scholarly journals A Coupled Model for Solution Flow and Bioleaching Reaction Based on the Evolution of Heap Pore Structure

2014 ◽  
Vol 2014 ◽  
pp. 1-6
Author(s):  
Shenghua Yin ◽  
Xun Chen ◽  
Chi Ma ◽  
Leiming Wang ◽  
Aixiang Wu
Keyword(s):  
Coupled Model ◽  
Small Particles ◽  
Copper Ore ◽  
Solution Flow ◽  
Pore Evolution ◽  
Main Factors ◽  
Set Up ◽  
Seepage Law ◽  
Leaching Reaction ◽  
The Relationship

Based on the basic seepage law, equations have been derived to descript the solution flow within the copper ore heap which is treated as anisotropy porous media. The relationship between heap permeability and pore ratio has been revealed. Given the consideration of cover pressure and particle dissolution, pore evolution model has been set up. The pore evolution mechanism, due to the process of dissolution, precipitation, blockage, collapse, and caking, has been investigated. The comprehensive model for pore evolution and solution flow under the effect of solute transport and leaching reaction has been established. A trapezoidal heap was calculated, and the estimated results show that permeability decreases with the decreasing of pore ratio. Therefore, the permeability of the heap with small particles is relatively low because of its low pore ratio. Furthermore, permeability and height are found to be the two main factors influencing the solution flow.

Research of Shell PTDF Shrink Model

2014 ◽  
Vol 494-495 ◽  
pp. 332-336 ◽  
Author(s):  
Hong Jun Li ◽  
Dong Feng Wang ◽  
Long Yan ◽  
Xing Tang ◽  
Zhi Quan Xiao
Keyword(s):  
Regression Analysis ◽  
Analysis Data ◽  
Variance Analysis ◽  
Analysis Method ◽  
Pressure Time ◽  
Two Factors ◽  
Main Factors ◽  
Set Up ◽  
The Relationship ◽  
Tube Shell

Stress (P) and pressure time (T) are the two main factors which affect the bayonet tube shell shrinking size. In this paper, we study this two factors. Double factors regression analysis and variance analysis method were used to analysis data. PT tube shell shrinkage model is set up to explore the correlation of tube shell shrinkage size and pressure (P) and the pressure time (T) and its change rule. Results show that the established PT contraction model can well reflect the relationship between the tube shell shrinkage size and the PT factors.

Dimension Analysis of Dynamic Response of Cylinder Shell under Impact

2013 ◽  
Vol 275-277 ◽  
pp. 702-706
Author(s):  
Dao Rong Wang ◽  
Jia Qi Liu ◽  
Hong Jie Li ◽  
Ju Yan Zhao
Keyword(s):  
Dynamic Response ◽  
Independent Variables ◽  
Physical Problems ◽  
Dimension Analysis ◽  
Dependent Variables ◽  
Factors Of Influence ◽  
Main Factors ◽  
Set Up ◽  
Relationship Of ◽  
The Relationship

Dimension analysis is one of the important methods to study physical problems. Dynamic response of cylinder shell under impact is a pervasive problem in engineering domain. The paper took a cylinder shell as an objective to study the main factors of influence on dynamic response of cylinder shell under impact. Using theorem we obtained several different equations for describing the dynamic response of cylinder shell under different similarity conditions. The relationship of dynamic response of dimensionless independent variables versus dependent variables for cylinder shell is set up in the end.

The Effects of Drying Techniques on Clay-Rich Soil Texture

1974 ◽  
Vol 32 ◽  
pp. 466-467
Author(s):  
T. G. Naymik
Keyword(s):  
Critical Point ◽  
Liquid Nitrogen ◽  
Liquid Nitrogen Temperature ◽  
Drying Methods ◽  
Air Drying ◽  
Freeze Dried ◽  
Critical Point Drying ◽  
Set Up ◽  
The Relationship ◽  
Quartz Grains

Three techniques were incorporated for drying clay-rich specimens: air-drying, freeze-drying and critical point drying. In air-drying, the specimens were set out for several days to dry or were placed in an oven (80°F) for several hours. The freeze-dried specimens were frozen by immersion in liquid nitrogen or in isopentane at near liquid nitrogen temperature and then were immediately placed in the freeze-dry vacuum chamber. The critical point specimens were molded in agar immediately after sampling. When the agar had set up the dehydration series, water-alcohol-amyl acetate-CO2 was carried out. The objectives were to compare the fabric plasmas (clays and precipitates), fabricskeletons (quartz grains) and the relationship between them for each drying technique. The three drying methods are not only applicable to the study of treated soils, but can be incorporated into all SEM clay soil studies.

