), epigallocatechin gallate (EGCG), and epicatechin gallate (ECG), of which EGCG is the major constituent and representing 50-80% of the total catechin content. And also contain xanthine derivatives such as caffeine, theophylline, and theobromine, and the glutamide derivative theanine. It also contains many nutritional components, such as vitamin E, vitamin C, fluoride, and potassium. We sum up the various green tea phytoconstituents, extraction methods, and its medicinal applications. </p><p> Conclusion: In this review article, we have summarized the pharmacological importance of green tea catechin which includes antioxidant potential, anti-inflammatory, antimicrobial, anticancer, antidiabetic and cosmetic application.

scholarly journals Gene Expression Space Shapes the Bioprocess Trade-Offs among Titer, Yield and Productivity

2021 ◽  
Vol 11 (13) ◽  
pp. 5859
Author(s):  
Fernando N. Santos-Navarro ◽  
Yadira Boada ◽  
Alejandro Vignoni ◽  
Jesús Picó
Keyword(s):  
Gene Expression ◽  
Gene Transcription ◽  
Performance Metrics ◽  
Cell Mass ◽  
Gene Copy ◽  
Substrate Uptake ◽  
Promoter Strength ◽  
Expression Levels ◽  
Trade Offs ◽  
Wide Range

Optimal gene expression is central for the development of both bacterial expression systems for heterologous protein production, and microbial cell factories for industrial metabolite production. Our goal is to fulfill industry-level overproduction demands optimally, as measured by the following key performance metrics: titer, productivity rate, and yield (TRY). Here we use a multiscale model incorporating the dynamics of (i) the cell population in the bioreactor, (ii) the substrate uptake and (iii) the interaction between the cell host and expression of the protein of interest. Our model predicts cell growth rate and cell mass distribution between enzymes of interest and host enzymes as a function of substrate uptake and the following main lab-accessible gene expression-related characteristics: promoter strength, gene copy number and ribosome binding site strength. We evaluated the differential roles of gene transcription and translation in shaping TRY trade-offs for a wide range of expression levels and the sensitivity of the TRY space to variations in substrate availability. Our results show that, at low expression levels, gene transcription mainly defined TRY, and gene translation had a limited effect; whereas, at high expression levels, TRY depended on the product of both, in agreement with experiments in the literature.

Research on Ethanol Production by Biological Fermentation of Potato Pulp

2013 ◽  
Vol 805-806 ◽  
pp. 281-285
Author(s):  
Zhong Xu
Keyword(s):  
Chemical Composition ◽  
Ethanol Production ◽  
Production Rate ◽  
Liquid Ratio ◽  
Fermentation Time ◽  
Potato Pulp ◽  
Fermentation Temperature ◽  
Ethanol Production Rate ◽  
Solid Liquid

Bioconversion of potato pulp to fuel ethanol, analysing the potato pulp chemical composition and determining the potato pulp in the role of microorganism produce ethanol under the best conditions is the major research. An analysis of the chemical composition of potato pulp showed that : the basic ingredients are Protein (9.72%), Starch (25.52%), Cellulose (17.90%). The effects of ethanol production rate of solid-liquid ratio, fermentation temperature, inoculumconcertration, fermentation time. The results showed that: the best conditions producting ethanol from potato pulp obtained by single factor experiments are: solid-liquid ratio: 1:15, fermentation temperature: 35°C, inoculumconcertration: 3mL, fermentation time: 20h. Under this occasion, the ethanol production rate was 0.183mL·g-1.

Cellulosic ethanol production by combination of cellulase-displaying yeast cells

2012 ◽  
Vol 51 (6-7) ◽  
pp. 366-372 ◽  
Author(s):  
Seung-Ho Baek ◽  
Sujin Kim ◽  
Kyusung Lee ◽  
Jung-Kul Lee ◽  
Ji-Sook Hahn
Keyword(s):  
Ethanol Production ◽  
Cellulosic Ethanol ◽  
Yeast Cells

scholarly journals Synthesis of the Microbial Polysaccharide Gellan from Dairy and Plant-Based Processing Coproducts

2021 ◽  
Vol 2 (2) ◽  
pp. 234-244
Author(s):  
Thomas P. West
Keyword(s):  
Corn Steep Liquor ◽  
Nitrogen Sources ◽  
Soluble Starch ◽  
Culture Conditions ◽  
Water Soluble ◽  
Production Costs ◽  
Microbial Polysaccharide ◽  
Steep Liquor ◽  
The Cost ◽  
Condensed Distillers Solubles

