scholarly journals Numerical Study on Flow and Heat Transfer Performance of Rectangular Heat Sink with Compound Heat Transfer Enhancement Structures

2014 ◽  
Vol 6 ◽  
pp. 457650 ◽  
Author(s):  
Di Zhang ◽  
Shuai Guo ◽  
Zhongyang Shen ◽  
Yonghui Xie
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Heat Transfer Performance ◽  
Numerical Study ◽  
Transfer Performance ◽  
Transfer Enhancement ◽  
Flow And Heat Transfer

scholarly journals Enhanced heat transfer characteristics of conjugated air jet impingement on a finned heat sink

2017 ◽  
Vol 21 (1 Part A) ◽  
pp. 279-288 ◽  
Author(s):  
Shuxia Qiu ◽  
Peng Xu ◽  
Liping Geng ◽  
Arun Mujumdar ◽  
Zhouting Jiang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Heat Transfer Performance ◽  
Cooling System ◽  
Flow Characteristics ◽  
Jet Impingement ◽  
Transfer Performance ◽  
Transfer Enhancement ◽  
Air Jet

Air jet impingement is one of the effective cooling techniques employed in micro-electronic industry. To enhance the heat transfer performance, a cooling system with air jet impingement on a finned heat sink is evaluated via the computational fluid dynamics method. A two-dimensional confined slot air impinging on a finned flat plate is modeled. The numerical model is validated by comparison of the computed Nusselt number distribution on the impingement target with published experimental results. The flow characteristics and heat transfer performance of jet impingement on both of smooth and finned heat sinks are compared. It is observed that jet impingement over finned target plate improves the cooling performance significantly. A dimensionless heat transfer enhancement factor is introduced to quantify the effect of jet flow Reynolds number on the finned surface. The effect of rectangular fin dimensions on impingement heat transfer rate is discussed in order to optimize the cooling system. Also, the computed flow and thermal fields of the air impingement system are examined to explore the physical mechanisms for heat transfer enhancement.

Enhancing Heat Transfer of Air-Cooled Heat Sinks Using Piezoelectrically-Driven Agitators and Synthetic Jets

2011 ◽  
Author(s):  
Youmin Yu ◽  
Terrence Simon ◽  
Min Zhang ◽  
Taiho Yeom ◽  
Mark North ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Heat Transfer Performance ◽  
Single Channel ◽  
Synthetic Jets ◽  
Heat Sinks ◽  
Transfer Performance ◽  
Transfer Enhancement ◽  
Enhancing Heat Transfer

Air-cooled heat sinks prevail in microelectronics cooling due to their high reliability, low cost, and simplicity. But, their heat transfer performance must be enhanced if they are to compete for high-flux applications with liquid or phase-change cooling. Piezoelectrically-driven agitators and synthetic jets have been reported as good options in enhancing heat transfer of surfaces close to them. This study proposes that agitators and synthetic jets be integrated within air-cooled heat sinks to significantly raise heat transfer performance. A proposed integrated heat sink has been investigated experimentally and with CFD simulations in a single channel heat sink geometry with an agitator and two arrays of synthetic jets. The single channel unit is a precursor to a full scale, multichannel array. The agitator and the jet arrays are separately driven by three piezoelectric stacks at their individual resonant frequencies. The experiments show that the combination of the agitator and synthetic jets raises the heat transfer coefficient of the heat sink by 80%, compared with channel flow only. The 3D computations show similar enhancement and agree well with the experiments. The numerical simulations attribute the heat transfer enhancement to the additional air movement generated by the oscillatory motion of the agitator and the pulsating flow from the synthetic jets. The component studies reveal that the heat transfer enhancement by the agitator is significant on the fin side and base surfaces and the synthetic jets are most effective on the fin tips.

Numerical Study of Fluid Flow and Heat Transfer in the Enhanced Microchannel With Oblique Fins

2013 ◽  
Vol 135 (4) ◽  
Author(s):  
Y. J. Lee ◽  
P. S. Lee ◽  
S. K. Chou
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Numerical Study ◽  
Leading Edge ◽  
Secondary Flows ◽  
Microchannel Heat Sink ◽  
Transfer Enhancement ◽  
Flow And Heat Transfer

Sectional oblique fins are employed in contrast to continuous fins in order to modulate flow in microchannel heat sink. The breakage of continuous fin into oblique sections leads to the reinitialization of both hydrodynamic and thermal boundary layers at the leading edge of each oblique fin, effectively reducing the thickness of boundary layer. This regeneration of entrance effect causes the flow to be always in a developing state thus resulting in better heat transfer. In addition, the presence of smaller oblique channels diverts a small fraction of flow into the adjacent main channels. The secondary flows thus created improve fluid mixing which serves to further enhance the heat transfer. Detailed numerical study on the fluid flow and heat transfer of this passive heat transfer enhancement technique provides insight to the local hydrodynamics and thermal development along the oblique fin. The uniquely skewed hydrodynamic and thermal profiles are identified as the key to the highly augmented and uniform heat transfer performance across the heat sink. The associated pressure drop penalty is much smaller than the achieved heat transfer enhancement, rendering it as an effective heat transfer enhancement scheme for single phase microchannel heat sink.

