scholarly journals Preparation of Cd-Loaded In2O3Hollow Nanofibers by Electrospinning and Improvement of Formaldehyde Sensing Performance

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Ruijin Hu ◽  
Jing Wang ◽  
Pengpeng Chen ◽  
Yuwen Hao ◽  
Chunli Zhang ◽  
...  
Keyword(s):  
Molar Ratio ◽  
Formaldehyde Concentration ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Grain Sizes ◽  
Transmission Electron ◽  
Electrospinning Method ◽  
Formaldehyde Sensing ◽  
Small Grains

Pure In2O3and Cd-loaded In2O3hollow and porous nanofibers with different Cd/In molar ratios (1/20, 1/10, 1/1) were synthesized by electrospinning method. X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM), and transmission electron microscopy (TEM) were used to characterize the nanofibers. The porous nanofibers were composed of small grains. The average grain sizes and the diameters of Cd-loaded In2O3nanofibers increased with the increasing of Cd/In molar ratios. The formaldehyde sensing properties of the sensors based on pure In2O3and Cd-loaded In2O3nanofibers were investigated in formaldehyde concentration range of 0.5∼100 ppm. Moreover, the selectivity of those sensors was studied by testing responses to methanol, toluene, ethanol, acetone, and ammonia. The result showed that Cd-loaded In2O3nanofibers with Cd/In molar ratio of 1/10 possessed the highest response value and good selectivity at operating temperature 280°C. In addition, the formaldehyde sensing mechanism of the sensors based on Cd-loaded nanofibers was briefly analyzed.

scholarly journals Liquid petroleum gas sensing performance enhanced by CuO modification of nanocrystalline ZnO-TiO2

2016 ◽  
Vol 34 (3) ◽  
pp. 571-581
Author(s):  
R.B. Pedhekar ◽  
F.C. Raghuwanshi ◽  
V.D. Kapse
Keyword(s):  
Thick Film ◽  
Gas Sensing ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Transmission Electron ◽  
Liquid Petroleum Gas ◽  
Synthesized Materials ◽  
Sensing Characteristics

AbstractNanocrystalline ZnO-TiO2 (with molar ratios 9:1, 7:3, 1:1, 3:7 and 1:9) were successfully synthesized by hydrothermal method. Synthesized materials were examined with the help of X-ray diffraction and transmission electron microscope. Liquid petroleum gas sensing characteristics of the ZnO-TiO2 films were investigated at different operating temperatures. The ZnO-TiO2 thick film (with 1:1 molar ratio) exhibited good response toward liquid petroleum gas as compared to other investigated compositions. Further, liquid petroleum gas sensing characteristics of CuO modified ZnO-TiO2 thick films were investigated. 0.2 M CuO modified ZnO-TiO2 thick film exhibited excellent liquid petroleum gas sensing characteristics such as higher response (~ 1637.49 at 185 °C) with quick response time (~30 s), low recovery time (~70 s), excellent repeatability and stability at low operating temperature.

Convenient Route to Cu-Ag Bimetallic Nanoleaflets with High Content of Cu and their Electrochemical Properties

2017 ◽  
Vol 727 ◽  
pp. 395-402
Author(s):  
Zi Run Wang ◽  
Xin Liu ◽  
Gui Qi Xie ◽  
Yi Wu ◽  
Ming Nie ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Reduction Method ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Phase Reduction ◽  
Transmission Electron ◽  
Convenient Route

Cu-Ag alloy nanoparticles were synthesized by a liquid phase reduction method. Using sodium formaldehyde sulfoxylate (SFS) as reducing agents, copper-silver bimetallic nanoleaflets with high content of Cu were prepared. The obtained Cu-Ag bimetallic nanocrystal were characterized by powder X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDX), field emission scanning electron microscope (FESEM), high resolution transmission electron microscopy (HRTEM) and transmission electron microscopy (TEM). Different molar ratio of Cu-Ag bimetallic nanomaterials could produce different morphologies. The surfactant β-CD plays a crucial role on the structure of the products. The different molar ratios of Cu-Ag were also investigated. The electrochemical activity was evaluated using cyclic voltammetry (CV), electrochemical hydrogen evolution reaction (HER) in a 0.5M Na2SO4 electrolyte.

scholarly journals Photocatalytic Reduction of CO2 to Methanol Using a Copper-Zirconia Imidazolate Framework

