scholarly journals Design and Analysis of Linear Fault-Tolerant Permanent-Magnet Vernier Machines

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Liang Xu ◽  
Jinghua Ji ◽  
Guohai Liu ◽  
Yi Du ◽  
Hu Liu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Permanent Magnet ◽  
Electromotive Force ◽  
Fault Tolerant ◽  
Time Stepping ◽  
Detent Force ◽  
Electromagnetic Characteristics ◽  
Long Stroke ◽  
High Thrust

This paper proposes a new linear fault-tolerant permanent-magnet (PM) vernier (LFTPMV) machine, which can offer high thrust by using the magnetic gear effect. Both PMs and windings of the proposed machine are on short mover, while the long stator is only manufactured from iron. Hence, the proposed machine is very suitable for long stroke system applications. The key of this machine is that the magnetizer splits the two movers with modular and complementary structures. Hence, the proposed machine offers improved symmetrical and sinusoidal back electromotive force waveform and reduced detent force. Furthermore, owing to the complementary structure, the proposed machine possesses favorable fault-tolerant capability, namely, independent phases. In particular, differing from the existing fault-tolerant machines, the proposed machine offers fault tolerance without sacrificing thrust density. This is because neither fault-tolerant teeth nor the flux-barriers are adopted. The electromagnetic characteristics of the proposed machine are analyzed using the time-stepping finite-element method, which verifies the effectiveness of the theoretical analysis.

scholarly journals A Novel Interior Permanent Magnet Machine with Magnet Axis Shifted Effect for Electric Vehicle Applications

2021 ◽  
Vol 12 (4) ◽  
pp. 189
Author(s):  
Yongsheng Ge ◽  
Hui Yang ◽  
Weijia Wang ◽  
Heyun Lin ◽  
Ya Li
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Permanent Magnet ◽  
Basic Principle ◽  
Design Parameters ◽  
Asymmetry Ratio ◽  
Interior Permanent Magnet ◽  
Ipm Machine ◽  
Electromagnetic Characteristics ◽  
Magnet Axis

This paper proposes a novel interior permanent magnet (IPM) machine with asymmetrical PM configuration. Different from the traditional IPM counterparts, the proposed machine can perform a magnet axis shifted (MAS) effect. The magnet axis is shifted towards the reluctance axis so that a higher resultant torque capability can be obtained. Firstly, the configuration and the basic principle of the proposed machine are described. The design parameters are optimized to improve the torque capability, and the effect of the PM asymmetry ratio on the torque performance is then evaluated in detail. In addition, the major electromagnetic characteristics of the optimized machine are investigated and compared with those of the Prius 2010 IPM machine by finite element method (FEM). The results demonstrate that the proposed asymmetrical PM configuration can achieve the torque improvement due to the MAS effect.

scholarly journals Comparative Analysis of Parallel Hybrid Magnet Memory Machines with Different PM Arrangements

2021 ◽  
Vol 12 (4) ◽  
pp. 177
Author(s):  
Yixian Wang ◽  
Hui Yang ◽  
Hao Zheng ◽  
Heyun Lin ◽  
Shukang Lyu
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Comparative Analysis ◽  
Permanent Magnet ◽  
Magnetic Circuit ◽  
The Finite Element Method ◽  
Hybrid Magnet ◽  
Parallel Hybrid ◽  
Electromagnetic Characteristics ◽  
Magnetic Barriers

This paper presents a comparative analysis of two parallel hybrid magnet memory machines (PHMMMs) with different permanent magnet (PM) arrangements. The proposed machines are both geometrically characterized by a parallel U-shaped hybrid PM configuration and several q-axis magnetic barriers. The configurations and operating principles of the investigated machines are introduced firstly. The effect of magnet arrangements on the performance of the proposed machines is then evaluated with a simplified magnetic circuit model. Furthermore, the electromagnetic characteristics of the proposed machines are investigated and compared by the finite-element method (FEM). The experiments on one prototype are carried out to validate the FEM results.

scholarly journals A Method to Improve Torque Density in a Flux-Switching Permanent Magnet Machine

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5308
Author(s):  
Junshuai Cao ◽  
Xinhua Guo ◽  
Weinong Fu ◽  
Rongkun Wang ◽  
Yulong Liu ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Permanent Magnet ◽  
Electromotive Force ◽  
Fem Analysis ◽  
Torque Ripple ◽  
Electromagnetic Torque ◽  
Torque Density ◽  
Output Torque ◽  
Two Machines

With the continuous development of machines, various structures emerge endlessly. In this paper, a novel 6-stator-coils/17-rotor-teeth (6/17) E-shaped stator tooth flux switching permanent magnet (FSPM) machine is introduced, which has magnets added in the dummy slots of the stator teeth. This proposed machine is parametrically designed and then compared with the conventional 6/17 E-shaped stator tooth FSPM machine through finite element method (FEM) analysis. Then, combined with the results of FEM, the performance of two machines is evaluated, such as electromagnetic torque, efficiency, back electromotive force (back-EMF). The final results show that this novel 6/17 FSPM machine has greater output torque and smaller torque ripple.

Sign in / Sign up

Export Citation Format

Share Document