scholarly journals Mineralogical and Geochemical Characterization of Gold Bearing Quartz Veins and Soils in Parts of Maru Schist Belt Area, Northwestern Nigeria

2014 ◽  
Vol 2014 ◽  
pp. 1-17 ◽  
Author(s):  
Samson Adeleke Oke ◽  
Akinlolu Festus Abimbola ◽  
Dieter Rammlmair
Keyword(s):  
Gold Content ◽  
X Ray Diffraction ◽  
Geochemical Characterization ◽  
X Ray ◽  
Quartz Veins ◽  
Magmatic Fluids ◽  
Geochemical Association ◽  
Ore Minerals ◽  
Gold Bearing

Epigenetic, N-S, NNE-SSW quartz veins crosscut metapelites and metagabbro in Maru area. The objectives of this work were to study field, mineralogy, and geochemical characteristics of gold bearing quartz veins and soils. Euhedral and polygonal magnetite with hematite constituted the major ore minerals. Quartz occurred as main gangue phase with appreciable sericite and chlorite. The mineralogy of soil retrieved from twelve minor gold fields examined with X-ray diffraction is quartz ± albite ± microcline ± muscovite ± hornblende ± magnetite ± illite ± kaolinite ± halloysite ± smectite ± goethite ± vermiculite ± chlorite. The concentration of gold in quartz vein varies from 10.0 to 6280.0 ppb with appreciable Pb (3.5–157.0 ppm) and ΣREE (3.6 to 82.9 ppm). Gold content in soil varies from <5.0 to 5700.0 ppb. The soil is characterized by As ± Sb gold’s pathfinder geochemical association. Multidata set analysis revealed most favourable areas for gold. Possibility of magmatic fluids as part of ore constituents is feasible due to presence of several intrusions close to quartz veins. Based on field, mineralogical, and geochemical evidences, ore fluids may have been derived from fracturing, metamorphic dewatering, crustal devolatilization of sedimentary, gabbroic protoliths, and emplaced in an orogenic setting.

Mineralogical and geochemical characterization of archaeological ceramics from the 16th century El Badi Palace, Morocco

Clay Minerals ◽  
2018 ◽  
Vol 53 (3) ◽  
pp. 459-470
Author(s):  
Mouhssin El Halim ◽  
Lahcen Daoudi ◽  
Meriam El Ouahabi ◽  
Valérie Rousseau ◽  
Catherine Cools ◽  
...  
Keyword(s):  
Sixteenth Century ◽  
Chemical Characterization ◽  
Raw Material ◽  
Maximum Temperature ◽  
X Ray Diffraction ◽  
Archaeological Ceramics ◽  
Geochemical Characterization ◽  
X Ray ◽  
Firing Tests

ABSTRACTTextural, mineralogical and chemical characterization of archaeological ceramics (zellige) from El Badi Palace (Marrakech, Morocco), the main Islamic monument from the Saadian period (sixteenth century), has been performed to enhance restoration and to determine the technology of manufacturing. A multi-analytical approach based on optical and scanning electron microscopy, cathodoluminescence, X-ray fluorescence and X-ray diffraction was used. Re-firing tests on ceramic supports were also performed to determine the firing temperatures used by the Saadian artisans. A calcareous clay raw material was used to manufacture these decorative ceramics. The sherds were fired at a maximum temperature of 800°C in oxidizing atmosphere. The low firing temperature for ‘zellige’ facilitates cutting of the pieces, but also causes fragility in these materials due to the absence of vitreous phases.

