scholarly journals Material Properties of the Mandibular Trabecular Bone

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Éva Lakatos ◽  
Lóránt Magyar ◽  
Imre Bojtár
Keyword(s):  
Numerical Simulation ◽  
Trabecular Bone ◽  
Young’S Modulus ◽  
Material Properties ◽  
Young's Modulus ◽  
Element Model ◽  
Cortical Layer ◽  
Compression Tests ◽  
The Individual ◽  
And Storage

The present paper introduces a numerical simulation aided, experimental method for the measurement of Young’s modulus of the trabecular substance in the human mandible. Compression tests were performed on fresh cadaveric samples containing trabecular bone covered with cortical layer, thus avoiding the destruction caused by the sterilization, preservation, and storage and the underestimation of the stiffness resulting from the individual failure of the trabeculae cut on the surfaces. The elastic modulus of the spongiosa was determined by the numerical simulation of each compression test using a specimen specific finite element model of each sample. The received mandibular trabecular bone Young’s modulus values ranged from 6.9 to 199.5 MPa.

scholarly journals Influence of Degradation Products on the Elastic Stiffness Properties of Porous Absorbable Scaffolds Made From Bioabsorbable Metals

2021 ◽  
Author(s):  
Jannik Bühring ◽  
Maximilian Voshage ◽  
Johannes Heinrich Schleifenbaum ◽  
Holger Jahr ◽  
Kai-Uwe Schröder
Keyword(s):  
Finite Element ◽  
Young’S Modulus ◽  
Degradation Products ◽  
Young's Modulus ◽  
Element Model ◽  
Elastic Stiffness ◽  
Porous Scaffolds ◽  
Compression Tests ◽  
Substrate Layer ◽  
Stiffness Properties

For orthopaedic applications, additive manufactured (AM) porous scaffolds made of absorbable metals like magnesium, zinc or iron are of particular interest. They do not only offer the potential to design and fabricate bio-mimetic or rather bone equivalent mechanical properties, they also do not need to be removed in further surgery. Located in a physiological environment, scaffolds made of absorbable metals show a decreasing Young’s modulus over time, due to product dissolution. For WE43 scaffolds, during the first days an increase of the smeared Young's modulus can be observed, which is mainly attributed to a forming substrate layer of degradation products on the struts surfaces. In this study the influence of degradation products on the stiffness properties of metallic scaffolds is investigated. For this, analytical calculations and finite element simulations are performed to study the influence of the substrate layer thickness and Young's modulus for single struts and for a new scaffold geometry with adapted polar f2cc,z unit cells. The finite element model is further validated by compression tests on AM scaffolds made from Zn1Mg. The results show, that even low thicknesses and Young's moduli of the substrate layer increases significantly the smeared Young's modulus under axial compression.

scholarly journals Influence of Degradation Product Thickness on the Elastic Stiffness of Porous Absorbable Scaffolds Made from an Bioabsorbable Zn–Mg Alloy

Materials ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6027
Author(s):  
Jannik Bühring ◽  
Maximilian Voshage ◽  
Johannes Henrich Schleifenbaum ◽  
Holger Jahr ◽  
Kai-Uwe Schröder
Keyword(s):  
Finite Element ◽  
Young’S Modulus ◽  
Degradation Products ◽  
Young's Modulus ◽  
Element Model ◽  
Elastic Stiffness ◽  
Porous Scaffolds ◽  
Compression Tests ◽  
Young’S Moduli ◽  
Substrate Layer

For orthopaedic applications, additive manufactured (AM) porous scaffolds made of absorbable metals such as magnesium, zinc or iron are of particular interest. They do not only offer the potential to design and fabricate bio-mimetic or rather bone-equivalent mechanical properties, they also do not need to be removed in further surgery. Located in a physiological environment, scaffolds made of absorbable metals show a decreasing Young’s modulus over time, due to product dissolution. For magnesium-based scaffolds during the first days an increase of the smeared Young’s modulus can be observed, which is mainly attributed to a forming substrate layer of degradation products on the strut surfaces. In this study, the influence of degradation products on the stiffness properties of metallic scaffolds is investigated. For this, analytical calculations and finite-element simulations are performed to study the influence of the substrate layer thickness and Young’s modulus for single struts and for a new scaffold geometry with adapted polar cubic face-centered unit cells with vertical struts (f2cc,z). The finite-element model is further validated by compression tests on AM scaffolds made from Zn1Mg (1 wt% Mg). The results show that even low thicknesses and Young’s moduli of the substrate layer significantly increases the smeared Young’s modulus under axial compression.

Contribution of Three-Dimensional Trabecular Bone Microstructure of the Proximal Femur to its Mechanical Properties as Assessed by Micro-Finite Element Analysis

2006 ◽  
Vol 321-323 ◽  
pp. 278-281
Author(s):  
Wen Quan Cui ◽  
Ye Yeon Won ◽  
Myong Hyun Baek ◽  
Kwang Kyun Kim
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Trabecular Bone ◽  
Young’S Modulus ◽  
Young's Modulus ◽  
Bone Microarchitecture ◽  
Element Model ◽  
Micro Ct ◽  
Micro Computed Tomography ◽  
Element Analysis

The purpose of this study was to investigate the contribution of the microstructural properties of trabecular bone in predicting its elastic modulus in the intertrochanteric region. A total of 15 trabecular bone core specimens were obtained from the proximal femurs of patients undergoing total hip arthroplasty. The micro-computed tomography (micro-CT) was used to scan each specimen to obtain micro-morphology. Microstructural parameters were directly calculated using software. Micro-CT images were converted to micro-finite element model using meshing technique, and then micro-finite element analysis (FEA) was performed to assess the mechanical property (Young’s modulus) of trabecular bone. The results showed that the ability to explain this variance of Young’s modulus is improved by combining the structural indices with each other. It suggested that assessment of bone microarchitecture should be added as regards detection of osteoporosis and evaluation of the efficacy of drug treatments for osteoporosis.