Active Heat Transfer Enhancement in Single-Phase Microchannels by Using Synthetic Jets

2013 ◽  
Vol 5 (1) ◽  
Author(s):  
Ruixian Fang ◽  
Jamil A. Khan
Keyword(s):  
Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Heat Sink ◽  
Heat Transfer Performance ◽  
Synthetic Jets ◽  
Transfer Performance ◽  
Microchannel Flow ◽  
Transfer Enhancement ◽  
Pressure Dynamics ◽  
A Minor

The present work experimentally investigates the effect of synthetic jets on the heat transfer performance in a microchannel heat sink. The heat sink consists of five parallel rectangular microchannels measuring 500 μm wide, 500 μm deep, and 26 mm long each. An array of synthetic jets with 100 μm diameter orifices is placed right above the microchannel with a total of eight jet orifices per channel. Microjets are synthesized from the fluid flowing through the microchannel. Periodic disturbances are generated when the synthetic jets interact with the microchannel flow. Heat transfer performance is enhanced as local turbulence is generated and penetrates the thermal boundary layer near heated channel wall. The effects of synthetic jets on microchannels heat transfer performance are studied for several parameters including the channel stream flow rate, the synthetic jets strength and operating frequency. It shows that the synthetic jets have higher heat transfer enhancement for microchannel flow at lower channel flow rates. A maximum of 130% heat transfer enhancement is achieved for some test cases. The pressure dynamics introduced by the synthetic jets are also investigated. The synthetic jets cause a minor increase in the pressure drop.

scholarly journals Convective Heat Transfer of Ethanol/Polyalphaolefin Nanoemulsion in Mini- and Microchannel Heat Exchangers for High Heat Flux Electronics Cooling

2021 ◽  
Author(s):  
Jaime Rios ◽  
Mehdi Kabirnajafi ◽  
Takele Gameda ◽  
Raid Mohammed ◽  
Jiajun Xu
Keyword(s):  
Heat Transfer ◽  
Convective Heat Transfer ◽  
Heat Transfer Enhancement ◽  
Convective Heat ◽  
Phase Flow ◽  
Transfer Performance ◽  
Transfer Enhancement ◽  
Heat Transfer Characteristics ◽  
Two Phase ◽  
Flow And Heat Transfer

The present study experimentally and numerically investigates the flow and heat transfer characteristics of a novel nanostructured heat transfer fluid, namely, ethanol/polyalphaolefin nanoemulsion, inside a conventionally manufactured minichannel of circular cross section and a microchannel heat exchanger of rectangular cross section manufactured additively using the Direct Metal Laser Sintering (DMLS) process. The experiments were conducted for single-phase flow of pure polyalphaolefin (PAO) and ethanol/PAO nanoemulsion fluids with two ethanol concentrations of 4 wt% and 8 wt% as well as for two-phase flow boiling of nanoemulsion fluids to study the effect of ethanol nanodroplets on the convective flow and heat transfer characteristics. Furthermore, the effects of flow regime of the working fluids on the heat transfer performance for both the minichannel and microchannel heat exchangers were examined within the laminar and transitional flow regimes. It was found that the ethanol/PAO nanoemulsion fluids can improve convective heat transfer compared to that of the pure PAO base fluid under both single- and two-phase flow regimes. While the concentration of nanoemulsion fluids did not reflect a remarkable distinction in single-phase heat transfer performance within the laminar regime, a significant heat transfer enhancement was observed using the nanoemulsion fluids upon entering the transitional flow regime. The heat transfer enhancement at higher concentrations of nanoemulsion within the transitional regime is mainly attributed to the enhanced interaction and interfacial thermal transport between ethanol nanodroplets and PAO base fluid. For two-phase flow boiling, heat transfer coefficients of ethanol/PAO nanoemulsion fluids were further enhanced when the ethanol nanodroplets underwent phase change. A comparative study on the flow and heat transfer characteristics was also implemented between the traditionally fabricated minichannel and additively manufactured microchannel of similar dimensions using the same working fluid of pure PAO and the same operating conditions. The results revealed that although the DMLS fabricated microchannel posed a higher pressure loss, a substantial heat transfer enhancement was achieved as compared to the minichannel heat exchanger tested under the same conditions. The non-post processed surface of the DMLS manufactured microchannel is likely to be the main contributor to the augmented heat transfer performance. Further studies are required to fully appreciate the possible mechanisms behind this phenomenon as well as the convective heat transfer properties of nanoemulsion fluids.