The Use of Advanced Analytical Techniques for Characterization of the Chemical, Physical, and Crystallographic Nature of a Surface

1973 ◽  
Vol 31 ◽  
pp. 132-133 ◽  
Author(s):  
R. E. Herfert
Keyword(s):  
Surface Characterization ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Depth Of Penetration ◽  
X Ray ◽  
The Past ◽  
Transmission Electron ◽  
Scanning Electron

Studies of the nature of a surface, either metallic or nonmetallic, in the past, have been limited to the instrumentation available for these measurements. In the past, optical microscopy, replica transmission electron microscopy, electron or X-ray diffraction and optical or X-ray spectroscopy have provided the means of surface characterization. Actually, some of these techniques are not purely surface; the depth of penetration may be a few thousands of an inch. Within the last five years, instrumentation has been made available which now makes it practical for use to study the outer few 100A of layers and characterize it completely from a chemical, physical, and crystallographic standpoint. The scanning electron microscope (SEM) provides a means of viewing the surface of a material in situ to magnifications as high as 250,000X.

High Resolution Replication of Organoclay Surfaces

1982 ◽  
Vol 40 ◽  
pp. 576-577
Author(s):  
W. W. Barker ◽  
W. E. Rigsby ◽  
V. J. Hurst ◽  
W. J. Humphreys
Keyword(s):  
Clay Mineral ◽  
Organic Molecule ◽  
Organic Molecules ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Naturally Occurring ◽  
Silicate Layers ◽  
Mineral Identification

Experimental clay mineral-organic molecule complexes long have been known and some of them have been extensively studied by X-ray diffraction methods. The organic molecules are adsorbed onto the surfaces of the clay minerals, or intercalated between the silicate layers. Natural organo-clays also are widely recognized but generally have not been well characterized. Widely used techniques for clay mineral identification involve treatment of the sample with H2 O2 or other oxidant to destroy any associated organics. This generally simplifies and intensifies the XRD pattern of the clay residue, but helps little with the characterization of the original organoclay. Adequate techniques for the direct observation of synthetic and naturally occurring organoclays are yet to be developed.

Synthesis and characterization of TiN / Ti / AISI 410 coatings

2018 ◽  
Vol 2 (1) ◽  
pp. 7
Author(s):  
S Chirino ◽  
Jaime Diaz ◽  
N Monteblanco ◽  
E Valderrama
Keyword(s):  
Synthesis And Characterization ◽  
Photoemission Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Columnar Grains ◽  
Tin Thin Films ◽  
Steel Aisi ◽  
Interacting Surfaces ◽  
Stainless Steel Aisi

The synthesis and characterization of Ti and TiN thin films of different thicknesses was carried out on a martensitic stainless steel AISI 410 substrate used for tool manufacturing. The mechanical parameters between the interacting surfaces such as thickness, adhesion and hardness were measured. By means of the scanning electron microscope (SEM) the superficial morphology of the Ti/TiN interface was observed, finding that the growth was of columnar grains and by means of EDAX the existence of titanium was verified.  Using X-ray diffraction (XRD) it was possible to observe the presence of residual stresses (~ -3.1 GPa) due to the different crystalline phases in the coating. Under X-ray photoemission spectroscopy (XPS) it was possible to observe the molecular chemical composition of the coating surface, being Ti-N, Ti-N-O and Ti-O the predominant ones.

Studies on the Preparation, Characterization and Solubility of -Cyclodextrin-Roxythromycin Inclusion Complexes

2009 ◽  
Vol 2 (2) ◽  
pp. 523-530
Author(s):  
D. Nagasamy Venkatesh ◽  
S. Karthick ◽  
M. Umesh ◽  
G. Vivek ◽  
R.M. Valliappan ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Inclusion Complexes ◽  
Phase Solubility ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ir Studies ◽  
Poorly Soluble ◽  
Poorly Soluble Drug

Roxythromycin/ β-cyclodextrin (Roxy/ β-CD) dispersions were prepared with a view to study the influence of β-CD on the solubility and dissolution rate of this poorly soluble drug. Phase-solubility profile indicated that the solubility of roxythromycin was significantly increased in the presence of β-cyclodextrin and was classified as AL-type, indicating the 1:1 stoichiometric inclusion complexes. Physical characterization of the prepared systems was carried out by differential scanning calorimetry (DSC), X-ray diffraction studies (XRD) and IR studies. Solid state characterization of the drug β-CD binary system using XRD, FTIR and DSC revealed distinct loss of drug crystallinity in the formulation, ostensibly accounting for enhancement of dissolution rate.