Numerical Simulation of the Mechanical Behaviour of the Multi-Walled Carbon Nanotubes

2017 ◽  
Vol 47 ◽  
pp. 106-119 ◽  
Author(s):  
Nataliya A. Sakharova ◽  
André F.G. Pereira ◽  
Jorge M. Antunes ◽  
José Valdemar Fernandes
Keyword(s):  
Numerical Simulation ◽  
Carbon Nanotubes ◽  
Young’S Modulus ◽  
Mechanical Behaviour ◽  
Young's Modulus ◽  
Element Model ◽  
Multi Walled Carbon Nanotubes ◽  
Simplified Finite Element Model ◽  
Walled Carbon Nanotubes ◽  
Bending Loading

The mechanical behaviour of non-chiral multi-walled carbon nanotubes under tensile and bending loading conditions was investigated. For this purpose, a simplified finite element model of armchair and zigzag multi-walled carbon nanotubes, which does not take into account the van der Waals forces acting between layers, was tested in order to evaluate their tensile and bending rigidities, as well as the Young’s modulus. The current numerical simulation results are compared with data reported in the literature. The robustness of the simplified model for evaluation of the Young’s modulus of multi-walled carbon nanotubes is discussed.

Mechanical properties of FeAlSi powders prepared by mechanical alloying from different initial feedstock materials

2019 ◽  
Vol 107 (2) ◽  
pp. 207 ◽  
Author(s):  
Jaroslav Čech ◽  
Petr Haušild ◽  
Miroslav Karlík ◽  
Veronika Kadlecová ◽  
Jiří Čapek ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Alloying ◽  
Young’S Modulus ◽  
Milling Time ◽  
Young's Modulus ◽  
Element Model ◽  
X Ray Diffraction ◽  
X Ray ◽  
Powder Particles ◽  
Complete Homogenization

FeAl20Si20 (wt.%) powders prepared by mechanical alloying from different initial feedstock materials (Fe, Al, Si, FeAl27) were investigated in this study. Scanning electron microscopy, X-ray diffraction and nanoindentation techniques were used to analyze microstructure, phase composition and mechanical properties (hardness and Young’s modulus). Finite element model was developed to account for the decrease in measured values of mechanical properties of powder particles with increasing penetration depth caused by surrounding soft resin used for embedding powder particles. Progressive homogenization of the powders’ microstructure and an increase of hardness and Young’s modulus with milling time were observed and the time for complete homogenization was estimated.

Size- and temperature-dependent Young's modulus and size-dependent thermal expansion coefficient of thin films

2016 ◽  
Vol 18 (31) ◽  
pp. 21508-21517 ◽  
Author(s):  
Xiao-Ye Zhou ◽  
Bao-Ling Huang ◽  
Tong-Yi Zhang
Keyword(s):  
Thin Films ◽  
Thermal Expansion ◽  
Young’S Modulus ◽  
Thermal Expansion Coefficient ◽  
Expansion Coefficient ◽  
Material Properties ◽  
Essential Role ◽  
Young's Modulus ◽  
Temperature Dependent ◽  
Size Dependent

Surfaces of nanomaterials play an essential role in size-dependent material properties.

The Material Properties of Bone-Particle Impregnated PMMA

1986 ◽  
Vol 108 (2) ◽  
pp. 141-148 ◽  
Author(s):  
H. C. Park ◽  
Y. K. Liu ◽  
R. S. Lakes
Keyword(s):  
Shear Modulus ◽  
Young’S Modulus ◽  
Material Properties ◽  
Room Temperature ◽  
Particle Concentration ◽  
Young's Modulus ◽  
Higher Order ◽  
Particle Content ◽  
Bone Particle ◽  
Perfect Bonding

The elastic Young’s modulus and shear modulus of bone-particle impregnated polymethylmethacrylate (PMMA) has been measured experimentally at room temperature as a function of bone particle concentration. It was found that the moduli increased with increasing bone particle content. This increase was less than the stiffness increase predicted by higher-order composite theory [1, 2] under the assumption of perfect bonding between particles and matrix. It was concluded that a bond existed but that it was not a perfect bond.

The Effect of Design Changes on Sound Transmission through a Building

1996 ◽  
Vol 3 (3) ◽  
pp. 145-185
Author(s):  
Robert J.M. Craik
Keyword(s):  
Young’S Modulus ◽  
Poisson’S Ratio ◽  
Young's Modulus ◽  
Sound Transmission ◽  
Poisson's Ratio ◽  
Analysis Model ◽  
Room Size ◽  
Design Changes ◽  
Small Change ◽  
The Individual

A statistical energy analysis model of a building was used to assess the effect of design changes on sound transmission. Systematic changes were made to the material properties (density, Young's modulus, Poisson's ratio and internal loss factor) and to the dimensions (thickness and room size). These changes resulted in a redistribution of the energy throughout the building causing the noise level to go up in some rooms and to go down in others. For each case examined it was found that the effect of several changes could be estimated from the sum of the individual changes. Thus a change of 20% in the density resulted in approximately double the change in DnTw that was obtained from a 10% change in density. The same additive effect was also found to apply if more than one variable was changed at the same time. Thus the change in DnTw resulting from a small change in Young's modulus for the floors and a small change in the density of the walls can be estimated from the sum of the two individual effects. Changes to the thickness and density of the walls and floors have the greatest effect on sound transmission whilst changes to Young's modulus and Poisson's ratio have a much smaller effect. Damping can also have a significant effect on transmission particularly far from the source.

Sign in / Sign up

Export Citation Format

Share Document