This review examines the production of the microbial polysaccharide gellan, synthesized by Sphingomonas elodea, on dairy and plant-based processing coproducts. Gellan is a water-soluble gum that structurally exists as a tetrasaccharide comprised of 20% glucuronic acid, 60% glucose and 20% rhamnose, for which various food, non-food and biomedical applications have been reported. A number of carbon and nitrogen sources have been tested to determine whether they can support bacterial gellan production, with several studies attempting to optimize gellan production by varying the culture conditions. The genetics of the biosynthesis of gellan has been explored in a number of investigations and specific genes have been identified that encode the enzymes responsible for the synthesis of this polysaccharide. Genetic mutants exhibiting overproduction of gellan have also been identified and characterized. Several dairy and plant-based processing coproducts have been screened to learn whether they can support the production of gellan in an attempt to lower the cost of synthesizing the microbial polysaccharide. Of the processing coproducts explored, soluble starch as a carbon source supported the highest gellan production by S. elodea grown at 30 °C. The corn processing coproducts corn steep liquor or condensed distillers solubles appear to be effective nitrogen sources for gellan production. It was concluded that further research on producing gellan using a combination of processing coproducts could be an effective solution in lowering its overall production costs.

P–530 The use of wide thresholds for detecting intermediate chromosomal CNV up to 80% doesn’t improve PGT-A ability to discriminate true mosaic from uniformly aneuploid embryos

2021 ◽  
Vol 36 (Supplement_1) ◽  
Author(s):  
L Girardi ◽  
M Serdaroğulları ◽  
C Patassini ◽  
S Caroselli ◽  
M Costa ◽  
...  
Keyword(s):  
Inner Cell Mass ◽  
False Negative ◽  
Cell Mass ◽  
Categorical Variables ◽  
P Value ◽  
Sequencing Data ◽  
Preimplantation Genetic Testing ◽  
Exact Test ◽  
Institutional Review ◽  
Wide Range

Abstract Study question What is the effect of varying diagnostic thresholds on the accuracy of Next Generation Sequencing (NGS)-based preimplantation genetic testing for aneuploidies (PGT-A)? Summary answer When single trophectoderm biopsies are tested, the employment of 80% upper threshold increases mosaic calls and false negative aneuploidy results compared to more stringent thresholds. What is known already Trophectoderm (TE) biopsy coupled with NGS-based PGT-A technologies are able to accurately predict Inner Cell Mass’ (ICM) constitution when uniform whole chromosome aneuploidies are considered. However, minor technical and biological inconsistencies in NGS procedures and biopsy specimens can result in subtle variability in analytical results. In this context, the stringency of thresholds employed for diagnostic calls can lead to incorrect classification of uniformly aneuploid embryos into the mosaic category, ultimately affecting PGT-A accuracy. In this study, we evaluated the diagnostic predictivity of different aneuploidy classification criteria by employing blinded analysis of chromosome copy number values (CNV) in multifocal blastocyst biopsies. Study design, size, duration The accuracy of different aneuploidy diagnostic cut-offs was assessed comparing chromosomal CNV in intra-blastocysts multifocal biopsies. Enrolled embryos were donated for research between June and September 2020. The Institutional Review Board at the Near East University approved the study (project: YDU/20l9/70–849). Embryos diagnosed with uniform chromosomal alterations (single or multiple) in their clinical TE biopsy (n = 27) were disaggregated into 5 portions: the ICM and 4 TE biopsies. Overall, 135 specimens were collected and analysed. Participants/materials, setting, methods Twenty-seven donated blastocysts were warmed and disaggregated in TE biopsies and ICM (n = 135 biopsies). PGT-A analysis was performed using Ion ReproSeq PGS kit and Ion S5 sequencer (ThermoFisher). Sequencing data were blindly analysed with Ion-Reporter software. Intra-blastocyst comparison of raw NGS data was performed employing different thresholds commonly used for aneuploidy classification. CNV for each chromosome were reported as aneuploid according to 70% or 80% thresholds. Categorical variables were compared using Fisher’s exact test. Main results and the role of chance In this study, a total of 50 aneuploid patterns in 27 disaggregated embryos were explored. Single TE biopsy results were considered as true positive when they displayed the same alteration detected in the ICM at levels above the 70% or 80% thresholds. Alternatively, alterations detected in the euploid or mosaic range were considered as false negative aneuploidy results. When the 70% threshold was applied, aneuploidy findings were confirmed in 94.5% of TE biopsies analyzed (n = 189/200; 95%CI=90.37–37.22), while 5.5% showed a mosaic profile (50–70%) but uniformly abnormal ICM. Positive (PPV) and negative predictive value (NPV) per chromosome were 100.0% (n = 189/189; 95%CI=98.07–100.00) and 99.5% (n = 2192/2203; 95%CI=99.11–99.75) respectively. When the upper cut-off was experimentally placed at 80% of abnormal cells, a significant decrease (p-value=0.0097) in the percentage of confirmed aneuploid calls was observed (86.5%; n = 173/200; 95%CI=80.97–90.91), resulting in mosaicism overcalling, especially in the high range (50–80%). Less stringent thresholds led to extremely high PPV (100.0%; n = 173/173; 95%CI=97.89–100.00), while NPV decreased to 98.8% (n = 2192/2219; 95%CI=98.30–99.23). Furthermore, no additional true mosaic patterns were identified with the use of wide range thresholds for aneuploidy classification. Limitations, reasons for caution This approach involved the analysis of aneuploidy CNV thresholds at the embryo level and lacked from genotyping-based confirmation analysis. Moreover, aneuploid embryos with known meiotic partial deletion/duplication were not included. Wider implications of the findings: The use of wide thresholds for detecting intermediate chromosomal CNV up to 80% doesn’t improve PGT-A ability to discriminate true mosaic from uniformly aneuploid embryos, lowering overall diagnostic accuracy. Hence, a proportion of the embryos diagnosed as mosaic using wide calling thresholds may actually be uniformly aneuploid and inadvertently transferred. Trial registration number N/A