New Coordination Compounds of Fe(III) with Organic Ligands

2009 ◽  
Vol 59 (12) ◽  
Author(s):  
Mihaela Flondor ◽  
Ioan Rosca ◽  
Doina Sibiescu ◽  
Mihaela-Aurelia Vizitiu ◽  
Daniel-Mircea Sutiman ◽  
...  
Keyword(s):  
Chemical Analysis ◽  
Complex Compounds ◽  
Organic Ligands ◽  
X Ray Diffraction ◽  
X Ray ◽  
Elemental Chemical Analysis ◽  
Structural Formulae ◽  
Paramagnetic Properties

In this paper the synthesis and the study of some complex compounds of Fe(III) with ligands derived from: 2-(4-chloro-phenylsulfanyl)-1-(2-hydroxy-3,5-diiodo-phenyl)-ethanone (HL1), 1-(3,5-dibromo-2-hydroxy-phenyl)-2-phenylsulfanyl-ethanone(HL2), and 2-(4-chloro-phenylsulfanyl)-1-(3,5-dibromo-2-hydroxy-phenyl)-ethanone (HL3) is presented. The characterization of these complexes is based on method as: the elemental chemical analysis, IR and ESR spectroscopy, M�ssbauer, the thermogravimetric analysis and X-ray diffraction. Study of the IR and chemical analysis has evidenced that the precipitates form are a complexes and the combination ratio of M:L is 1:2. The central atoms of Fe(III) presented paramagnetic properties and a octaedric hybridization. Starting from this precipitation reactions, a method for the gravimetric determination of Fe(III) with this organic ligands has been possible. Based on the experimental data on literature indications, the structural formulae of the complex compounds are assigned.

HIGH ENERGY SYNCHROTRON X-RAY MICROSPECTROSCOPY FOR GEOCHEMICAL CHARACTERIZATION OF TERRESTRIAL AND EXTRATERRESTRIAL SAMPLES

2016 ◽  
Author(s):  
Antonio Lanzirotti ◽  
◽  
Stephen R. Sutton ◽  
Matt Newville ◽  
Jeffrey P. Fitts ◽  
...  
Keyword(s):  
High Energy ◽  
Geochemical Characterization ◽  
X Ray

scholarly journals PARAGUAY BELT LITHOSTRATIGRAPHIC AND TECTONIC CHARACTERIZATION: IMPLICATIONS IN THE EVOLUTION OF THE OROGEN (MATO GROSSO-BRAZIL) / CARACTERIZAÇÃO LITOESTRATIGRÁFICA E TECTÔNICA DO CINTURÃO PARAGUAY : IMPLICAÇÕES NA EVOLUÇÃO DO ORÓGENO (MATO GROSSO-BRASIL)

2018 ◽  
Vol 3 (2) ◽  
pp. 54-73
Author(s):  
Elzio Da Silva Barboza ◽  
Anderson Costa dos Santos ◽  
Carlos José Fernandes ◽  
Mauro César Geraldes
Keyword(s):  
Gold Content ◽  
Mato Grosso ◽  
Quartz Veins ◽  
Marine Sedimentation ◽  
Amazonian Craton ◽  
Gondwana Supercontinent ◽  
Surrounding Areas ◽  
Shelf Region ◽  
High Gold Content