Catalysts ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 346
Author(s):  
Sonam Goyal ◽  
Maizatul Shima Shaharun ◽  
Ganaga Suriya Jayabal ◽  
Chong Fai Kait ◽  
Bawadi Abdullah ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalyst Support ◽  
Oxidation Potential ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Optimum Parameters ◽  
Reduction Of Co2 ◽  
Enhanced Yield

A set of novel photocatalysts, i.e., copper-zirconia imidazolate (CuZrIm) frameworks, were synthesized using different zirconia molar ratios (i.e., 0.5, 1, and 1.5 mmol). The photoreduction process of CO2 to methanol in a continuous-flow stirred photoreactor at pressure and temperature of 1 atm and 25 °C, respectively, was studied. The physicochemical properties of the synthesized catalysts were studied using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectroscopy. The highest methanol activity of 818.59 µmol/L.g was recorded when the CuZrIm1 catalyst with Cu/Zr/Im/NH4OH molar ratio of 2:1:4:2 (mmol/mmol/mmol/M) was employed. The enhanced yield is attributed to the presence of Cu2+ oxidation state and the uniformly dispersed active metals. The response surface methodology (RSM) was used to optimize the reaction parameters. The predicted results agreed well with the experimental ones with the correlation coefficient (R2) of 0.99. The optimization results showed that the highest methanol activity of 1054 µmol/L.g was recorded when the optimum parameters were employed, i.e., stirring rate (540 rpm), intensity of light (275 W/m2) and photocatalyst loading (1.3 g/L). The redox potential value for the CuZrIm1 shows that the reduction potential is −1.70 V and the oxidation potential is +1.28 V for the photoreduction of CO2 to methanol. The current work has established the potential utilization of the imidazolate framework as catalyst support for the photoreduction of CO2 to methanol.

scholarly journals New Electrospun ZnO:MoO3 Nanostructures: Preparation, Characterization and Photocatalytic Performance

Nanomaterials ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1476 ◽  
Author(s):  
Petronela Pascariu ◽  
Mihaela Homocianu ◽  
Niculae Olaru ◽  
Anton Airinei ◽  
Octavian Ionescu
Keyword(s):  
Photocatalytic Performance ◽  
Molybdenum Trioxide ◽  
Blue Shift ◽  
Band Gap Energy ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Electron Microscopies ◽  
Reaction Rate Constants ◽  
Transmission Electron ◽  
Electrospinning Method

New molybdenum trioxide-incorporated ZnO materials were prepared through the electrospinning method and then calcination at 500 °C, for 2 h. The obtained electrospun ZnO:MoO3 hybrid materials were characterized by X-ray diffraction, scanning and transmission electron microscopies, ultraviolet (UV)-diffuse reflectance, UV–visible (UV–vis) absorption, and photoluminescence techniques. It was observed that the presence of MoO3 as loading material in pure ZnO matrix induces a small blue shift in the absorption band maxima (from 382 to 371 nm) and the emission peaks are shifted to shorter wavelengths, as compared to pure ZnO. Also, a slight decrease in the optical band gap energy of ZnO:MoO3 was registered after MoO3 incorporation. The photocatalytic performance of pure ZnO and ZnO:MoO3 was assessed in the degradation of rhodamine B (RhB) dye with an initial concentration of 5 mg/L, under visible light irradiation. A doubling of the degradation efficiency of the ZnO:MoO3 sample (3.26% of the atomic molar ratio of Mo/Zn) as compared to pure ZnO was obtained. The values of the reaction rate constants were found to be 0.0480 h−1 for ZnO, and 0.1072 h−1 for ZnO:MoO3, respectively.

scholarly journals Synthesis, Physical Properties and Enzymatic Degradation of Biodegradable Nanocomposites Fabricated Using Poly(Butylene Carbonate-Co-Terephthalate) and Organically Modified Layered Zinc Phenylphosphonate

Polymers ◽  
2020 ◽  
Vol 12 (9) ◽  
pp. 2149
Author(s):  
Li-Ying Tseng ◽  
Erh-Chiang Chen ◽  
Jie-Mao Wang ◽  
Tzong-Ming Wu
Keyword(s):  
Nmr Spectra ◽  
Enzymatic Degradation ◽  
Molar Ratio ◽  
Wide Angle ◽  
Mixing Process ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Organically Modified ◽  
Biodegradable Nanocomposites