Convergent Beam Electron Diffraction Zone Axis Pattern Map of Zirconium

1990 ◽  
Vol 48 (2) ◽  
pp. 496-497
Author(s):  
E. Silva ◽  
R. Scozia
Keyword(s):  
Electron Diffraction ◽  
Convergent Beam Electron Diffraction ◽  
Zone Axis ◽  
Pole Piece ◽  
Small Particles ◽  
Present Communication ◽  
Beam Electron ◽  
Zero Layer ◽  
Set Up ◽  
Convergent Beam

The purpose in obtaining zone axis pattern map (zap map) from a given material is to provide a quick and reliable tool to identify cristaline phases, and crystallographic directions, even in small particles. Bend contours patterns and Kossel lines patterns maps from Zr single crystal in the [0001] direction have been presented previously. In the present communication convergent beam electron diffraction (CBED) zap map of Zr will be shown. CBED patterns were obtained using a Philips microscope model EM300, which was set up to carry out this technique. Convergent objective upper pole piece for STEM and some electronic modifications in the lens circuits were required, furthermore the microscope was carefully cleaned and it was operated at a vacuum eminently good.CBED patterns in the Zr zap map consist of zero layer disks, showing fine details within them which correspond to intersecting set of higher order Laue zone (HOLZ) deficiency lines.

Work Stress and Organisational Citizenship Behaviours (OCBs) in Call Centers Employees

2015 ◽  
Vol 3 (1) ◽  
Author(s):  
Sunita ◽  
Urvashi Singh ◽  
Shalini Singh ◽  
Rajnee Sharma
Keyword(s):  
Negative Impact ◽  
Call Centers ◽  
Negative Relationship ◽  
Married Couples ◽  
Call Centre ◽  
Simple Correlation ◽  
Nuclear Families ◽  
Set Up ◽  
Stress At Work ◽  
The Relationship

The present study was conducted to examine the relationship between organisational stress and organisational citizenship behaviours (OCBs) in employees of call centers. The study also further explored as how stress at work set-up has negative impact on OCBs. A sample of 250 employees working in call centre of Gurgaon belonging to an age group of 25-30 years were selected on availability basis. All were working married couples living in nuclear families. Job stress survey (Spielberger & Vagg, 1999) and Organisational Citizenship Behaviour (Bateman & Organ, 1983) were administered. Data was analysed by using simple correlation and multiple regression. Results showed the negative relationship between organisational stress and OCBs. Results of regression analysis also exhibited the negative impact of stress on OCBs. The implications for the employees are discussed.

A Study on the Relationship Between Psychological Climate, Employee Engagement and Organizational Citizenship Behavior

2015 ◽  
Vol 6 (2) ◽  
Author(s):  
Ginu George ◽  
Binoy Joseph
Keyword(s):  
Employee Engagement ◽  
Organizational Citizenship ◽  
Organizational Citizenship Behavior ◽  
Academic Research ◽  
Psychological Climate ◽  
Citizenship Behavior ◽  
Set Up ◽  
Relationship Of ◽  
The Relationship

Employee engagement is becoming an important area of focus by many HR consultancies in the recent years. Organizations having engaged employees tend to out-perform than employees who are not engaged or disengaged, also it will enable them to compete better in their industry resulting in higher performance, lower turnover, more profitability etc., Despite of all this there are still some industries who are ignorant and neglect the importance of having engaged employees. Therefore there is a necessity for more of academic research on employee engagement which helps in creating awareness to these organizations about the prominence of focusing on employee engagement and the findings will also augments the existing literature on employee engagement. The study was conducted on 433 employees working in travel organizations set up in Bangalore with the purpose of determining the relationship psychological climate (antecedent) has on employee engagement and in turn its relationship with organizational citizenship behavior (outcome). The study also determines the mediating relationship of employee engagement between PC and OCB.

scholarly journals Application of intelligent orienteering based on Internet of things

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Donghui Zhang ◽  
Ruijie Liu
Keyword(s):  
Internet Of Things ◽  
Network Architecture ◽  
Emergency Services ◽  
Simulation Experiment ◽  
Experimental Studies ◽  
Signal Stability ◽  
Anchor Nodes ◽  
Set Up ◽  
The Relationship ◽  
The Internet Of Things

Abstract Orienteering has gradually changed from a professional sport to a civilian sport. Especially in recent years, orienteering has been widely popularized. Many colleges and universities in China have also set up this course. With the improvement of people’s living conditions, orienteering has really become a leisure sport in modern people’s life. The reduced difficulty of sports enables more people to participate, but it also exposes a series of problems. As the existing positioning technology is relatively backward, the progress in personnel tracking, emergency services, and other aspects is slow. To solve these problems, a new intelligent orienteering application system is developed based on the Internet of things. ZigBee network architecture is adopted in the system. ZigBee is the mainstream scheme in the current wireless sensor network technology, which has many advantages such as convenient carrying, low power consumption, and signal stability. Due to the complex communication environment in mobile signal, the collected information is processed by signal amplification and signal anti-interference technology. By adding anti-interference devices, video isolators and other devices, the signal is guaranteed to the maximum extent. In order to verify the actual effect of this system, through a number of experimental studies including the relationship between error and traffic radius and the relationship between coverage and the number of anchor nodes, the data shows that the scheme studied in this paper has a greater improvement in comprehensive performance than the traditional scheme, significantly improving the accuracy and coverage. Especially the coverage is close to 100% in the simulation experiment. This research has achieved good results and can be widely used in orienteering training and competition.

