scholarly journals A Low Cost Carbon Nanofiber Based Spiral Inductor: Inference and Implementation

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
John Wiselin ◽  
Sreeja Balakrishnapillai Suseela ◽  
Bycil Viswambaran Jalaja ◽  
Sherin Dhas Sahayadas Padma Ramani ◽  
Rajesh Prasad ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Quality Factor ◽  
Carbon Fibers ◽  
Carbon Nanofiber ◽  
Low Cost ◽  
Simulation Software ◽  
Spiral Inductor ◽  
Hardware Implementations

This paper investigates the possibilities of using carbon fiber as an inductor material by analyzing its inductive properties. Various shapes such as rectangular, spiral, helical, and cylindrical line structures have been simulated under various constraints using simulation software. Hardware implementations were also tested and both simulation and hardware results show that carbon fibers have the potential to replace copper inductor lines. The implemented spiral inductor produced a quality factor of 40 while producing an inductance of 4 nH at 1.2 GHz frequency.

Cytocompatibility of Carbon Nanofiber Materials for Neural Applications

2003 ◽  
Vol 774 ◽  
Author(s):  
Janice L. McKenzie ◽  
Michael C. Waid ◽  
Riyi Shi ◽  
Thomas J. Webster
Keyword(s):  
Carbon Fiber ◽  
Surface Energy ◽  
Carbon Nanofibers ◽  
Carbon Fibers ◽  
Carbon Nanofiber ◽  
Fiber Composite ◽  
Scar Tissue ◽  
Pc 12 Cells ◽  
Low Surface Energy ◽  
Poly Carbonate

AbstractSince the cytocompatibility of carbon nanofibers with respect to neural applications remains largely uninvestigated, the objective of the present in vitro study was to determine cytocompatibility properties of formulations containing carbon nanofibers. Carbon fiber substrates were prepared from four different types of carbon fibers, two with nanoscale diameters (nanophase, or less than or equal to 100 nm) and two with conventional diameters (or greater than 200 nm). Within these two categories, both a high and a low surface energy fiber were investigated and tested. Astrocytes (glial scar tissue-forming cells) and pheochromocytoma cells (PC-12; neuronal-like cells) were seeded separately onto the substrates. Results provided the first evidence that astrocytes preferentially adhered on the carbon fiber that had the largest diameter and the lowest surface energy. PC-12 cells exhibited the most neurites on the carbon fiber with nanodimensions and low surface energy. These results may indicate that PC-12 cells prefer nanoscale carbon fibers while astrocytes prefer conventional scale fibers. A composite was formed from poly-carbonate urethane and the 60 nm carbon fiber. Composite substrates were thus formed using different weight percentages of this fiber in the polymer matrix. Increased astrocyte adherence and PC-12 neurite density corresponded to decreasing amounts of the carbon nanofibers in the poly-carbonate urethane matrices. Controlling carbon fiber diameter may be an approach for increasing implant contact with neurons and decreasing scar tissue formation.

Preparation of polyacrylonitrile–natural polymer composite precursors for carbon fiber using ionic liquid co solvent solutions

2014 ◽  
Vol 2 (10) ◽  
pp. 3424-3429 ◽  
Author(s):  
Nolene Byrne ◽  
Alexis Leblais ◽  
Bronwyn Fox
Keyword(s):  
Ionic Liquid ◽  
Carbon Fiber ◽  
Polymer Composite ◽  
Carbon Fibers ◽  
Low Cost ◽  
Environmentally Friendly ◽  
Natural Polymer

We report on the use of ionic liquid co-solvents in the preparation of polyacrylonitrile–natural polymer carbon fibers as low cost environmentally friendly alternatives to conventional carbon fibers precursors and processing solvents.

scholarly journals Mace-like carbon fibers/ZnO nanorods composites derived from Typha orientalis as ultralight and high-performance electromagnetic wave absorber

2021 ◽  
Author(s):  
Yanyan Dong ◽  
Xiaojie Zhu ◽  
Fei Pan ◽  
Baiwen Deng ◽  
Zhicheng Liu ◽  
...  
Keyword(s):  
Electromagnetic Wave ◽  
Carbon Fiber ◽  
Carbon Fibers ◽  
Low Cost ◽  
Zno Nanorods ◽  
Hydrothermal Process ◽  
Hollow Structure ◽  
Filling Ratio ◽  
Impedance Match ◽  
Typha Orientalis