Optimization of Flow and Heat Transfer for a New Double-Layered Microchannel Heat Sink

2019 ◽  
Author(s):  
Huanling Liu ◽  
Bin Zhang
Keyword(s):  
Heat Transfer ◽  
Heat Sink ◽  
Heat Transfer Performance ◽  
Microchannel Heat Sink ◽  
Transfer Performance ◽  
Temperature Uniformity ◽  
Flow And Heat Transfer ◽  
Fluent Simulation ◽  
New Type ◽  
Improved Design

Abstract In this paper, we propose a new type of DL-MCHS to improve the substrate temperature uniformity of the microchannel heat sink, and conduct the optimization of the New DL-MCHS. The heat transfer and friction characteristics of the novel DL-MCHS are studied by numerical simulation. We compare the heat transfer performance the new DL-MCHS with the traditional TDL-MCHS (the DL-MCHS with truncated top channels λ = 0.38). The results prove the effectiveness of the improved design by FLUENT simulation. When the inlet velocity is kept constant and coolant is water, the heat transfer performance of the New DL-MCHS is higher than that of TDL-MCHS leading to an increase of the temperature uniformity. In order to achieving the best overall heat transfer performance, an optimization of New DL-MCHS is performed by GA (genetic algorithm).

Heat Transfer Enhancement in a Microchannel Heat Sink with Trapezoidal Cavities on the Side Walls

2016 ◽  
Vol 819 ◽  
pp. 127-131
Author(s):  
Navin Raja Kuppusamy ◽  
N.N.N. Ghazali ◽  
Saidur Rahman ◽  
M.A. Omar Awang ◽  
Hussein A. Mohammed
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Heat Sink ◽  
Heat Transfer Performance ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Fluid Mixing ◽  
Microchannel Heat Sink ◽  
Transfer Enhancement ◽  
Side Walls

The present study focuses on the numerical study of thermal and flow characteristics in a microchannel heat sink with alternating trapezoidal cavities in sidewall (MTCS). The effects of flow rate and heat flux on friction factor and Nusselt are presented. The results showed considerable improvement heat transfer performance micro channel heat sink with alternating trapezoidal cavities in sidewall with an acceptable pressure drop. The heat transfer rate has improved in the cavity area due the greater fluid mixing in fluid vortices and thermal boundary layer disruption. The slipping over the reentrant cavities and pressure gain reduces pressure drop appears as the reason behind of only minor pressure drop due to the cavities.

A Numerical Study of the Flow and Heat Transfer in the Pin Fin-Dimple Channels With Various Dimple Depths

2012 ◽  
Vol 134 (7) ◽  
Author(s):  
Yu Rao ◽  
Yamin Xu ◽  
Chaoyi Wan
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Convective Heat Transfer ◽  
Heat Transfer Performance ◽  
Numerical Study ◽  
Transfer Performance ◽  
Number Range ◽  
Flow Friction ◽  
Pin Fin ◽  
Flow And Heat Transfer

A numerical study was conducted to investigate the effects of dimple depth on the flow and heat transfer characteristics in a pin fin-dimple channel, where dimples are located spanwisely between the pin fins. The study aimed at promoting the understanding of the underlying convective heat transfer mechanisms in the pin fin-dimple channels and improving the cooling design for the gas turbine components. The flow structure, friction factor, and heat transfer performance of the pin fin-dimple channels with various dimple depths have been obtained and compared with each other for the Reynolds number range of 8200–80,800. The study showed that, compared to the pin fin channel, the pin fin-dimple channels have further improved convective heat transfer performance, and the pin fin-dimple channel with deeper dimples shows relatively higher Nusselt number values. The study still showed a dimple depth-dependent flow friction performance for the pin fin-dimple channels compared to the pin fin channel, and the pin fin-dimple channel with shallower dimples shows relatively lower friction factors over the studied Reynolds number range. Furthermore, the computations showed the detailed characteristics in the distribution of the velocity and turbulence level in the flow, which revealed the underlying mechanisms for the heat transfer enhancement and flow friction reduction phenomenon in the pin fin-dimple channels.

Sign in / Sign up

Export Citation Format

Share Document