The Influencing Factors and Assessment Rule of Fatigue Life of Shaft Based on Product Lifecycle Management

2007 ◽  
Vol 561-565 ◽  
pp. 2253-2256 ◽  
Author(s):  
You Tang Li ◽  
Ping Ma ◽  
Jun Tian Zhao
Keyword(s):  
Fatigue Life ◽  
Influencing Factors ◽  
Axial Stress ◽  
Assessment Method ◽  
Product Lifecycle Management ◽  
Product Lifecycle ◽  
Fatigue Design ◽  
Main Factors ◽  
Set Up ◽  
Lifecycle Management

Product lifecycle management is one of the main developmental aspects of advanced manufacturing technology. Anti-fatigue design is the key content in product lifecycle management. For designing the fatigue life of shaft exactly and determining the assessment method, the influencing factors must be realized roundly. The mechanical model of shaft is set up at first, and then the main factors that affect the fatigue life of shaft is discussed, the interrelations of the main factors and the framework are founded. The assessment equation of fatigue life for shaft is put forward and the influencing coefficient of multi-axial stress to fatigue life is analyzed. The results of this paper will establish the base of anti-fatigue and assessment life of shaft.

SET UP FOR GROWTH? — AN EXPLORATORY ANALYSIS OF THE RELATIONSHIP OF GROWTH INTENTION AND BUSINESS MODELS

2015 ◽  
Vol 19 (06) ◽  
pp. 1540009 ◽  
Author(s):  
SARAH MAHDJOUR
Keyword(s):  
Business Models ◽  
Theory Of The Firm ◽  
Past Research ◽  
Business Owners ◽  
Competitive Strategies ◽  
Consulting Services ◽  
And Performance ◽  
Set Up ◽  
Relationship Of ◽  
The Relationship

What do growth-oriented business models look like? While several economic theories, such as the theory of the firm, are based on the assumption that firms aim to maximise their profits, past research has shown that growth intention is heterogeneous among firms and that many business owners prefer to keep their firm at a size that they can manage with few resources. This paper explores the relationship of growth intention and business models, based on a sample of 135 German ICT businesses. Following an exploratory approach, Mann–Whitney U tests are applied to analyse how different business model designs correspond with different levels of growth intention. The results indicate that growth intention relates to business owners’ decisions regarding the provision of consulting services, the level of standardisation in offered products and services, the choice of addressed markets, the implementation of competitive strategies based on cost efficiency and of revenue streams based on one-time- and performance-based payments. Furthermore, the results show that growth oriented firms are no more likely than non-growth oriented firms to adapt their business models dynamically to changed internal or external conditions.

Islam, nationalism and state in the Muslim Caucasus

2014 ◽  
Vol 1 (2) ◽  
pp. 1-21
Author(s):  
Galina Yemelianova
Keyword(s):  
Continuous Process ◽  
Well Being ◽  
Seventh Century ◽  
Russian Orthodox ◽  
North Caucasus ◽  
The Caucasus ◽  
Russian North ◽  
Set Up ◽  
The Relationship

Following the break-up of the USSR in 1991 the Muslim peoples of the Caucasus – corresponding to present-day Azerbaijan and the Russian North Caucasus – have been in a continuous process of renegotiating their Islamic identity and the role of Islam in the processes of nation-building. This has involved a complex set of factors, including the correlation between the rise of Islam and socio-economic well-being (or the lack of it), the level and longevity of Islamic heritage, the relationship between Islam and the nature of the ruling post-Soviet Caucasian regimes, and the degree of susceptibility to the region’s exposure to foreign influences, Islamic and Western. This article examines some of these factors from an historical perspective, concentrating on how the political elites and the populace variously dealt with essentially external influences in the course of their centuries-long incorporation within successive political empires. From the seventh century AD these were Islamic, emanating from the Umayyad, Abbasid, Timurid, Ottoman and Safavid empires; and from the nineteenth century, Russian Orthodox and Soviet atheist. An analysis of the dynamics set up by these influences and the distinctively Caucasian Muslim responses to them is crucial in understanding how current elites and their antagonists in the region embrace, reject and otherwise instrumentalise Islam.

Sign in / Sign up

Export Citation Format

Share Document