Abstract Inspired by the nature, biomass-derived carbon attracts many attentions as the electromagnetic wave absorption (EMA) material owing to its advantages including abundant, low cost, renewable and environmentally friendly. However, it is difficult to make further breakthrough in effective absorption bandwidth (EAB) due to the impedance mismatch. In this work, mace-like carbon fibers/ZnO nanorods composites (BDCFs@ZnO) derived from Typha orientalis were prepared via a carbonization process and a subsequent hydrothermal process for the first time. The unique hollow structure of BDCFs and the construction of 3D interconnected conductive network led to the strong conduction loss and multiple reflection. The BDCFs sample possesses an excellent EMA performance with an ultralow filling ratio of only 5wt%. After directionally growing of the ZnO nanorods, an exceptional RL of -62.35 dB at 14.12 GHz and the EAB achieves 6.8 GHz at the thickness of 2.29 mm at a filling ratio of 15wt% were revealed. Mace-like ZnO with suitable permittivity effectively avoid the reflection result from direct contraction between EMW and carbon fiber, further improving impedance match. Simultaneously, a dielectric sum-quotient model was proposed to analyze the EMA performance of the samples. This work not only offers an inspiration for the development of dielectric loss-type EMA materials with lightweight and strong EMA performance by a sustainable, low-cost and easily available approach, but also provides an important strategy toward biomass-derived carbon-fiber-based composites in other fields.

Carbon Nanofiber Surface Roughness Increases Osteoblast Adhesion

2003 ◽  
Vol 774 ◽  
Author(s):  
Karen S. Ellison ◽  
Rachel L. Price ◽  
Karen M. Haberstroh ◽  
Thomas J. Webster
Keyword(s):  
Surface Roughness ◽  
Carbon Fiber ◽  
Carbon Nanofibers ◽  
Carbon Fibers ◽  
Carbon Nanofiber ◽  
Callus Formation ◽  
Study Results ◽  
Osteoblast Adhesion ◽  
High Degree

AbstractThe present study demonstrated for the first time desirable cytocompatibility properties of carbon nanofibers pertinent for bone prosthetic applications. Specifically, osteoblast (boneforming cells), fibroblast (cells contributing to callus formation and fibrous encapsulation events that result in implant loosening), chondrocyte (cartilage-forming cells), and smooth muscle cell (for comparison purposes) adhesion were determined on carbon nanofibers in the present in vitro study. Results provided evidence that nanometer dimension carbon fibers promoted select osteoblast adhesion, in contrast to the performance of conventional carbon fibers. Moreover, adhesion of other cells was not influenced by carbon fiber dimensions. To determine properties that selectively enhanced osteoblast adhesion, similar cell adhesion assays were performed on poly-lactic-co-glycolic (PLGA) casts of carbon fiber compacts previously tested. Compared to PLGA casts of conventional carbon fibers, results provided the first evidence of enhanced select osteoblast adhesion on PLGA casts of nanophase carbon fibers. The summation of these results demonstrate that due to a high degree of nanometer surface roughness, carbon fibers and PLGA with nanometer surface dimensions may be optimal materials to selectively increase osteoblast adhesion necessary for successful orthopedic implant applications.

Synthesis and Characterization of the Sizing Agents on the Carbon Fibers

2011 ◽  
Vol 233-235 ◽  
pp. 70-73
Author(s):  
Hong Bo Zhang ◽  
Chun Hui Su ◽  
Xiao Wei Zhu
Keyword(s):  
Carbon Fiber ◽  
Carbon Fibers ◽  
Low Cost ◽  
Process Condition ◽  
Decomposition Temperature ◽  
Synthesis Process ◽  
Optimum Process ◽  
Octyl Phenol ◽  
Sizing Agents

The recent development of carbon fiber sizing agent was introduced in this article. The sizing agent used in carbon fiber was synthesized at a temperature range of 55-60°C using epoxy resin and vinyl acetate as a monomer together, octyl phenol ethoxylated(OP-10) as the emulsion agent, ammonium peroxydisulfate as the solicitation agent and water as the dispersant. At the same time, the optimum composition, the optimum process condition and the effects affecting the emulsion stability were discussed. The characterizations were measured by Scanning Electron Microscopy and TG. The results show that the synthesis process is simple, low cost, less polution and remarkbably stable. The diameter of the particle is 1.8μm and the decomposition temperature is 260°C.

scholarly journals Design of Low Cost Carbon Fiber Composites via Examining the Micromechanical Stress Distributions in A42 Bean-Shaped versus T650 Circular Fibers

2021 ◽  
Vol 5 (11) ◽  
pp. 294
Author(s):  
Imad Hanhan ◽  
Michael D. Sangid
Keyword(s):  
Carbon Fiber ◽  
Carbon Fibers ◽  
Fiber Composite ◽  
Low Cost ◽  
Complex Loading ◽  
Fiber Composites ◽  
Production Costs ◽  
Carbon Fiber Composites ◽  
Stress Distributions ◽  
Carbon Fiber Composite