A new biodegradable aliphatic-aromatic poly (butylene carbonate-co-terephthalate) (PBCT-85) with the molar ratio [BC]/[BT] = 85/15, successfully synthesized through transesterification and polycondensation processes, was identified using 1H-NMR spectra. Various weight ratios of PBCT/organically modified layered zinc phenylphosphonate (m-PPZn) nanocomposites were manufactured using the solution mixing process. Wide-angle X-ray diffraction and transmission electron microscopy were used to examine the morphology of PBCT-85/m-PPZn nanocomposites. Both results exhibited that the stacking layers of m-PPZn were intercalated into the PBCT-85 polymer matrix. The additional m-PPZn into PBCT-85 copolymer matrix significantly enhanced the storage modulus at −70 °C, as compared to that of neat PBCT-85. The lipase from Pseudomonas sp. was used to investigate the enzymatic degradation of PBCT-85/m-PPZn nanocomposites. The weight loss decreased as the loading of m-PPZn increased, indicating that the existence of m-PPZn inhibits the degradation of the PBCT-85 copolymers. This result might be attributed to the higher degree of contact angle for PBCT-85/m-PPZn nanocomposites. The PBCT-85/m-PPZn composites approved by MTT assay are appropriate for cell growth and might have potential in the application of biomedical materials.

scholarly journals ZnFe2O4-TiO2Nanoparticles within Mesoporous MCM-41

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Aidong Tang ◽  
Yuehua Deng ◽  
Jiao Jin ◽  
Huaming Yang
Keyword(s):  
Sol Gel ◽  
Rutile Phase ◽  
Band Gap Energy ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Agglomeration Of Nanoparticles ◽  
Adsorption Desorption ◽  
Mcm 41

A novel nanocomposite ZnFe2O4-TiO2/MCM-41 (ZTM) was synthesized by a sol-gel method and characterized through X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), N2adsorption-desorption, Raman spectroscopy, and ultraviolet visible (UV-vis) spectrophotometry. The results confirmed the incorporation of ZnFe2O4-TiO2nanoparticles inside the pores of the mesoporous MCM-41 host without destroying its integrity. ZnFe2O4nanoparticles can inhibit the transformation of anatase into rutile phase of TiO2. Incorporation of ZnFe2O4-TiO2within MCM-41 avoided the agglomeration of nanoparticles and reduced the band gap energy of TiO2to enhance its visible light photocatalytic activity. UV-vis absorption edges of ZTM nanocomposites redshifted with the increase of Zn/Ti molar ratio. The nanocomposite approach could be a potential choice for enhancing the photoactivity of TiO2, indicating an interesting application in the photodegradation and photoelectric fields.

Synthesis of La2NiO4+δ Nanofibers by Electrospinning Method and their Application

2018 ◽  
Vol 281 ◽  
pp. 859-864
Author(s):  
Yan Xing ◽  
Meng Fei Zhang ◽  
Tian Jun Li ◽  
Wei Pan
Keyword(s):  
Electron Microscopy ◽  
Solid Oxide Fuel Cells ◽  
Solid Oxide ◽  
Thermal Treatments ◽  
X Ray Diffraction ◽  
Mixed Conductivity ◽  
X Ray ◽  
Transmission Electron ◽  
Structure Morphology ◽  
Electrospinning Method

La2NiO4+σ nanofibers exhibiting typical Ruddlesden–Popper structure (K2NiO4) were fabricated by a facile electrospinning method. X-ray diffraction, scanning electron microscopy and transmission electron microscopy were used to analyze the structure, morphology and crystal process of the La2NiO4+σ nanofibers. For electrical properties measurement, uniaxially aligned nanofibers were directly collected and assembled into electrode. In our research, La2NiO4+σ phase forms above 873K with no impurity phase emerges during the thermal treatments. The nanofibers are smooth and uniform throughout the entire length and the grain is growing as calcination temperature increases. Furthmore, the La2NiO4+σ nanofibers own high mixed conductivity at 773K, laying good foundation for intermediate temperature solid oxide fuel cells application.

scholarly journals Preparation of Fe-DopedTiO2Nanotubes and Their Photocatalytic Activities under Visible Light

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Honghui Teng ◽  
Shukun Xu ◽  
Dandan Sun ◽  
Ying Zhang
Keyword(s):  
Visible Light ◽  
Visible Region ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Visible Absorption ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Ultrasonic Assisted ◽  
Uv Visible