Tool Wear Mechanisms during Machining of Alloy 625

2011 ◽  
Vol 275 ◽  
pp. 204-207 ◽  
Author(s):  
Lenka Fusova ◽  
Pawel Rokicki ◽  
Zdeněk Spotz ◽  
Karel Saksl ◽  
Carsten Siemers
Keyword(s):  
Wear Mechanisms ◽  
Gas Turbines ◽  
Metal Cutting ◽  
Elevated Temperatures ◽  
Orthogonal Cutting ◽  
Cutting Speed ◽  
Production Costs ◽  
Chemical Compositions ◽  
Alloy 625 ◽  
Wide Range

Nickel-base superalloys like Alloy 625 are widely used in power generation applications due to their unique properties especially at elevated temperatures. During the related component manufacturing for gas turbines up to 50% of the material has to be removed by metal cutting operations like milling, turning or drilling. As a result of high strength and toughness the machinability of Alloy 625 is generally poor and only low cutting speeds can be used. High-speed cutting of Alloy 625 on the other hand gets more important in industry to reduce manufacturing times and thus production costs. The cutting speed represents one of the most important factors that have influences on the tool life. The aim of this study is the analyses of wear mechanisms occurring during machining of Alloy 625. Orthogonal cutting experiments have been performed and different process parameters have been varied in a wide range. New and worn tools have been investigated by stereo microscopy, optical microscopy and scanning electron microscopy. Energy-dispersive X-ray analyses were used for the investigation of chemical compositions of the tool's surface as well as the nature of reaction products formed during the cutting process. Wear mechanisms observed in the machining experiments included abrasion, fracture and tribochemical effects. Specific wear features appeared depending on the mechanical and thermal conditions generated in the wear zones.

scholarly journals Technical note: GUARD – An automated fluid sampler preventing sample alteration by contamination, evaporation and gas exchange, suitable for remote areas and harsh conditions

2018 ◽  
Author(s):  
Arno Hartmann ◽  
Marc Luetscher ◽  
Ralf Wachter ◽  
Philipp Holz ◽  
Elisabeth Eiche ◽  
...  
Keyword(s):  
Gas Exchange ◽  
Field Experiments ◽  
Hydrological Cycle ◽  
Technical Note ◽  
Production Costs ◽  
Environmental Research ◽  
Remote Areas ◽  
Wide Range ◽  
Public And Private Sector

Abstract. Automated water sampling devices adapted to field operation have proven highly useful for environmental research as well as in the public and private sector, where natural or artificial waters need to be tested regularly for compliance with environmental and health regulations. Such autosamplers are already available on the market in slightly differing versions, but none of these devices are capable of sealing the collected samples to prevent sample alteration by contamination, evaporation or gas exchange. In many sampling cases, however, this feature is essential, for instance for studying the hydrological cycle based on isotopes in rainwater, or for monitoring waters contaminated with toxic gases or other volatile compounds detrimental to biota and human health. Therefore, we have developed a new mobile autosampler, which injects water samples directly into airtight vials, thus preventing any sample alteration. Further advantages include low production costs, compact dimensions and low weight allowing for easy transport, a wide range of selectable sampling intervals as well as a low power consumption, which make it suitable for long-term applications even in remote areas and harsh (outdoor) conditions due to its heavy-duty water-proof casing. In this paper, we demonstrate (1) the sampler's mechanical functioning, (2) the long-term stability of the collected samples with regard to evaporation and gas exchange and (3) the potential of our device in a wide variety of applications drawing on laboratory and field experiments in different karst caves, which represent one of the most challenging sampling environments.

Sign in / Sign up

Export Citation Format

Share Document