Recent advancements have led to new polyacrylonitrile carbon fiber precursors which reduce production costs, yet lead to bean-shaped cross-sections. While these bean-shaped fibers have comparable stiffness and ultimate strength values to typical carbon fibers, their unique morphology results in varying in-plane orientations and different microstructural stress distributions under loading, which are not well understood and can limit failure strength under complex loading scenarios. Therefore, this work used finite element simulations to compare longitudinal stress distributions in A42 (bean-shaped) and T650 (circular) carbon fiber composite microstructures. Specifically, a microscopy image of an A42/P6300 microstructure was processed to instantiate a 3D model, while a Monte Carlo approach (which accounts for size and in-plane orientation distributions) was used to create statistically equivalent A42/P6300 and T650/P6300 microstructures. First, the results showed that the measured in-plane orientations of the A42 carbon fibers for the analyzed specimen had an orderly distribution with peaks at |ϕ|=0∘,180∘. Additionally, the results showed that under 1.5% elongation, the A42/P6300 microstructure reached simulated failure at approximately 2108 MPa, while the T650/P6300 microstructure did not reach failure. A single fiber model showed that this was due to the curvature of A42 fibers which was 3.18 μm−1 higher at the inner corner, yielding a matrix stress that was 7 MPa higher compared to the T650/P6300 microstructure. Overall, this analysis is valuable to engineers designing new components using lower cost carbon fiber composites, based on the micromechanical stress distributions and unique packing abilities resulting from the A42 fiber morphologies.

Improvement of quality of carbon fiber rods by the impregnation of carbon fibers with oligoorganosiloxanes

2021 ◽  
Vol 70 (4) ◽  
pp. 767-772
Author(s):  
N. G. Mazhorova ◽  
P. V. Ivanov ◽  
O. V. Zaichenko ◽  
A. V. Lakhin ◽  
S. Yu. Kanterin ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Carbon Fibers

scholarly journals Lightweight Cellulose/Carbon Fiber Composite Foam for Electromagnetic Interference (EMI) Shielding

Polymers ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 1319 ◽  
Author(s):  
Ran Li ◽  
Huiping Lin ◽  
Piao Lan ◽  
Jie Gao ◽  
Yan Huang ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
Carbon Fibers ◽  
Electromagnetic Interference ◽  
Fiber Composite ◽  
Carbon Fiber Composites ◽  
Shielding Effectiveness ◽  
Electromagnetic Interference Shielding ◽  
Carbon Fiber Composite ◽  
Foaming Process ◽  
Long Carbon Fibers

Lightweight electromagnetic interference shielding cellulose foam/carbon fiber composites were prepared by blending cellulose foam solution with carbon fibers and then freeze drying. Two kinds of carbon fiber (diameter of 7 μm) with different lengths were used, short carbon fibers (SCF, L/D = 100) and long carbon fibers (LCF, L/D = 300). It was observed that SCFs and LCFs built efficient network structures during the foaming process. Furthermore, the foaming process significantly increased the specific electromagnetic interference shielding effectiveness from 10 to 60 dB. In addition, cellulose/carbon fiber composite foams possessed good mechanical properties and low thermal conductivity of 0.021–0.046 W/(m·K).

scholarly journals Absorption and Strength Properties of Short Carbon Fiber Reinforced Mortar Composite

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 300
Author(s):  
Md. Safiuddin ◽  
George Abdel-Sayed ◽  
Nataliya Hearn
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Water Absorption ◽  
Carbon Fibers ◽  
Strength Properties ◽  
Fiber Content ◽  
Test Results ◽  
Air Content ◽  
Entrapped Air ◽  
Short Carbon

This paper presents the water absorption and strength properties of short carbon fiber reinforced mortar (CFRM) composite. Four CFRM composites with 1%, 2%, 3%, and 4% short pitch-based carbon fibers were produced in this study. Normal Portland cement mortar (NCPM) was also prepared for use as the control mortar. The freshly mixed mortar composites were tested for workability, wet density, and entrapped air content. In addition, the hardened mortar composites were examined for compressive strength, splitting tensile strength, flexural strength, and water absorption at the ages of 7 and 28 days. The effects of different carbon fiber contents on the tested properties were observed. Test results showed that the incorporation of carbon fibers decreased the workability and wet density, but increased the entrapped air content in mortar composite. Most interestingly, the compressive strength of CFRM composite increased up to 3% carbon fiber content and then it declined significantly for 4% fiber content, depending on the workability and compaction of the mortar. In contrast, the splitting tensile strength and flexural strength of the CFRM composite increased for all fiber contents due to the greater cracking resistance and improved bond strength of the carbon fibers in the mortar. The presence of short pitch-based carbon fibers significantly strengthened the mortar by bridging the microcracks, resisting the propagation of these minute cracks, and impeding the growth of macrocracks. Furthermore, the water absorption of CFRM composite decreased up to 3% carbon fiber content and then it increased substantially for 4% fiber content, depending on the entrapped air content of the mortar. The overall test results suggest that the mortar with 3% carbon fibers is the optimum CFRM composite based on the tested properties.

Sign in / Sign up

Export Citation Format

Share Document