Fe-doped TiO2nanotubes (Fe-TNTs) have been prepared by ultrasonic-assisted hydrothermal method. The structure and composition of the as-prepared TiO2nanotubes were characterized by transmission electron microscopy, X-ray diffraction, and UV-Visible absorption spectroscopy. Their photocatalytic activities were evaluated by the degradation of MO under visible light. The UV-visible absorption spectra of the Fe-TNT showed a red shift and an enhancement of the absorption in the visible region compared to the pure TNT. The Fe-TNTs were provided with good photocatalytic activities and photostability and under visible light irradiation, and the optimum molar ratio of Ti : Fe was found to be 100 : 1 in our experiments.

Cathode Material Li [Li0.2 Mn0.44Ni0.18Co0.18]O2 Synthesized by Molten Salt Method

2013 ◽  
Vol 690-693 ◽  
pp. 981-984
Author(s):  
Guang Xin Fan ◽  
Hui Lian Li ◽  
Shu Pu Dai ◽  
Chuan Xiang Zhang ◽  
Xue Mao Guan ◽  
...  
Keyword(s):  
Molten Salt ◽  
Specific Area ◽  
Constant Current ◽  
Molar Ratio ◽  
Molten Salt Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Structures And Properties ◽  
Constant Current Charge

In this paper, LiOH·H2O and Li2CO3, which were widely used in industry and (Mn0.533Co0.233Ni0.233) (OH)2prepared by ourselves selected as starting materials, series materials of lithium-rich layered material Li [Li0.2Mn0.44Ni0.18Co0.18]O2were obtained by a molten salt method. Their structures and properties of the materials were investigated by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and constant current charge/discharge methods. The effects of different LiOH and Li2CO3molar ratios on the Li [Li0.2Mn0.44Ni0.18Co0.18]O2structures and properties were characterized. The results of the experiments indicate that The structures of the material such as crystal structure, the specific area, particle size distribution, tap densities were controlled by adjusting the proportion of the two lithium sources. Forthermore , when the molar ratio of LiOH and Li2CO3was 3:7, the maximum discharge capacity (214.77 mAhg-1) of the cathode was obtained.

The Ti-B-N System: Nanocomposite nc-TiN/a-(TiB2, BN) and Nano-Multilayer nc-TiN/a-TiBN Thin Films

2008 ◽  
Vol 8 (5) ◽  
pp. 2713-2718
Author(s):  
Y. H. Lu ◽  
K. Chu ◽  
Y. G. Shen
Keyword(s):  
Thin Films ◽  
Dislocation Motion ◽  
Structural Barriers ◽  
Mechanical Behaviors ◽  
Bilayer Thickness ◽  
Maximum Hardness ◽  
X Ray Diffraction ◽  
X Ray ◽  
Grain Sizes ◽  
Transmission Electron

The nanostructures and mechanical properties of nanocomposite nc-TiN/a-(TiB2, BN) and nanostructured multilayers nc-TiN/a-TiBN were investigated using X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), microindentation, and stress measurements. It was found that the monolayer Ti-B-N thin films consisted of nanometer-sized crystalline (nc-) Ti(N, B) embedded into amorphous (a-) (TiB2, BN) matrix. When B content was below ∼16 at.%, two different-sized nanocrystallites with mean grain sizes of ∼3 and 9 nm respectively were embedded in a-TiB2. With increasing B incorporation (>∼27 at.%), more uniform nanograins was embedded a-(TiB2, BN). Incorporation of B not only decreased the size of nanocrystallites, but also gave rise to twinning deformation in nanocrystallites. A maximum hardness of ∼44 GPa was achieved at B content of 19 at.%. It was also found that the nanostructure and mechanical behaviors of nc-TiN/a-TiBN multilayers was dependent on the modulation length (bilayer thickness Λ). Decrease of Λ made the preferred orientation of nc-TiN gradually transform from (200) to (111). A maximum hardness of ∼30 GPa was achieved at Λ = 1.8 nm. Deflection from this Λ value decreased hardness. By contrast, the residual compressive stress value monotonically increased with decrease of Λ. The enhancement of the hardness was due to the coherent stresses and the structural barriers to dislocation motion in the interface.

Sign in / Sign up

Export Citation Format

Share Document