The Paraguay Belt is composed by sediments deposited due to extensional events followed by inversion with deformation and magmatism and lastly collision of the Amazonian Craton and Paranapanema Block. The marine sedimentation, with Neoproterozoic ages, should have occurred in a continental shelf region, at about 800-550 Ma, when the closing of many oceans gave place to the amalgamation of the Gondwana supercontinent. Three areas were selected for this study which configuration define the perpendicular profile of the Paraguay Belt and allow the characterization of the main regional structures.The structural analysis in the sites here reported and surrounding areas allow suggesting that three deformational events are recorded in the rocks of this region. The sedimentary bedding S0, marked by alternations of dark gray and whitish coloration in the seritic phyllites is folded and the axial plane (Sn) is marked by a cleavage of ardosian. These surfaces are cut by two other deformations, Sn + 1 surface that plunges at high angles to SE as fracture cleavage and Sn + 2 that is orthogonal to the previous deformations and has NW-SE direction with vertical dips, where sometimes occurs quartz veins with high gold content. The Paraguay Belt fan geometry observed in the Sn foliation was developed during the closing of a Brazilian ocean that evolved between the Paranapanema Block and the Amazonian Craton. ResumoO Cinturão Paraguai é composto por sedimentos depositados durante eventos extencionais  seguidos de inversão com deformação e magmatismo e, por último, colisão do Craton Amazônico e do Bloco Paranapanema. A sedimentação marinha, com idades Neoproterozóicas, ocorreu  em uma região de plataforma continental, entre 800-550 Ma, quando o fechamento de muitos oceanos deu lugar à fusão do supercontinente Gondwana. Três áreas foram selecionadas para este estudo cuja configuração define um  perfil perpendicular do Cinturão do Paraguai e permite a caracterização das principais estruturas regionais.A análise estrutural nos locais aqui relatados e áreas adjacentes permite sugerir que as rochas do orógeno passou por três eventos deformacionais. O acamamento  sedimentar S0, marcado por alternâncias de coloração cinza-escura e esbranquiçada nos filitos e siltitos, é dobrado e o plano axial (Sn) é marcado por uma clivagem ardosiana. Estas superfícies são cortadas por outras duas deformações, Sn + 1 que mergulha em ângulos elevados para SE como clivagem de fratura e Sn + 2 que é ortogonal às deformações anteriores e tem direção NW-SE com mergulhos verticais, onde às vezes ocorrem veios de quartzo com alto teor de ouro. A geometria em leque  do Cinturão Paraguay observada na foliação de Sn foi desenvolvida durante o fechamento de um oceano brasileiro que evoluiu entre o Bloco Paranapanema e o Craton Amazônico.

scholarly journals New Insights into the Crystal Chemistry of Elpidite, Na2Zr[Si6O15]·3H2O and (Na1+YCax□1−X−Y)Σ=2Zr[Si6O15]·(3−X)H2O, and Ab Initio Modeling of IR Spectra

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2160
Author(s):  
Alexander Bogdanov ◽  
Ekaterina Kaneva ◽  
Roman Shendrik
Keyword(s):  
Ir Spectra ◽  
Structural Models ◽  
Chemical Characterization ◽  
Chemical Compositions ◽  
X Ray Diffraction ◽  
Special Group ◽  
X Ray ◽  
Influence Of Water ◽  
Radioactive Species

Elpidite belongs to a special group of microporous zirconosilicates, which are of great interest due to their capability to uptake various molecules and ions, e.g., some radioactive species, in their structural voids. The results of a combined electron probe microanalysis and single-crystal X-ray diffraction study of the crystals of elpidite from Burpala (Russia) and Khan-Bogdo (Mongolia) deposits are reported. Some differences in the chemical compositions are observed and substitution at several structural positions within the structure of the compounds are noted. Based on the obtained results, a detailed crystal–chemical characterization of the elpidites under study was carried out. Three different structure models of elpidite were simulated: Na2ZrSi6O15·3H2O (related to the structure of Russian elpidite), partly Ca-replaced Na1.5Ca0.25ZrSi6O15·2.75H2O (close to elpidite from Mongolia), and a hypothetical CaZrSi6O15·2H2O. The vibration spectra of the models were obtained and compared with the experimental one, taken from the literature. The strong influence of water molecule vibrations on the shape of IR spectra of studied structural models of elpidite is discussed in the paper.

Sign in / Sign up

Export Citation Format

Share Document